.NET (Core and Framework)

FirstPrevNext

Need guidance and proposal of design and implementation for an e-voting (electronic voting) system bahareh65515-Jul-09 23:17 bahareh655 15-Jul-09 23:17  Hi all! I want to design and implement an e-voting(electronic voting) system with two computers(one as server and the other as client) under windows; What technology or programming model do you suggest me for this purpose? I'm not familiar with network programming models in windows and need help of experience people to introduce me a suitable and applicable programming model and language for this case! One guy have suggested me to create an ActiveX on client and communicate with server through COM, what do you think about it? Please help me!!! Best Regards. Re: Need guidance and proposal of design and implementation for an e-voting (electronic voting) system K030615-Jul-09 23:38 K0306 15-Jul-09 23:38  Don't ask the same question in multiple forums. Regards, Karthik K... Suitable criteria for a distributed application Zeeshan Riaz15-Jul-09 11:32 Zeeshan Riaz 15-Jul-09 11:32  Hi cp i am new to CP. Just going to start a project for windows. Taking a quick leap to distributed application too soon. Just want to know a solution for my scenario I want to build a new windows distributed application (server/ Client). The client (.NET envoirnment)will be at a remote place outside the city (at any place) that shall be able to interact with the server (.NET envoirnment) for saving or retrieving data. On the server side the same application will be performing same tasks as the client side on LAN. There will be layers such as GUI,DAL,BLL(Bussiness logic), Controller and Data Types 1. Is it possible to have a same windows application at both sides (client and server )as i am presuming it to be? 2. What mechanism will be used for transporting data between the server and client will it be a static IP address and http or something else i dont know? 3. Windows remorting or Web services will be useful for that? i hope it will not bother anybody to help me.New to dot net so wanted to share and recieve ideas thanks Thank every helper Re: Suitable criteria for a distributed application DaveyM6915-Jul-09 13:01 DaveyM69 15-Jul-09 13:01  Zeeshan Riaz wrote: i am new to CP Just a quick recommendation for posting at CP (and most other places too) seeing as you're new, don't cross post i.e. post basically the same message in multiple forums. Pick one forum that best suits. If you're not sure, then I would post in one, and post a link to that post in another with an explanation that I wasn't sure where to post! Welcome to CP Dave BTW, in software, hope and pray is not a viable strategy. (Luc Pattyn) Visual Basic is not used by normal people so we're not covering it here. (Uncyclopedia) Why are you using VB6? Do you hate yourself? (Christian Graus) Single-instance applications and batch files supercat915-Jul-09 5:59 supercat9 15-Jul-09 5:59  If an application which is configured for single-instance operation is run from a batch file, is there any nice way to control how long the batch file waits and what error code will be returned to it? The best approach I can figure would be to have a pair of programs: a windowed application that runs single-instance, and a console application that runs multi-instance. When run, the console application would invoke the single-instance application with a parameter containing something like a TCP socket. The single-instance application could then pass back the desired error code as well as any messages it would like the console application to display. My intended use would be that the batch files do operations which may only be done one at a time, and to have the single-instance application sequence the operations, and then remain up after the operations are complete to show their status. My target platform is .net 2.0. Any ideas? Re: Single-instance applications and batch files Luc Pattyn16-Jul-09 1:36 Luc Pattyn 16-Jul-09 1:36  Hi, a single-instance app never really is single-instance. At best the second, third or whatever instance gets launched, detects it isn't number one, and exits again, hopefully after passing its work to the first instance, maybe by sending its command line through a pipe. how about you make the "single-instance" such that it: - detects it isn't the first; - sends the job to the number one instance; - instead of exiting right away, waits for completion. Doing it that way your batch files don't have to be aware, they would always seem to be talking to the single-instance app. BTW: obviously you can use the Main() method's return value as the batch/DOS exit code. Luc Pattyn [Forum Guidelines] [My Articles] The quality and detail of your question reflects on the effectiveness of the help you are likely to get. Show formatted code inside PRE tags, and give clear symptoms when describing a problem. Re: Single-instance applications and batch files supercat916-Jul-09 13:20 supercat9 16-Jul-09 13:20  What's the best way of achieving such a result in vb.net (I'm using 2005 at the moment)? Are there any nice template examples to borrow from? Re: Single-instance applications and batch files Luc Pattyn16-Jul-09 13:26 Luc Pattyn 16-Jul-09 13:26  Hi, What part are you having trouble with? What have you done so far? Anyway I use C# most of the time, so I don't have VB.NET code handy for you. Luc Pattyn [Forum Guidelines] [My Articles] The quality and detail of your question reflects on the effectiveness of the help you are likely to get. Show formatted code inside PRE tags, and give clear symptoms when describing a problem. Re: Single-instance applications and batch files supercat917-Jul-09 4:41 supercat9 17-Jul-09 4:41  I've never actually done an application with a Main() under vb.net, and the only way I've confined applications to single-instance operation is via check-box in the project options. I know that Microsoft added support for named pipes in .net 3.5, but for the moment I'm working with VS2005 and .net 2.0 which does not include the built-in support. FYI, if the "single-instance operation" box is checked in vb, the first-run instance of the application will receive a special event when an attempt is made to launch additional instances; it will receive the command line from the new instance. Very convenient, but I don't know how to have the second instance delay completion and return a particular error code. It will probably be necessary to write a custom Main() to accomplish that, or else go with a two-application approach. The only advantage to the latter would be the ability to have the command-line-launched part show text in the command-prompt window. By my understanding, windowed applications can't do that (unless I'm mistaken?) In response to something like "progger /?" it is often nicer to show a program's options in the command-prompt window than to pop up another window listing them (the exception being if there are over 24 lines of options). It's also nice to see a 'list' in the command-prompt window of what worked and what didn't. Re: Single-instance applications and batch files Luc Pattyn17-Jul-09 11:40 Luc Pattyn 17-Jul-09 11:40  Hi, OK, once more too much C# was popping up in my thinking and reply. What I called Main() would be whatever piece of your VB.NET code gets in charge first. I keep forgetting Visual for VB has special single-instance support. I don't know any details, I never used it; if I were interested, I would launch Reflector and have a peek inside. Most of my C# toolbox was created in either 1.1 or 2.0; when building for 3.x it is bound to contain P/Invoke for a couple of things that now can be handled natively. I do use P/Invoke for named pipes, as I still often build for 2.0 In order to achieve the scheme I proposed in VB.NET you most likely would have to forgo the built-in "single-instance" support, and create your own. supercat9 wrote: windowed applications can't do that Yes, it is unfortunately true. The PE file format has a single bit that chooses between: - a console app, which needs a console to run; when launched in a command prompt/DOS window, it will use that; otherwise it will create its own console window. Your app can create forms and look very much like a WinForm app, however it is a console app. It can hide its own console, but only after it has been shown briefly resulting in an ugly flash. - a non-console app. Now it again can crate forms and be a real WinForm app, or it can choose not to, and maybe show up in the systray. What it can't do is perform input/output to a command prompt/DOS window that maybe launched it. I have been struggling with this for some time, as I wanted to create apps that: - when a command line is present, behave as console apps (so you can use them silently in a batch file); - when a command line isn't present, behave as WinForm apps (so you can use them interactively). And I didn't want to create, maintain and distribute two EXEs, one for each purpose. I had to give up, IMO this historical dichotomy has proven to be a major Windows blunder. Luc Pattyn [Forum Guidelines] [My Articles] The quality and detail of your question reflects on the effectiveness of the help you are likely to get. Show formatted code inside PRE tags, and give clear symptoms when describing a problem. Re: Single-instance applications and batch files supercat917-Jul-09 13:21 supercat9 17-Jul-09 13:21  And I didn't want to create, maintain and distribute two EXEs, one for each purpose. I wonder whether it would be practical to have a "universal console application" which creates a TCP socket and then launches the other real application, prepending to the command line arguments the identity of the newly-created socket? The other application would exchange its I/O with the socket, and the console ap would send it to the console. If the two applications had a consistent naming convention, one would have to distribute both exe's but the console side application wouldn't have to be maintained. Re: Single-instance applications and batch files Luc Pattyn17-Jul-09 13:57 Luc Pattyn 17-Jul-09 13:57  Hi, interesting idea. I'm not inclined to use TCP/IP for local purposes as it may pose problems selecting channels, avoiding conflicts, configuring firewalls, etc; risks which aren't necessary as you can use named pipes equally well. And you need only one per singleton. So the singleton-enforcer could be a console app with the following syntax: enforce1 filename.exe command_line_arguments This enforce1 would: 1. algorithmically derive a pipe name form the filename.exe 2. look for a process P currently executing filename.exe, and if none found, launch filename.exe as a process P without arguments; 3. send its process ID and the command_line_arguments to P 4. wait for a return status, which I would transmit using a Windows message (based on PID). all of the above is independent of the exe's functionality. enforce1 is general-purpose. the target exe should ignore its command line; it must open and listen to the named pipe (again derived from the EXE name), expect to receive a PID+command line, and when done send a Windows message to process P with given PID to return the 32-bit result status; and loop waiting for another piped command. It may or may not use multithreading to perform several jobs concurrently. The piped message is a command line, that should be short enough to be atomic. So all enforcers can send to the same pipe without fearing collisions/confusion. One might consider a non-console version of the enforcer too. BTW: all of this does not solve my earlier quest for a single exe offering an app that acts as both console and non-console, since 1) it is two or three EXE (one universal), and 2) the console part is universal, hence ignorant of the actual application (it can't provide help for instance). Luc Pattyn [Forum Guidelines] [My Articles] The quality and detail of your question reflects on the effectiveness of the help you are likely to get. Show formatted code inside PRE tags, and give clear symptoms when describing a problem. Re: Single-instance applications and batch files supercat920-Jul-09 4:56 supercat9 20-Jul-09 4:56  enforce1 filename.exe command_line_arguments If the main application file name were derived from the command-line-app name, one could use absolutely identical command-line apps for any number of programs. The only time the console app would have to provide any "help" would be if the system couldn't find the main application, in which case a message to that effect should probably be sufficient. BTW, I vaguely recall an article which discussed having one application named xxx.com and the other xxx.exe but I don't remember exactly what the author was doing. Spell Check Recommendations musefan15-Jul-09 5:11 musefan 15-Jul-09 5:11  Hi All, I basically have a RichTextBox (WinForms) and I want to have spell check functionality. I have been using NetSpell[^] which is very good for an open source solution but have found it does not work with rich text formatted data. Being open source I can probably modify to suite my needs but that may take time I do not currently have. I have also found Rapid Spell[^] which seems perfect for what I want, but the price is $339 so I am looking for alternative, cheaper solutions if possible. Basically, does anybody know of a good product they could recommend from experience that will achieve what I am looking for? I have been looking but as of yet not found anything to top Rapid Spell. Thanks Life goes very fast. Tomorrow, today is already yesterday. Re: Spell Check Recommendations Luc Pattyn15-Jul-09 6:30 Luc Pattyn 15-Jul-09 6:30  How about using any spellchecker on the RichTextBox.Text content; and when something gets rejected try and locate it in the RTB to flag it somehow. Luc Pattyn [Forum Guidelines] [My Articles] The quality and detail of your question reflects on the effectiveness of the help you are likely to get. Show formatted code inside PRE tags, and give clear symptoms when describing a problem. Re: Spell Check Recommendations musefan15-Jul-09 6:43 musefan 15-Jul-09 6:43  Too late, bought Keyoti Rapid Spell now Life goes very fast. Tomorrow, today is already yesterday. Re: Spell Check Recommendations Luc Pattyn15-Jul-09 6:45 Luc Pattyn 15-Jul-09 6:45  OK. That is bound to become an interesting article. I'm looking forward to it. Luc Pattyn [Forum Guidelines] [My Articles] The quality and detail of your question reflects on the effectiveness of the help you are likely to get. Show formatted code inside PRE tags, and give clear symptoms when describing a problem. how to pass values from pop-up window(child page) to a master page(parant page) datagrid? please help me out [modified] staycool_khan15-Jul-09 4:11 staycool_khan 15-Jul-09 4:11  hi everyone, i m jst working on my final term project and i want to perform the follwoing action using asp.net, vb.net and javascript. "how to pass values from pop- up window(child page) to a master page(parant page) datagrid? please help me out. many thanks staycool_khan modified on Wednesday, July 15, 2009 10:20 AM Re: how to pass values from pop-up window(child page) to a master page(parant page) datagrid? please help me out Not Active15-Jul-09 4:56 Not Active 15-Jul-09 4:56  Look up window.opener. That should give you a place to start only two letters away from being an asset How to create static library in C++ .net 2008 and call it from VC6 stefanidou15-Jul-09 1:46 stefanidou 15-Jul-09 1:46  Hello, I want to create a static library using .net 2008 Framework 3.5 and export a function. In order to call this function from a vc6 enviroment what project type I should use on the .net Enviroment and how should I call this function from vc6 application? I would appreciate if you could send me a short code of both sides(.net,vc6) Thanks in advance... Re: How to create static library in C++ .net 2008 and call it from VC6 Ravi Bhavnani18-Jul-09 6:13 Ravi Bhavnani 18-Jul-09 6:13  See this[^] article. /ravi My new year resolution: 2048 x 1536 Home | Articles | My .NET bits | Freeware ravib(at)ravib(dot)com How can patch .NET assembly code ham_tim_hieu14-Jul-09 21:29 ham_tim_hieu 14-Jul-09 21:29  For programs that were created by VB or VC 6.0, there are many tools like HIEW, WINDASM, ... that can disassemble and patch codes (example: change some code lines) For programs that were created by .NET, it's easy to disassemble but I don't know which tool can do like that. Please advice me Thanks Re: How can patch .NET assembly code Luc Pattyn15-Jul-09 2:55 Luc Pattyn 15-Jul-09 2:55  Hi, Reflector can decompile an entire method. And I was told there are plug-ins that decompile an entire class. Luc Pattyn [Forum Guidelines] [My Articles] The quality and detail of your question reflects on the effectiveness of the help you are likely to get. Show formatted code inside PRE tags, and give clear symptoms when describing a problem. Re: How can patch .NET assembly code harold aptroot15-Jul-09 5:09 harold aptroot 15-Jul-09 5:09  There is a plugin for the Reflector called ReflexIl or something like that, that will let you actually edit the code. Reflector also has an MSIL view, of course. ILDASM can also disassemble .NET assemblies but be prepared for massive suckage. Re: How can patch .NET assembly code ham_tim_hieu15-Jul-09 8:09 ham_tim_hieu 15-Jul-09 8:09  Ok, I see Reflexil is great plug-in Thank you

Last Visit: 31-Dec-99 18:00     Last Update: 20-Sep-24 3:53 Refresh ᐊ Prev1...455456457458459460461462463464 Next ᐅ

General    News    Suggestion    Question    Bug    Answer    Joke    Praise    Rant    Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.