|
Thanks Dave.
The QBasic lines are as follow
349 Open "COM1:1200,O,7,1,ASC,CD0,CS0,DS0,OP0,RS,TB2048,RB2048" For Random As 2
350 Print #2, Chr$(27); "P"
The user needs to press return at line 348 then the balance value is displayed on the console.
I suppose "For Random As 2" does the job but I can't see how it would translate to C#.
I will investigate the port sniffer you mentioned.
Scalpa
|
|
|
|
|
Hi,
the code you have shown is not complete.
line 349 simply opens the serial port, and sets a lot of settings, but it does not
do any actual input/output; AFAIK RANDOM does not make for serial ports, and the
"As 2" simply means input and output statements will use a #2 to refer to it.
line 350 sends an escape (ESC) character and a letter P to the device (probably
followed by a CR/LF)
the actual input and display code must follow that. the command looks like ASCII,
so chances are the return data is a text string too, making things rather easy.
You will need some investigative work here:
- first find out what all the options in line 349 amount to, and find the equivalent
in the SerialPort class; I guess (please check all!) 1200 Baud, no parity, 7 data bits,
1 stop bit, ASCII, and the polarity of a lot of control lines;
I also guess TB and RB set buffer sizes and don't really matter.
- I don't think a sniffer would really help here, it too would require all the correct
settings
- now you could try to use a terminal emulator (such as HyperTerminal, part of Windows);
when all parms are set correctly, you could simply type ESC P (and possibly ENTER)
and read what got returned. Once this works, start coding with SerialPort.
Luc Pattyn [Forum Guidelines] [My Articles]
This month's tips:
- before you ask a question here, search CodeProject, then Google;
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get;
- use PRE tags to preserve formatting when showing multi-line code snippets.
|
|
|
|
|
Hey thanks a lot for your interest.
Here is the complete QBasics
10 Rem field bean program to recieve weights from sartorius balance
60 INPUT "DO YOU WANT HELP (Y/N)", H$
70 If H$ = "Y" Then GoTo 480
80 H$ = "N"
90 Close All
120 Print "ENTER PLOT NUMBER AS A 3 DIIGIT NUMBER 001"
121 Close #1
130 INPUT "PLOT NO ", B$
131 B$ = B$ + ".DER"
133 On Error GoTo 139
134 OPEN "I", 1, B$
136 Print "THIS PLOT HAS ALREADY BEEN MEASURED"
137 PLAY "AABBCC"
138 GoTo 120
139 Rem CLOSE #1
140 OPEN "O", 1, B$
150 Rem INPUT "ENTER NO OF VARIETIES ", V
160 C = 0
170 Rem IF C = V THEN CLOSE ALL: GOTO 880
180 C = C + 1
190 Rem FOR J = 1 TO 4
200 P = 0
210 PLAY "F"
220 Rem PRINT "VARIETY "; C: PRINT "REP "; J
230 Rem PRINT "ENTER PLOT HEADING IN FOLLOWING FORMAT"
240 Rem INPUT " PLOT NO'372' ?", PH$
250 Rem INPUT "AFPNO ?", AFP$
260 Rem PLAY "A"
280 Rem PRINT #1, PH$
285 Rem PRINT #1, AFP$
286 Let ch2$ = "1 20": Print #1, ch2$
290 Let ch$ = "29"
295 Let ch1$ = "SEEDWT"
296 Let ct$ = ch$ + ch1$
297 Print #1, ct$
300 If P = 20 Then GoTo 440
305 TIMEOUT = 10000
310 Rem Balance routine****************************
315 Print P + 1
320 INPUT "PUT SEED ON SCALES PRESS RETURN THEN TARE SCALES TO ZERO", CR$
330 P = P + 1
340 Open "COM1:1200,O,7,1,ASC,CD0,CS0,DS0,OP0,RS,TB2048,RB2048" For Random As 2
350 Print #2, Chr$(27); "P"
360 Line Input #2, W$
370 W = Val(W$): Rem W = real format of weight:REM W$ = String format of weight
380 Close #2
390 Rem End of balance routine*********************
400 Print W
410 W1$ = Mid$(W$, 7, 4)
411 If W1$ <> "0.00" Then GoTo 420
412 W1$ = "-1"
420 Print #1, W1$
430 GoTo 300
440 P = 0
450 Rem NEXT J
451 PLAY "EAG"
453 INPUT " ANOTHER PLOT Y/N ", A$
454 If A$ = "N" Then GoTo 471
460 Print "NEXT VARIETY": PLAY "B"
465 Close #1
470 RUN 90
471 Close #1
472 Cls
473 End
480 Rem HELP
490 Print " HELP FILE"
500 Print " ---- ----"
510 Print "IN ORDER FOR BALANCE.BAS TO WORK AND THE CABLE FROM BALANCE TO COMPUTER MUST BE CONNECTED PROPERLY SEE DIAG"
520 INPUT "PRESS RETURN TO CONTINUE", RT$
530 Cls
540 Print " "; " "; "-----------------"
550 Print " "; " "; "! !"
560 Print "___________________"; " "; "! !"
570 Print "! BALANCE !"; " "; "! COMPUTER !"
580 Print "! (BACK) !"; " "; "! (BACK) !"
590 Print "! !"; " "; "! !"
600 Print "! !"; " "; "! !"
610 Print "!_________________!"; " "; "!_______________!"
620 Print " __________"; " "; "___________________________________"
630 Print " ! !PLUG! !"; " "; "! !"
640 Print " ! !PORT! !"; " "; "! !!MOUSE!! !"
650 Print " !--------!"; " "; "! !"
660 Print " ^ "; " "; "! !!BALANCE!! !"
670 Print " ^ "; " "; "!--------- ^ ---------------------!"
680 Print " ^============================^"
690 INPUT "PRESS RETURN TO CONTINUE", RT$
700 Print: Print
740 Print " TO LOAD THE BALANCE PROGRAM YOU MUST BE IN C: DRIVE THEN SIMPLE TYPE": Print " 'GWBASIC BALANCE' FOLLOWED BY RETURN"
750 Print "THE PROGRAM THEN ASKS IF YOU NEED HELP TYPE 'Y' OR 'N' THEN RETURN"
760 Print "THE PROGRAM THEN ASKS FOR A FILENAME IN THE FORMAT C:\WS\FABA\filename"
770 Print "eg C:\WS\FABA\TEST.DAT"
780 Print "THE PROGRAM THEN ASKS FOR THE NUMBER OF VARIETIES"
790 Print "THE PROGRAM THEN ASKS FOR THE PLOT NUMBER IN THE CORRECT FORMAT"
800 Print "THE PROGRAM WILL BEEB IF THIS IS ENTERED INCORRECTLY."
810 Print "YOU ARE NOW READY TO WEIGH A SAMPLE OF SEED."
820 Print "SIMPLE PUT ONE SEED ON SCALES THEN PRESS RETURN WHEN HAPPY WITH WEIGHT"
830 Print "THEN TARE SCALES TO ZERO AND PUT NEXT SEED ON."
840 Print "CONTINUE FOR 20 SEEDS WHEN THE COMPUTER WILL BEEP YOU FOR NEXT REP OF VARIETY"
850 INPUT "PRESS RETURN TO CONTINUE", CR$
860 Cls
870 GoTo 80
880 PLAY "FACE": INPUT "DO YOU WANT ANOTHER RUN (Y/N) ?", R$
890 If R$ = "Y" Then GoTo 10
900 If R$ = "" Then GoTo 880
910 R$ = "N": Stop
as for Hyperterm I am unable to enter any commend in it when the balance is connected to my PC
Thanks for your help.
Scalpa
|
|
|
|
|
Scalpa wrote: 360 Line Input #2, W$
370 W = Val(W$): Rem W = real format of weight:REM W$ = String format of weight
Nice. Line 360 just reads a string, so the device outputs text, which you can look at
with HyperTerminal.
And Line 370 turns the text into a number, in C# that would be something like
int.TryParse() or float.TryParse().
As I said before, it's time to google and experiment about the control lines;
your PC probably must set some lines high/low otherwise the device may not respond.
Alternatively, you could just give it a try, open HyperTerminal, open a connection
at 1200 baud, and type ESC P ENTER, just to see what if anything comes in...
Luc Pattyn [Forum Guidelines] [My Articles]
This month's tips:
- before you ask a question here, search CodeProject, then Google;
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get;
- use PRE tags to preserve formatting when showing multi-line code snippets.
|
|
|
|
|
Luc, I really do appreciate your time an effort.
I have been on this for 2 days, hours on googles etc...
The thing is we also have a MFC application that works (not the source code though) fine but I need to do it in the .net framework for loading onto handheld devices.
I will investigate further and post the answer if even, when ever I find it.
Thanks again.
|
|
|
|
|
You're welcome.
One more idea: if your serial cable is not a commercial one, but something someone
assembled from scrap, then you might be able to see the actual number of conductors
used; the fewer there are, the fewer things you have to worry about. So if there
are only three conductors, it should always work in HyperTerminal.
If on the other hand all 9 (I presume it's a DB-9 connector) pins are wired, then
chances are you have to set all output control lines (about 3 or so) to the right
polarity.
Apart from that, there really should be no problem at all.
Luc Pattyn [Forum Guidelines] [My Articles]
This month's tips:
- before you ask a question here, search CodeProject, then Google;
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get;
- use PRE tags to preserve formatting when showing multi-line code snippets.
|
|
|
|
|
A bit of searching found this - hope it helps. With the source code you have you should be able to recreate it - Good luck
OPEN "COM1:[speed],[parity],[data],[stop]" FOR [FILEMODE] AS #FileNumber
CD0 = zero milliseconds timeout on the data carrier detect line (DCD)
CS0 = zero milliseconds timeout on the clear to send line (CTS)
DS0 = zero milliseconds timeout on the data set ready line (DS)
RS = suppress detection of request to send (RTS)
Dave
|
|
|
|
|
that is useful info, if only Scalpa gets to see it, you did reply it to me...
Luc Pattyn [Forum Guidelines] [My Articles]
This month's tips:
- before you ask a question here, search CodeProject, then Google;
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get;
- use PRE tags to preserve formatting when showing multi-line code snippets.
|
|
|
|
|
thanks to you both.
Scalpa
|
|
|
|
|
Ok, I was trying to connect a PC(XP pro) to a SARTORIUS lab balance model BP3210S and also model 1413. Via Serial rs232
I finally made it work.
The main problem was the escape sequence sent to the port.
Here is the code.
Create a Windows C# project with 1 textbox and 1 button and drop this code behind form1.
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Windows.Forms;
using System.IO.Ports;
namespace AnotherSerial
{
public partial class Form1 : Form
{
SerialPort sp = new SerialPort("COM1", 1200, Parity.Odd, 7, StopBits.One);
public Form1()
{
InitializeComponent();
//Subscrib deleguate to even
sp.DataReceived += new SerialDataReceivedEventHandler(port_DataReceived);
}
private void sendButton_Click(object sender, EventArgs e)
{
try
{
textBox1.Text = "";
char cCHR27 = (char)27;
sp.ReadTimeout = 500;
if (sp.IsOpen) sp.Close();
sp.Open();
sp.DtrEnable = true;
sp.Write(cCHR27 + "P"); 'Escape
}
catch (System.Exception ex)
{
textBox1.Text = ex.Message;
}
}
private void ReadButton_Click(object sender, EventArgs e)
{
try
{
//clear the text box
textBox1.Text = "";
//read serial port and displayed the data in text box
if (sp.IsOpen) sp.Close();
sp.Open();
//textBox1.Text = sp.Read() + " Received";
}
catch (System.Exception ex)
{
textBox1.Text = ex.Message;
}
}
private void port_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
// Event for receiving data
// Read the buffer to text box.
this.Invoke(new EventHandler(DoUpdate));
}
private void DoUpdate(object s, EventArgs e)
{
textBox1.Text = textBox1.Text + sp.ReadExisting();
}
private void Form1_Load(object sender, EventArgs e)
{
}
}
}
It works
Thanks all.
|
|
|
|
|
Hi!
I'm creating an application using C# and I need to display one or more markers in a webBrowser object using Google Maps.
The problem is that I was thinking to create only one HTML file that I could change automatically everytime I need to display something. Like this I need to edit this file with the right code (HTML and JavaScript) and than open it in the webBrowser object. This file would be located on local disk and not on a public website.
Do you think that this is the best way to do this? If not, what do you think i should do?
If it is, how can I edit a HTML file using C#?
Here's an example:
http://www.uploadhouse.com/viewfile.php?id=1267023[^]
Thanks in advance !!!
|
|
|
|
|
|
Thanks for the tip!
I'm going to take a look at the MSDN code that you post it.
Looks to me that it can help me.
However, I still don't know if this is best way to do this kind of implementation.
Any suggestions will be welcome.
Thanks!
|
|
|
|
|
I had to do the same thing last year. What I intended to be a c# application turned out to be mostly a javascript application. The only part that was c# was building the coordinate file to be used by the javascript.
MrPlankton
|
|
|
|
|
Hi, thanks for your post!
And you made it like this or not?
Can you explain me, in a very brief way, how did you implement this?
Thanks!
|
|
|
|
|
Hello!
I'm having a strange problem with a combobox I have added into my DataGridView object.
While runing my program, rows are added in to the DataGridView. When I check in the ComboBox, I can't see or use my collections items which i entered in the Edit Columns property window!  Why is this happening?
I also want to know how to insert own items to the collection while running the program.
Hope someone have some answers!
/Mc_Topaz - It's Mc, not Mac. I'm not scottish!
|
|
|
|
|
Hello,
How can I write to office word document from c# related texbox and comboboxes? Is there any article or small example about this subject?
Good Days
|
|
|
|
|
Search for 'word object model'
|
|
|
|
|
I create a DataSet with 4 tables in it from a mdb file using the Wizard of the VS Express 2008. I have a DataGridView and I display the data of the "Transaction" table. I also have a table with my suppliers called "Suppliers". In "Transaction" table I have a column called "Supplier".
I have enabled the options to add,edit or delete record in the DataSet and to save all the changes back to the mdb file. To provide an easier way for the user to add new records I set "Supplier" columnType in the DataGridView as DataGridViewComboBoxColumn and DisplayMember, DataSource and ValueMember to the "Name" column in the Supplier table so the user can directly select the name name of the supplier without having to type it.
So when I run the program and load the form I get the following error message:
System.ArgumentException: DataGridViewComboBoxCell value is not valid.
Any help would be appreciated....
Thank you
|
|
|
|
|
yeah that DataGridViewComboBoxColumn is a tricky lil bugger!
ive had a problem with mine for almost two weeks now. but my problem is that the table in question references itself
good luck tho
Harvey Saayman - South Africa
Junior Developer
.Net, C#, SQL
think BIG and kick ASS
you.suck = (you.passion != Programming)
|
|
|
|
|
Check the AutoSizeMode property of your DataGridView.
You may have set some column(s) to expand the column width to fit the data. Depending on what data you have there (or actually you don't have  ), you will get that kind of error if the lookup is turned on.
SkyWalker
|
|
|
|
|
Hi all...
I made a program in C# which takes any command and show the output in richtextBox...Everything is working fine except tht whenever i try to run my exe in some different computer it shows different error...In some computer it shows ".Net Framework Error" some computer do nothing i mean when i click on exe it do nothing and in some computer it throws exception...
I've no idea why this is happening...Can someone help me out..Am i missing anything?? I made exe in release mode...
Thnks..
Ash..
|
|
|
|
|
Make sure the different computers have the .NET framework installed and the correct version for your application.
If you make a setup project you can make it detect this and download the framework during install.
Dave
|
|
|
|
|
Thnks all
But it's very small project..It works fine in other PC's having .NET Framework..
Do i need to add some configuration file so that it works fine everywhere without taking care whether .Net Framework is installed or not..
So sorry for simple question...I just start working in c#..
Ash..
|
|
|
|
|
If the correct version of the framework isn't installed it will not run.
If the other PCs are running Vista and your app requires administrator rights then you'll need to add an application manifest so UAC prompts for it to be allowed. I've mentioned this before somewhere, I'll try and find the link.
Dave
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
