Dump Files - C / C++ / MFC Discussion Boards

Re: Disable MRU (Most Recently Used) Problem

LittleYellowBird1-Aug-03 2:48

1-Aug-03 2:48

Thanks for the suggestions. Ignoring the MRU items sounded like a good idea and fairly simple. I've successfully done this by adding a test in OnOpenDocument which aborts when it is not allowed to open files (with a helpfull message for the user telling them that what they want to do is daft!)

But the files get removed from the list because they fail to open, and the list is not grayed out. Its a good solution because the user can't destroy there own data, but its not as slick as I would like.

Copying the list and putting it back sounds ideal and I would like to try it if possible. But I have no idea how or where to do this, can you point me in the right direction?

Thanks for any help Smile | :)

,

Ali

Re: Disable MRU (Most Recently Used) Problem

Neville Franks1-Aug-03 3:59

Neville Franks

1-Aug-03 3:59

Hi Alison,
Overide CWinApp::OnOpenRecentFile() and change it as follows:

BOOL CWinApp::OnOpenRecentFile(UINT nID)
{
	ASSERT_VALID(this);
	ASSERT(m_pRecentFileList != NULL);

	ASSERT(nID >= ID_FILE_MRU_FILE1);
	ASSERT(nID < ID_FILE_MRU_FILE1 + (UINT)m_pRecentFileList->GetSize());
	int nIndex = nID - ID_FILE_MRU_FILE1;
	ASSERT((*m_pRecentFileList)[nIndex].GetLength() != 0);

	TRACE2("MRU: open file (%d) '%s'.\n", (nIndex) + 1,
			(LPCTSTR)(*m_pRecentFileList)[nIndex]);

        if ( bNotAllowedToOpenFiles )   // added these 3 lines NF
                 InformUser();
        else
	if (OpenDocumentFile((*m_pRecentFileList)[nIndex]) == NULL)
		m_pRecentFileList->Remove(nIndex);

	return TRUE;
}

This also shows m_pRecentFileList is where the list is stored.

Neville Franks, Author of ED for Windows. Free Trial at www.getsoft.com

Re: Disable MRU (Most Recently Used) Problem

LittleYellowBird3-Aug-03 23:41

LittleYellowBird

3-Aug-03 23:41

Sorry for the delay in responding, I've been away for the weekend. Thanks for the help, I'll have a look at your BOOL CWinApp::OnOpenRecentFile(UINT nID) function now.

Much appreciated Smile | :)

,

Ali

Re: Disable MRU (Most Recently Used) Problem

Vitali Halershtein1-Aug-03 2:23

Vitali Halershtein

1-Aug-03 2:23

Hi,

just try default (inherited) method
Cool | :cool:

Re: Disable MRU (Most Recently Used) Problem

LittleYellowBird1-Aug-03 2:52

LittleYellowBird

1-Aug-03 2:52

Talik wrote:
just try default (inherited) method

Sorry, I'm not sure what you mean? Can you add any more?

Cheers,

Ali

Debugging Multithread will Lockup my computer

Mathias S.1-Aug-03 0:26

Mathias S.

1-Aug-03 0:26

I have a really strange problem with VC 6.0.

At a place in my program I start 2 new threads ( GUI and Worker ) and if I put a break points in the worker thread and then when the program comes to the break point and should break, Everything locks up for 20-60sec.
VC totally freezes and all other applications on my machines is also effected
(Can’t close them, no redraw. But if IE is showing an animated GIF this is still running, and mouse pointer is working so it’s not a total lockup and task manager is NOT showing any process running at 99-100%)

This lockup ONLY happens when I debug in my worker thread.
If I don’t put any break points in that thread everything works as it should.

And it’s really annoying. And I tried removing the ncb/opt files, reinstalled VC , close everything else running But nothing helps. If anyone have and idea of what it might be please tell be before I’m going nuts and throws the computer out the window.

I’m running VC 6.0 SP5 on Windows XP SP1 .

Re: Debugging Multithread will Lockup my computer

Neville Franks1-Aug-03 1:17

Neville Franks

1-Aug-03 1:17

I see a problem like this from time to time, where VC++ appears to hang when a breakpoint is reached in my multithreaded app. The only workaround that I've found that sometimes works is Ctr+Alt+Del to bring up Task Manager, which wakes VC up again.

Neville Franks, Author of ED for Windows. Free Trial at www.getsoft.com

Dump Files

ita_cas1-Aug-03 0:18

ita_cas

1-Aug-03 0:18

Hi ,
Does anybody know how to read a dump file ?
I mean that I would like to know the functions names not thier address ?
Is it possible?

Do I need another program to do this ?

Thanks

Re: Dump Files

Mike Dimmick1-Aug-03 2:33

Mike Dimmick

1-Aug-03 2:33

You can read dump files with Visual Studio.NET or with WinDbg (from the Microsoft Debugging Tools[^]).

You'll need the debugging symbols for your application, for the system, and for any third-party DLLs you're using, to get the best out of a dump file.

Signal Processing of a wav. file in real time

björka31-Jul-03 23:49

björka

31-Jul-03 23:49

Hi,

I want to play a wav. file and at the same time stream the samplple values (raw data) in real time into a vector or something in order to do signal processing on the samples.
I guess that the sound file contains some control bits (for instance sample frequency, rate, etc.), but I´m only intested in the actual sound data.

Right now I´m using PlaySound() to play the wav. file, but I cant manage to extract the actual sample values...

Thanks in advance!

Re: Signal Processing of a wav. file in real time

Alexander ^M.,1-Aug-03 2:16

Alexander ^M.,

1-Aug-03 2:16

lol, this is very easy!
read the sample rate and the bits per sample out of the wav file, then read a block, perform DSP action on the samples, copy it into a sound buffer, start playing, and continue with the next block!

Don't try it, just do it! Wink | ;-)

Re: Signal Processing of a wav. file in real time

björka1-Aug-03 3:07

björka

1-Aug-03 3:07

Thanks for the help, but it doesn´t quite solve my problem.

The thing is that the wav-file really is a simulation of a real time situation of someone who speaks in a microphone. Therefore I dont have access to the whole file, i.e. I´m not suppoed to know what comes next. Therefore, it would be better if the sound (or the sample values), while it is playing, is streamed into a buffer which length increases during the file.

Do you know how to do this?

Thanks a lot!

Re: Signal Processing of a wav. file in real time

Alexander ^M.,1-Aug-03 8:55

Alexander ^M.,

1-Aug-03 8:55

capture an incoming packet, perform volume scan on it, and write it to a playing sound buffer!
it's like streaming with a very small buffer!

Don't try it, just do it! Wink | ;-)

CTreeCtrl

Marissa18231-Jul-03 23:36

Marissa182

31-Jul-03 23:36

Hi i was wondering if there was a way like with a list box to add an ItemDataPtr i look at the functions its got and it doesnt have this as a member function is there another way that it can be done? i have a situation where i am using lots of different classes and need to be able to retrieve them through the tree

Re: CTreeCtrl

Ryan Binns31-Jul-03 23:45

Ryan Binns

31-Jul-03 23:45

You can use SetItemData(). Just cast the pointer to a DWORD and it will work fine, unless you're compiling for 64-bit Windows (which you probably aren't Smile | :)

)

Ryan

"Punctuality is only a virtue for those who aren't smart enough to think of good excuses for being late" John Nichol "Point Of Impact"

Re: CTreeCtrl

Vitali Halershtein1-Aug-03 0:08

Vitali Halershtein

1-Aug-03 0:08

You can use SetItemData() to setup poiters to the objects,
or indexes in polymorphyc collection that contained these
classes.
Smile | :)

Vitali

Display text on desktop

Bartosz Bien31-Jul-03 23:02

Bartosz Bien

31-Jul-03 23:02

I would like my NT service to transparently display dynamic text on the desktop. Preferrably with GDI+, Windows XP. Any cool ideas? Roll eyes | :rolleyes:

Regards,
BB

Re: Display text on desktop

HPSI1-Aug-03 1:37

HPSI

1-Aug-03 1:37

Method 1: Enable Active Desktop and set the Windows background to an HTML file.

Method 2: Write text to a bitmap and set that bitmap to be the desktop background.

HPS HwndSpy - GUI developer's aid to visually
locate and inspect windows. For the month of August
only, use coupon code CP-81239 for 30% off.

Re: Display text on desktop

andyj1151-Aug-03 3:57

andyj115

1-Aug-03 3:57

Create a Window and modify it's region with the written text.
Here you can find a great sample of a trasparent application:

http://www.codeproject.com/miscctrl/transclock1.asp

It's the same tecnique that somebody uses to make skin dialog/windows. So you can look at other sample too.

To simulate it on the desktop, you can change the Z-Order with the SetWindowPos, so all the other windows will be above it.

Cool | :cool:

Re: Display text on desktop

andyj1151-Aug-03 4:34

andyj115

1-Aug-03 4:34

Sorry, I didn't read that your was an NT service...

In that case, to keep my idea, you need a small "client" app that dialogs with the service...

Suspicious | :suss:

Re: Display text on desktop

Bartosz Bien1-Aug-03 5:07

Bartosz Bien

1-Aug-03 5:07

This technique seems to suit me! Thank you very much. Cool | :cool:

Regards,
BB

SHGetFileInfo

alex.barylski31-Jul-03 23:01

alex.barylski

31-Jul-03 23:01

SHFILEINFO shInfo; 								  
m_imgList.Detach();
m_imgList.Attach((HIMAGELIST)SHGetFileInfo("C:\\", 0, &shInfo, sizeof(SHFILEINFO), SHGFI_SYSICONINDEX | SHGFI_SMALLICON)); 
	
m_imgList.SetBkColor(ILD_TRANSPARENT);
SetImageList(&m_imgList, LVSIL_SMALL);

What the hell is wrong with the above code???

It's weird, cuz when I index image 0-5 they appear...but nothing beyond that??? Mad | :mad:

I'm drinking triples, seeing double and acting single Cool | :cool:

Speaker & Mic activity meter

bilal7831-Jul-03 22:33

bilal78

31-Jul-03 22:33

Hi All!
How can i get the activity on speaker/mic so that i can build the activity meter within my aplication. My application allows voice conversation between two parties. I want to display speaker & mic activity meter on my application. Any sample or piece of code will be highly appreciated.
Thanks a lot
Bilal Anjum

Re: Speaker & Mic activity meter

Alexander ^M.,1-Aug-03 2:20

Alexander ^M.,

1-Aug-03 2:20

read a raw sound block coming from the mic(they have to be quite small), then initialize 2 variables called "iMin" and "iMax"(both initialized with the null sample values), setup a loop for every sample, and then check if the sample is bigger then iMax or lower than iMin and correct the variable then.
after the block, you know, that the average volume is!
show a scale from 0 till sizeof(bytespersample) and show ( iMax - iMin ) there.

Don't try it, just do it! Wink | ;-)

Re: Speaker & Mic activity meter

bilal783-Aug-03 19:02

bilal78

3-Aug-03 19:02

Hi!
Thnaks for the solution, but i am just a newbie and have no idea where and how to read mic/speaker buffer? If you can tell me some APIs or any example coz i have no idea of sound APIs and data structure, that will be really helpful.

Regards
Bilal Anjum

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.