|
Relocation (remapping) is done transparently by the disk firmware. When a sector is detected as bad, all it's data are transferred to a special reserve area called sparse area and all further read/write attempts are redirected to it. See this wikipedia article.[^]
Sparse areas are not accessible using any standard disk access methods as all LBA addressing to it automatically redirected. (But, it is possible that there may be some vendor-specific commands to do that)
*TIP: You can use ATA Secure Erase[^] command to perform a firmware level erase of disk sectors. The GNU Shred utility is a noteworthy program using this command.
Beauty cannot be defined by abscissas and ordinates; neither are circles and ellipses created by their geometrical formulas.
Source
|
|
|
|
|
Thanks a lot. Been a SunTzu fan I also like Clausewitz very much!
VII. 36. When you surround an army, leave an outlet free. Do not press a desperate foe too hard.
SUN-TZU - Art of War
|
|
|
|
|
In a project, I use the CMainFrame* pMainFrame = new CMainFrame() to create a main frame.
When the function CMainFrame::OnNcDestroy is called, void CView::PostNcDestroy()
will be called. I donot know why CView::PostNcDestroy() will be called, in the function CFrameWnd::OnCreateClient()
no new CView is created. Is there anyone know why? Thanks. 
|
|
|
|
|
Use your debugger. As a first step I would put a breakpoint into CView::PostNcDestroy() and check out the callstack. There you will see who calls it and if you are lucky you can track back the reason. As a second try I would keep track of the creation of every CView and then find out which one is getting deleted.
|
|
|
|
|
|
Thinking about the fork-exec model used common in Unixes. Windows doesn't have a fork() but has all exec() counterparts. So, how does windows behave in this case? Is it similar to unix (shared ds, open fd's etc.) or in a different way?
Ans: Exec is complete alien in windows. It spawns a new process.
Tried googling but answers came mostly about unixes
Beauty cannot be defined by abscissas and ordinates; neither are circles and ellipses created by their geometrical formulas.
Source
|
|
|
|
|
|
Richard MacCutchan wrote: In windows you create processes and/or threads[^].
I'm afraid, that's not what I asked. Being a windows developer I'm aware of the model used in windows.
Ok, then let me put my case here: I have a small unix app (written many many days ago) and now, I want to run it on windows. It has a certain case when it executes another executable with an exec() family call. This replaces the entire process with the child process, including the PID. Is this possible with the exec() family under windows?
Beauty cannot be defined by abscissas and ordinates; neither are circles and ellipses created by their geometrical formulas.
Source
|
|
|
|
|
|
Before posting this message I also went through that page, but couldn't make anything out of it, because of my .NET background.
Only thing that caught my eyes was this:
A program executed with one of the _exec functions is always loaded into memory as if the maximum allocation field in the program's .exe file header were set to the default value of 0xFFFFH.
Can you explain what it does? Creates a new, detached porcess or replaces it just like unix.
Beauty cannot be defined by abscissas and ordinates; neither are circles and ellipses created by their geometrical formulas.
Source
|
|
|
|
|
First sentence: Each function in this family loads and executes a new process.
You can use this either to launch an independent process that will run to completion with no interaction from the original, or you can connect to its stdin/out files for communication, or just wait for it to complete and check status. I think you can use the System.Diagnostics.Process[^] class in .NET in a similar manner.
Use the best guess
|
|
|
|
|
Thank you.
Beauty cannot be defined by abscissas and ordinates; neither are circles and ellipses created by their geometrical formulas.
Source
|
|
|
|
|
Unix like fork is quite foreign in windows. Cygwin simulates fork on windows: http://stackoverflow.com/questions/985281/what-is-the-closest-thing-windows-has-to-fork[^]
There are many "unix simulation libraries" available on windows (including cygwin, interix, ...) but I wouldn't recommend building on top of these if you don't have to. My opinion about the cygwin fork simulation: In the unix world many tools/scripts make use of spawining other processes and processing data by piping the output of one process to another process. Running the same script/program "network" on windows/cygwin is multiple times slower than running the same command on linux if it involves a lot of fork invocations (for example a simple ./configure and ./make combination is always much faster on linux).
|
|
|
|
|
It is similar and different.
|
|
|
|
|
Using VS2008 Professional (v 9.02) in Debug mode on Windows 8 to write a Win32 program I have two versions of Windows Common Controls ComCtl32.dll loading. On a call to: CreateDialogParam one: Product Version 6.2.92.../File Version 5.82.92... loads then on a call to SetupDiGetClassImageList another one loads having Product Version 6.2.92.../File Version 6.10.92.
I only noticed when having problems trying to use a feature of ListView header (up/down sort arrows) that various Googled sources attribute to needing a later version of ComCtl32.dll.
I had a look at the Manifest but see nothing seems relevant there. Switching to Release mode had no effect.
Is it possible to just load one version, preferably the later version loading?
The above with slightly more detail from the VS Output window is below for reference if needed.
In Debug mode:
Between:
hSelectDlg = CreateDialogParam(hInst, MAKEINTRESOURCE(IDD_DIALOG_SELECT), 0, DialogProc, 0);
and entering
BOOL CALLBACK DialogProc (HWND hwnd, UINT message, WPARAM wParam, LPARAM lParam)
Loaded 'C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.9200.16384_none_bf100cd445f4d954\comctl32.dll'
then on a call:
BOOL b = SetupDiGetClassImageList(&m_spImageData);
Loaded 'C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.9200.16579_none_8937eec6860750f5\comctl32.dll'
|
|
|
|
|
Hi,
Have you tried adding a /MANIFESTDEPENDENCY entry for common controls specifying version six and above? Follow the instructions here:
Enabling Visual Styles[^]
Best Wishes,
-David Delaune
|
|
|
|
|
David,
No I hadn't tried anything in the manifest. I've had a quick scan of the link you set and (initially)took the quick option of pasting in the example #pragma just as it's given for a version version= '6.0.0.0' to set the version from a .h file. No obvious difference yet as its still loading a v5 and a v6.
Of relevancet, I have a WTL/ATL version that I can step through side by side with the Win32 version and the WTL/ATL only loads one ComCtl32.dll, the v6.
I'll have a look in more detail later.
Thanks
... controls_6595b64144ccf1df_5.82.9200.16384_none_bf100cd445f4d954\comctl32.dll
...
... controls_6595b64144ccf1df_6.0.9200.16579_none_8937eec6860750f5\comctl32.dll
|
|
|
|
|
Adding manifest as recommended prevents v5 ComCtl32.dll loading, just the v6 but as soon as I open the my dialog with my ListView control on it's gone. Just flickers on the screen and disappears. Calling
InitCtrls.dwICC = ICC_LISTVIEW_CLASSES;
BOOL bInit = InitCommonControlsEx(&InitCtrls);
or not doesn't affect it.Stripped out a most of the functionality but it still happens ...
|
|
|
|
|
The dialog with listbox using one ComCtl32 6 and not loading a v5 at well that flicked out of existence didn't bode too well for debug success so I started from scratch putting in a manifest line at the beginning and it displays. Only one ComCtl32 6.0.9200.16579 is loaded so that looks like success (apart from having to cut'n past stuff stuff).
Thanks
|
|
|
|
|
Hi,
I am wondering what might be the advantage of CStringArray over CArray<CString, LPCTSTR>. The background is that I am planning to implement a CStringArray-like template class which is either explicitly ANSI or explicitly Unicode, and would like to implement it as CArray<CStringA, LPCSTR> and CArray<CStringW, LPCWSTR>, respectively.
Thank you for any comments.
Hans
|
|
|
|
|
I have never mastered the usage of MFC container classes but I have an advice: support only unicode unless you are forced to support ansi. WinNT uses unicode/UTF16 inside, the codepaging/ansi api is just heritage from older windows versions. Supporting both is just a waste of time and unecessary complication if you don't have to support Win9x.
EDIT: Regarding the difference between CStringArray and CArray<CString...> I have a tip: The old versions of MFC didn't contain any templated containers, those mfc versions had only some non-template containers for a few types and CStringArray was one of them (among the others like CByteArray). I guess CStringArray exists just because of backward compatibility. CString didn't have reference counting in some older versions of MFC so in theory it is possible for a specialized CStringArray to reallocate the array memory without copying strings if CStringArray knows the internal implementation of CString, but a templated CArray has to work with copying/deleting. With reference counting a general CArray can do a relatively good job and with today's move ctors it can be even better if MFC supports it.
|
|
|
|
|
There are situations when I must support ANSI, for example when it comes to dealing with ANSI text files or serial protocols. I want to have the CStringArray functionality available for the must-be-ANSI situations while generally compiling for Unicode. Btw, I find MFC containers quite useful (unless, of course, you are using STL). The documentation is quite good, and you can debug-step through the source code.
|
|
|
|
|
Do you receive single bytes/ascii or really ansi on the serial port? Many people confuse ansi with ascii or latin1. Similarly, many windows coders confuse utf16 with unicode (they are two different things) and wchar_t with a unicode character. Can you clearly separate these concepts because if not I can write you a very little mini tutorial about these here. I want to convince you that compiling your program only for unicode is probably enough. Btw, what is on the other end of the serial port and what kind of codepage do you use in the "ansi" text for communication, is the text bare ascii (characters below chr(128))?
Containers: No matter what containers you use, its easy to debug either implementation. One of the project I'm currently working on contains own container implementations (array, hashmap, ...) and even these containers are debuggable if you can adjust the autoexp.dat file of your visual studio accordingly to teach the debugger how to get out items from the container. When I choose containers I consider 2 aspects: portability to different platforms and whether I need hardcore performance optimization later in the project or not. If we consider portability then stl is a much better choice than mfc containers, thats why I never really used mfc containers. Writing your own containers isn't practical in 99% of the projects.
|
|
|
|
|
Well in fact I should use proper terminology. When I said "ANSI" I meant 8-bit character stuff. When I said "Unicode" I meant 16-bit characters. Speaking of Unicode code points, mostly in the range 0000 through 007f. In other words, ASCII characters in different representations. But this discussion is getting beside the point. My question was, what is the advantage of CStringArray over CArray<CString, LPCTSTR>? Rephrase: Why is there a CStringArray class when CArray<CString, LPCTSTR> has the same functionality? Or does it not?
|
|
|
|
|
Here is a nice page that can help you in choosing between the two options: http://msdn.microsoft.com/en-us/library/y1z022s1%28v=vs.71%29.aspx[^]. In my previous post I mentioned that in the early days of MFC there were no template usage in the mfc library so they created several array implementation for some basic types like WORD, CString, Int,... Later they introduced templated classes like CArray<> but they kept the earlier container classes as well for backward compatibility so as to keep old legacy code compilable. Today you can use either of them but probably the CArray<cstring> is preferred in new code.
I would compile only a single unicode-aware version from my program and I would convert my strings to ascii only before sending them over serial connection and converting them back after receiving the string from serial but of course this is your choice. If you used utf-8 to represent strings then the conversion would be unnecessary - with utf8 you should convert between utf8 and utf16 only when you call winapi that has string parameters and/or return values. I like using utf-8 internally because its compatible with ascii, unicode aware, and its very easy to port to unix like systems at the same time.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
