|
Thanks.
I'm unaware of specific limitations to observe or -in general- 'good conducts' to keep while inside DllMain().
I'll trust your input, and seek documentation about it later. As for the immediate...
... since the main process' thread is kept suspended and I alone decide when to let it run...
... would it be safe to CreateThread() from inside DllMain() and move all my code in there?
Or is CreateThread() another bad practice when in the context of DllMain()?
If you know better alternatives I'll listen.
Thank you again for the help.
|
|
|
|
|
|
*reading*
Hmm. Looks like that, to program today, one has to have the knack of the lawyer as well. Can't do this, Don't do that, But this is okay if, Unless, Just watch for, ...
 Jokes aside, now.
It would appear that pretty much anything coming not from kernel32 is not to be invoked from anywhere/anystage_of DllMain().
And even so, some kernel functions directly/indirectly cause the loading of more libraries... which is another taboo.
Fine.
I'm developing for WinXP 32bit. That's the oldest platform I target.
In my case my best option is to resort to the APC mechanism. For example the SetWaitableTimer() (exported by kernel32.dll) can be safely called from DllMain(), and *it* can invoke an APC function on completion (completion which can occur 1) immediately, and 2) autonomously - no need for external inputs).
It's perfect.
Once inside the APC function -> I can do anything I want.
I should be on the right track this time 
But I'll try this out tomorrow. Must sleep now.
Thank you very much for the informative links  (vote: 4)
Feel free to add anything else you think might help.
A good night to you.
|
|
|
|
|
I'm glad you found it useful. Good luck with your implementation.
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
|
Dear All,
I am practicing about creating login Dialog as below:
void Login::OnBnClickedOk()
{
if (m_username == "test" && m_password == "test123"")
{
AfxMessageBox("You login successfully!");
UpdateData(true);
CWnd*pWnd;
pWnd = GetDlgItem(IDC_USER);
pWnd->SetFocus();
return;
}
AfxMessageBox("You login incorrectly!");
UpdateData(false);
}
Please help me write "BOOL Login::OnInitDialog()" function!( because I want to call this login dialog)
Thanks!
|
|
|
|
|
Huh ?
Well, your Login dialog should/could be called in the OnInitDialog of the "other" dialog (which I assume is the one that needs to have permission), the one that will call the Login dialog.
If you have the "other" dialog :
// use the OnInitDialog that will be automatically generated.
BOOL COtherDialog::OnInitDialog()
{
BOOL result = CDialog::OnInitDialog();
Login loginDialog;
if ( loginDialog.DoModal() == IDOK )
{
}
else
{
}
return result;
}
Watched code never compiles.
|
|
|
|
|
|
In this context, calling UpdateData() is not serving any useful purpose.
Le Quang Long wrote: Please help me write "BOOL Login::OnInitDialog()" function!
It should have been done for you automatically. If not, right-click the Login class and select Properties. In the Properties window, click the Overrides button. Do you see OnInitDialog in the list?
"One man's wage rise is another man's price increase." - Harold Wilson
"Fireproof doesn't mean the fire will never come. It means when the fire comes that you will be able to withstand it." - Michael Simmons
"Show me a community that obeys the Ten Commandments and I'll show you a less crowded prison system." - Anonymous
|
|
|
|
|
|
Hi Experts,
How can I restrict copy and paste (from mouse and keyboard) from a view?
|
|
|
|
|
1. Capture the Key Down/Mouse click event
2. Find if it's a Copy(Ctrl+C) action
3. return from the Key down handler if it's a Ctrl+C
It would be good if you can elaborate on what is in that view
You talk about Being HUMAN. I have it in my name
AnsHUMAN
|
|
|
|
|
The question is: what view? Is it MFC Cedit or CrichEdit derived view?
Anyway, you do not have capture anything. Where is the word capture coming from? Windows sends messages that you choose to handle or not you do not have to set any traps to capture.
Anyway, if this is MFC application it has menu items and possibly corresponding accelerator keys combination with the same ID.
For example: ID_EDIT_PASTE has Ctrl-V or CTRL-Insert key combinations.
If you want to completely disable copying pasting, insert do nothing (empty) handlers for those IDs, leave accelerators intact and remove appropriate menu items.
If you want to disable editing under certain condition, use Update UI for those commands.
JohnCz
|
|
|
|
|
By the artical:
http://msdn.microsoft.com/en-us/library/9yb4317s(v=vs.80).aspx[^]
After create a new platform of x64, I can create a new solution configuration for Debug Win64 and copy settings from Debug Win32. But I wonder how to set the properties for the x64 solution. After I create new solution configuration and copy settting from Win32, I found the macro WIN32 is still there, but not replaced by WIN64.
For win64 application, which macro(s) should I set in the /D setting? Should I keep the /DWIN32?
Btw, I found the _WIN32,_WIN64 macro in MFC source code, but not WIN32,WIN64. Which one is required in the /D setting?
Thanks for your inputs.
/Sam
|
|
|
|
|
I think you have't fully understood that article.
When you are copying win32 settings to x64, that article clearly mentioned to change win32 switch to win64 for /D switch
Quote: Values of WIN32 are replaced by WIN64 for /D (Preprocessor Definitions).
Quote: I found the _WIN32,_WIN64 macro in MFC source code
Which source code? your code or in any of the standard headers?
If it is yours, then you should take care to propely to map these settings to win32 and win64 pre-processor definitions
|
|
|
|
|
Some marcos like WIN32/_WIN32 and WIN64/_WIN64 are used by VC++. I am not sure what's the difference between WIN32/WIN64 and _WIN32/_WIN64.
Lakamraju Raghuram wrote: I think you have't fully understood that article.
When you are copying win32 settings to x64, that article clearly mentioned to change win32 switch to win64 for /D switch
Refering to the artical, the WIN32 macro should be repalced by WIN64 with /D switch support. But after I did it under the steps, the WIN32 macro still there but not replaced by WIN64. You may try it from your side. So I am confused by the result.I wonder if it is a defect of vs2008 IDE. Some other articals mentioned that the WIN32 macro always should be set with /D switch and with WIN64 macro definied for x64 application perspectively.
Lakamraju Raghuram wrote: Which source code? your code or in any of the standard headers?
If it is yours, then you should take care to propely to map these settings to win32 and win64 pre-processor definitions
I found the _WIN64 macro in MFC header file of basestd.h. Here a code snap:
#if defined(_WIN64)
typedef __int64 INT_PTR, *PINT_PTR;
typedef unsigned __int64 UINT_PTR, *PUINT_PTR;
typedef __int64 LONG_PTR, *PLONG_PTR;
typedef unsigned __int64 ULONG_PTR, *PULONG_PTR;
#define __int3264 __int64
#else
typedef _W64 int INT_PTR, *PINT_PTR;
typedef _W64 unsigned int UINT_PTR, *PUINT_PTR;
typedef _W64 long LONG_PTR, *PLONG_PTR;
typedef _W64 unsigned long ULONG_PTR, *PULONG_PTR;
#define __int3264 __int32
#endif
So I am not sure which macro I should set in the preprocessor definition setting. By default, VS2008 IDE set the WIN32 macro with /D switch. Also I found _WIN32 macro is used in the MFC header files and source files.
modified 30-Apr-12 7:27am.
|
|
|
|
|
SAMZCN wrote: So I am not sure which macro I should set in the preprocessor definition setting.
My 64 bit projects have _WIN64 defined in the preprocessor definitions. Btw... you are correct... when you copied the project settings it should have been automatically updated by Visual Studio.
Best Wishes,
-David Delaune
|
|
|
|
|
hello hello hello
simply i have this code . and i need help to modify or change >= operators in class .
#include <iostream>
using namespace std ;
class time
{
private :
int hour ;
int minute ;
int second ;
public :
time ()
{}
time (int h , int m , int s ) : hour ( h) , minute (m) , second(s)
{}
void get ()
{
cin >> hour >> minute >> second ;
}
void show ()
{
cout << hour << " : " << minute << " : " << second << endl ;
}
bool operator >= ( time r )
{
if ( hour >= r.hour )
{
if ( hour > r.hour )
{
return true ;
}
else
{
if ( minute >= r.minute )
{
if ( second >= r.second )
return true ;
else
return false ;
} else {
return false ;
}
}
}
else
return false ;
}
};
int main ()
{
time a, b ;
a.get() ;
b.get() ;
a.show() ;
b.show () ;
if ( a >= b )
cout << "true \n" ;
else
cout << "not true \n" ;
return 0 ;
}
|
|
|
|
|
|
Hi,
I need to retrive a list from IP server.
Do you know how to do it by AsyncIO?
Even good referance will be great...
Thanks! 
modified 29-Apr-12 9:07am.
|
|
|
|
|
Run, don't walk, to the Boost website (http://www.boost.org/)and grab yourself a copy of the complete libraries. Start compiling it and while you're waiting start looking at the documentation for the asio library - http://www.boost.org/doc/libs/1_46_1/doc/html/boost_asio.html.
Another option would be to go and have a look at ACE (http://www.cs.wustl.edu/~schmidt/ACE.html). It's a bit older code base with a clunkier interface but still worth a look.
Both of them do the job of asynchronous network I/O really well. I found the Boost library easier to use but then I've been programming C++ for a while now. I imagine if you were less experienced then ACE might be the better option as the interface is older from the time before C++ was so well understood and standardised.
Good luck!
Ash
|
|
|
|
|
Dear all everyone,
My project compiled out "exe file" but I want protect this exe file when click it(password requestion).Please help me! I created this project by DIALOG(MFC)in environment of visual studio 2005.
Thanks and Best regards,
LQLONG
|
|
|
|
|
If I'm not missing something, you just write code to ask for password.
"Real men drive manual transmission" - Rajesh.
|
|
|
|
|
|
I help you with what exactly? Read point #2 in this post: How to ask a question[^]
"Real men drive manual transmission" - Rajesh.
|
|
|
|
|
Dear Mr. Chris Maunder,
Thanks and Good health,
LQL
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
