|
SandipG wrote: Do you know any?
Unfortunately, no. 
SandipG wrote: If not i think George can write one side by side as he implements Dual Interface
Oh, he's writing the George's COM Bible!
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler.
-- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong.
-- Iain Clarke
[My articles]
modified on Friday, September 12, 2008 5:39 AM
|
|
|
|
|
Thanks CPallini,
I have one more comment, at first I agree with what you mean above. I think there is another way to implement dual interface, which is we need implement both an additional customized interface (and the customized interface inherits from IUnknown) and also implement IDispatch (in IDispatch's Invoke implementation we can call the methods from the customized interface methods' implementation)? Is that also dual interface?
regards,
George
|
|
|
|
|
I think the standard way is just inheriting from IDispatch (since IDispatch in turn inherits from IUnknown) this way does not prevent IDispatch::Invoke to call the methods of the customized interface.
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler.
-- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong.
-- Iain Clarke
[My articles]
|
|
|
|
|
I agree, but my implementation above is wrong and not dual interface, CPallini?
regards,
George
|
|
|
|
|
Well, it depends on how do you implement the IDispatch interface (for instance, if your customized interface inherits both from IUnknown and IDispatch the you've a undesirable diamond inehritance path).
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler.
-- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong.
-- Iain Clarke
[My articles]
|
|
|
|
|
Thanks CPallini,
I agree the solution you mentioned -- making my component implement a customized interface, and making the IDispatch interface should be the optimum solution.
regards,
George
|
|
|
|
|
 Actually, "dual interface" refers to a COM class's ability to have its methods bound at compile time OR at run-time.
Generally, all COM classes implement "custom" interfaces - after all, they do things that are specific to defined set of requirements, and are thus "custom".
The COM class's methods are bound at compile time into a virtual function table, or VTABLE. For a program (client) to invoke the COM class's methods, it must have "knowledge" of the methods exported by the COM component at the time the client program itself is compiled into executable form. For applications where the COM object (server) and the client program are designed and built together, the client can easily have such "knowledge". I often develop COM servers and clients simultaneously, and my client programs have "intimate" knowledge of the names of the methods exported by the COM server.
But what about client programs that want to use a COM server's methods at RUN TIME, but do not necessarily know the names and other properties of the methods exported by the COM server? This situation arises very often for scripting languages where the executable code is built "on the fly".
The process whereby a client program "discovers" and uses the methods exported by a COM server is called "Run-time" binding, also known as "late" binding. This process allows scripting languages to identify what interfaces (methods) a COM class supports at run time, long AFTER the COM class has been compiled into executable code. This is done through QueryInterface and the IDispatch method. Thus, a COM class must support the IDispatch interface if it wants to allow client programs to bind to its methods at run-time.
A COM class that supports IDispatch is thus said to be "dual interface" - a client program with "intimate" knowledge of its method's names and parameters can bind to it a compile time, OR the client can bind to its methods at run time via QueryInterface and IDispatch.
Incidentally, "IDispatch" is aptly named because it is a method that "dispatches" a function call to the proper method within the COM server.
|
|
|
|
|
Thanks Scott,
I like your long and comprehensive post. Two more comments,
1.
To implement dual interface is easy, i.e. making the component implement a customized interface, and making the customized interface inherits IDispatch. So, I think since it is easy, every COM component should implement it and be a dual interface. Why implementing dual interface is not mandatory -- i.e. for some other reasons, developer will not implement dual interface?
2.
For the compile time binding as you mentioned -- just clarify one point, I think COM consumer should not create and component and call its implementation method directly (call the component other than call the interface) -- but should use QueryInterface to get the interface which the COM component implements, then call the methods (using vtable) through the interface. Correct?
regards,
George
|
|
|
|
|
On point 1: I rarely implement dual interfaces because I develop COM servers and COM clients as part of a package application, and my client components always have "up front" knowledge of what the server can do. So, I typically do not implement the IDispatch interface. This results in a little less complexity in my application and improved performance.
My belief is that you should only implement IDispatch if a) you are developing a COM component that you are going to make publicly available to other developers so that they might use it in their applications, or b) your COM component needs to be used by a scripting language, for example VBScript within a web page, in which case you must implement IDispatch so that the VBScript can bind to your COM component at run time (late binding).
The application that I support is all written in C++ (no scripting languages) and contains no components that are intended to be available for use by other developers outside my company.
On point 2: You are correct, the client should always call "QueryInterface" to get a pointer to the desired interface exported by a server, then call the methods of that interface via the pointer. Since the methods of the interface are all defined as virtual functions in C++, you are implicitly invoking the methods through the virtual function table. (Of course, virtual functions are intrinsic to the C++ language and existed long before COM was created.)
|
|
|
|
|
Thanks Scott,
1.
Why "you are developing a COM component that you are going to make publicly available to other developers" as you mentioned, I must expose IDisaptch? I could expose vtable only and let them use C++.
Any comments or any important points which I missed in my above statements?
2.
I further question. If we want to support IDispatch, all types in methods' parameter/return value must be auomtation compatible? If yes, why?
regards,
George
|
|
|
|
|
Yes, on point number 1...You ONLY have to support IDispatch if you want scripting languages or other languages that use late binding to be able to use to your COM server component. Of course, this is very often the case these days with so many COM components being written to plug into web sites and be called from VB script, Java script, etc. I'm sorry I should have made this more clear. So, you CAN have a COM component publicly available that does NOT support IDispatch, but it will need to be linked with the client program at compile (build) time.
On point 2: YES, all parameter/return values MUST be automation compatible. Basically, this means that everything must be VARIANT, BSTR, long integer, etc. Why? Because COM is a defined standard that all programming languages that wish to be COM compliant must adhere to if they wish to interface with each other, and IDispatch is a defined interface within the standard. If you wish to use much of the automation linkage already put into place by Microsoft, and the COM subsystem (also implemented by Microsoft via Windows), you'll have to adhere to the standards of the subsystem components. For example, of you try to pass a "C-style" string from a C++ program to a VB program through a COM interface, the VB program will probably crash because it doesn't "understand" the structure of a C-style string.
Incidentally, I had to read two or three books on COM and diligently work the examples before I got it figured out. I tried using ATL and the Visual Studio wizards to create my COM components, but quickly gave up on this because it was very inflexible when I wanted to make additions or changes to my COM classes. I ended up hand-building, from scratch, all of my COM components, but now I have a library of components for use in my applications.
Scott
|
|
|
|
|
Thanks Scott,
Your answer is really great! Just want to clarify two things.
1.
No matter who (I mean COM consumer) will use IDispatch interface, like C++/VB such advanced client or script client, all the parameter types and return value types we use IDispatch.Invoke to pass in/out should be VARIANT, correct?
2.
My current confusion is, in IDL I have defined some customized data type (some struct) and in some methods I use such customized data type as input parameter or return value. If I want to support IDispatch.Invoke to consume the methods, could I use such customized data type either as input parameter or return value, even for advanced client C++/VB?
regards,
George
|
|
|
|
|
1) Well, not necessarily: for example, automation directly supports BSTR (b-strings) and 4-byte integer values (known as long integers in C++), BUT...to keep things more simple, I would recommend just using VARIANT for all of your parameters, as you suggest. If you study the VARIANT data type closely, you'll see that the VARIANT structure itself actually can hold many other data types. Its up to you to figure out what a VARIANT contains by looking at the '.vt' member of the structure.
Also, if you're writing in VB, VB can automatically convert from VARIANT to other data types for you. I believe C# can do this also, although I haven't really dabbled in C# yet. If you're writing in C++, you can use the _variant_t class which provides many conversion operators (I use _variant_t all the time in my C++ code).
2) I wouldn't necessarily recommend using a custom data type through the IDispatch interface unless your ready to write "custom marshalling" routines. "Marshaling" is the process of packaging up your function calls and parameters, then passing them across process boundaries, and possibly even across machine boundaries if you are going to have a client on one machine invoke a COM server on another machine (which is another really cool thing to do with COM). Microsoft provides COM components that can performing the marshalling for you based on the information you have in your IDL.
Is there a way you can take your custom data type and make it "look" like a standard type? For example, could your custom data type be type cast as a long integer (vt = VT_I4) and placed into a VARIANT for the function call? And then when the server gets the parameter value, it can type cast it again into whatever you need it to be?
Scott
|
|
|
|
|
Thanks Scott,
I am always confused about two concepts. Automation compatible data type and VARIANT. Are they the same thing -- means if a data type could be represented by VARIANT, it is automation compatible?
I did some study, and find seems VARIANT is not ole automation type? So, I am even confused. It is appreciated if you could clarify the relationship between ole automation data type and VARIANT.
http://msdn.microsoft.com/en-us/library/aa367129%28VS.85%29.aspx[^]
regards,
George
|
|
|
|
|
Yes, the VARIANT data type IS "automation-compatible". In fact, the last time I checked, all parameters to the IDispatch interface HAD to be VARIANT. Thus, your phrase "means if a data type could be represented by VARIANT, it is automation compatible" is TRUE.
I am not sure where you found something that indicates that a VARIANT is not an ole automation data type, but I think what you found is in error.
There are other data types that can be marshalled between a COM client and a COM server, but you must use VARIANT with the IDispatch interface.
Now, in the early days, "automation" was referred to as "OLE automation", where the acronym "OLE" meant "Object Linking and Embedding". This was a phrase that Microsoft used to describe its early techonologies for allowing their Office applications to work with each other. "OLE automation" was the precursor to COM. Later on, the VB team at Microsoft created the IDispatch interface, "OLE automation" bcame the foundation for "ActiveX" controls, people dropped the acronym "OLE" and simply started referring to "OLE automation" as just "automation", and the VB folks defined "automation" as meaning "a COM component that supports the IDispatch interface".
These days, however, "automation" is generally accepted to mean simply "a software component that adheres to the COM specification", even if it does not support IDispatch. (Remember, a COM component does not have to support IDispatch.)
Now, if you have ever programmed in VB, you know that you can use a variable without first declaring it. When you do this, VB automatically creates a variable of type...VARIANT. From the outset, VB is designed to be very flexible with regard to its data types, and because VB was both a compiled language AND a scripted language, the VARIANT data type was very convenient for passing data between software components that were bound at run-time (as with VB script).
So, you can see why VARIANT is so important to the IDispatch interface. The VB folks at Microsoft had a strong influence on COM and the IDispatch interface. They were also very interested in the use of ActiveX controls (COM components) in VB form applications, and web-based applications using VB script.
So, the moral of the story is: VARIANT is an "automation-compatible" data type, and is in fact probably the most commonly used data type for passing data between COM components.
Now, there are other "automation" data types, for example BSTR. You can pass a BSTR between a COM client and a COM server. The "marshalling" code produced by the MIDL compliler handles BSTR values quite nicely. So, VARIANT is not the only "automation" data type, but you could easily use VARIANT for ALL of your parameters if you wanted to.
This is what I do: All parameters passed between my COM clients and my COM servers are either VARIANTs, BSTRs, or long integers (four-byte integer values). Once I get the data inside my COM client or my COM server, I will typecast or convert the data into whatever type or structure I need to maniuplate the data "inside" the client or server code. If/when I need to send the data back to the client/server, I simply convert back to VARIANT, BSTR, or long integer.
Scott
|
|
|
|
|
|
Well, actually, I never said that.
You are absolutely correct - you CAN represent BSTR and long integer in a VARIANT. BUT...you don't have to. You can pass a BSTR (or long integer) between a COM client and a COM server without first putting it into a VARIANT. I think a lot of COM programmers, to keep things simple and consistent, probably just use VARIANTs for everything.
Scott
|
|
|
|
|
I agree, Scott!
One more question, long integer you mean what data type? Could you write the related name in source codes (C++ and IDL) please?
regards,
George
|
|
|
|
|
In C/C++, a long integer is a four-byte integer value. If you study the valid values for the 'vt' member of a VARIANT (type of variant), you'll notice that the values for four-byte integer are 'VT_I4' (signed four-byte integer) and 'VT_UI4' (unsigned four-byte integer). I'm not sure how VB and C# let you set the variant type, but C++ has a '_variant_t' class that wraps VARIANT and has assignment operators that set it for you, or you can simply set it yourself.
In C++, a long integer variable is declared as:
long lMyVariable = 0 ;
In IDL, you use the "long" keyword, as in these examples:
[id(65), helpstring("Load an account from the database for a specific EMS/ambulance run.")]
HRESULT LoadForRun(
[in] long lAmbRunID,
[out] long* plAccountID) ;
[id(43), helpstring("Get the first condition indicator for an EMS/ambulance run.")]
HRESULT GetFirstConditionIndicator(
[out, string] BSTR* pbstrConditionIndicator,
[out] long* plConditionIndicatorID) ;
Notice that the parameters are of type "BSTR" and "long" (the asterisk, of course, means that a given parameter is actually a pointer to a BSTR or a long).
Scott
|
|
|
|
|
Thanks Scott,
What do you want to express by the below statements? C# and VB does not support 4-byte integer or??
--------------------
In C/C++, a long integer is a four-byte integer value. If you study the valid values for the 'vt' member of a VARIANT (type of variant), you'll notice that the values for four-byte integer are 'VT_I4' (signed four-byte integer) and 'VT_UI4' (unsigned four-byte integer). I'm not sure how VB and C# let you set the variant type,
--------------------
regards,
George
|
|
|
|
|
Just think of one more point to clarify -- we always mentioned of the dual interface access methods is -- invoke its methods through vtable. My confusion is what exactly mean "through vtable". I think it means using QueryInterface for customized interface for the coclass object, and invoke the exposed methods in the customized interface is through vtable of coclass object for the customized interface. Correct?
regards,
George
|
|
|
|
|
Yes, it means
(1) get the IUnknown pointer
(2) get the ICustomized pointer via IUnknown->QueryInterface
(3) call ICustomized->WhateverMethod()
(eventually perform cleanup...)
on the other hand, access via IDispatch is quite different.
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler.
-- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong.
-- Iain Clarke
[My articles]
|
|
|
|
|
Thanks CPallini,
Good answered.
regards,
George
|
|
|
|
|
Hi CPallini,
Just through of another question, to implement dual interface is easy, i.e. making the component implement a customized interface, and making the customized interface inherits IDispatch. So, I think since it is easy, every COM component should implement it and be a dual interface. Why implementing dual interface is not mandatory -- i.e. for some other reasons, developer will not implement dual interface?
regards,
George
|
|
|
|
|
George_George wrote: Just through of another question, to implement dual interface is easy, i.e. making the component implement a customized interface, and making the customized interface inherits IDispatch. So, I think since it is easy
Most of COM components implement dual interface.
George_George wrote: So, I think since it is easy, every COM component should implement it and be a dual interface.
(1) Is not that easy if you're doing it hand-crafting (without the help of a wizard or a framework such MFC or ATL)
(2) Keeping COM requirements minimal is (IMHO) a good design approach.
George_George wrote: i.e. for some other reasons, developer will not implement dual interface?
Because, for instance, all the clients (of the COM server they're building) are written in VTABLE
binding language (like C++ or VB6 clients). AS you know VTABLE binding
is more efficient than IDispatch mechanism.
Final note: if you don't need a feature, why doing efforts to implement it?
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler.
-- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong.
-- Iain Clarke
[My articles]
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
