|
I think problem is on the detialy because if you run this code on the a project you can see a button and it response to clicks
|
|
|
|
|
Hi All,
when i call loadXML there is some memory leak.
please give me a solution to avoid memory leak.
|
|
|
|
|
voorugonda prashanth wrote: please give me a solution to avoid memory leak.
delete your pointers, or use smart pointers
|
|
|
|
|
voorugonda prashanth wrote: when i call loadXML there is some memory leak
How you are verifying this ? Can you show code ?
voorugonda prashanth wrote: please give me a solution to avoid memory leak.
Release memory allocated. As already suggested use smart pointers.
Delete memory allocated using new.
|
|
|
|
|
i displayed the filpath in my listview's first item. when I close the application its stored in xml file and when application reopen it will restore the data in the listview again through reading the xml file . when i read the data and dispaly item in the listview it will show me the UNICODE CHAR
e.g. like square box.
how can remove it please help me.
Amit
|
|
|
|
|
amitmistry_petlad wrote: it will show me the UNICODE CHAR
How can you be sure that it reads the characters in unicode ? It can simply be that you display a string that is wrong, perhaps because it failed during the load (or you did it wrong). Did you use your debugger to check if everything was as expected ?
|
|
|
|
|
when i wrote in the file it is like below
<filelist>
- <listitem type="dir" order="0">
<path>C:\Documents and Settings\Amit\Desktop\MediaFiles\</path>
</listitem>
</filelist>
then second time when i reopen and read from the file
.....<path>
C:\Documents and Settings\Amit\Desk
it is ok but then it will give three squarebox.
when i debug it is ok and display normal text but when dispaly in the listview at that time it gives square box in the listview GUI.
what should i do ?
the code is following
<pre>
if(inputtype=="dir")
{
if(tmp.find("order") != -1)
{
size_t pos1 = tmp.find_last_of("=");
string tmporder = tmp.substr(pos1 + 2);
size_t pos2 = tmporder.find_last_of("\"");
string inputorder = tmporder.substr(0,pos2);
int i=atoi(inputorder.c_str());
tok = strtok_s(NULL,"<>",&token);
tmp=tok;
if(tmp.find("path") != -1)
{
tok = strtok_s(NULL,"<>",&token);
string filename=tok;
WCHAR* DIRPATH=util.ConvertStringToWCHAR(filename.c_str());//i have done it both way with string as well as with tok but not successful
LvItem.pszText=(LPWSTR)DIRPATH;
SendMessage(hList,LVM_INSERTITEM,i,(LPARAM)&LvItem);
}
</pre>
-- modified at 22:54 Tuesday 13th February, 2007
|
|
|
|
|
amitmistry_petlad wrote: when i wrote in the file it is like below
<filelist>
<listitem type="dir" order="0"> <path>C:\Documents and Settings\Amit\Desktop\MediaFiles\
You should really use a XML-Parser instead of code it by hand.
Try TinyXML[^] or CMarkup[^]
Are you sure your ConvertStringToWCHAR() is working as expected?
In the Debugger, DIRPATH and filename look the same?
You are setting pszText, but not setting the mask accordingly.
Are you sure LVM_INSERTITEM can cope with unicode? I am not, but I never tried. it.
Wouldn't it be easier to use the CListCtrls member InsertItem()?
"We trained hard, but it seemed that every time we were beginning to form up into teams we would be reorganised. I was to learn later in life that we tend to meet any new situation by reorganising: and a wonderful method it can be for creating the illusion of progress, while producing confusion, inefficiency and demoralisation."
-- Caius Petronius, Roman Consul, 66 A.D.
|
|
|
|
|
jhwurmbach wrote: Are you sure your ConvertStringToWCHAR() is working as expected?
1)yes.ConvertStringToWCHAR() its working
jhwurmbach wrote: In the Debugger, DIRPATH and filename look the same?
2)yes. at the time of debugging i have checked it .both same .
jhwurmbach wrote: You are setting pszText, but not setting the mask accordingly.
is it must?
jhwurmbach wrote: Wouldn't it be easier to use the CListCtrls member InsertItem()?
i will try it out.
but i am using win32 .ok
jhwurmbach wrote: Are you sure LVM_INSERTITEM can cope with unicode? I am not, but I never tried. it.
that i dont know
|
|
|
|
|
amitmistry_petlad wrote: jhwurmbach wrote:
You are setting pszText, but not setting the mask accordingly.
is it must?
Thats how I read the doku.
In mask you set which of the items are to be regarded as valid.
amitmistry_petlad wrote: jhwurmbach wrote:
Wouldn't it be easier to use the CListCtrls member InsertItem()?
i will try it out.
but i am using win32 .ok
Win32. Ok, no MFC functions then.
pszText is of type LPTSTR, that does mean it is char* when UNICODE is not defined and wchar_t* when UNICODE is defined.
That corresponds to your logic?
"We trained hard, but it seemed that every time we were beginning to form up into teams we would be reorganised. I was to learn later in life that we tend to meet any new situation by reorganising: and a wonderful method it can be for creating the illusion of progress, while producing confusion, inefficiency and demoralisation."
-- Caius Petronius, Roman Consul, 66 A.D.
|
|
|
|
|
what should i write instead here?
if(tmp.find("path") != -1)
{
tok = strtok_s(NULL,"<>",&token);
string filename=tok;
WCHAR* DIRPATH=util.ConvertStringToWCHAR(filename.c_str());
<code> LvItem.pszText=(LPWSTR)DIRPATH;</code>
SendMessage(hList,LVM_INSERTITEM,i,(LPARAM)&LvItem);
}
|
|
|
|
|
Are you compiling your project with UNICODE defined?
the std::string filename you use is certainly not Unicode-capable. You would need std::wstring.
Then your function ConvertStringToWCHAR is giving out a pointer. Hwo is owning the memory there? Who does delete it? Are you sure it is valid at the point of SendMessage?
"We trained hard, but it seemed that every time we were beginning to form up into teams we would be reorganised. I was to learn later in life that we tend to meet any new situation by reorganising: and a wonderful method it can be for creating the illusion of progress, while producing confusion, inefficiency and demoralisation."
-- Caius Petronius, Roman Consul, 66 A.D.
|
|
|
|
|
ya i had checked. configuration property->general->Character Set Use Unicode Character Set.
even if i will not use string then also i can use tok.
so it is better to me to use tok.because its char *
2) when i select the path like.
c:\documents and setting\...\desktop
and when close the application it goes the properway in XML.
but when i reopen it the blank space of documents and settings will be deleted and the character has been shifted that place means the blank space is fill by the next char and when it comes at the end desktop,
it will display like desksquaresquaresquare
WCHAR* Utility::ConvertStringToWCHAR(string source)
{
try
{
WCHAR w_Out[MAX_PATH];
MultiByteToWideChar(CP_ACP,MB_PRECOMPOSED,source.c_str(),(int)(source.length() + 1),w_Out,MAX_PATH);
return w_Out;
}
catch(exception ex)
{
throw ex;
}
}
|
|
|
|
|
Your ConvertStringToWCHAR function returns a pointer to a stack-variable:
With the closing bracket of the try-block, w_Out goes out of scope. It is undefined what happens with the memory formerly being w_Out. So the pointer may or may not point to complete rubbish.
And the length-parameter for the int-string is surely source.length(), not lenght()+1 ? Since length() is giving the number of chars in the string.
Please chek the return-value from MultiByteToWideChar(), and output GetLastError when it is 0.
Also, you could try to call MultiByteToWideChar() with the last parameter ccWideChar being 0 , and glean from the return value how many wide chars you need to provide.
"We trained hard, but it seemed that every time we were beginning to form up into teams we would be reorganised. I was to learn later in life that we tend to meet any new situation by reorganising: and a wonderful method it can be for creating the illusion of progress, while producing confusion, inefficiency and demoralisation."
-- Caius Petronius, Roman Consul, 66 A.D.
|
|
|
|
|
please edit your message and put your codes samples withing a <pre></pre> tags block...
|
|
|
|
|
Hi..
I am creating an ActiveX control..and I have to set the Threading Model to both
'afxRegApartmentThreading' and 'afxRegFreeThreading' in the function
'AfxOleRegisterControlClass' in VC++ 6.0
But, the compiler gives an error...."'afxRegFreeThreading' : undeclared identifier"...
I have checked in MSDN...this 'afxRegFreeThreading' is a valid parameter..
Whats wrong here?
...A Programmer may or may not be the master of the programming language grammar...
|
|
|
|
|
Same question with little title 
|
|
|
|
|
you asked this 2 hours ago[^].
you're not on a chat room, so please be patient. and if you don't get answers then, consider revising the question
|
|
|
|
|
Thnx a lot for the beautiful piece of advise...
...A Programmer may or may not be the master of the programming language grammar...
|
|
|
|
|
Have you included afxctl.h?
|
|
|
|
|
Hi,
Yes i have...thats the problem here
'afxctl.h' defines the following constants:
enum AFX_REG_FLAGS
{
afxRegDefault = 0x0000,
afxRegInsertable = 0x0001,
afxRegApartmentThreading = 0x0002,
};
This does not have the freethreading model constant...
If I pass 'afxRegApartmentThreading' as the parameter to the registering function then it works fine...but there's no constant for free threading model..
how can these be missing when MSDN articles say so..?
OR I am missing something here ? Help ...
Also, if the threading model is changed directly in the Registry..it works...n I can do the same using VC++ code...but I want to know where is the free threading model constant
Thanks in advance..
...A Programmer may or may not be the master of the programming language grammar...
|
|
|
|
|
Apparently that was added in a later MFC version, sorry.
It's there in MFC 7.xx ... You're probably on version 4.xx?
Mark
|
|
|
|
|
AbbyIndian wrote: Also, if the threading model is changed directly in the Registry..it works...n I can do the same using VC++ code...but I want to know where is the free threading model constant
Here's the (I think) relevant code from MFC (the pstrThreadingModel value you want is szBoth
which is defined as "static TCHAR szBoth[] = _T("Both");"):
if (nRegFlags & afxRegApartmentThreading)
pstrThreadingModel = szApartment;
if (nRegFlags & afxRegFreeThreading)
pstrThreadingModel = szFree;
if ((nRegFlags & (afxRegFreeThreading | afxRegApartmentThreading)) ==
(afxRegFreeThreading | afxRegApartmentThreading))
{
pstrThreadingModel = szBoth;
}
if (pstrThreadingModel != NULL)
{
HKEY hkeyInprocServer32;
bSuccess = (::RegOpenKeyEx(hkeyClassID, _T("InprocServer32"), 0, KEY_WRITE,
&hkeyInprocServer32) == ERROR_SUCCESS);
if (!bSuccess)
goto Error;
ASSERT(hkeyInprocServer32 != NULL);
bSuccess = (::RegSetValueEx(hkeyInprocServer32, _T("ThreadingModel"), 0,
REG_SZ, (const BYTE*) pstrThreadingModel,
(lstrlen(pstrThreadingModel)+1) * sizeof(TCHAR)) == ERROR_SUCCESS);
::RegCloseKey(hkeyInprocServer32);
}
|
|
|
|
|
Hi....
Thnx a lot for the help....That version thing finally cleared my doubt..
And thnx for that code snippet...I have also used a similar piece of code which I found in some cpp file in the MFC folder....
Thank you
...A Programmer may or may not be the master of the programming language grammar...
|
|
|
|
|
hello Gurus
plz tell me any site which explain
multi threading programming from basic.
thanks
Born To Code
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
