|
how can i put my project folder in repository on server to access the project by all team member. i wanna use cvs for it...but how ?
I dont know that where should i put my folder in server
Dinesh Sharma
|
|
|
|
|
Log onto CVS using your admin account. Use "import module" command. Are you using WinCVS?
ARSALAN MALIK
|
|
|
|
|
I am using cvsNT and tortoise CVS but i know nothing about it... that how to use it ...I am working on ASP.Net so if it would be on server and i 'll access it through client i'll have to configure IIS also.....how is it possible...
pls suggest
Thanx
Dinesh Sharma
|
|
|
|
|
Developing project with EVC++3.0 and EVC++4.0 I have the following problems:
- the environment is working too slow as if there is lack of memory.
- the project is loaded slow, sometimes 4-5 minutes(and it's not big project).
- putting a breakpoint, new line in the source or 'Go To Difinition' to any function is "freezing" the screen for about 20-30 seconds
I clean the intermediate files of the project, re-building it several times, but it's all the same.
somebody know what may cause this delays?
|
|
|
|
|
Does 'intermediate files' include the .opt and .ncb files?
The BP info is in the former, and a corrupt NCB can slow down a project load
Steve S
Developer for hire
|
|
|
|
|
thanks, this fixed the problem, but in EVC, these files were:
*.vcb<br />
*.vcc<br />
*.vco
|
|
|
|
|
Hi, I have a problem with my computer running windows xp pro. It has a problem since yesterday, while windows run around 5 minute since its logon, my computer start to run slowly. I can notify that the mouse pointer could not run smoothly. When I check at the task manager, I found that the CPU usage use 99%. But when i keep my computer around 5 more minute, it become normal. But when i start to move my mouse point it become slow and the CPU start to consume 99% again. I don't why cause it happend like that. Does any one has any comment to solve this problem? Are there any way to check which file or service that could consume CPU alot of resource?
|
|
|
|
|
Open the task manager and see what kind of process is running with 99% from CPU.
Then enter the process name in google.com.
|
|
|
|
|
I already see the CPU usage and check the process that consume the CPU resource. But I didn't found any process that cause the problem. How should I do? do you have any comment?
Note: when I start my computer in safe mode, it don't have a problem like that.
|
|
|
|
|
Now I already setup a new windows on the same drive. But i didn't format it. I use the second operating system to explorer to its drive and delete the system folder only. After i install the nw windows, my computer still have a problem while it is process. Now I suspect to the page file. I have check the root drive and found that the page file consume around 600MB and hibernate file consume around 400MB. So these two file consume around 1GB. Do you have any idea?
|
|
|
|
|
Try using this one : www.sisoftware.net
|
|
|
|
|
Thank you very much for your hyperlink. I will try explorer this website when I have a time. Thank you!!!
|
|
|
|
|
Hi,
Can somebody please tell me if Linux supports the UTF-16 encoding format for Unicode? All links I have found seem to indicate that Unicode on linux == UTF-8. Any links would be greatly appreciated.
Thanks!!
----------------------------------------------
If you need a hammer get C and shut up. If you need a nail gun get C++ and shut up. If you don't need *those* things (and good design should tell you) then by all means get a factory, factory, factory.
--code-frog@codeproject
----------------------------------------------
Why would you need to date, when C++ is your soul mate?!
--Steve Echols@codeproject
-- modified at 8:08 Monday 15th May, 2006
|
|
|
|
|
The Linux kernel treats all files as streams of bytes, it doesn't know anything about character encodings. Applications and libraries running under Linux may support various character encodings, including UTF-8 and/or UTF-16. For example, the GNU C library supports a huge number of encodings that can be listed by the iconv --list command.
The iconv()[^] function may be used to convert between character encodings in a program.
|
|
|
|
|
Thank you!
I am right now using the GTK+2.0 with Pango. Since Pango already has built-in support for UTF-8 and all wchar functions are present in libc my life is pretty good.  I Finally got the program to render unicode characters. ![Jig | [Dance]](https://codeproject.freetls.fastly.net/script/Forums/Images/jig.gif)
But glyph combining for some indic fonts is really bad! 
Wish there were some tutorials for pango though! 
----------------------------------------------
If you need a hammer get C and shut up. If you need a nail gun get C++ and shut up. If you don't need *those* things (and good design should tell you) then by all means get a factory, factory, factory.
--code-frog@codeproject
----------------------------------------------
Why would you need to date, when C++ is your soul mate?!
--Steve Echols@codeproject
|
|
|
|
|
Hi, I wish to develop a suitable setup package that installs a Protocol driver (NDIS) on all network adapters.
I found some trial software that create setup packages however I am having a problem finding one that automates network protocol driver installation.
Kind Regards,
Dave
|
|
|
|
|
Hello All,
I have two netowrks servers (domain servers) running in my office site
with windows 2003 on 192.168.1.*/255.255.255.0
and windows 2000 server on 192.168.0.*/255.255.255.0
both have same subnet mask.
My question:
Is it possible to have these both available and running like a normal windows networking as if there was only one domain server networking?
I am not big networking guy, but i can click  so any instructions will be usfull
Both servers have, active directory, DNS, Application Services
|
|
|
|
|
Farrukh_5 wrote: Is it possible to have these both available and running like a normal windows networking as if there was only one domain server networking?
What do you mean by running like a normal windows networking? You want both server could be able to communicate with each other while is has a difference network id? If so, you need to use router device to connect both network segment.
Farrukh_5 wrote: Both servers have, active directory, DNS, Application Services
Farrukh_5 wrote: if there was only one domain server networking?
As you mention, there is only one domain server but you also declare that your both server has both active directory... Active directory could only exist when you promote your standalone server to a domain controller. Could you clarify about what you mean?
|
|
|
|
|
I've installed active directory on both servers and both are domain controllers. so i have two different domains and domain controllers running in the network with different IP address scopte.
Both Servers are connected in to the same network (same wire netowrk)
---------------------------
http://www.idlsol.com
|
|
|
|
|
Farrukh_5 wrote: I've installed active directory on both servers and both are domain controllers. so i have two different domains and domain controllers running in the network with different IP address scopte
Ok, based on your previous post[^] you will need to have a router device which connect between these two network. Then you will be able to communicate from one network ID to another network ID.
|
|
|
|
|
Assuming that both are connected to the same physical network, then you would open network properties, go to tcp/ip, open advanced, and add the address for the other network i.e. 192.168.x.x
Then if you want to use data from one or the other set up trusts.
Cheers
|
|
|
|
|
I'm trying to install a MSI (LINQ preview in fact), but at some stage it
(unsuccessfully) try to upgrade the C# language service with the error
message:
=====
An error occured while applying security settings. Power Users is not a
valid users group.
=====
But the control panel\User Account don't mention it...
What could I do?
|
|
|
|
|
Super Lloyd wrote: I'm trying to install a MSI (LINQ preview in fact), but at some stage it
(unsuccessfully) try to upgrade the C# language service with the error
message:
=====
An error occured while applying security settings. Power Users is not a
valid users group.
Generally, power user also have the right to install an application on the computer. But in the above information, I think your application might require another built-in account with have a complete right to do anything the computer. The best way to do that is use the secondary logon (right click and choose run as command) with administrative account and set up an application.
Super Lloyd wrote: But the control panel\User Account don't mention it...
What do you mean from here? Please complete your description and try to ask a question again.
|
|
|
|
|
Hi,
Its automatically closing the windows which containing the text "virus" or "anti virus" . How can I recover my machine from virus infection. I cant format it. Because it contains my valuvable informations. Pls help me.
JIJO BABY - Lets Play C#
|
|
|
|
|
Try to start your computer in safe mode environment. And try to run anti-virus to scan for the virus name. If it is not possible, isolate your infection machine from the network and an go to another clean machine to access the internet to download any cleaning tool which is free for use. The purpose is try any method to detect the virus name. Once you got the virus name you could use google to search for the specifi method to clean the virus.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
