|
string GetDefaultPrinter()
{
PrinterSettings settings = new PrinterSettings();
foreach (string printer in PrinterSettings.InstalledPrinters)
{
settings.PrinterName = printer;
if (settings.IsDefaultPrinter)
return printer;
}
return string.Empty;
}
ShowReport()
{
ReportDocument rptdoc = new ReportDocument();
info = clsConnection.GetConnectionInfo();
path = "reports/AccessoryPurchaseOrder.rpt";
rptdoc.Load(Server.MapPath(path));
clsConnection.ConfigureLogonInfo(rptdoc, info);
pfItemYr.ParameterFieldName = "@transid";
dcItemtransid.Value = transid;
pfItemYr.CurrentValues.Add(dcItemtransid);
paramFields.Add(pfItemYr);
rptdoc.SetParameterValue("@transid", transid);
rptdoc.SetParameterValue("userid", userid);
rptdoc.SetParameterValue("systemid", sysid);
rptdoc.Load(Server.MapPath(path));
try
{
rptdoc.PrintOptions.PrinterName = GetDefaultPrinter();
rptdoc.PrintToPrinter(1, true, 0, 0);
rptdoc.Close();
rptdoc.Dispose();
Label1.Text = Label1.Text +GetDefaultPrinter();
}
catch (Exception ex)
{
PreviewViewer.ReportSource = rptdoc;
}
}
|
|
|
|
|
Don't swallow the exception, but log it or display it. If something goes wrong, that's the thing that'll tell you WHAT went wrong.
Without that information, "going wrong" could mean anything.
Bastard Programmer from Hell 
If you can't read my code, try converting it here[^]
|
|
|
|
|
I am getting "No Printers are Installed" error message(Only in published file).
|
|
|
|
|
CR "needs" to have a printer installed. Such a report is based on a print-preview. Now, I don't think that you want to buy one, just to run some reports.
A PdfPrinter[^] (or similar) would "fake" a printer, and if you were to print on it, it'd generate a PDF file. You needn't use the tool, just install it - that way CR has a printer and will stop complaining, even if it's just a "fake" printer.
Bastard Programmer from Hell
If you can't read my code, try converting it here[^]
|
|
|
|
|
Hi,
I have an IE toolbar with a button that runs a bat script with Process.Start. I tried also with a PS script.
When I open IE, the button works. As soon as I navigate to another address or open a new tab, it fails running the script.
I think it has to do with the toolbar restarting each time I navigate to a new address or open a new tab.
private void assign_Click(object sender, EventArgs e)
{
Process.Start("c:\\users\\ccormeni\\Documents\\scripts\\openoneinc.bat");
}
Any help appreciated.
Clovis
|
|
|
|
|
<asp:linkbutton id="Lbtn" runat="server" text="click here">
<asp:panel id="Panel1" runat="server" style="display: none; padding: 10px; border: 1px;
border-style: solid;" backcolor="#FF9933" width="400px" visible="true">
username:
| <asp:textbox id="TextBox1" runat="server">
| | Password: | <asp:textbox id="TextBox2" runat="server">
|
<asp:button id="Button1" runat="server" text="submit" onclick="Button1_Click">
<cc1:modalpopupextender id="ModalPopupExtender" runat="server" targetcontrolid="Lbtn"
="" popupcontrolid="Panel1" backgroundcssclass="backgroundColor" dropshadow="true" popupdraghandlecontrolid="header">
<asp:panel id="Panel2" runat="server" style="display: none; padding: 10px; border: 1px;
border-style: solid;" backcolor="#FF9933" width="400px" visible="false">
<asp:label id="Label1" runat="server">
<cc1:modalpopupextender id="ModalPopupExtender1" runat="server" targetcontrolid="Button1"
="" popupcontrolid="Panel2" backgroundcssclass="backgroundColor" dropshadow="true" popupdraghandlecontrolid="header">
the problem is am not getting my second popup displayed when the submit button of login page in the popup is clicked
sneha
|
|
|
|
|
Have a look at the definition of a modal form:
What is a modal form?[^]
“That which can be asserted without evidence, can be dismissed without evidence.”
― Christopher Hitchens
|
|
|
|
|
In WinForms, one can show a modal form from within a modal form. How is your link being helpful?
Bastard Programmer from Hell
If you can't read my code, try converting it here[^]
|
|
|
|
|
Eddy Vluggen wrote: In WinForms, one can show a modal form from within a modal form. How is your link being helpful?
He is not using winforms...
“That which can be asserted without evidence, can be dismissed without evidence.”
― Christopher Hitchens
|
|
|
|
|
That doesn't change much; whether or not he's using winforms doesn't change the concept.
If it's a limitation of ASP, I'd expect somewhat more explanation than a link to "Let me Google that for you".
Bastard Programmer from Hell 
If you can't read my code, try converting it here[^]
|
|
|
|
|
LMGTFYTPTCBFY
Let me google that for you then paste the contents below for you 
modal form
Web definitions
when a modal form displayed, no other form in the application can receive the focus until the modal form is closed; no other statements...
“That which can be asserted without evidence, can be dismissed without evidence.”
― Christopher Hitchens
|
|
|
|
|
Thanks for the copy/paste. Says the same as the WinForm-version, and does not imply that the modal form itself cannot launch anything. The text that no other statements are executed is an oversimplification; the modal form still has to process paint-operations.
I can imagine "why" it wouldn't work in a webform, but this isn't a valid enough reason.
Bastard Programmer from Hell
If you can't read my code, try converting it here[^]
|
|
|
|
|
I am unable to test it but I thought it was a clue 
“That which can be asserted without evidence, can be dismissed without evidence.”
― Christopher Hitchens
|
|
|
|
|
I'm creating .avi files (using VFW), the files consist of screen capture images displayed at 1 fps. I found some sample code for c# at:
http://www.adp-gmbh.ch/csharp/avi/write_avi.html[]
This creates the ,avi file with my images in. However I'm getting a variable number of blank frame at the beginning of the file. Sometimes over 50 blank frames (a lot at 1 fps!). There appears to be no consistency to the number of blank frames, different codecs or recording lengths have no consistent effect on their number.
Some media players when playing the avi's just show the first correct frame a number of times, virtual dub initially shows them as blank and subsequently as distorted images.
Does anyone have any idea what I may be doing wrong?
James
|
|
|
|
|
Hello
I'm trying to create a program that scan the values and compare values against some average highest or loweste values. It seems to me that the entry is no problem, but getting out of the position is not working as it should.
I'm used to VBA, and there I'd just set up a loop to start IF an entrysignal was trigged. And that loop would run until exitsignal was trigged...
But I'm not experienced at all with writing in C#, so I'm not sure how this code actually runs, ie step-by-step:
if (Value < yesterdayslowest50Value && yyesterdayslowest50Value > yesterdaysValue) {
if (_enableShorting && PositionExists(IQ_TradeStatus.OPEN, symbolIndex, IQ_Direction.SHORT_SIDE)) {
BrokerMarket(IQ_ActionType.BUY_TO_COVER, symbolIndex, 0, IQ_TIF.DAY, "CoverToLong");
}
if (!PositionExists(IQ_TradeStatus.OPEN, symbolIndex, IQ_Direction.LONG_SIDE)) {
int orderIndex = BrokerMarket(IQ_ActionType.BUY, symbolIndex, 0, IQ_TIF.DAY, "Long");
BrokerSetStopLossPercent(orderIndex, _stopLoss, true, "");
BrokerSetTakeProfitPercent(orderIndex, _takeProfit, true, "");
BrokerSetTrailingStopLoss(orderIndex, _isPercent, _trailingStop, "");
}
if(Value > yesterdayshighest13Value && yesterdaysValue < yyesterdayshighest13Value && PositionExists(IQ_TradeStatus.OPEN, symbolIndex))
{
int[] positionIndexes = PositionIndexList(IQ_TradeStatus.OPEN, symbolIndex);
double quantity = PositionQuantity(positionIndexes[0]);
BrokerMarket(IQ_ActionType.SELL, symbolIndex, quantity, IQ_TIF.DAY, "Sell");
}
}
else if (Value > yesterdayslowest13Value && yyesterdayslowest13Value < yesterdaysValue) {
if (PositionExists(IQ_TradeStatus.OPEN, symbolIndex, IQ_Direction.LONG_SIDE)) {
BrokerMarket(IQ_ActionType.SELL, symbolIndex, 0, IQ_TIF.DAY, "SellToShort");
}
if (_enableShorting && !PositionExists(IQ_TradeStatus.OPEN, symbolIndex, IQ_Direction.SHORT_SIDE)) {
int orderIndex = BrokerMarket(IQ_ActionType.SELL_SHORT, symbolIndex, 0, IQ_TIF.DAY, "Short");
BrokerSetStopLossPercent(orderIndex, _stopLoss, true, "");
BrokerSetTakeProfitPercent(orderIndex, _takeProfit, true, "");
BrokerSetTrailingStopLoss(orderIndex, _isPercent, _trailingStop, "");
}
if(Value < yesterdayslowest13Value && yesterdaysValue > yyesterdayslowest13Value && PositionExists(IQ_TradeStatus.OPEN, symbolIndex))
{
int[] positionIndexes = PositionIndexList(IQ_TradeStatus.OPEN, symbolIndex);
double quantity = PositionQuantity(positionIndexes[0]);
BrokerMarket(IQ_ActionType.BUY_TO_COVER, symbolIndex, quantity, IQ_TIF.DAY, "Cover");
}
}
It seems that my code have issues exiting the trades. BTW I've used IQBrokers software to program this.
If anyone see some obviouse mistake I'd appreciate it.
Kind regards
Espen
|
|
|
|
|
lordoftrades wrote: so I'm not sure how this code actually runs, ie step-by-step:
Press F10 instead of F5.
Press F10 again.
Press F10 again.
Press F10 again.
That's how it get's executed, statement by statement. Hover the mouse over a variable to see it's contents.
Bastard Programmer from Hell
If you can't read my code, try converting it here[^]
|
|
|
|
|
Hello
That would have worked fine in VisualStudio, but I writing this code in the software of IQBroker. There are no such step-by-step features as I can see. And I think it will be pretty big mess if I try to open the code in VS, as I'm not sure how to get control over all subcodes and the database too.
Kind regards
Espen
|
|
|
|
|
lordoftrades wrote: I writing this code in the software of IQBroker.
I think you will get better help at http://www.iqbroker.com/[^].
Use the best guess
|
|
|
|
|
lordoftrades wrote: And I think it will be pretty big mess if I try to open the code in VS, as I'm not sure how to get control over all subcodes and the database too.
Create some mock-objects to fake the IBroker-objects and write the logic in a real IDE
Bastard Programmer from Hell
If you can't read my code, try converting it here[^]
|
|
|
|
|
You wrote, that in VBA you would use a loop. However in this code I see no loop at all. Maybe the entry and exit conditions are mutually exclusive and don't appear on the same day?
|
|
|
|
|
I'm just pointing out a minor typo in // When to exit
yyesterdayshighest13Value
|
|
|
|
|
Thanks, I think its supposed to be like this, it was my definiton of the day before yesterday
If I only could be able to go step-by-step I'd better understand how it works
Kind regards
Espen
|
|
|
|
|
Hi,
I have created a window service for tracking the idle time of employee. It tracks the login time,logout time, when system get idle (lock automatically using service) and unlock time.
Sometimes unlock event not firing and not track the time into database.
What may be the problem in it ?? Is there any message pump concept should I follow??
Need the help....
|
|
|
|
|
Are you using a really tiny font to show your code here? Is it hiding in the dot above an i?
|
|
|
|
|
Actually I am not getting what are you trying to say...Is it related to my question???
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
