|
I usually don't comment on a question like this, when the OP has a made a comment of the form "it works," in response to a solution.
But, I'd like to note that, imho, Eddie Vluggen asked what I think is the critical question here:
"The name of a form-object (name property) or the name of the forms' class? In other words, does the form already exist that you're looking for, or are you showing a new instance of that form?"
To which the OP responded:
"Form already exists in the application.
form name is in a string.
how do i open that form."
The code shown in the response by Jean Brandelero will create a new instance of the Form based on its class-name. And, perhaps, that is exactly what the OP wanted.
But, it also seems possible the OP does not want to create a new instance, but to "open" an existing Form.
In that case there are two alternatives:
a. the Form instance is already open, and is visible: your done.
Whether an instance of a Form is visible, or hidden, it's in the Application.OpenForms collection. Note that the collection has a very limited set of operators: you can't use something like 'Contains. And, each Form in that collection is in a "vanilla" type-form: you can't automatically assign it to a variable of the type of FormX: you have to cast the result to ProjectName.FormX.
b. the Form instance is now hidden: your job is to 'Show it.
So, now you can define the alternatives here clearly: based on whether, as Eddie was pointing out, the "string" you have contains a Class Name of a Form, or the string contains the name of a form already created as an instance.
You can use Brandelero's code to create a new instance, if that's what you want, and it doesn't matter to you if there already any other instances of the Type that exist.
And, if you want to create an instance only if an instance does not already exist, or you just want to make sure an existing instance is visible: you can mess around with the Application.OpenForms collection to see what's what.
Let's look at simple test case:
private Form2 newForm2 = new Form2();
private Form2 newForm2a = new Form2();
newForm2.Name = "newForm2";
newForm2.Show();
newForm2.Hide();
newForm2a.Name = "newForm2a";
newForm2a.Show();
newForm2a.Hide();
foreach (Form theCandidateForm in Application.OpenForms)
{
if (theCandidateForm.Name == "newForm2")
{
Console.WriteLine("Found match by Name: " + theCandidateForm.Name);
}
if( theCandidateForm.GetType() == newForm2.GetType())
{
Console.WriteLine("Found match by Type " + theCandidateForm.Name);
}
}The output of this in the VS 'Output window would be:
Found match by Name: newForm2
Found match by Type newForm2
Found match by Type newForm2a
I hope this information adds something to this thread.
“This isn't right; this isn't even wrong." Wolfgang Pauli, commenting on a physics paper submitted for a journal
|
|
|
|
|
|
I have this code for autocomplete:
foreach(string match in myList){
if( !string.IsNullOrEmpty(text_box1) ){
if( match.StartsWith(text_box1.ToString(),
StringComparison.CurrentCultureIgnoreCase) ){
MessageBox.Show(match);
}
}
}
In String "The follow me", case find "the", the string is show me. But case find "follow" or "Follow", is not show. I'm tried with Contains but not solved. What can i do ?
|
|
|
|
|
You are using StartsWith. If you look for "The follow", you will find the string output.
What did you try with Contains?
|
|
|
|
|
With Contains, when find "follow" is show the complete string. But i try with "the fol" no show more, and "the Follow", example, to not show.
|
|
|
|
|
|
Solved the problem with "||":
if( match.StartsWith(text_box1.ToString(),
StringComparison.CurrentCultureIgnoreCase) || match.Contains(text_box1) )
Tanks for all help
|
|
|
|
|
I'm writing some DLL's and have a question.
If I throw the exception in the catch block does the finally ever execute? Reason why I am doing this is because the DLL's do not perform logging, the calling class does. But I need to make sure I dispose of my objects.
Example:
SqlConnection conn = null;
SqlCommand cmd = null;
try
{
}
catch (Exception ex)
{
throw;
}
finally
{
if (cmd != null)
cmd.Dispose();
if (conn != null)
conn.Dispose();
}
IS that proper or should I dispose in the catch block AND the finally block because the finally will never execute since i'm rethrowing the exception?
|
|
|
|
|
The finally block will almost always execute - let all dispose methods remain in the finally block.
|
|
|
|
|
Thanks! That is what I needed to know! Just wasn't 100% if the finally would execute because I threw the error again in the catch block.
|
|
|
|
|
Yes.... code in finally block will always execute unconditionally (unless you shut down the PC by pulling the power cord ...)
|
|
|
|
|
JD86 wrote: make sure I dispose of my objects
In such a case, I prefer a using statement:
using (IDbConnection conn = ...)
{
using (IDbCommand cmd = ...)
{
}
}
Rhe Dispose method of the object will be called when the using block is left - regardless of the reason for leaving.
|
|
|
|
|
I don't really like the using method. No way to really catch errors unless you do another try, catch within the using statement and then that is just redundant.
I just stick to try, catch, finally and dispose of everything myself.
|
|
|
|
|
So use finally, it will do exactly you want. Just to reinforce, yes, it runs all the time, in good or bad cases (exceptions).
|
|
|
|
|
I have an application which I wrote and I also maintain in my facility. Occasionally I add new features based on management's needs. I have the application setup with a Click-Once deployment. Typically I publish the application to a local server. However, my system is on a wireless connection and for some reason the internal network disappears from my list occasionally, so now I can't connect to publish updates directly (second time this has happened). I know that I can publish locally and click "Updates..." to change the update location if it's different from the publish path. Well, how can I publish to my local system but copy it to the server's publish location via USB flash drive? I mean, do I simply copy/paste the content from the local publish folder to the separate (server) location I specify for updates?
djj55: Nice but may have a permission problem
Pete O'Hanlon: He has my permission to run it.
|
|
|
|
|
If you are deploying your click once to a separate server, you need to use Mage (or MageUI) to update the deployed application. There are all sorts of security items in the deployment that need to be updated, and these tools do all the heavy work for you. You can find a simple step by step guide here[^].
|
|
|
|
|
Thank you, I'll read the article today and see where I can get with it.
djj55: Nice but may have a permission problem
Pete O'Hanlon: He has my permission to run it.
|
|
|
|
|
I was testing the garbage collection in C#, and came across something that doesn't make sense to me. I know about Garbage Collection happening "randomly", but I am using GC.Collect() here. Please see code below and then the result information:
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
Method();
Method2();
}
void Method()
{
TestA b = new TestA("first one");
for (int i = 0; i < 10; i++)
{
TestA a = new TestA();
}
GC.Collect();
}
void Method2()
{
}
}
public class TestA
{
string MSG;
public TestA()
{
MSG = "Not first one";
}
public TestA(string msg)
{
MSG = msg;
}
~TestA()
{
MessageBox.Show("Destructing A " + MSG);
}
}
I am getting "Not first one" (destructor and I am assuming GC'ed) 9 times. Then when I close the form I am getting "first one" 1 time and then "Not first one" 1 more time.
My main question is why isn't instance b of TestA being collected on GC.Collect? Are the ones in the for loop falling out of scope, but not the one before my for loop? If so, please explain what is keeping it in scope as Method() has completed.
Thank you.
Respectfully,
D
|
|
|
|
|
DSLoginYea wrote: My main question is why isn't instance b of TestA being collected on GC.Collect?
It's no longer in scope, but that doesn't guarantee that it'll be collected.
If you want to know more about Garbage Collection, there's a lot of documentation[^] on it, including it's inner workings and the reasoning on the design-decisions.
Bastard Programmer from Hell 
If you can't read my code, try converting it here[^]
|
|
|
|
|
Calling GC.Collect() does not mean the GC will run instantly.
Its only an indication that the GC can be run.
|
|
|
|
|
Add a GC.WaitForPendingFinalizers() after GC.Collect() - then the results may come closer to what you expected.
|
|
|
|
|
Hi All,
I am trying to run an existing project by using the F5 option. since this project is set up as a service, it keeps erroring out with message, "Cannot start service from command line or debugger. A windows service must first be installed then started with Server Explorer, windows services admin tool or NET Start Command".
I did google this but comes back with a lot of results. Did someone go through, and if so can you please let me know how you resolved it?
I am new to the windows service in ASP.Net.
Thanks so much.
|
|
|
|
|
|
I do something like the following. Basically you need to have a windows form or WPF app ready to run. You can do this by just adding one to your project. You comment the service and uncomment the forms code to run in VS. Put it back to run as a service. If this isn't already set for you then you have some work to do to make it run, but it shouldn't be hard. This code is in the Program.cs file
static class Program
{
static void Main()
{
ServiceBase[] ServicesToRun;
ServicesToRun = new ServiceBase[] { new myNewService() };
ServiceBase.Run(ServicesToRun);
}
}
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
