|
One barrier that I am hitting with your problem is the lack of a specification for this:
mark_me wrote: where thread 2 and 1 come into conflict
Without a specific definition for that I don't know that I can provide any meaningful help.
mark_me wrote: would i need to use one timer
Again that depends on the specific requirements. My comment was based on your orignal post of 1.5 + 1.5 = 3 hours. However you have now stated that those numbers are NOT part of the requirements.
|
|
|
|
|
led mike wrote: using a finite state machine design
yeah, that's what I would call a boolean flag if I were one of those high-brow consultants too.
Oh wait, I am.
Luc Pattyn [Forum Guidelines] [My Articles]
DISCLAIMER: this message may have been modified by others; it may no longer reflect what I intended, and may contain bad advice; use at your own risk and with extreme care.
|
|
|
|
|
|
Luc Pattyn wrote: that's what I would call a boolean flag
You are likely joking, however on the serious side the OP already talks about changing requirements so when the 3rd feature is requested that boolean flag will be real helpful. I don't like to date myself but I've been around long enough to have OOD/OOP proven effective to my satisfaction beyond any doubt.
And keep in mind, that's with me doing it, so not high quality but it pays off big time none the less. 
|
|
|
|
|
I would put the call to the two processes out into a single thread and then sleep the that thread.
A 90 minute sleep is not a great idea and I would allow for the process to be cancelled.
psudo code for the thread running:
proc1run = now + 180 minutes
proc2run = now + 90 minutes
running = true
while running
sleep 1 minute
if running
if proc1run < now
call proc1
proc1run = now + 180 minutes
if proc2run < now
call proc2
proc2run = now + 180 minutes
loop
Panic, Chaos, Destruction.
My work here is done.
|
|
|
|
|
Hi,
one 90-minute timer suffices, on top of that you need a flag to indicate whether you need to run the other job. Pseudo-code:
bool infrequentJobFlag=false;
void TimerTick {
if (infrequentJobFlag) infrequentJob();
infrequentJobFlag=!infrequentJobFlag;
frequentJob();
}
Luc Pattyn [Forum Guidelines] [My Articles]
DISCLAIMER: this message may have been modified by others; it may no longer reflect what I intended, and may contain bad advice; use at your own risk and with extreme care.
|
|
|
|
|
Hi all,
I've been trying to solve this problem for a while, and no amount of researching or googling appears to be helping! This may not sound completely logical, but I have my reasons for it (I'm converting a very old Delphi program)...
Basically, I wish to display a ComboBox in the ComboBoxStyle.Simple mode, without showing the list portion.
At the moment, I have a property called 'zEnabled'. When this is true, the ComboBox should work 'normally' (i.e. an arrow and a droplist). When it is set to false, the user should still be able to scroll through the options, but not drop the list.
So ideally, for zEnabled = true, I have ComboBoxStyle.DropList, and for zEnabled = false, I have ComboBoxStyle.Simple, but with the list not being visible.
Any help/suggestions greatly appreciated.
|
|
|
|
|
Alternatively of course, if I can just hide the drop down button, I can stifle the drop down behaviour.
So, I'm either looking to hide the list portion in ComboBoxStyle.Simple mode, or hiding the dropdown button...
|
|
|
|
|
How about:
if (! zEnabled)
comboBox1.DropDownStyle = ComboBoxStyle.DropDownList;
else comboBox1.DropDownStyle = ComboBoxStyle.Simple;
CQ de W5ALT
Walt Fair, Jr., P. E.
Comport Computing
Specializing in Technical Engineering Software
|
|
|
|
|
Hi, thanks for the reply.
That's pretty much what it's doing at the moment. The problem is that in 'Simple' mode, the list is displayed as a box below the selection box permanently. It's this bit that I wish to remove, so that the combobox appears like a normal text box.
|
|
|
|
|
Hmmmm. In my test it doesn't show the list at all. It just appears like a TextBox but lets you scroll through the list items with the arrow keys. Did you perhaps set a size parameter or number of items to show?
I simply grabbed a ComboBox and put it on a Form, added a few items, and made a button that changed modes as above to test the behavior.
CQ de W5ALT
Walt Fair, Jr., P. E.
Comport Computing
Specializing in Technical Engineering Software
|
|
|
|
|
Interesting... it does appear to behave itself throughout the program with a pre-designed ComboBox.
However, if I dynamically create a custom ComboBox in code, and change the ComboBoxStyle, the list will not disappear. I've tried adjusting the size of the box but this has no effect, they always appear with an ugly big box underneath.
Why would it do this only for dynamically created ComboBoxes?
Thanks for looking at this with me, it's much appreciated.
|
|
|
|
|
My guess, based on experience, is that there's probably some default parameter in the pre-designed and dynamically created controls that is different, but I have no idea which one.
I've run into that problem with other controls before and tracking down the parameter was tedious. Perhaps you could put a pre-designed control on a form, then add a second one dynamically, then stick in a break point and examine all the parameters one by one to see where the difference is.
CQ de W5ALT
Walt Fair, Jr., P. E.
Comport Computing
Specializing in Technical Engineering Software
|
|
|
|
|
I'm getting the impression that when the component is initially drawn in simple mode it is drawing to a default size - I'm getting around it at the moment with a 'bodge' where I'm explicitly resizing the boxes after they have been drawn - not idea, but it acheives the result.
If I get some I'm going to examine the parameters as you suggested.
Thanks for all the suggestions and help.
|
|
|
|
|
This is a bit of an odd question, but can I select a new row in a dgv and clear the old selection as an atomic operation? I can do it in two statements but that results in the SelectionChangedEvent firing twice.
dgv.ClearSelection();
dgv.Rows[e.RowIndex].Selected = true;
It is a truth universally acknowledged that a zombie in possession of brains must be in want of more brains.
-- Pride and Prejudice and Zombies
|
|
|
|
|
I don't believe that you can.
It is possible to override SetSelectedRowCore where you could put the ClearSelection, but that would, to all intents, be the same as having MultiSelect = false
Henry Minute
Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”
|
|
|
|
|
Can anybody have code , of retrieving the signatures in c# in OUTLOOK 2007.
i am developing an addin in outlook 2007,which sends email
but what i want is that default signature of the sender should be send automatically with each email message.
Regards
“You will never be a leader unless you first learn to follow and be led.”
–Tiorio
"Coming together is a beginning, staying together is progress, and working together is success." Henry Ford
|
|
|
|
|
|
ok , don't give me any code any suggestion.
Please don't give this useless reply.
“You will never be a leader unless you first learn to follow and be led.”
–Tiorio
"Coming together is a beginning, staying together is progress, and working together is success." Henry Ford
|
|
|
|
|
Mogaambo wrote: Please don't give this useless reply
Hardly useless. There you will find poeple who will be only too happy to work for you.
Of course, they will want paying...or had you noticed that?
No trees were harmed in the sending of this message; however, a significant number of electrons were slightly inconvenienced.
This message is made of fully recyclable Zeros and Ones
|
|
|
|
|
It's the most useful reply you will get, trust me.
Either go to rentacoder, or give your client back his money and let someone willing to do research or someone with prior knowledge benefit from their talent. Not a hack like you trying to get free code to profit off of it.
|
|
|
|
|
what is the problem with u , i don't know i think you may be a frustrated coder who are not getting projects from retacoder and for your kind information this not of any client project but it is a project which is asked by my boss, he wants me to develop an addin in outlook which allows him to send multiples message to clients , but not using bcc or cc.one client should get one message and their mail id should be in To:.
I think it is enough for you to understand , dont make this forum ugly for the first time in 2 years i got reply like i too have given critical codes to many fellow members but i didn't ask them blah blah blah.
“You will never be a leader unless you first learn to follow and be led.”
–Tiorio
"Coming together is a beginning, staying together is progress, and working together is success." Henry Ford
|
|
|
|
|
Mogaambo wrote: what is the problem with u
That people like you come and demand code, and you get pissy when you don't get it.
Mogaambo wrote: i don't know i think you may be a frustrated coder who are not getting projects from retacoder
I'm not registered on rentacoder, or I might be, but I have never used the site itself. It's where I redirect tools such as yourself to get work done without trying to rip someone elses work and pass it off as your own, as you admitted to doing here ...
Mogaambo wrote: his not of any client project but it is a project which is asked by my boss
... and to that effect you should get fired.
Mogaambo wrote: dont make this forum ugly
Why would I do this? You're doing a fine job at it yourself.
Mogaambo wrote: i got reply like i too have given critical codes to many fellow members
I went through your posts, and no, you haven't. Not once.
|
|
|
|
|
EliottA wrote: That people like you come and demand code, and you get pissy when you don't get it.
I am just asking has any one done that before bcoz i googled alot and i didn't came up with an answer,
<blockquote class="FQ"><div class="FQA">EliottA wrote:</div>... and to that effect you should get fired. </blockquote>
Why would i, did you know all the answers of c# are you a master or architect of c# who knew every thing or u r genius by birth.I dont know
my boss always happy on my work and i gave him job done in deadline .
Did you not google if you don't know the answers, did u not turned down to codeproject like forums to know your answer.
EliottA wrote: I went through your posts, and no, you haven't. Not once.
I told u i am talking of critical codes which i gave them when they asked me thru email, whether it is paypal code or wire transfer code, i always help to those who asked me thru email.
“You will never be a leader unless you first learn to follow and be led.”
–Tiorio
"Coming together is a beginning, staying together is progress, and working together is success." Henry Ford
|
|
|
|
|
I don't realy understand your attitude: a quick Google gave me two different solutions to your problem. Ok, not in C#, but .NET is .NET is .NET so it would be transferable.
If you didn't "get pissy" as EliottA says, I might have expanded on this, but Hey! I can't be bothered!
No trees were harmed in the sending of this message; however, a significant number of electrons were slightly inconvenienced.
This message is made of fully recyclable Zeros and Ones
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
