|
I'm running ActiveySync v3.7.1 Build 4034 (Not sure what the differences are) on Windows CE 3.0 on a Compaq iPAQ H3800.
- I don't believe there are any network cards in it. There are no expansion cards in it and in my Asset Viewer it doesn't mention anything about network devices.
- I did use a static IP, just a std 192.168.1.x with the settings for my DNS and gateway the same as other machines on the network.
- Wouldn't really know for sure which config I'm running, but I have these settings in Settings, Connections.
... connect to The Internet using Internet Settings
... connect to Work using Work Settings
My network card connects to The Internet
If I try to modify any of the Connections settings, they're empty.
I do have 3 Network Adapters defined in Settings, Network Adapters which is where I setup the details of my network.
AsyncMac1 NDISWAN Adapter
NE2000 Compatible Ethernet Driver
PPTP1 NDISWAN Adapter
I assumed each of these were merely drivers, and didn't specifically relate to a hardware device, as there was nothing showing in the Asset Viewer.
HTH
Thanks
Andre
|
|
|
|
|
Thank you very much.
I have the same in my adapters list. I think they are just the drivers for those adapters.
I will try a static IP. That's the only thing I haven't done yet (we use DHCP here).
If that doesn't work, I guess Viewsonic is different than your iPAQ.
Canada has 6 zones, none of which are erogenous.
|
|
|
|
|
i am new to programming, including visual basic .net. i am running windows xp pro and only have microsofts. visual basic .net standard ed. I am having problems getting everything to run correctly so that i can run programs correctly. Here's what i would like to do; basically start over again from scratch. I have installed the following items; II5, the front page extentions, net framework sdk, msde 2000, microsoft sql and of course the VB .NET standard ed. i can't get the net framework redistributalbe version 1.1 to install for some reason. i also think i used the wrong instancename when i installed MSDE. Well you get my point. What i would like to do is uninstall everything (except II5 and the front page extensions) and start over again. Can i safely remove everything, (except II5 and the frontpage extensions) and then try to reinstall everything correctly? And last but not least, can anyone suggest a web site or an article on how to go about installing everything correctly and in the right order. any help would be appreciated. down the road, i do plan on getting visual studio .net but for now i will have to stick with just the visual basic .net standard ed.
thanks.
Dave Pursey.
|
|
|
|
|
You have MSDE and SQL Server? Pick one...
You can uninstall all this stuff, but there is no guarantee that the uninstalls will COMPLETELY uninstall the application. The installation order should be:
Windows XP
Internet Information Server 5
Front Page Extensions
XP Service Pack 1
SQL Server OR the MSDE
Service Pack 3a for SQL Server/MSDE
Then Visual Studio .NET Standard Edition, which will automatically install:
Windows Component Update pack (if needed)
MDAC 2.7 (if needed)
Front Page Server Extensions Update (if needed)
.NET Framework SDK
Any additional SDK's that are picked
Visual Studio .NET
MSDN Documentation (can't remeber if it comes with the Standard Edtion, though)
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
I use MDI to design my Tablet PC SDK project,
In my project, I need to read a list of pictures and draw on it,
every picture I use a MDIChild Form with an inkPicture control on it to show,
because my Parent Form needs to change the picture of inkPicture,
so I declare
public Microsoft.Ink.InkPicture inkPicture;
but I have a question:
Now I have to change the color of pen in the inkPicture,
if I am in a child Form,I just need to write:
this.inkPicture.DefaultDrawingAttributes.Color = Color.Red;
but if I want to change "every" child form's color in my parent form,
How can I do this...??
I want to use for loop,
but MdiChildren[i] doesn't seem to have inkPicture control...
Can anyone tell me how parent form can use child form's control...??
|
|
|
|
|
I'm trying to create a Custom Security Token in WSE 2.0 that does not use an X509 certificate. I would rather use the Rijndael symetric encryption alogrithm where I generate the key in the client and then include the IV and salt factor somewhere in the SOAP message so they can be used by the server to decrypt the message.
Has anyone successfully implemented something like this or even an example of using a custom security token in WSE 2.0 that doesn't use X509 certs?
|
|
|
|
|
I'm having a problem with ListView. I've created an ImageList with two jpegs in it and assigned it to ListView's LargeIconsList. The images are displaying correctly while working in VS.NET but not while running the app. Any ideas what could be wrong?
|
|
|
|
|
As you know the images attached to your listview are also objects maintained by Image class. For this very reason the image is not automatically embed to you listview object nor to your image class. You keep the path intact the time you call it in your distributed apps by tracking the path of the source image. To avoid such error make sure your passing the correct image path(string value)
|
|
|
|
|
I'm a developer with the new protocol IPv6, and I've surprised when I see that the actually compact framework doesn't support this protocol. I think that It's a big error by microsoft because if Pocket PC 2003 support ipv6, compact framework also should support it.
I'd like, if any way for create a socket connection with ipv6, in .NET?
Thanks for all!!
|
|
|
|
|
Does anyone know a way to execute .NET precompiled assemblies without the original assemblies? To my knowledge, there isn't any. Simple reason: the precompiled assemblies don't have metadata. Thinstall.com seems to have a solution for this. However, I wonder if anyone out there could share their findings.
|
|
|
|
|
Hi,
I incorporated a PLK for my VSPackage. I followed the exact instructions for the PLK implementation as mentioned in the VSIP help (including registering it in the registry). I also verified the PLK info.
When I attempt to run the package (by running project in debug mode – F5, using /noVSIP switch), it gives me an error message “Package XX has failed to load properly…”. Half the time the spawned app just goes blank and hangs and does not even give the pakage load failure message.
However, it does not give any clue as to why the package load failed or what the problem is. Is there any way (any log or anything else) in which I can find out why the package is not loading properly? It does not even produce any trace messages to indicate till what point the load went through.
When I run the app in debug mode (using F5) but without the /noVSIP switch, it runs fine and I can trace through it.
Any help will be greatly appreciated.
Thanks.
|
|
|
|
|
I have created a .NET control that sets its Dock property to DockStyle.Top and the intent is that it will always fill the top of its parent form (it's a toolbar). However, if other controls on the form hosting the control have their Dock property set to something other than DockStye.Nothing my control doesn't always fill the top of the parent form. It depends on what order the controls are added to the form in. For example, if I add a control with its Dock property set to DockStyle.Left then add my new control to the page (the one that's supposed to be at the top), then the new one docks at the top of the form but to the right of the first control.
Do any of you know how I can write my new custom control in such a way that it is always at the top of its parent form?
Thanks for your help.
Rhy Mednick Heart,Soul, Flesh, and Bones
Chicken Scratch Software Because typing is for sissieshttp://www.ChickenScratchSoftware.com
|
|
|
|
|
I'm not sure exactly, but here is an idea you could try.
Use the LocationChanged handler of your control. Whenever that is called, check to see it is on top. If it isn't... Change it's location to 0,0 or send it to the back (hack should make it appear on top).
Like I said, I've never done it before, but I hope this gives you some ideas.
Aaron Eldreth
TheCollective4.com
My Articles
While much is too strange to be believed,
Nothing is too strange to have happened.
- T. Hardy
|
|
|
|
|
Hello!
Im a Java developer who wants to switch to .NET stuff.
I was working using Jakarta Struts (J2EE framework), it is very nice and elegant. So, I wonder if there is a framework like that using .NET technology, including Web Apps and Desktop Apps, for example, a database layer pattern, business processes patterns, an so on.
Thanks!!!
|
|
|
|
|
|
I have a book that I am still working my way through, but looks promising. Its called "Expert One-on-One Visual Basic .NET Business Objects",
by Rockford Lhotka. It presents a comprehensive framework that should be useful for a wide range of applications.
|
|
|
|
|
Rocky complicates things WAY too much imho. He simply reinvents the wheel with every object he creates. The CSLA is not using all that .NET has to offer imho.
We have developped a way better 3-tier architecture internally that uses datasets. It is a lot quicker to code and easier to use!
My 0.02$
|
|
|
|
|
I have a PictureBox on a Panel,
I want my PictureBox can move on the Panel by the mouse,
my mouse's drag and drop just change the position of the PictureBox,
I know it's a simple question but I can't find any examples,
Can anyone tell me where I can find a example...??
|
|
|
|
|
<br />
Dim Xstart As Integer<br />
Dim Ystart As Integer<br />
Dim movin As Boolean<br />
Const Increment As Integer = 10<br />
Const TrueMotion As Boolean = False<br />
Const MOE As Integer = 5<br />
Private Sub Panel_MouseMove(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles pnlMain.MouseMove<br />
If movin Then<br />
Dim ThisPanel As Panel = CType(sender, Panel)<br />
Dim moveX As Integer<br />
Dim moveY As Integer<br />
If TrueMotion Then<br />
moveX = Me.MousePosition.X - Xstart<br />
moveY = Me.MousePosition.Y - Ystart<br />
Else<br />
moveX = Me.MousePosition.X - Xstart - ((Me.MousePosition.X - Xstart) Mod Increment)<br />
moveY = Me.MousePosition.Y - Ystart - ((Me.MousePosition.Y - Ystart) Mod Increment)<br />
End If<br />
ThisPanel.Top = moveY<br />
ThisPanel.Left = moveX<br />
pnlBlack.Left = ThisPanel.Left - pnlWhite.Left<br />
pnlBlack.Top = ThisPanel.Top - pnlWhite.Top<br />
If ThisPanel.Top + MOE >= pnlWhite.Top And ThisPanel.Top - MOE <= pnlWhite.Top And ThisPanel.Left + MOE >= pnlWhite.Left And ThisPanel.Left - MOE <= pnlWhite.Left Then<br />
Label1.Visible = True<br />
Else<br />
Label1.Visible = False<br />
End If<br />
End If<br />
End Sub<br />
<br />
Private Sub Panel_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles pnlMain.MouseDown<br />
movin = True<br />
Dim ThisPanel As Panel = CType(sender, Panel)<br />
ThisPanel.BorderStyle = BorderStyle.FixedSingle<br />
Xstart = Me.MousePosition.X - ThisPanel.Left<br />
Ystart = Me.MousePosition.Y - ThisPanel.Top<br />
End Sub<br />
<br />
Private Sub Panel_MouseUp(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles pnlMain.MouseUp<br />
movin = False<br />
Dim ThisPanel As Panel = CType(sender, Panel)<br />
ThisPanel.BorderStyle = BorderStyle.None<br />
If ThisPanel.Top + MOE >= pnlWhite.Top And ThisPanel.Top - MOE <= pnlWhite.Top And ThisPanel.Left + MOE >= pnlWhite.Left And ThisPanel.Left - MOE <= pnlWhite.Left Then<br />
Me.Close()<br />
End If<br />
End Sub<br />
<br />
Private Sub btnNewPanel_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnNewPanel.Click<br />
Dim Newpanel As System.Windows.Forms.Panel<br />
Newpanel = New System.Windows.Forms.Panel()<br />
Newpanel.Location = New System.Drawing.Point(50, 50)<br />
Newpanel.BackColor = System.Drawing.Color.FromArgb(255, 192, 192)<br />
Newpanel.Size = New System.Drawing.Size(40, 40)<br />
Me.Controls.Add(Newpanel)<br />
AddHandler Newpanel.MouseUp, AddressOf Panel_MouseUp<br />
AddHandler Newpanel.MouseDown, AddressOf Panel_MouseDown<br />
AddHandler Newpanel.MouseMove, AddressOf Panel_MouseMove<br />
End Sub<br />
Aaron Eldreth
TheCollective4.com
My Articles
While much is too strange to be believed,
Nothing is too strange to have happened.
- T. Hardy
|
|
|
|
|
Thank you very much ~
I forget to say I use C# language...
I read your code and mostly know what I should do in every event handler,
but I still have some questions,
1.
During MouseMove,if I don't use a ---(dot line) Rectangle,
would the picture in the PictureBox flicker...??
And how to draw the Rectangle...??
2.
And mouse events should be write in the PictureBox_MouseXX or Panel_MouseXX...??
Thank you for your answer
|
|
|
|
|
When the application is running,how can i update the componets (dlls)the app used?
thanks a lot
|
|
|
|
|
How can make the tcpchannel stop listening the port without stop de application?
Thanks a lot!
|
|
|
|
|
hi,
You can do so by using :
System.Runtime.Remoting.Channels.Tcp.TcpChannel().StopListening();
method...
Hope this solves your prob...
regards,
Aryadip.
Cheers !! and have a Funky day !!
|
|
|
|
|
o, thanks for your replying!
but it seems do not work as expected!
the port is still open,then i use System.Runtime.Remoting.Channels.ChannelServices.UnregisterChannel ,and it's ok!
thanks a lot,my dear friend!
|
|
|
|
|
It might have worked but it doesnt seem to be the correct procedure. The next time you need the tcpchannel to listen again then you have to register it. Succedding calls mean registering and unregistering the channel and thats quite tedious process and surely wud entail performance penalty. Is there other way we cud do that?
|
|
|
|