|
We all have so much to learn 
|
|
|
|
|
|
|
|
Hi all,
I'm starting to think I'm not well made...
Years ago, in the company I worked for) I had to fight with the people who made the tables for our department as they thought the height I wanted was too low.
Now I'm working as freelance and I have a table that is 74,5cm (29.3 inches).
After setting my chair height as all the internet sites and the chair manufacturer recommend, I need a foot rest, which I don't like as I must stay at a defined position.
I'd prefer to have my table in a lower position and then being able to regulate it (regulate it's height to get it right).
I've been searching for height regulable desktops and most of them start at 70cm (27.5 inches).
I would like a table that would start at 65cm (25.6 inches) but it doesn't seem an easy thing.
Which is your table height?
Thanks!
|
|
|
|
|
I put a keyboard/mouse drawer under the table and it is about 25.5" from floor.
Table top is 31"
If you can keep your head while those about you are losing theirs, perhaps you don't understand the situation.
|
|
|
|
|
Height adjustable standing desk that can be used standing or sitting. Good so you can have different height as and when you please. Also good when you hurt your back!
A Fine is a Tax for doing something wrong
A Tax is a Fine for doing something good.
|
|
|
|
|
Mine is a "standard cubicle desk" (though it's not in a cube) with a desk height of 72cm (adjustable a couple of cm up or down via screw feet) and my elbows rest on my chair arms with my feet flat on the floor, and a slight "down" angle to the top of my monitors.
I'm around 174cm short (and mostly leg) and it works fine for me.
Have you considered a saw?
Sent from my Amstrad PC 1640
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
OriginalGriff wrote: Have you considered a saw?
Why not platform shoes?
My desk is fixed at 76 with a kb drawer at 66 (mouse is on the desk) or a stool beside me. Adjustable office chair about 15 cm below kb, arms same hight as kb.
Often on my back in the chair ass almost hanging off the edge, head level with the bottom of the screen and feet somewhere above the screen.
(yup, really like that right now! ... only sit 'normal' for longer intensive typing sessions.)
This internet thing is amazing! Letting people use it: worst idea ever!
|
|
|
|
|
Lopatir wrote: head level with the bottom of the screen
Bad for your eyes, apparently: Computer Eye Strain | Eye Health | Specsavers UK[^]
And that leads to problems later in life (as does bad posture - it contributes to back problems later, and you really don't want those!)
Sent from my Amstrad PC 1640
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
I'm usually 30 or so inches away from the screen (much more when watching movies) and many breaks.
for the back: almost daily exercise - mostly cardio & stretching incl couple of hours extreme hard cycling 5 days a week, and believe it or not done correctly the strange posture maintains flexibility (use muscles to bend, not objects). Only thing that gives me a sore back is standing and sitting still too long and soft mattresses.
getting old: still looking for a cure; though working less (semi retired) mitigates some of the downsides.
This internet thing is amazing! Letting people use it: worst idea ever!
|
|
|
|
|
My desk height is 29". Unfortunately, my desk chair (at home) is about 1/2" too short, so I sometimes use a cushion to ensure I don't get a backache when working for several hours at home.
/ravi
|
|
|
|
|
Have you considered buying a saw and cutting the legs down? 
Keep your friends close. Keep Kill your enemies closer.
The End
|
|
|
|
|
R. Giskard Reventlov wrote: Have you considered buying a saw and cutting the legs down?
Cause that always works out well and level.
Michael Martin
Australia
"I controlled my laughter and simple said "No,I am very busy,so I can't write any code for you". The moment they heard this all the smiling face turned into a sad looking face and one of them farted. So I had to leave the place as soon as possible."
- Mr.Prakash One Fine Saturday. 24/04/2004
|
|
|
|
|
Joan M wrote: After setting my chair height as all the internet sites and the chair manufacturer recommend,
Aside from all of the answers on how everyone else sits, I suggest but one thing: don't listen to what the 'internet sites . . . recommned'. They don't have your body. Proportions vary - long torso, long legs, the basic built in padding along with any from eating too much (or bones from eating too little).
Like panty hose, "one size fits all" only means it's easier for it to get a tear.
For what it's worth, I've no clue or interest in measuring my desk height, chair height, or any of the rest. If it's comfortable - that'll work for me.
| Ravings en masse^ |
|---|
| "The difference between genius and stupidity is that genius has its limits." - Albert Einstein | | "If you are searching for perfection in others, then you seek disappointment. If you are seek perfection in yourself, then you will find failure." - Balboos HaGadol Mar 2010 |
|
|
|
|
|
W∴ Balboos wrote: Like panty hose, "one size fits all" only means it's easier for it to get a tear.
Didn't realize we had a resident expert on panty hose. Hey, whatever floats your boat, man.
|
|
|
|
|
dandy72 wrote: Hey, whatever floats your boat, man
It makes a great inner layer if you like cycling in very cold weather.
Not that I would do anything silly like that  .
Software Zen: delete this;
|
|
|
|
|
Gary Wheeler wrote: cycling in very cold weather
Define cold.
As a Canadian, if you need an "inner layer", then that means the roads are covered in ice/snow and unfit for any 2-wheel vehicle anyway (I wish people actually understood that).
|
|
|
|
|
<0°C; I'm an Ohioan(*), not Canadian.
(*) Mother Nature says you can't have all four seasons in one day. Ohio replies "Here; hold my beer."
Software Zen: delete this;
|
|
|
|
|
never properly looked into it but don't people have varied proportions? not every one has the same arm length to torso length to leg, inside, outside and so on?
But hey, don't get me wrong cliche. Manufacturing off such a system for clothing allows for the relative low cost of clothing.
Desk - which your likely spending 1/3 - 1/4 of your life at. Spend a decent amount that you can, and same for manufactures. Has no one figured out a way to add/remove a few centimetres to desks without breaking the bank, or stability?
|
|
|
|
|
Joan, you are made fine. Just everyone is different. I am 6'(182cm) tall mostly in my torso, My legs are very short. 28"(71cm) I like my desk to be as low as possible. Fortunately my desk is adjustable. I have it at 26.5"(67cm) and wouldn't mind it a bit shorter.
I have been in so many battles with ergo people telling me how to sit. I am 50 and if I sit any higher my back hurts and my legs hurt and my arms hurt. So no, I sit how I sits. and if I fits I sits longer and better.
To err is human to really mess up you need a computer
|
|
|
|
|
Simples! Just grow taller! I did (1.90m) and now my desk fits perfectly.
- I would love to change the world, but they won’t give me the source code.
|
|
|
|
|
currently 29-30", was a few inches higher at my old job (the only good thing about cube furniture). I'm looking at an Uplift Desk to get the height back at home. Their desks go down as low as you'd like, but unfortunately they're a US company and their international shipping is almost a lost cause (Desk frames only, minimum order of $2k), so unless you can find a reseller they're probably out of the question.
Did you ever see history portrayed as an old man with a wise brow and pulseless heart, weighing all things in the balance of reason?
Is not rather the genius of history like an eternal, imploring maiden, full of fire, with a burning heart and flaming soul, humanly warm and humanly beautiful?
--Zachris Topelius
Training a telescope on one’s own belly button will only reveal lint. You like that? You go right on staring at it. I prefer looking at galaxies.
-- Sarah Hoyt
|
|
|
|
|
I got one of these:
Work smarter with Standing Desks, Ergonomic Chairs by Autonomous
And I love it. Not too much $, and only a little hassle to assemble. (Small house. Built it in the kitchen, didn't fit down the narrow hallway so I had to partially disassemble then reassemble in my office.)
Disclaimer: I am in no way affiliated with this company...other than being a customer.
|
|
|
|
|
The desks at my office are not adjustable so I end up sitting cross legged on my chair.
In my 40 years in the computer business only one place I worked at (a startup) had adjustable desk heights. Unfortunately, I was only there for a little over a year since the place went down the tubes in the dotcom crash.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
