|
You are probably looking for one of the "docking" solutions. I've seen those in pre-manufactured computers from HP and Medion. They have a "docking port" in one of the 5.25" bays that takes a (i think) 2.5" notebook HDD in a special "docking case". If you want to take it along with you, you hook it up to a USB cable, which allows you to use it with other computers without a "docking port". As far as I know, the "docking port" is simply a modified USB-port and requires a mainboard with unused USB ports that you can use for this purpose.
Cheers,
Sebastian
--
Contra vim mortem non est medicamen in hortem.
|
|
|
|
|
A few years back, PC hardware suppliers stocked housings which you fitted into a 5.25 inch slot and connected to a motherboard IDE connector and to a hard-drive power supply cable. They had a removable tray which took a normal 3.5 inch IDE drive. Sometimes they had a small fan, other times they just let the hard drive overheat.
Very useful for large backups (cheaper than a tape drive, etc.)
The hard drive was not hot swappable, since it used the normal IDE interface.
|
|
|
|
|
I have several phones which I need to connect via bluetooth in the office. We have an old conceptronic CBTU dongle which works with the default windows xp sp2 software - i.e you can right click on any file in explorer and choose "send via bluetooth".
However, we needed a second dongle and tried buying several new dongles. None work with the default xp software. They do work with the propriety software that comes with the device, but they all have problems transfering files to certain phones.
|
|
|
|
|
Hi all,
I have just encountered a very severe and surprisingly obscure problem.
The network connection (single NIC computer) keeps giving the message "Network cable unplugged" then immediately "Enabled" etc etc. I.e. a stable connection is unattainable. While it's enabled however it does correctly get an IP from DHCP and can (momentarily) browse the WWW etc.
Details: Clean (30 minutes old) Win2k Professional installation on a Proliant 1200 server, Netelligent 10/100TX NIC onboard. Using NIC driver supplied with Win2k, according to websites this is the newest available (hp.com down for me so I can't verify).
I've tried searching the web to no avail; I can find no one else with this same problem. Rather severe and desperate  - what could I possibly try?
If any more information is needed please post and I'll try my best to provide it.
TIA very much 
modified 18-Jul-18 11:59am.
|
|
|
|
|
That's an unusual problem. Right off the bat I'm wondering what you would see if you looked in the system event logs and the application event logs. If you see anything let me know. Then I'd replace the cable being used. If replacing the cable didn't work I'd use a different port on the switch. I'm also suspect of duplicate IP's on the network but you should see a notice of that...
Try the event logs, swapping cables and switch ports then let me know how it goes. Also look at the status of the adapter in the "Device Manager" right now and then after you get that message. See if there is an IRQ conflict there. It might be just assigning a new IRQ is all you need to do.
|
|
|
|
|
The event logs are useless; they are FULL of messages from Tcpip service to the tune of "connected to network and initiated normal operation". Bizarre.
The cable/port issue seems unlikely as nothing changed physically during the reinstall, and just before that, under NT4 Server, network was completely operational. This makes me suspect Win2k.
I also thought of the conflicting IP issue but I've made sure that's not the case. DHCP/static setting both have the same problem.
I've tried swapping cables to no avail.
modified 18-Jul-18 11:59am.
|
|
|
|
|
Make sure IPv6 didn't get installed somehow... Aside from that power down the box and reseat the card perhaps even try a different slot for it.
I've seen similar problems that had no plausible explanation and moving stuff around fixed things up. You could start doing things like "ping -t www.google.com" and record how often the connection is dropping. If it's on 20 seconds and every 20 seconds then you have some clues. If it's very random with no visible pattern then no joy there.
One thing you might attempt is getting a small portable router and just plug it into the router and see if it will hold a connection. If that works you know it isn't on the server. Somehow you need to isolate the problem to one of the 3 main areas (Switch, Cables, Server). If you can remove two of the variables then boring into the one remaining becomes easier.
I can definitely agree with pbraun that when you see that notice it often does mean a poor or faulty connection somewhere. How to determine where/if is a PITA but...
Without more information I'm not sure what else to tell you. You could get a KNOPPIX bootable CD/DVD and boot into it and see if KNOPPIX or a similar product (BartPE) can get and hold a network connection. This would tell you if it's software or hardware and booting KNOPPIX/BartPE is much easier than reloading the OS.
- Rex
|
|
|
|
|
|
Yeah, going off what you are saying I bet SP4 fixes the problem. I'd be very surprised if it didn't.
|
|
|
|
|
I darn well hope so. It's 50% downloaded now
modified 18-Jul-18 11:59am.
|
|
|
|
|
Argh. Just installed SP4 - you guessed it, no change.... 
This really sucks. I don't think there's a newer driver to be found as the hardware is really old.
NT4 worked - maybe I'll have to go back to using that, but unfortunately that's quite a bit less usable in this situation...
modified 18-Jul-18 11:59am.
|
|
|
|
|
Who's the card manufacturer? I'm not buying that you cannot run Windows 2000 on it. It's the release right after NT 4.0 so it works somehow.
Try deleting the card from the device manager (uninstall it) reboot and let Windows auto-detect a new updated driver for it.
|
|
|
|
|
code-frog wrote: Try deleting the card from the device manager (uninstall it) reboot and let Windows auto-detect a new updated driver for it.
Had already tried that, for the formality I tried again; no go 
I am considering trying XP for interest sake, though probably the supplied driver is the same... Don't really know what else to do as NT4 isn't really an option (possibly at a push) but as you say, I agree, I also refuse to believe it won't work.
It's a Compaq Netelligent 10/100TX PCI Embedded UTP controller (one of those with AUI port).
modified 18-Jul-18 11:59am.
|
|
|
|
|
If that's a bundled server that came from Compaq then if you went to the Compaq site (now hp.com) you would find the right drivers just by typing in the name of the server in the Software Download section. If you can't then I'm betting if you Google "Compaq Netelligent 10/100 PCI UTP Windows 2000" you'd get good hits.
|
|
|
|
|
I had indeed already looked at hp.com (and google) (same link as you gave). The driver they had corresponded (nearly - build incremented from 18 to 22) with the one I got off the SmartStart cd for servers which is the newest version applicable to the 1200 series.
Version 5.0.1.22C now installed. No difference.
modified 18-Jul-18 11:59am.
|
|
|
|
|
|
I've seen this plenty of times and field service often told me this was happening.
This issue is not a software problem, it is a hardware problem. The trouble is that the wires are not maintaining a connection to your card. How to diagnose is to grab the cable physically and wiggle it into a position where it remains connected. The solutions are to get a cable that fits properly and stays connected, or to replace the network cable or network card.
Phil
|
|
|
|
|
Sounds plausible, except before the format today the same server worked perfectly (this morning still) with the same network cable etc. The server also hasn't moved since the format. The only change is the OS.
Have in the mean time tried a different (known working) cable with no effect unfortunately.
modified 18-Jul-18 11:59am.
|
|
|
|
|
Was the driver reverted to a previous version that had problems? Is there an update for the driver that you should install?
Phil
|
|
|
|
|
Both the standard Windows 2000 driver and the updated drivers off the Compaq SmartStart disc have the same problem.
As a side note, I've reformatted the computer a second time and installed Win2k again in case that would help a phantom error, but this also hasn't helped...
Thanks anyway for the suggestions so far. Is there anything you can think of that I may have missed?
modified 18-Jul-18 11:59am.
|
|
|
|
|
The latest Service Pack for Windows 2000...?
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
Unfortunately that didn't help. Thanks anyway 
modified 18-Jul-18 11:59am.
|
|
|
|
|
Network cards have been known to go bad on occasion. It doesn't matter if they were previously running well.
Would it be possible to replace the card with an identical one? Have you tried using a different port on the switch or router?
Isolating the problem is always the hardest part of trouble shooting.
Phil
|
|
|
|
|
Unfortunately the card is on-board, and I don't have a spare PCI card lying around. If not solved soon I might indeed look into just swapping the card.
The router seems to be in perfect order as my other PC can talk to it on that port/cable.
modified 18-Jul-18 11:59am.
|
|
|
|
|
Not the network card.
Works perfectly like it used to under Knoppix, with the same cables/port/physical config.
Argh. Back to the drawing board 
modified 18-Jul-18 11:59am.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
