Hardware & Devices

FirstPrevNext

Re: PnP, Hardware Interface Steve S16-Aug-06 3:11 Steve S 16-Aug-06 3:11  Well, you can buy USB analogue/digital I/O components, but bear in mind that typically they have a ~20ms delay on processing commands (eg writing takes 20ms, reading another 20ms). In terms of firmware/software, you're pretty much on your own; you get a DLL and/or device driver to allow you to configure the I/O and read/write it, and that's it, although generally speaking you can then use them from any C/C++/VB app. Are you looking at cash drawers as well? AFAICR, these are available off the shelf, with an input to force an 'open' and an output to report the 'closed' state. Integrating all these won't necessarily be pretty, and you may find that there are limits on how many devices you can use from a single PC. I've used a small Velleman kit for USB I/O (which has fewer I/O lines), for example, and you can only connect 4 such devices on the USB bus, even going via a powered hub. Steve S Developer for hire Re: PnP, Hardware Interface Bram van Kampen16-Aug-06 13:47 Bram van Kampen 16-Aug-06 13:47  Thanks steve. The question is where, from whom,at what price! I would accept the 50 ms delay,(Ido not think that staff would notice that the delay between hitting the Chash Button, and the drawer opening) and Four Cashdrawers per terminal suounds fine. I've given up on USB for apps like this, because the development in this are seems to concentrate on speed! I could give you thousands of development applications for anyone who would develop a USB unit, which could switch say 100 relays, with a delay of say 500 ms quite acceptable! Most real world applications, like switching of the Air Conditioning, do not require split second timing! Where are Cash Drawer boards and API's to run same available off the shelf? Names, Addresses,Costs Many thanks for your support Regards LateNightsInNewry Re: PnP, Hardware Interface Steve S16-Aug-06 21:59 Steve S 16-Aug-06 21:59  Well, last time a company I know needed one, they did a google on 'USB digital I/O' and then it was a case of price shopping. With the advent of stuff like small microcontrollers with USB built-in, they are becoming more widely available. The Velleman ones I have (which have fewer I/O lines, I think 5 in and 8 out, but does have analogue too) I bought from Maplin Electronics, who periodically put them on sale prices (in both kit and prebuilt forms). Don't know if they operate in Ireland, though, but there ought to be an equivalent. Some of the more expensive stuff includes optoisolators etc to stop any 'accidents' from frying USB host controllers in the PC etc. I prefer USB because it makes it easier to demo stuff from a laptop, which you can't exactly plug cards into OTOH, it does limit the number of lines, but being able to plug in more than one device can help make up for it. Don't know about cash drawers, but again, google should be able to help, just a question of finding the right buzzwords (cash/terminal/drawer/POS etc). There is a company I did some Win32 training for in Otley, W.Yorks; they make POS stuff (called, amazingly enough, Point of Sale Systems), but that was a while back. They might know, so I'll see what I can find out... Steve S Developer for hire Re: PnP, Hardware Interface Steve S17-Aug-06 0:22 Steve S 17-Aug-06 0:22  They use cash drawers which are RS232 or USB. I think google is your best bet... Steve S Developer for hire Re: PnP, Hardware Interface Dan Neely17-Aug-06 2:15 Dan Neely 17-Aug-06 2:15  Roughly a decade after usb was released to do so, the legacy ports are finally starting to be removed from PCs. If you go with rs232 now, you run the risk of not having easy access to new hardware a few years down the line. Re: PnP, Hardware Interface Steve S17-Aug-06 3:06 Steve S 17-Aug-06 3:06  Yup. I have a serial port programmer for Microchip processors, and sadly, I don't have a serial port on my laptop... Fortunately, my desktop machine does have such a thing, and I very rarely need to reprogram one on site... Steve S Developer for hire Re: PnP, Hardware Interface Dan Neely17-Aug-06 3:30 Dan Neely 17-Aug-06 3:30  They;re starting to disappear from desktops as well. I looked about 6mo ago, and about 1/3rd of the mobo brands on newegg no longer had serial, parallel, or game ports. Instead the space was used for even more usb ports and additional ventspace. Re: PnP, Hardware Interface Bram van Kampen17-Aug-06 14:42 Bram van Kampen 17-Aug-06 14:42  steve, Thanks a lot for your reply. Yes, Maplin does operate in Ireland. A Cash drawer is electronically a simple but crude device. it consists of a solenoide to release the catch so that it opens, and a microswitches, which tells if it is open closed, or "No Cash Insert Present", i.e. the replacable plastic innards with pigeon holes for the Notes and coin is physically missing. Microswitches and Solenoides typically operate at power levels far greater than provided by PC in and out ports. Most microswitches in my experience need to operate at at least 24 Volt 5 mA, to avoid long term degradation such as Dirt and Corrosion. The sparking at these lpower levels helps to keep things clean. Most solenoides for Mechanical action in this type of application take at least 24V and 50 mA . This is dictated by the scale of mechanical rigidity required to deter casual vandalism. Again, Many thanks for your help. Regards BramVanKampen@aol.com LateNightsInNewry Enabling/disabling a device Shivian7-Aug-06 15:08 Shivian 7-Aug-06 15:08  Hi, I have a problem with a USB device in that it frequently fails when I try to connect to it to update its application. The manufacturer points out that this is a known problem and the solution is to disable and re-enable the device in Device Manager but this is, when I update the application to test something sometimes once a few minutes, a rather tedious and slow task. The two devices, as listed in Device Manager are "Communications cable between two computers" in "Modem" and "SAGEM MONETEL EFT30 USB PORT (COM5) in "Ports (COM & LPT)". Does anyone know how I can do this or what API I can use to do it? Thanks in advance Re: Enabling/disabling a device mmhu11-Aug-06 4:36 mmhu 11-Aug-06 4:36  Each time when I plug in USB memory stick to the pc, there is a window pops out. I have application to indicate whether a USB memory stick presents.I don't want this auto window to pop out. How shall I resolve it?? Re: Enabling/disabling a device fat_boy16-Aug-06 7:20 fat_boy 16-Aug-06 7:20  this is a known windows 2000 bug. to fix it you need to put a filter driver over usbstor.sys that mods the response to IRP_MJ_QUERY_CAPABILITIES. Truth is the subjection of reality to an individuals perception Re: Enabling/disabling a device fat_boy16-Aug-06 7:18 fat_boy 16-Aug-06 7:18  look at the setupdixxx functions, you can enable and disable a device programaticaly. Truth is the subjection of reality to an individuals perception Re: Enabling/disabling a device Shivian16-Aug-06 11:15 Shivian 16-Aug-06 11:15  Thanks I'll look into it. serial port kyawnaing5-Aug-06 10:15 kyawnaing 5-Aug-06 10:15  I want to control my UPS from my C#.Net program. if you please help me. kn Re: serial port eggie55-Aug-06 21:15 eggie5 5-Aug-06 21:15  Are you implying you want to do it via the Serial Port? See the SerialPort class in .net 2.0. After that, you'd have to do some API searching... /\ |_ E X E GG one problem maria....5-Aug-06 5:21 maria.... 5-Aug-06 5:21  hi,can you help me? I have a problem with console page... when I type cmd in "Run" bar (in start menu), it resets my computer... thanks maria... Re: one problem Dave Kreskowiak5-Aug-06 7:21 Dave Kreskowiak 5-Aug-06 7:21  Your probably infected with a virus or a Trojan. Scan your machine and you might come up with some interesting results! Dave Kreskowiak Microsoft MVP - Visual Basic Re: one problem Bram van Kampen13-Aug-06 13:38 Bram van Kampen 13-Aug-06 13:38  Sounds as if something got seriously corrupted in the Registry. Never happened to me before, but then again,I never tried 'cmd' either! I always use 'command.com' cmd is a reference to 'c:\windows\System\command.com'on my system. If you type in the above system path, and you get the DOS Screen, there is nothing wrong with the command processor, but you should investigate. Start with opening the Registry and search for 'cmd' , follow from there. N.B. The fact that you want to break into character mode (DOS Screen) makes me think that you're well used to .Bat and .Ini files Well, those AutoExec.Bat and Sys.Ini files have gone. That information is now stored in the System Registry. Please read books about the registry, and familiarise yourself with the subject before you make any changes! LateNightsInNewry Re: one problem javadarefi16-Aug-06 22:52 javadarefi 16-Aug-06 22:52  Hi Two weeks ago I had this problem. I think that you've got a virus. Do you have any anti virus? If you have update your anti virus,but I think you have to reinstall your windows Regards M.J.Arefi reading data rate in scazzi harddisk? Andy Rama5-Aug-06 0:35 Andy Rama 5-Aug-06 0:35  Can I read data at rate of 400MBps or more in Scazzi Harddisk? Re: reading data rate in scazzi harddisk? Dave Kreskowiak5-Aug-06 4:30 Dave Kreskowiak 5-Aug-06 4:30  You'll have to clarify this a bit. Are you looking to TEST the data rate or are you trying to see what the drive says about itself?? And it's SCSI (pronounced SCUZI)... Dave Kreskowiak Microsoft MVP - Visual Basic Re: reading data rate in scazzi harddisk? Mike Dimmick5-Aug-06 17:03 Mike Dimmick 5-Aug-06 17:03  No. Even 15000rpm SCSI disks cannot sustain this transfer rate. The quoted transfer rates on Parallel IDE (133MBps), Serial ATA (1.2Gbps, 2.4Gbps for SATA-II), Ultra Wide SCSI 320 (320MBps) and Serial Attached SCSI (SAS, 3.0Gbps) are simply the theoretical speeds available on the transfer bus. If reading from or writing to the drive's on-board cache, this transfer rate can be achieved, but only (of course) up to the capacity of the cache, which is typically in the 8MB to 16MB range. Stability. What an interesting concept. -- Chris Maunder Re: reading data rate in scazzi harddisk? Dan Neely7-Aug-06 2:22 Dan Neely 7-Aug-06 2:22  Once you've flushed/saturated the cache, a 7200 rpm drive will run at ~66Mbps. Playing audio in 5.1 multi channel sound card. jyoti_manoj3-Aug-06 22:41 jyoti_manoj 3-Aug-06 22:41  I have an application where 4 audio files are played simultaneously in two channels of two conventional stereo cards. I have to migrate this to playing using a 5.1 system. There are limitations to existing WAVEFORMAT which does not identify multi channel device. Can anyone help me with the procedure how to pack the audio packets (for 4 files) and assign to the multi channel sound card? Any help is highly appreciated. Thanks in advance. Manoj Connecting router with xbox 360 via wireless lan Stefan Spenz3-Aug-06 21:15 Stefan Spenz 3-Aug-06 21:15  Hi, setup: Router, connected to the internet, and a xbox 360 console several rooms away. They are not connected with a ethernet cable. Now I want to plug an ethernet cable into the xbox which connects to a wlan adapter, and I also want to plug an ethernet cable into the router which connects to another wlan adapter. These two adapters have to connect to each other so that it's quasi a wlan bridge between these two replacing the physical ethernet cable. Is this possible? What kind of wlan adapters do I have to buy? How do I setup them? I want the stuff to work just like a normal LAN. Regards, Stefan

Last Visit: 31-Dec-99 18:00     Last Update: 17-Jun-24 13:37 Refresh ᐊ Prev1...203204205206207208209210211212 Next ᐅ

General    News    Suggestion    Question    Bug    Answer    Joke    Praise    Rant    Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.