|
Yes, you can install a driver programatically. You can use setupcopyoeminf() or you can create the service key entry directly, and set the driver to autostart.
Truth is the subjection of reality to an individuals perception
|
|
|
|
|
I need help transfering files between Windows(NTFS) and Linux(ext2)! I need a program or method for doing it.
--------------------------
Eric
I still need to learn C++!
--------------------------
|
|
|
|
|
ftp?
Charlie Gilley
Will program for food...
Whoever said children were cheaper by the dozen... lied.
My son's PDA is an M249 SAW.
My other son commutes in an M1A2 Abrams
|
|
|
|
|
Tuotrut wrote: I need help transfering files between Windows(NTFS) and Linux(ext2)! I need a program or method for doing it.
If transfer of files is not too frequent then a FAT partition could help b/c both NTFS and ext2 can read/write to FAT.
Farhan Noor Qureshi
|
|
|
|
|
Hi,
Can anyone tell if there is any software to create symbolic link for driver files in windows.
Thanks in Advance
Kenny
|
|
|
|
|
I dint get ur question.We can create symbolic link only inside the driver code.In our AddDevice Routine normally we do that using IOCreateSymbolicLink.To know more about this see DDK documentation.
But for viewing the symbolic links available in ur system u can use tools Like WinObj,DevView or ObjView.This u can get from sysinternals.com or oneysoft.com.
If u can give some more explanation on ur need i can try more.
regards
Vairavan
System software Engineer
TCS
|
|
|
|
|
Hi,
I have created a Device Independent Driver Code. It is working perfectly. All i need is a Application Launcher program. And that is where my problem starts. I am trying to create the file using the CreateFile Command. And it is always returning false. I have attached the code snippet below. Anyone who knows how to solve the problem please help me.
HANDLE OpenDeviceDriver(LPCTSTR szDriverName)
{
HANDLE hDevice;
TCHAR szFullName[200];
wsprintf(szFullName, "\\\\.\\%s", szDriverName);
hDevice = CreateFile (szFullName,
0,
FILE_SHARE_READ | FILE_SHARE_WRITE,
NULL,
OPEN_EXISTING,
FILE_ATTRIBUTE_NORMAL,
NULL
);
if(hDevice == INVALID_HANDLE_VALUE)
{
hDevice = 0;
printf("%x Error %ld\n",hDevice,GetLastError());
}
return hDevice;
}
With Warm Regards
Kenny
|
|
|
|
|
What's the return value from GetLastError() ?
Alcohol. The cause of, and the solution to, all of life's problems - Homer Simpson
|
|
|
|
|
The result of GetLastError() is 2
|
|
|
|
|
Means The file is not there in the specified path.I want to know what u or passing to szDriverName.
regards
Vairavan
-- modified at 0:52 Friday 1st September, 2006
|
|
|
|
|
I want use the c#.net or another languages for listenning to port 80/8080 and diagnose type of the receives files .
please help me .
thanks .
computer
|
|
|
|
|
m_mor wrote: port 80/8080
Which port? 
(In case you didn't realise the sarcasm, what type of port? I'm assuming TCP/IP here)
Formula 1 - Short for "F1 Racing" - named after the standard "help" key in Windows, it's a sport where participants desperately search through software help files trying to find actual documentation. It's tedious and somewhat cruel, most matches ending in a draw as no participant is able to find anything helpful. - Shog9
Ed
|
|
|
|
|
my machine (2.6 GHz celeron on an asus m/b) has just started locking up. after a few fruitless reboots i thought that the cpu might be overheating despite the lack of warning beeps and such like. i went into the hardware monitoring part of the bios and found that the all except the 12V rail were operating at about a volt too high. ie the 3.3V rail was at 4.3V and so on. and the fan RPM was not being displayed or the CPU/case temperatures. but if i moved the selection up and down, sometimes the voltages would right themselves and all the other settings would then display correctly. for a while, and then it would jump up again.
i figure that either it's a power supply problem or a m/b problem :->. but before i start trying to locate (or have to buy) a replacement power supply, has anyone else experienced this and what was the solution? ps. i'm not made of money 
|
|
|
|
|
As for the Power Supply:
You can test the PS, but the results might not be the same as if the PS was under load:
Remove the PS from your computer. Disconnect all cables. Take the Mainboard-Connector. It should have 20 pins in total (if it does not, you will have to check the manual for the pin layout). Short Pin 4 to Ground with a piece of wire.
How to find pin 4: the pins are numbered from top to bottom in a row-first manner. The top is the part with the plastic hook. Example:
[code]
|-----|
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
[/code]
If shorted this way, the PS should start running.
Then try an measure the voltages (try formfactor or wikipedia for the appropiate pins).
IMPORTANT:
This is just my experience. I do take any responsibility for any damages caused to you or your equipment when following these instructions. If you do not know how to behave around electricity, DO NOT TRY THIS.
As for the MB:
Visually check the capacitors on your MB. They have a (usually) cross-shaped predetermined breaking point on their cap. The top of the cap should be flat. If it is deformed or broken, it is likely that they reached the end of their lifespan. In that case, you could either try and replace them with new ones (see IMPORTANT note above) or buy a new MB.
Cheers,
Sebastian
--
Contra vim mortem non est medicamen in hortem.
|
|
|
|
|
Sebastian Schneider wrote: The top of the cap should be flat. If it is deformed or broken, it is likely that they reached the end of their lifespan.
This is called Capacitor Plague and is NOT normal. See this[^] for more info. It's quite the interesting read and why I'm replacing about 1 motherboard a week where I work.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
Actually, this also happens with capacitors manufactured by well-known companies with an intact QA-department.
You can call this a case of capacitor plague ONLY if the capacitors fail spectacularly and prematurely. Since the capacitors contain an electrolyte and are rated for a specific MTBF at a given temperature, they can break if they are used outside their specified temperature window. If the capacitor is rated for 10 years at 30°C, it might well fail after 5 years in 35° or 2 years in 40°, depending on the specifications used by the manufacturer.
The drop in lifespan is quite dramatic for a small increase in temperature, and the result can also involve ruptures at the predetermined breaking point when all the electrolyte is gone. This does not necessarily mean that the capacitor was badly made, but just that it was not designed to operate under this conditions.
-- modified at 6:50 Thursday 17th August, 2006
Cheers,
Sebastian
--
Contra vim mortem non est medicamen in hortem.
|
|
|
|
|
I want to use Visual C++ for control hardware via RS232 or USB port.
Anyone know what is the good book or website which I can get the infomation about this issue.
|
|
|
|
|
Max++ wrote: website which I can get the infomation about this issue.
Google, AFAIK there are not many dedicated sites. The MSDN Library has a good article on reading and writing data to and from the COM ports (sorry can't remember the title). Most USB drivers come with something that will allow the USB port to look like an RS232 port with a higher baud rate. So generally all you need to know is how to read and write data to and from RS232 ports.
Regarding actually controlling the hardware you'll have to provide more information.
Formula 1 - Short for "F1 Racing" - named after the standard "help" key in Windows, it's a sport where participants desperately search through software help files trying to find actual documentation. It's tedious and somewhat cruel, most matches ending in a draw as no participant is able to find anything helpful. - Shog9
Ed
|
|
|
|
|
Can u give some more info reg ur requirements?.If u want to control ur hardware with RS232/USB u need to create handle to ur device then u can do read/write to ur device.For that u should know the command formats supported by ur device.Is it a printer/storage/camera or any thing else?.
If u give give more details i will be able to provide more info.
regards
Vairavan
|
|
|
|
|
Was that intended for me or for the thread-starter?
Formula 1 - Short for "F1 Racing" - named after the standard "help" key in Windows, it's a sport where participants desperately search through software help files trying to find actual documentation. It's tedious and somewhat cruel, most matches ending in a draw as no participant is able to find anything helpful. - Shog9
Ed
|
|
|
|
|
Sorry,Its intended for thread starter.
regards
Vairavan
|
|
|
|
|
I have several programs on the go, which ultimately need to interface with Hardware at a very basic level. e.g.:
A Salescounter Program, which needs to open the Cash Drawer, and monitor it's closure.
A Laundrette Program, (NOT DRYCLEANERS) in which each Washing Machine is monitored by a thread, and, in which each thread needs one Analogue input(16 Bit), and about 8 Digital channels in and 8 Digital channels Out.
I am not at this stage puting a Limit on the Number of Computers required, but, am thinking along the following line:-
One Computer per Sales Point(each Needs to Control a Cash Drawer)
One Computer to Drive the Interface cards to drive the washing machines.
What Off the Shelf hardware(And Firmware and Software) is available to implement this!
LateNightsInNewry
|
|
|
|
|
Well, you can buy USB analogue/digital I/O components, but bear in mind that typically they have a ~20ms delay on processing commands (eg writing takes 20ms, reading another 20ms).
In terms of firmware/software, you're pretty much on your own; you get a DLL and/or device driver to allow you to configure the I/O and read/write it, and that's it, although generally speaking you can then use them from any C/C++/VB app.
Are you looking at cash drawers as well? AFAICR, these are available off the shelf, with an input to force an 'open' and an output to report the 'closed' state.
Integrating all these won't necessarily be pretty, and you may find that there are limits on how many devices you can use from a single PC. I've used a small Velleman kit for USB I/O (which has fewer I/O lines), for example, and you can only connect 4 such devices on the USB bus, even going via a powered hub.
Steve S
Developer for hire
|
|
|
|
|
Thanks steve.
The question is where, from whom,at what price! I would accept the 50 ms delay,(Ido not think that staff would notice that the delay between hitting the Chash Button, and the drawer opening) and Four Cashdrawers per terminal suounds fine. I've given up on USB for apps like this, because the development in this are seems to concentrate on speed! I could give you thousands of development applications for anyone who would develop a USB unit, which could switch say 100 relays, with a delay of say 500 ms quite acceptable! Most real world applications, like switching of the Air Conditioning, do not require split second timing!
Where are Cash Drawer boards and API's to run same available off the shelf?
Names, Addresses,Costs
Many thanks for your support
Regards
LateNightsInNewry
|
|
|
|
|
Well, last time a company I know needed one, they did a google on 'USB digital I/O' and then it was a case of price shopping. With the advent of stuff like small microcontrollers with USB built-in, they are becoming more widely available. The Velleman ones I have (which have fewer I/O lines, I think 5 in and 8 out, but does have analogue too) I bought from Maplin Electronics, who periodically put them on sale prices (in both kit and prebuilt forms). Don't know if they operate in Ireland, though, but there ought to be an equivalent.
Some of the more expensive stuff includes optoisolators etc to stop any 'accidents' from frying USB host controllers in the PC etc. I prefer USB because it makes it easier to demo stuff from a laptop, which you can't exactly plug cards into 
OTOH, it does limit the number of lines, but being able to plug in more than one device can help make up for it.
Don't know about cash drawers, but again, google should be able to help, just a question of finding the right buzzwords (cash/terminal/drawer/POS etc). There is a company I did some Win32 training for in Otley, W.Yorks; they make POS stuff (called, amazingly enough, Point of Sale Systems), but that was a while back. They might know, so I'll see what I can find out...
Steve S
Developer for hire
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
