|
I am using a log-bin file on each of the Servers and Each Server is a Slave of the Previous Server with the Last One in the Chain is the the Sever for the Save Number 1. any Topology will be fine as long as all the data is the same in all the Servers at the end of the day.
|
|
|
|
|
Hi,
I have a stored procedure which firstly inserts a record into a table and then uses a cursor to update all the records in the table (there is a field called sequence, which specifies the order that the records are retrived, that needs to be updating).
The problem I seem to have is that the cursor updates all the records except for the one that has been newly inserted. Although my Insert statement comes before the cursor, it seems as though the record is being inserted after the cursor has finished.
Any ideas anyone?
(I am using SQL Server 2005)
|
|
|
|
|
If you could post the code, it would greately help.
Perhaps you open the cursor before the insert statement or yu have where condition which eliminates the inserted row.
Another thing, I believe it would be much better, in terms of speed, if you would do the updating without cursors. Perhaps the cursor operation could be transformed to a set based update statemnt.
|
|
|
|
|
Thanks for your time.
I understand what you're saying about cursors being a performance hog, but there are going to be at most 30 records in this table so I didn't think using a cursor would have too much of an impact. Am I wrong in thinkign this?
Anyway, here is my procedure:
ALTER PROCEDURE [dbo].[spReportTabINSERT]
-- Add the parameters for the stored procedure here
@prmName as varchar(30),
@prmSequence as int
AS
BEGIN
SET NOCOUNT ON;
INSERT INTO
tblReportTabs
(
[name],
[Sequence]
)
VALUES
(
@prmName,
@prmSequence
)
-- update all sequences
DECLARE @ID uniqueidentifier
DECLARE @Sequence int
DECLARE @NewSequence int
SET @NewSequence = 10
DECLARE crsTabs CURSOR
FOR
SELECT
tblReportTabs.[ID],
tblReportTabs.[Sequence]
FROM
tblReportTabs
ORDER BY
tblReportTabs.[Sequence]
OPEN crsTabs
FETCH NEXT FROM crsTabs INTO @ID, @Sequence
WHILE @@FETCH_STATUS = 0
BEGIN
UPDATE
tblReportTabs
SET
tblReportTabs.[Sequence] = @NewSequence
WHERE
tblReportTabs.[ID] = @ID
SET @NewSequence = @NewSequence + 10
FETCH NEXT FROM crsTabs
END
END
CLOSE crsTabs
DEALLOCATE crsTabs
|
|
|
|
|
The first observation is that in the end of the loop, you should have:
FETCH NEXT FROM crsTabs INTO @ID, @Sequence
instead of
FETCH NEXT FROM crsTabs
|
|
|
|
|
Great, fixed!! School boy error aye?!
Thanks a lot 
|
|
|
|
|
No problem.
Liqz wrote: School boy error aye
It happens to everyone
Another thing, I didn't quite get the logic in your loop. You fetched the sequence but you didn't use it anywhere, was that intentional?
|
|
|
|
|
Again, you're right. I am updating the sequence with @NewSequence, but of course, I do not need to fetch it in order to do this. I will amend it.
Thanks again
|
|
|
|
|
You're welcome
|
|
|
|
|
I must be off my rocker but I can't see why you are using a cursor for this logic.
Need software developed? Offering C# development all over the United States, ERL GLOBAL, Inc is the only call you will have to make.
If you don't ask questions the answers won't stand in your way.
Most of this sig is for Google, not ego.
|
|
|
|
|
Because I need to loop through each record in a table and update a field based on an incrementing integer.
I'm failry new to all this so if you have any other ideas then I'm all ears!
|
|
|
|
|
Well autonumbers are the way to do incrementing integers in Sql Server and sequences in Oracle (look-up either SCOPE_IDENTITY() or sequence NextVal depending on your poison of choice)
However, to get your code to work it seems to me:
1) Begin Transaction
2) Insert
3) UPDATE set sequence = sequence + 10 WHERE sequence > @sequence
4) UPDATE set sequence = sequence + 10 where id = @id
5) COMMIT
CURSORS are evil and should be avoided.
Need software developed? Offering C# development all over the United States, ERL GLOBAL, Inc is the only call you will have to make.
If you don't ask questions the answers won't stand in your way.
Most of this sig is for Google, not ego.
|
|
|
|
|
Thanks for your response. I understand your concern about cursors but unfortunately I don't think your idea is going to work. The reason is because the insert statement is inserting a record with a sequence which isn't a multiple of 10, i.e. 15, 25, 35 etc. This then means that the newly inserted record is in the right place accoring to sequence number. The cursor then gets all the records ordered by sequence, and updates them back to numbers divisible by 10, including the newly inserted record (obviously, the sequence doesn't have to be multiples of 10, it could of easily have been 2, but still).
Again, I realise that cursors are not a good idea but I don't see any other way around it (other than doing it from my VB.NET application with multiple database calls which definately isn't a good idea). Also, there are going to be at most 30 records in this table so I thought that using a cursor wouldn't be too much of a problem.
Like I said, I am fairly new to this so any other suggestions you may have are welcomed.
|
|
|
|
|
I highly recommend you reevaluate your logic in your application and database. I think you will find the answer should come to you. While I do not know what you are doing, I have a pretty good idea.
Need software developed? Offering C# development all over the United States, ERL GLOBAL, Inc is the only call you will have to make.
If you don't ask questions the answers won't stand in your way.
Most of this sig is for Google, not ego.
|
|
|
|
|
Ok Thanks. I have just looked at your example again and now understand a little more where you're coming from and i think that it would acually work for my insert statement by changing one of the lines from
UPDATE set sequence = sequence + 10 where id = @id
to
UPDATE set sequence = sequence + 5 where id = @id
which is great and I will use this, thanks
But I have a similar stored procedure for doing an update on an existing record, that is, updating the sequence of one of the records already in the table. Maybe I will look into my logic further for this too.
Thanks again
|
|
|
|
|
I understood that you're trying to do ordering. For example you have ordinals 1,2,3,4 and 5 then you add a new record which has the ordinal 3 so old ordinals 3,4 and 5 will be replaced with 4,5 and 6 respectively. If that's the case, you could simply:
- update all rows, set ordinal = ordinal + 1 where ordinal >= 3
- insert the new row with ordinal 3
|
|
|
|
|
That is actually a good and very simple idea too, why didn't I think of that!
Will try that when I get to work tomorrow!
Thanks
|
|
|
|
|
|
This works great when inserting a new record and then updating each sequence but not when changing an existing record's sequence and then updating all the other sequences. But, with my new found knowledge, I'm sure that I'll work it out!
Thanks again all for your help.
|
|
|
|
|
Liqz wrote: , with my new found knowledge, I'm sure that I'll work it out!
I'm confident that you will
Liqz wrote: Thanks again all for your help
No problem.
|
|
|
|
|
hi,
i think you need to create a transaction for insert and then commit, there after you retrieve and update.
reagrds
modified on Thursday, January 22, 2009 5:49 AM
|
|
|
|
|
Yes, I thought this also and did try it but it didn't seem to work. Maybe I coded it incorrectly. I will try again!
Thanks for your help
|
|
|
|
|
Hi all
How do i read html content into a sql server report. Or if possible may you please help me with links on where to do this.
Thank you.
|
|
|
|
|
good morning sir/madam,
iam working on app in vb6.0 with msaccess ihave to convert that in oracle db..
here i have msaccess select statement..in which i am autogenerating codenumber..here iam trying to convert to oracle format..
but iam receiving Error:invalid relational operator
rsDetail.Open "SELECT max(to_number(cnor_cnee_id,3,13)) FROM cnor_cnee_master where (cnor_cnee_id,1,2)=" & intBranchPrefix, DBConnection, adOpenStatic, adLockReadOnly
so please suggest the require corrections...
thanx inadvance..
prem...
|
|
|
|
|
premprakashbhati wrote: where (cnor_cnee_id,1,2)=" & intBranchPrefix
What is the condition you're trying use? Field cnor_cnee_id should be what?
premprakashbhati wrote: max(to_number(cnor_cnee_id,3,13))
Also what do you want to do with cnor_cnee_id here?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
