|
Max value for INT data type is 2147483647
Use BIGINT as the value you are trying to convert is more than the max value of INT
Regards
KP
|
|
|
|
|
It is clear, but if i'm still needed to convert bigest value to more easy, is an way exists???
|
|
|
|
|
In SQL there are INT & BINT data types
currently you are using INT
instead user BIGINT
Regards
KP
|
|
|
|
|
hai ,
i got count(Empid) from one viewtbl and count(dept) from another table in one storedprocedure,
i want the percentage of count(Empid) and count(dept)
Thanks in advance
Thanks
Subbu.
|
|
|
|
|
 How is this different than the question you asked just several hours earlier, that Pete already answered? Unless this is an entirely different question, you'd probably be better off continuing the thread you already started.
Sorry if it's obvious to everyone else... 
David
---------
Empirical studies indicate that 20% of the people drink 80% of the beer. With C++ developers, the rule is that 80% of the developers understand at most 20% of the language. It is not the same 20% for different people, so don't count on them to understand each other's code.
http://yosefk.com/c++fqa/picture.html#fqa-6.6
---------
|
|
|
|
|
I'm starting a new project next year (business application)
I will be the only one working on it from a start,
but my SQL knowledge is limited (not the SQL syntax, but the database design)
Until now I've sorted my problems on the way, but that's not a long term solution that I'm looking for,
so can anyone point me to some good articles (or books in e-book format as I live in a country with limited book availability)
Thanks in advance
|
|
|
|
|
progress-database-design-guide/[^]
en.wikipedia.org/wiki/Database_design
www.databasedesign-resource.com
well u should consider getting urself acquianted with basic db design principles and normalization (uptp 3NF atleast).
wikipedia can also be helpful for u and Google offcourse is also there to help u out.
Hope that helps u
best of luck
Rocky
You can't climb up a ladder with your hands in your pockets.
|
|
|
|
|
I've only been in database design a few years, and have learned a lot of things the hard way. But I'm sure there a lot of other things I haven't learned yet, or am *about to* learn them the hard way.
The link you provided, Rocky# wrote: progress-database-design-guide/[^]
says in one place:
"primary keys with business meaning as well as composite keys are a bad idea."
This I did not know, and even now am not convinced of. I have tended to make my designs exactly the opposite. Let me give an example of a table I recently designed.
CREATE TABLE tblScheduledInventory(
asofDate SMALLINT -- number of days since Jan 1, 2000
, partsGroupID SMALLINT -- REFERENCES tblPartsGroups
, locationID SMALLINT -- REFERENCES tblLocations
, statusCode SMALLINT -- "installed", "spare", etc.
, inventoryTypeID SMALLINT -- "active", "in-reserve", etc.
, CONSTRAINT pkScheduledInventory PRIMARY KEY
(asofDate,partsGroupID,locationID,statusCode,inventoryTypeID)
, cnt INT
);
I need the five fields within the PK to be compositely unique. In addition to that, I KNOW that during use of this table, the records are going to be "marched-thru" in a date-order, and for each date, the records will be traversed in a parts-grouping order. Therefore, I WANT the clustered index (the actual ordering of records within storage) to be by asofDate, then by partsGroupID. This should produce faster queries since all the records of interest will be clustered near one another, and not scattered all over the hard-drive. The only way to achieve this (that I know of) is to make the primary key a composite index of the items that need to be unique, with the most important item being first in the list.
Perhaps someone could shed some light on *why* this might be a bad design practice. Examples would really help me understand.
BTW, in other readings I've discovered there are alternate opinions regarding this point. Some say the way I do it is OK.
David
---------
Empirical studies indicate that 20% of the people drink 80% of the beer. With C++ developers, the rule is that 80% of the developers understand at most 20% of the language. It is not the same 20% for different people, so don't count on them to understand each other's code.
http://yosefk.com/c++fqa/picture.html#fqa-6.6
---------
|
|
|
|
|
thanks for ur response David its really nice!
and uknow I believe in one thing: "Rules always have exceptions"... Generally they do say n its true to quite some extent that one should avoid making unnecessary composite PKs when a single attribute PK shud do. Well actually the thing is that having unnecessary composite PKs can make ur design vulnerable to having some anomalies u know it can fail satisfy 2nf. But still it all depends on ur particular scenario bcz in a way ur scenario can be peculiar to many.
I think ur idea there is quite intelligent and looks quite good to me mate!
Rocky
You can't climb up a ladder with your hands in your pockets.
|
|
|
|
|
Thank you for your help 
I've been quite new into this - and since I've lost my mentor, any help is more than welcome.
|
|
|
|
|
ur welcome mate!
someday every buddy has to become a mentor himself.
Rocky
You can't climb up a ladder with your hands in your pockets.
|
|
|
|
|
sorry if in the wrong Forum, but I have a question about creating an Access form that works off of 2 tables.
Here is what I have:
tbl_Inventory: RecID, Name, Date, PartNo, Description<br />
tbl_Defects: RecID*, DefectType (RecID* matches RecID in tbl_Inventory)<br />
tbl_DefectTypes: ID, Descriptive_Value<br />
I then have a form where a user can manually enter the values to fill tbl_Inventory. ONE of those fields asks for Defect Type (a combo pulldown control). This form works with tbl_Inventory and tbl_Defects. When there is a defect, tbl_Defects gets the RecID from tbl_Inventory and assigns Defect Type (mechanical, operator, obsolete)
How do I establish my form's (Record) Source? Do I use both tbl_Inventory and tbl_Defects? tbl_Inventory actually has 23 fields and when I tried to use the SQL builder for Record Source of the form, I ran out of "space" (columns) for all my fields.
Any where I can look to get a quick tutorial on using more than one table as the source for ONE form and have the two tables synched when I update in the form?
Much thanks to this newbie Access developer. 
Johnny
|
|
|
|
|
You can use use a query as the source for one form.
|
|
|
|
|
Thanks! Will try that. There was something amiss the first time I tried using the SQL builder (?) as noted in my comment about more fields than columns. Will roll my own SQL statement and should be good.
Thanks again.
Johnny
|
|
|
|
|
I'm using VS 2005 and have installed SQL Server Express Edition also. The documnentation says that I can add a database to an open project by going to the Project / Add New Item menu command and selecting the Database object from the list of templates. That would be nice if it was there. My list has things like Stored Proc, Triggers, Datasets, etc. All sorts of things that would be part of a database, but not a database itself. How do I add/connect to a local SQL Server Express database? Thanks.
|
|
|
|
|
is there a way to create an ado query with multiple data sources? i want tojoin three queries and take those results and insertt it into a fourth? thanks.
|
|
|
|
|
No. However, if you are using SQL Server you can set up linked servers to other data sources e.g. Oracle, Access, Excel and write queries that link objects in the linked servers to native SQL Server objects.
Paul Marfleet
"No, his mind is not for rent
To any God or government"
Tom Sawyer - Rush
|
|
|
|
|
I am using SSRS 2005. Trying to connect reportserver remotely. and trying to fetch reports and collect on a treeview. But getting following error. This works fine, when the web server & sql server are on the same system. I mean works fine locally. Please help me.
Error::
System.Web.Services.Protocols.SoapException: The item '/Sajan Reports' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/Sajan Reports' cannot be found.
at Microsoft.ReportingServices.Library.ListChildrenAction.PerformActionNow()
at Microsoft.ReportingServices.Library.RSSoapAction.Execute()
at Microsoft.ReportingServices.WebServer.ReportingService2005.ListChildren(String Item, Boolean Recursive, CatalogItem[]& CatalogItems)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WebServer.ReportingService2005.ListChildren(String Item, Boolean Recursive, CatalogItem[]& CatalogItems)
Source codes
Global.asax.cs
**************
using System;
using System.Data;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Web.Services.Protocols;
using Microsoft.ReportingServices.Library.Soap2005;
///
/// Summary description for Global
///
public class Global : System.Web.HttpApplication
{
public void Application_Start(object sender, EventArgs e)
{
// Code that runs on application startup
}
public void Application_End(object sender, EventArgs e)
{
// Code that runs on application startup
}
public void Session_Start(object sender, EventArgs e)
{
// Code that runs on application startup
Session["Uid"] = "";
}
public void Session_End(object sender, EventArgs e)
{
// Code that runs when a session ends.
}
// Report Server defines the URL to root of the
// Reporting Services home page.
public static string ReportServer
{
get { return "http://10.10.40.2/reportserver"; }
}
// ReportPath, when appended to the ReportServer property,
// will define the root of the report search.
// For example, to view all available reports on the report
// server, use "/" as the ReportPath. Setting the value to
// "/MyDemoReports", would only show reports and subdirectories
// under http://ReportServer/MyDemoReports.
public static string ReportPath
{
get { return "/Sajan Reports"; }
}
// There are a couple places where we need to do string
// manipulation to add and remove path seperators -
// sometimes the seperator needs to be passed as an array
// of char, othertimes as a string. These two properties
// simply define both so the code is a little cleaner
// when we do the string munging.
public static char[] PathSeparatorArray
{
get { return pathSeparatorArray; }
}
public static string PathSeparatorString
{
get { return pathSeparatorString; }
}
protected static char pathSeparator = '/';
protected static char[] pathSeparatorArray = { pathSeparator };
protected static string pathSeparatorString = new string(pathSeparator, 1);
}
RenderReport.aspx.cs
*********************
using System;
using System.Data;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
public partial class RenderReport : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
if (!Page.IsPostBack)
{
ReportViewer1.ServerReport.ReportServerUrl = new Uri ("http://10.10.40.2/reportserver");
ReportViewer1.ServerReport.ReportPath = Global.ReportPath + Request["Path"];
}
}
}
Fetching and collecting on treeview with the following code
***********************************************************
rService.Credentials = System.Net.CredentialCache.DefaultCredentials;
catalogItems = rService.ListChildren(Global.ReportServer, true);
TreeView_Reports.Nodes.Clear();
RadTreeNode node16 = new RadTreeNode();
node16.Text = "Report";
TreeView_Reports.Nodes.Add(node16);
TreeView_Reports1(TreeView_Reports, node16, catalogItems);
|
|
|
|
|
From the error message, it looks like the ServerReport.ReportPath property has been set with the report name missing. Is the value of Request["Path"] correct?
Paul Marfleet
"No, his mind is not for rent
To any God or government"
Tom Sawyer - Rush
|
|
|
|
|
ServerReport.ReportPath is given in RenderReport.aspx page. Error is comming with ReportPath in the second line of the following code which is the next step:
Is there any settings with using namespaces, missing .dlls or missing web reference. Please help me.
Fetching and collecting on treeview with the following code
*****************************************************************
rService.Credentials = new NetworkCredential("administrator", "password@sajan");
catalogItems = rService.ListChildren(Global.ReportPath,true);
TreeView_Reports.Nodes.Clear();
RadTreeNode node16 = new RadTreeNode();
node16.Text = "Report";
TreeView_Reports.Nodes.Add(node16);
TreeView_Reports1(TreeView_Reports, node16, catalogItems);
After changing report path in Global.asax from get { return "/Sajan Reports"; } to get { return "/"; }
I am getting following error. Can you please help me.
Error:
System.Web.Services.Protocols.SoapException: The permissions granted to user 'MANOJ-SAJAN\IUSR_MANOJ-SAJAN' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'MANOJ-SAJAN\IUSR_MANOJ-SAJAN' are insufficient for performing this operation.
at Microsoft.ReportingServices.Library.ListChildrenAction.PerformActionNow()
at Microsoft.ReportingServices.Library.RSSoapAction.Execute()
at Microsoft.ReportingServices.WebServer.ReportingService2005.ListChildren(String Item, Boolean Recursive, CatalogItem[]& CatalogItems)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WebServer.ReportingService2005.ListChildren(String Item, Boolean Recursive, CatalogItem[]& CatalogItems)
-- modified at 5:47 Friday 16th November, 2007
|
|
|
|
|
The following code is not working. This will make the tree. The following code line is not working. This should retrieve no. of reports from report server and put in array, catalogItems. Based on the number of reports the another loop will retrieve names of the reports and will populate the tree view.
catalogItems = rService.ListChildren(Global.ReportPath,true);
Help me please.
-- modified at 7:33 Monday 19th November, 2007
|
|
|
|
|
Hi,
I have a price, and I am a bit confused as to what the data type must be, what's best? I'm running SQL Server 2005.
Thanks
Brendan
|
|
|
|
|
|
hai all,
i had write one storedProcedure,i that i got two fields(columns).
i just want to know about how to find the %(percentage) of the two columnn(fields).
Thanks in advance
Subbu
Thanks
Subbu.
|
|
|
|
|
If you want to get the percentage of column1 against column2, and you have them stored as integers, then you need to force a cast on them so that they can be divided.
select cast(col1 as decimal(10,2)) / cast(col2 as decimal(10,2)) * 100
from table_1
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
