|
Pete O'Hanlon wrote: This[^] article might help. It's from this[^] book.
The drawback to that approach is that it requires creating an inherited application class for each application you want to single-instance, whereas the first method suggested above doesn't have that issue.
For most this probably isn't a problem; I had a large project with several executables though and found that to be an issue.
It has become appallingly obvious that our technology has exceeded our humanity. - Albert Einstein
|
|
|
|
|
Patrick Sears wrote: The drawback to that approach is that it requires creating an inherited application class for each application you want to single-instance, whereas the first method suggested above doesn't have that issue.
You're right of course, but as the OP only stated this was for one application then I didn't see this as an issue. BTW - with the judicious use of generics, you can get around the inherited application class problem. There are ways to do this without having too much fuss, it just requires a little bit of extra work in the design phase.
|
|
|
|
|
|
No. You might want to look around on amazon's developer site for a forum there.
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
|
|
|
|
|
Dear All.
When I publish an application, there are 2 root folders created something like
the first one
...\Apps\2.0\N2NJKNK\JHKJ7897KJ\appl..tion_ace7blkjnjn_0100.0000_534535 - where my app.exe file stored
and the second one
...\Apps\2.0\N2NJKNK\JHKJ7897KJ\appl..exe_ace7blkjnjn_0100.0000_7689767 -
where my resource files stored (some.exe, data.sdf)
So to access to my resource (eg data.sdf) I have to do like that:
"..\\appl..exe_ace7blkjnjn_0100.0000_7689767\\data.sdf"
The question: is there any proper way to get to that "...\appl..exe_..." folder
modified on Friday, December 28, 2007 9:32:45 AM
|
|
|
|
|
The solution is to use Application.UserAppDataPath instead of Application.StartupPath
internal sealed partial class Settings {<br />
<br />
public Settings() {<br />
this.SettingsLoaded += new System.Configuration.SettingsLoadedEventHandler(Settings_SettingsLoaded);<br />
}<br />
<br />
void Settings_SettingsLoaded( object sender, System.Configuration.SettingsLoadedEventArgs e ) {<br />
String dataDirectory;<br />
if (( AppDomain.CurrentDomain.DomainManager != null ) && AppDomain.CurrentDomain.DomainManager.ToString().Contains("VSHost")) {<br />
dataDirectory = Application.StartupPath;<br />
}<br />
else {<br />
dataDirectory = <big>Application.UserAppDataPath</big>;<br />
}<br />
this["test1ConnectionString"] = Settings.Default.test1ConnectionString.Replace(".\\", dataDirectory + "\\");
}
Thanks to http://blogs.msdn.com/smartclientdata/archive/2005/07/15/439008.aspx[^]
|
|
|
|
|
I'm not familiar with crystal report. So I ask the stupid question.
I know we can use crystal report in Java. We can also use crystal report in .NET framework.
Question NO.1
So is crystal report a work of some company's?
Or crystal report is a protocol, an interface?
Question NO.2
Is there a crystal report for C++? (not managed C++)
It's very kind of you if you answer my question to clear my mind.
|
|
|
|
|
|
I'm sorry, why can't I open this web?
|
|
|
|
|
fantasy1215 wrote: is crystal report a work of some company's?
Yes. The people who created it 
"The clue train passed his station without stopping." - John Simmons / outlaw programmer
|
|
|
|
|
Hi all,
Can Any one suggest me how to Paint (Flicker Free Drawing)at forms Non Client area.
Thanx In Advance
Nagraj
modified on Friday, December 28, 2007 7:10:37 AM
|
|
|
|
|
Probably through some kind of double buffering on the area you want to paint.
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
|
|
|
|
|
Hi All,
Does anyone knows how to connect to multiple dynamic endpoints from a WCF Client?
I cant use svcutil.exe to generate proxy.cs because the
services are only exposed during runtime. I did some research on ChannelFactory, but dont seems to get what i want.
Any Help with be appreciated.
Thanks in advance.
|
|
|
|
|
Hello,
I am very exited about the new namespace in .NET 3.5, System.Net.PeerToPeer. Can someone please post some sample code (preferably in C#). I have never written a p2p application before.
|
|
|
|
|
|
Have you looked on msdn?
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
|
|
|
|
|
Hi all ,
I have a .Net Application that is going to be used in a workgroup environment , I installed the app on the server machine and the suftware runs successfully and connects to sql server with no problem , I also installed prerequisites such as .Net framework 2.0 on lient computer and shared the app folder which is located on server machine . on client machine , When I want to run the app from UNC FileShare I get fatal error that asks to send error to microsoft , but when I copy the entire folder from UNC FileShare to local client , the app connects to server successfully and user can work with software. What's is the problem in your opinion?
Note : I also made the shared folder FullControl and also adjusted Entire Zone in Microsoft .Net Framework 2.0 Configuration to FullTrust(On Server machine) , What causes this problem you think?
Thanks in advance (Emergency!)
|
|
|
|
|
It's called "Code Access Security". Any code running from a non-local (i.e.: Shared folder or other network source) is NOT trusted by default. You have to tell the .NET CLR to trust the code comming from a certain source.
Read this[^] post and follow the three links in it.
|
|
|
|
|
Thanks But ,
I had made entire zone(My Computer,Local Interanet , Untrusted sites,Internet , Trusted Sites) to FullTrust and also Code Access Security for All_Code of Enterprise,Machine and User Level to FullTrust before ,
Note : I don't get security exception , I receive the following error :
" myAppName has ecountered a problem and needs to close , sorry for inconvenience ....."
modified on Thursday, December 27, 2007 12:53:19 AM
|
|
|
|
|
Hi,
I just started playing around with the 3D functionalities in WPF and have a problem now:
I have a ViewPort3D to which I added a cube. To one side of this cube I have applied a material like this:
MeshGeometry3D plane = new MeshGeometry3D();
Point3DCollection points = new Point3DCollection();
points.Add(new Point3D(p1X, p1Y, p1Z));
points.Add(new Point3D(p2X, p2Y, p2Z));
points.Add(new Point3D(p3X, p3Y, p3Z));
points.Add(new Point3D(p4X, p4Y, p4Z));
plane.Positions = points;
Int32Collection indices = new Int32Collection();
indices.Add(0);
indices.Add(1);
indices.Add(2);
indices.Add(0);
indices.Add(2);
indices.Add(3);
plane.TriangleIndices = indices;
PointCollection texturePoints = new PointCollection();
texturePoints.Add(new Point(0, 0));
texturePoints.Add(new Point(0, 1));
texturePoints.Add(new Point(1, 1));
texturePoints.Add(new Point(1, 0));
plane.TextureCoordinates = texturePoints;
ImageBrush brush = new ImageBrush();
brush.ImageSource = new BitmapImage(new Uri(@"C:\test1.jpg"));
DiffuseMaterial material = new DiffuseMaterial(brush);
GeometryModel3D result = new GeometryModel3D(plane, material);
Everything work fine with "small" images. I have a supa dupa cube with a clear texture. But if I use images where the width or height has more than 2000 pixels than I see a weird tiled result on my cube. Has anyone here had any problems with large images in 3D WPF? Any hints are appreciated.
Robert
|
|
|
|
|
Hi,
how do I change the Registry-Key permissons from my own tool?
Under Vista the Key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing is owned by the trusted installer and so also Administrators only have read permissions. But I must write into the Key. So, how do I change the permissions for the admin group to full access?
Is there a function to do this?
thx
André
'A programmer is just a tool which converts caffeine into code'
|
|
|
|
|
There are no managed code functions that can do this. You could do this by using some interop to the native API's, but I don't recommend it. Why do you need to write to this key any time other than at install time? If you just need to store run-time information, there are other registry keys that your application has access to that you should be using instead. If you actually need to change this key, you need to learn how to do it the correct way and play properly within the permissions by using a manifest file for your application and splitting that feature out into a separate module (application) that can run with elevated privileges or make your entire application require elevated privs to run (not recommended as well).
|
|
|
|
|
Hi Scott,
Scott Dorman wrote: Why do you need to write to this key any time other than at install time?
Sorry can't talk about it, but I must add a key into this folder.
What are the Win32 API functions to change the permissions?
André
'A programmer is just a tool which converts caffeine into code'
|
|
|
|
|
You can try these articles for more information:
http://blogs.msdn.com/asanto/archive/2006/01/22/516009.aspx[^]
http://www.thescripts.com/forum/thread259111.html[^]
However, you are still probably better off doing this the "right" way and either doing this only at install time, or write the application following the Vista security rules (using application manifests, etc.) If you must do this, you will need to either run the application with admin privileges or launch a separate elevated process (application) that manipulates this key in response to the user clicking a button, etc. that will prompt for credentials. You might also be able to get around this by running in XP Compatability mode, but that's just a workaround.
Scott.
—In just two days, tomorrow will be yesterday.
—Hey, hey, hey. Don't be mean. We don't have to be mean because, remember, no matter where you go, there you are. - Buckaroo Banzai
[ Forum Guidelines] [ Articles] [ Blog]<</div>
|
|
|
|
|
Im writing a program to monitor my horrible Wlan card, and id like to include the signal strength there. Now the problem is that i cant find a property for signal strength anywhere.
Microsofts WLan API is more geared towards managing(connecting and profiling SSIDs) from what ive seen, and NetworkInterfaces dont apply directly to wireless cards and hence dont have this property.
Any help on this?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
