|
Why is ClickOnce not acceptable? From what you have said it would seem to be the best solution. Obviously there is something about your environment that makes it unacceptable. I cannot suggest anything else unless I know what the constraints are.
|
|
|
|
|
I have used the AppUpdater[^] and also works fine. It's similar to ClickOnce, though, so you might also have a problem with it.
Why is ClickOnce not acceptable?
|
|
|
|
|
Hello!
I don't know if I understand the problem correctly, that's why I'll ask about it first.
My computer stands behind a firewall that blocks all ports except for a few.
But I need these ports. So I thought to write a program that will route a port that is opened
by my firewall to a port that I can't get to it, and install it on another computer outside the
network with the firewall. First, is it a possible solution?
Second, can I write such a program in C#?
Thanks in advance!
Have a nice day!
|
|
|
|
|
Your explanation isn't very clear at all. You're making statements that contradict each other and you haven't provided any information about where the traffic is comming from that you want to redirect to where. Are the blocks that you're talking about on inbound traffic, or outbound? What ports??
Yevgeny Efter wrote: So I thought to write a program that will route a port that is opened
by my firewall to a port that I can't get to it,
This makes no sense at all.
What's the "other computer" outside the firewall?? What's it's purpose in life?
If you're talking about routing traffic from the Internet going to a specific port on a machine inside the firewall, the only thing that can redirect that traffic in the firewall itself.
If you're talking traffic comming from your machine that is going to a machine on the outside, then you have to open a connection on the target machine and the target port on that machine.
Yevgeny Efter wrote: Second, can I write such a program in C#?
I seriously doubt it.
|
|
|
|
|
I know this isn't the right forum, but the right forum has disappeared. I re-installed VS 2008, then ReSharper yesterday on my laptop, and now my Intellisence isn't working in the XAML editor. It works everywhere else, and on my desktop machine it works in the XAML editor as well. I really don't feel like trying another re-install just to be disappointed again. Any ideas?
|
|
|
|
|
I have about 11 pcs that after running the installer (built with vs), the winform application will not start. The event log does not contain errors. It does contain a message about the install completing sucessfuly. When I double click on the application icon, it displays an hourglass, then the hourglass goes away, and then nothing. No error message is displayed.
I have had our desktop support team run software inventories on the affected PCS. All PCS are XP with sp1 with varying amounts of memory from 512mb to 1.25gb of ram.
Other PCS that the application was installed on work just fine.
Any thoughts about what I should look for would be appreciated. 
modified on Monday, December 03, 2007 4:59:11 PM
|
|
|
|
|
Is the .Net Framework installed on these machines?
"On one of my cards it said I had to find temperatures lower than -8. The numbers I uncovered were -6 and -7 so I thought I had won, and so did the woman in the shop. But when she scanned the card the machine said I hadn't.
"I phoned Camelot and they fobbed me off with some story that -6 is higher - not lower - than -8 but I'm not having it."
-Tina Farrell, a 23 year old thicky from Levenshulme, Manchester.
|
|
|
|
|
Yes it is.
I have narrowed the probelem down to this error message:
"Attempted to read or write protected memory. This is often an indication that other memory is corrupt. Exception Type: System.AccessViolationException "
I was able capture some information and put it into the event log. The form starts to execute and calls the InitializeComponent() method. The InitializeComponent() method first instantiates all the controls and then it trys to start setting the properties for a tab control. When settting the tab control properties it throws the error above. This form was converted from .net 1.1 to 2.0. Also, the research I have found on this error is it was previously threw a null reference exception in 1.1. However we never had any problems with this form in 1.1.
The really strange thing is that when I do a remote desktop connect to the PC from my laptop (we are 2 floors apart), the code works just fine. If I go down stairs and login to the PC directly, the code does not work.
Thanks,
patrick
|
|
|
|
|
Weird. The remote desktop behaviour suggests to me that there might be some kind of graphics card/driver related problem on the target PC, but that's only a guess and very dubious one at that.
"On one of my cards it said I had to find temperatures lower than -8. The numbers I uncovered were -6 and -7 so I thought I had won, and so did the woman in the shop. But when she scanned the card the machine said I hadn't.
"I phoned Camelot and they fobbed me off with some story that -6 is higher - not lower - than -8 but I'm not having it."
-Tina Farrell, a 23 year old thicky from Levenshulme, Manchester.
|
|
|
|
|
yeh it is weird alright it is even tougher trying to explain to the users what is wrong.
|
|
|
|
|
I drag a wpf button on to a wpf form and wire up it's OnClick to display a message box (Helo, world!  ).
When the button is clicked (whilst running) it's background colour repeatedly cycles between the mouse over and mouse out states (ie Highlighted/Un-Highlighted).
This can't be normal, can it?
-- modified at 12:54 Saturday 1st December, 2007 - added code example:
I'm think this is perhaps a default behavior, but how can it be over-ridden?
-- modified at 14:45 Saturday 1st December, 2007
Right, after much farting about, this does seem to be a default behaviour applied to buttons when they have focus. I shall fart about a bit more to see how styles can be applied to change this.
-- modified at 18:59 Saturday 1st December, 2007
ARRRRRRRGGGGGGGGGGGHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH!!!!!!!!!!11
WHY IS NOTHING EVER EASY!!!!!!!!!!!!!!!!!!!!!!!!
"On one of my cards it said I had to find temperatures lower than -8. The numbers I uncovered were -6 and -7 so I thought I had won, and so did the woman in the shop. But when she scanned the card the machine said I hadn't.
"I phoned Camelot and they fobbed me off with some story that -6 is higher - not lower - than -8 but I'm not having it."
-Tina Farrell, a 23 year old thicky from Levenshulme, Manchester.
|
|
|
|
|
The styling you are referring to is the new standard in Windows Vista for the button control. To override the syling you can create a copy of the control template in Microsoft Expression Blend and delete that behavior.
Regards,
Thomas Stockwell
Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning.
Visit my homepage Oracle Studios[ ^]
|
|
|
|
|
Hello All,
Please tel me where can i find VS2005 load test from the IDE or how can i do load test using VS2005 load test [please explain from the scratch]. Do i need to install anything other than VS2005 to do load test? is it a separate tool? please advice me.
Thanks and regards,
Ali
|
|
|
|
|
Have you tried google?
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
|
|
|
|
|
yes but not much informative
|
|
|
|
|
Hi,
Can someone help me in understanding the additional features provided in .NET 2.0 for Webservice development or how webservice development differs in .NET 1.1 and .NET 2.0
Thanks - kalai.
|
|
|
|
|
MSDN should have something on that.
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
|
|
|
|
|
I can't give you the specifics, but there are definitely improvements and additions on the XML protocol standards, additional web method attributes and general bug fixes or performance improvements.
Daniel Minnaar
Lead Software Developer
|
|
|
|
|
i'm developing on a wss 3 site (on a VPC staging image) and just seen that the application is running with version .NET 2.5...
how do i get it to use .NET 3. i need to use one of the new components that comes with .NET 3 but have no idea how to get to it.
the class i need is called ExcelPackage which is apparently part of the System.IO.Packaging component in the WindowBase.dll installed in the GAC.
Paul Keys
Director
Ingwe Business Solutions, South Africa
www.ingwesolutions.com
|
|
|
|
|
Sorry guys nevermind managed to find a way around, here's the answer for those of you who ever have the same problem:
.NET 3 just includes a few extra components etc and actually runs on top of .NET 2 (when you install .net3 it installes .net2 first). in IIS you can't actually set an app to run in .net3 but the extra components should be available to you.
Paul Keys
Director
Ingwe Business Solutions, South Africa
www.ingwesolutions.com
|
|
|
|
|
I'm writing a C# Windows/.Net 2.0 app which will take a large XML document as an initial input. My form has 4 basic controls: 3 comboboxes (Country, State, and City) for filtering the XML data and a DataGrid to display the results. The XML doc has this format:
<updates xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<locations>
<country name="United States">
<state name="California">
<city name="Santa Monica">
<location id="2" venue_id="1" category="Hotel" name="Example Hotel" address="3214 Wilshire Blvd." zipcode="90404"/>
<location id="3" venue_id="2" category="Airport" name="Santa Monica Airport" address=" 3223 Donald Douglas Loop"/>
</city>
<city name="Los Angeles">
<location id="4" venue_id="3" category="wwan" name="Cell Carrier GPRS Network" address="Entire LA Metro Area"/>
</city>
<city name="San Diego">
<location id="5" venue_id="1" category="Hotel" name="Mike Hotel" address="3214 Mike Blvd." zipcode="90414"/>
<location id="6" venue_id="2" category="Airport" name="John Airport" address=" 3223 john Douglas Loop S Ste 3"/>
<location id="7" venue_id="1" category="Cafe" name="New Hotel" address="3214 New Scott Blvd." zipcode="90434"/>
<location id="8" venue_id="2" category="Bar" name="New Airport" address=" 3223 New Douglas Loop S Ste 4"/>
</city>
</state>
<state name="Colorado">
<city name="Colorado Springs">
<location id="2" venue_id="1" category="Hotel" name="Example Hotel" address="3214 El Paso Blvd." zipcode="90404"/>
<location id="3" venue_id="2" category="Airport" name="Colorado Springs Airport" address=" 3223 Airport Drive"/>
</city>
<city name="Denver">
<location id="4" venue_id="3" category="wwan" name="Cell Carrier GPRS Network" address="Entire COSP Metro Area"/>
</city>
</state>
</country>
</locations>
</updates>
I have no problem using XPath queries to extract the values to populate the Country, State, and City comboboxes; each selection drives the data in the subsequent combobox. Upon selection in the City combobox, I can query for a resulting set of 'locations'. My problem is how to stuff this XmlNodeList into a DataSet which I can then use with my DataGrid. I have no problem reading an entire document into a DataSet
DataSet ds = new DataSet();
ds.ReadXml("Test.Search.xml");
but have no idea how to stuff an XmlNodeList into one.
Thanks.
Jack80918
|
|
|
|
|
Unfortunately, I don't think there is currently support on the NodeList or Navigator objects to do that. Besides, I would recommend that you rather create the appropriate DataTables and DataColumns manually for this operation and then use the Iterator to populate your DataSet manually.
It won't be alot of work and you still have the power to specify your types to the column.
Daniel Minnaar
Lead Software Developer
|
|
|
|
|
Anyone?
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
|
|
|
|
|
I've used it for a couple of clients who didn't want to pay for an editor. What do you need to know?
|
|
|
|
|
Yes, It's very nice. I use it on my site in the CMS to easily create new pages
http://www.antiyes.com/
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
