|
The article is quite old, I did not see any new activities lik questions being asked so I thought it wasn't active.
|
|
|
|
|
I want to get the name of the printer chosen in Acrobat PrintDialog using SendMessage Windows API.
This is sample code.
static string GetWindowText( hwnd_printDialog_in_Acrobat )
{
int comboBoxCount = 0;
int HWND_PRINTER_NAME = 1 ;
List<intptr> ChildPtrList = GetChildWindows(hwnd_printDialog_in_Acrobat);
for( i=0 ; i < ChildPtrList.Size(); i++) {
GetClassName( ChildPtrList[i], sClass, 100);
if (sClass.ToString() == "ComboBox") {
comboBoxCount++;
if (comboBoxCount == HWND_PRINTER_NAME ) {
hwnd = ChildPtrList[i];
break;
}
}
}
ChildPtrList.Clear();
int sSize ;
sSize = SendMessageW( hwnd, WM_GETTEXTLENGTH, IntPtr.Zero, IntPtr.Zero )+1;
StringBuilder sbTitle = new StringBuilder( sSize );
SendMessageW( hwn, WM_GETTEXT, (IntPtr)sSize, sbTitle);
return (sbTitle.ToString());
}
The return value of sSize is 4; The value of sbTitle.ToString() is "?-" etc.
The expected result what I want is "HP Officejet Pro .. ", for example.
What is wrong?
Thanks in advnace.
|
|
|
|
|
toBeH_S wrote: SendMessageW( hwn, WM_GETTEXT, (IntPtr)sSize, sbTitle);
You probably meant hwnd.
What is the following code doing:
StringBuilder title = new StringBuilder();
Int32 sSize = SendMessage((int)hWnd, WM_GETTEXTLENGTH, 0, 0).ToInt32();
if (sSize > 0)
{
sbTitle = new StringBuilder(sSize + 1);
SendMessage(hwnd,( int)WM_GETTEXT, sbTitle.Capacity, sbTitle);
}
return sbTitle.ToString();
There could also be a Unicode problem.
~RaGE();
I think words like 'destiny' are a way of trying to find order where none exists. - Christian Graus
Do not feed the troll ! - Common proverb
|
|
|
|
|
Rage wrote: What is the following code doing:
StringBuilder title = new StringBuilder();
Int32 sSize = SendMessage((int)hWnd, WM_GETTEXTLENGTH, 0, 0).ToInt32();
if (sSize > 0)
{
sbTitle = new StringBuilder(sSize + 1);
SendMessage(hwnd,( int)WM_GETTEXT, sbTitle.Capacity, sbTitle);
}
return sbTitle.ToString();
1. The above code retrieves the name of the printer chosen from the printer name combobox in printDialog.
hwnd : handle of the printer name combobox in PrintDialog of Acrobat.
1) Firstly, get the length of the printer name.
int sSize=SendMessage((int)hwnd, WM_GETTEXTLENGTH, 0,0),ToInt32();
2) Secondly, memory allocation for the name of the printer.
sbTitle = new StringBuilder( sSize + 1);
3) Finally, retrieve the name of the printer using SendMessage Windows API.
SendMessage(hwnd, (int)WM_GETTEXT, sbTitle.Capacity, sbTitle);
What I want is to retrieve the name of the printer chosen in acrobat printDialog from another application via SendMessage.
2.
Rage wrote: There could also be a Unicode problem.
Maybe you right.
The original version is as follows:
if ( isWindowUnicode(hwnd)) {
StringBuilder title = new StringBuilder();
Int32 sSize = SendMessageW((int)hWnd, WM_GETTEXTLENGTH, 0, 0).ToInt32();
if (sSize > 0)
{
sbTitle = new StringBuilder(sSize + 1);
SendMessageW(hwnd,( int)WM_GETTEXT, sbTitle.Capacity, sbTitle);
}
return sbTitle.ToString();
}
|
|
|
|
|
toBeH_S wrote: What is the following code doing:
 With that statement I was actually trying to ask you to try the code I have put in my post: it is very similar to yours, with a few more tests to check the size (and hence check if the GETTEXTLENGTH is working) and some safer practices.
~RaGE();
I think words like 'destiny' are a way of trying to find order where none exists. - Christian Graus
Do not feed the troll ! - Common proverb
|
|
|
|
|
I'm so sorry several days I can't come back.
I have several urgent jobs and my program runs abnormally, so I tried to fix them.
I apologize my being away from your advise.
|
|
|
|
|
I would like to create an extension method that randomly permutes the contents of an ordered list (preferably in-place). This is what I have so far:
public static class PermuteExtensions {
public void Permute<T, U>(this T list) where T : IEnumerable<U> {
U[] tempArray = list.ToArray();
long arraySize = tempArray.LongLength;
long[] indexes = new long[arraySize];
long j = 0;
IEnumerator<U> enumer = list.GetEnumerator();
while (enumer.GetNext()) {
enumer.Current = tempArray[indexes[j++]];
}
}
}There are two problems with this approach:
1. I cannot figure out how to modify the contents of an IEnumerable object.
2. How to specify the constraint on T such that I allow this method to be called on the ordered collections (IList, Stack, Queue, List, LinkedList), but not on the unordered collections (IDictionary, Dictionary, ISet, Set).
It is NOT a firm requirement that this be an in-place algorithm. However, I don't know how to construct a new T object that offers a consistent way to add objects for all of the ordered collections listed above. Thanks,
Sounds like somebody's got a case of the Mondays
-Jeff
|
|
|
|
|
You're trying to modify a collection through the IEnumerable interface. This is something you are expressly forbidden to do as modifying the target of an enumerator invalidates the state of the enumerator.
Since each of these ordered collections is a different implementation, and only has the IEnumerable interface in common, I don't think there is an extension solution.
I think you would have to create new versions of these ordered collection types, inheriting from them so you can manipulate the underlying structures and still maintain the business rules of the parent class. For instance, a List collection, internally, works a bit differently from a Stack and works very differently from LinkedList. Each is going to have to have it's own wrapper implementation.
But, why would you even want to randomly rearrange the objects in a Stack or a LinkedList anyway? I see no productive reason to do so.
|
|
|
|
|
But, if someone with the intelligence, and skill, of Dave K. says this cannot be done as an extension, and that you will need to have wrappers for each of your Types you wish to "permutate:" I'd accept his opinion, and pursue his suggestions, if you must do this.
However, that doesn't stop me, out of curiousity, just starting to see how this might be done (but, not as an extension).
Here's some code I started, and will not have time to work-on further for a while, but perhaps it will be useful to you in some way:
// Visual Studio 2012 RC
// Framework 4.5
// WinForms: one Form with one Button it named 'Permute
//
// build a List of Types to permute
private static List<Type> OkayCollectionTypes = new List<Type>()
{
typeof(List<>),
typeof(Stack),
typeof(Queue),
typeof(LinkedList<>)
};
// create some samples to play with
private static List<int> IntList = new List<int>() { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 };
private static Stack AStack = new Stack(IntList as IList);
// test stub for Permute function
private static dynamic Permute(dynamic permuteTarget)
{
Type currentType = permuteTarget.GetType();
// Note: we cannot use Type.GetType() here
// an error will be thrown
// see comments in the BtnPermuteClick EventHandler
if(OkayCollectionTypes.Contains(currentType))
{
MessageBox.Show("okay : Type = " + permuteTarget.ToString());
}
else
{
return null;
}
// at this point we create a new instance
// of 'permuteTarget that we permutate ?
// to be explored ...
return (permuteTarget);
}
private void BtnPermuteClick(object sender, EventArgs e)
{
// this works
// although it has no effect on AStack's contents
AStack = Permute(AStack);
// this will not work
// because the type of IntList is:
// System.Collections
// .Generic.List`1
// [
//[System.Int32,
// ... snip ...
//PublicKeyToken=b77a5c561934e089]
// ]
// if we tried to use Type.GetType() in the Permute method
// an error would be thrown like this:
//'System.Collections.Generic.List<int>' does not contain a definition for 'Type'
// var mutatedList = Permute(IntList);
}Obvious questions to be explored:
0. is using 'dynamic here the source of all problems ?
1. is the problem with trying use the 'Permute method on 'IntList here created by the fact that I am using direct assignment to create the contents of 'IntList, thus making its contents not usable for some reason ?
No, it is not, because initializing IntList in a for loop using 'Add: the Type of the dynamic parameter in the Permute method will look like this when examined at run-time using the Command window after reaching a break-point:
> ? currentType is IList
false
> ? currentType is List<int>
false
* the following edited for brevity
> ? currentType.GetType()
{Name = "RuntimeType" FullName = "System.RuntimeType"}
[System.RuntimeType]: {Name = "RuntimeType" FullName = "System.RuntimeType"}
base {System.Reflection.MemberInfo}: {Name = "RuntimeType" FullName = "System.RuntimeType"}
AssemblyQualifiedName: "System.RuntimeType, ... snip ... PublicKeyToken=b77a5c561934e089"
BaseType: {Name = "TypeInfo" FullName =
GenericParameterPosition: 'currentType.GetType().GenericParameterPosition' threw an exception of type 'System.InvalidOperationException'
GenericTypeArguments: {System.Type[0]}
GUID: {97e69551-7329-39c5-ba61-2ca4b573e0e5}
IsClass: true
IsGenericType: false
UnderlyingSystemType: {Name = "RuntimeType" FullName = "System.RuntimeType"}Out of time: now.
best, Bill
<color>"When it comes to atoms, language can be used only as in poetry. The poet, too, is not nearly so concerned with describing facts as with creating images." Niels Bohr
|
|
|
|
|
Skippums wrote: 1. I cannot figure out how to modify the contents of an IEnumerable object.
As you've discovered, you can't change the object you're enumerating over because you'd invalidate the enumerator. What you could do, though, is not use the enumerator - instead, you can iterate over the collection by index using a for loop, and update the underlying array using that instead. So, your loop becomes something like:
for (int i = 0; i < list.Count; i++)
{
list[i] = tempArray[indexes[j++]];
}Note that this isn't possible for something like a LinkedList.
As for the constraint - I'm afraid that you can't do this at the constraint level. You'd have to test this in the actual method body and raise an exception if it was the wrong type.
modified 12-Sep-12 7:28am.
|
|
|
|
|
Pete O'Hanlon wrote: Note that this isn't possible for something like a LinkedList.
This is exactly why I said he'd have to wrap each collection he wanted to do this to.
|
|
|
|
|
You can't modify an IEnumerable. You can't modify a Queue or a Stack via array indexing, either. So I don't think it's reasonable to try to do this in place except with an IList.
List<T>, Stack<T> and Queue<T> all have a constructor that takes an argument of type IEnumerable<T>, so you could potentially build a new instance of the same type that you started with.
However, considering you are already making a copy of the complete contents of the collection, and storing them in a temporary array, why not just return a List<T> with those items?
|
|
|
|
|
BobJanova wrote: You can't modify a Queue or a Stack via array indexing
Damn, I should have mentioned that point. My 5 for that.
|
|
|
|
|
As to the, "why not just return a list", the answer is that I feel like I should return the same type that is passed in. No particular reason, in fact I really only need this to work on a list, but prefer to write code that is reusable whenever possible.
Sounds like somebody's got a case of the Mondays
-Jeff
|
|
|
|
|
|
Thanks everyone for the feedback! The solution I went with is the following:
public static class Permutation {
private static Random rand = new Random();
public static T[] Permute<T>(IEnumerable<T> list) {
T[] permArray = list.ToArray();
long arraySize = permArray.LongLength;
long[] perm = Permutation.Random(arraySize);
long i = 0;
foreach (T item in list) {
permArray[perm[i++]] = item;
}
return permArray;
}
public static long[] Random(long size) {
long[] perm = new long[size];
lock(rand) {
for (long i = size - 2; i >= 0; --i) {
perm[i] = rand.NextInt64(size - i);
for (long j = i + 1; j < size; ++j) {
if (perm[i] <= perm[j])
++perm[j];
}
}
}
return perm;
}
}This will allow a client a way to get a permutation from a set or dictionary as well. Thanks again for the ideas!
Sounds like somebody's got a case of the Mondays
-Jeff
modified 13-Sep-12 13:32pm.
|
|
|
|
|
Nice work !
The question of what you'd need to do randomly re-order a Dictionary<T,V> remains of interest to me.
best, Bill
<color>"When it comes to atoms, language can be used only as in poetry. The poet, too, is not nearly so concerned with describing facts as with creating images." Niels Bohr
|
|
|
|
|
Dictionaries don't have order anyway.
|
|
|
|
|
Skippums wrote: make the method that returns the array public
That sounds like a better idea. And/or something like a RandomSequence(int n) that returns an array of 0..n in random order.
|
|
|
|
|
Actually, I did end up making my method that returns a T[] public, and deleted all the wrapper methods. I figured that if clients want the result in a stack, queue, list, etc., they can build it themselves with a simple constructor call. Plus, having an extension method on IEnumerable allows a client to get a permutation from a set, which seems like it could be a useful operation.
PIEBALDconsult wrote: something like a RandomSequence(int n) that returns an array of 0..n in random order
Actually, in the code I posted, a client can get this with a call to long[] Permutation.Random(long size). I suppose I could add the same code for int, but don't really see the point. I also thought about allowing a client to get a specific permutation, but that only works for permutations up to length 20 (since 21! > 264), unless I include a large integer library.
Sounds like somebody's got a case of the Mondays
-Jeff
|
|
|
|
|
In a C# 2010 application, I have the following value obtained from an Xdocument,
Det.Element("TransCount").Value.
I would like to know how to change this xdocument type to an integer data type.
|
|
|
|
|
It's just a string variable. You should use int.TryParse to convert it into an integer.
|
|
|
|
|
I tried what you suggested and that did not work. do you have any other suggestions?
|
|
|
|
|
rachel_m wrote: I tried what you suggested and that did not work.
What does that mean? Did it not compile, or did you get an exception during execution? If yes, can you post the message here?
rachel_m wrote: do you have any other suggestions?
Convert.ToInt32, but the TryParse method should work too. I suggest you try again.
Bastard Programmer from Hell 
if you can't read my code, try converting it here[^]
|
|
|
|
|
the
Convert.ToInt32 worked. Thanks!
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
