C# Discussion Boards - CodeProject

Dan Neely6-Sep-05 7:06

6-Sep-05 7:06

IF you're using 32bit color that's ~1.2gigs of data. Between application and OS level overhead, you'll probabably need at least 1.5gig of ram to keep the entire working set in memory at once. If your application needs to run on more modest machines you'll need to redesign your architecture to only load a fraction of the images at a given time. You could try storing the data in memory in a compressed format and only expanding the images as needed, you'll still have a fairly large ammount of overhead, but if you need the entire collection in working memory at once it would probably be better than thrashing the swapfile.

Re: faster access memory

Andrew Kirillov6-Sep-05 8:25

Andrew Kirillov

6-Sep-05 8:25

Hello

If you are trying to perform some image processing routines, then you should use LockBits and process your image using unsafe mode. It will be much faster, then using SetPixel/GetPixel.

But, as it was already said here, you need to avoid loading all 300 images. Even with unsafe mode it will be rather slow, because you will need much memory. And if you have no such much memory, then will lose performance on memory swapping.

With best regards,
Andrew

DirectPlay Problem with C#

Zeeshan Gulzar6-Sep-05 5:20

Zeeshan Gulzar

6-Sep-05 5:20

I am facing a problem with DirectPlay in C# is that

I want to simulate half duplex voice chating. Like whenever a person want to
talk, it press a button "Push to Talk". So, all other persons listen like in conference room. It means only one person can talk at one time. If someone press the button "Push to talk" while another talking, voice quality should be degrade.

Can i do this with TCPClient / TCPListener classses. If yes, how i can get audio stream from TCPClient object and how i playback.

Thanks Thanks Thanks in advance. Please help me urgently

Zeeshan

Saved file images

Jerry Hammond6-Sep-05 4:49

Jerry Hammond

6-Sep-05 4:49

I'm a little fuzzy on this. How do I get a saved filed to display the same Icon/image as the application?

Thank you for you responses.

Jerry

"Art doesn't want to be familiar. It wants to astonish us. Or, in some cases, to enrage us. It wants to move us. To touch us. Not accommodate us, make us comfortable." -- Jamake Highwater
Toasty0.com
My Grandkids

Re: Saved file images

Nick Parker6-Sep-05 8:44

Nick Parker

6-Sep-05 8:44

Toasty0 wrote:
How do I get a saved filed to display the same Icon/image as the application?

You need to call SHGetFileInfo through P/Invoke. A perfect example can be found here[^].

- Nick Parker
Microsoft MVP - Visual C#
My Blog | My Articles

Re: Saved file images

Jerry Hammond6-Sep-05 10:40

Jerry Hammond

6-Sep-05 10:40

Thanks Nick. I think I've figured out my problem. I have not actually installed the program on my development box so no file association or icon exists yet.

Thank you for your quick response to my question.

Jerry

"Art doesn't want to be familiar. It wants to astonish us. Or, in some cases, to enrage us. It wants to move us. To touch us. Not accommodate us, make us comfortable." -- Jamake Highwater
Toasty0.com
My Grandkids

Windows Services

Member 19735946-Sep-05 4:39

Member 1973594

6-Sep-05 4:39

Hi,

Would anyone know why creating an instance of a COM Object within a Windows Service would throw up a QueryInterface failed error?

Are there any special permissions required?

Thank you.

Client/Server Communication

batmanAgen6-Sep-05 4:35

batmanAgen

6-Sep-05 4:35

hi,
Does anyone know how can i view/get information about running application on my client pcs in my network through my network server? i want to get license information of the application. i also want to monitor the frequency of usage of the app. what are the things that i need to learn and consider in building such application? need your help and suggestions guys... thnx...

-batmanAgen-

Re: Client/Server Communication

John Fisher6-Sep-05 4:45

John Fisher

6-Sep-05 4:45

Hi,
The description is a bit vague, so I'm not really sure what you're going for. If you are talking about writing your own network communication, read up on the multitude of ways to handle such things (web services, .NET remoting, direct TCP/IP communication, etc.).

Another possible solution is to use the performance counters available through Windows. Here's an MSDN search to get you started. http://search.microsoft.com/search/results.aspx?view=msdn&st=b&na=82&qu=performance+counters+c%23&s=1[^] You can also explore this by opening "Administrative Tools" from the "Control Panel", then selecting "Performance".

John

"You said a whole sentence with no words in it, and I understood you!" -- my wife as she cries about slowly becoming a geek.

web.config Help

Brendan Vogt6-Sep-05 3:25

Brendan Vogt

6-Sep-05 3:25

Hi,

Does any one know where I can read a good article on the web.config file? I'm still stuck on my problem, and no-one can seem to help me. I can't seem to find a good article as well.

Let me describe my problem again.

My website has 2 login sections, namely:

wwwroot/members/login.aspx and
wwwroot/admin/login.aspx

Only members can access the members section, and only admin people can access the admin directory. Each section has it's own directory structure.

If someone tries to access a page in the members directory, then he/she should be directed to the /members/login.aspx page, and if he/she wants to access an admin page, then he/she is directed to /admin/login.aspx.

I'm not sure how to set this in the web config file, and if this is the best place to set it. I need this kind of info, and must the web.config file lie in wwwroot, or under /admin/, or under the /members/ section.

How do I modify my web.config file(s) to handle this.

Any online docs/books will be appreciate!!

I hope someonme can help!!

Regards,
Brendan

Re: web.config Help

Mohamad Al Husseiny6-Sep-05 4:27

Mohamad Al Husseiny

6-Sep-05 4:27

do you tried somthing like

<configuration>
    <system.web>
        <authentication mode="Forms">
            <forms loginUrl="login.aspx" />
        </authentication>
        <authorization>
            <deny users="?" />
        </authorization>
    </system.web>
      <location path="/admin">
      <system.web>
        <authorization>
            <deny users="?"/>
        </authorization>
      </system.web>
   </location>
</configuration>

for more info look at
Using Forms Authentication in ASP.NET - Part 1
[^]
Using Forms Authentication in ASP.NET - Part 2 [^]
Forms Authentication Tutorial [^]

MCAD

-- modified at 10:32 Tuesday 6th September, 2005

Best practice with threads?

6-Sep-05 3:13

Hi guys & girls,
I've a problem with threads. I write a Windows Service which handles files. The processing can take some time, so I need to use threads, as some of the files have to be processes as fast and can not wait while other files are getting processed.

My application is designed as follows:

I've three modules. The first module reads and writes "internal" files. The third module reads and writes "external" files. The second modle converts the files, either internal or external, into the other format.

So when the first module gets a file, it gives an object representing the file to the second module, where the file is converted and then the second module gives the object to the third module where it is saved. For external files its the same, just the other way round.

So I thought about using either FileSystemWatcher or a Timer for checking for new files on both sides and then start a thread for each file. But with this the method calls will start in the first module and stop in the last.

So I thouhgt about a different approach. I could create some buffer between the modules and on each side of the buffer a thread looking for new files in the buffer. In the converter module, where the time consuming part takes place I could then start new threads for each file, but this threads would stay inside the module.

I just don't know which approach is better or maybe both of them are bullsh**, so could someone please give me some help with this? I want to create a clean application but I haven't worked much with threads and so I just don't know what would be better. With the second approach I could control the number of working threads better, but I'm just not shure if it is a good method, so please help me with that!

greetings

Stampede

-- modified at 9:20 Tuesday 6th September, 2005

Re: Best practice with threads?

John Fisher6-Sep-05 4:36

John Fisher

6-Sep-05 4:36

Depending upon how many files you may be converting simultaneously, you could run into slower performance because of too many threads. So, the ideal solution would be to use a thread pool of some kind. And here, you're in luck! There is an easy-to-use thread pool built into the .NET Framework.

With no more information that what you've described, I would suggest that you do something similar to the converter-thread idea. Combine this with the built-in thread pool capabilities of the .NET Framework.

To do this, either create events in the first and third modules, having the converter subscribe to them. Or, create a delegate in the converter module, which the first and third modules can access. Then, instead of simply calling the delegate directly, use the BeginInvoke() method. (Also, make sure you handle things properly with EndInvoke when the callback is triggered. Otherwise, you can have leaks.) This method will use the built-in thread pool to execute the function used by the delegate!

John

"You said a whole sentence with no words in it, and I understood you!" -- my wife as she cries about slowly becoming a geek.

Re: Best practice with threads?

Andy Brummer6-Sep-05 4:46

Andy Brummer

6-Sep-05 4:46

Both the system.timers.timer and the FileSystemWatcher fires events from the thread pool, so your first approach is going to be easier to code and maintain. You shouldn't have to create or manage threads at all in your app. Just write your event handlers like you normally would and concurrent events will be fired on seperate threads. The only thing you have to look out for is syncronization of shared resources.

I can imagine the sinking feeling one would have after ordering my book,
only to find a laughably ridiculous theory with demented logic once the book arrives - Mark McCutcheon

code management software

Mridang Agarwalla6-Sep-05 2:50

Mridang Agarwalla

6-Sep-05 2:50

i know this isnt the appropriate place to post this but sice i see a large number of people using this forum, i decided to go ahead. I have a lot of code snipptets lying in my computer which i require regulary. Is there some of code management software. I once used to use Artifact Desktop a.k.a CodeJack but it was shut down. Anything similar?

Faulting application

BenniEvald6-Sep-05 2:24

BenniEvald

6-Sep-05 2:24

Hi!
I have a big problem, my VS 2003 crach all the time.
In the loggbook I can see:

Faulting application devenv.exe, version 7.10.3077.0, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00043345.

Serching on the net, I can understand that I am not the only one,
and somone was talking about a hotfix.

Is there anyone, who can help me???

Thanks
Benni Svensson
info@saw.se

Fill After Insert Fails

rich_wenger6-Sep-05 2:00

rich_wenger

6-Sep-05 2:00

I've created a sqldataadapter, stored procedures, and a data set using the VS2003 IDE Wizard based on a select command with a single paramter; search and updates work fine. I've got non-null columns in my database so I had to create a new Datarow in the data set and update that to perform an insert. The problem is the follow-up fill (sqlDataAdapter1.Update(dsStaffPhysicians1) to repopulate the dataset errors. Any help would be greatly appreciated.

Code Snippet Follows=================================================

static void Main()
{
Application.Run(new Form1());
}

private void menuItem2_Click(object sender, System.EventArgs e)
{
//Initialize Staff Physician Screen
SetupStaffPhysician();
menuItem2.Enabled = false;
}

private void menuItem3_Click(object sender, System.EventArgs e)
{
//Exit Application
Application.Exit();
}
private void SetupStaffPhysician()
{
panel1.Visible = true;
this.comboBox1.DataBindings.Add(new System.Windows.Forms.Binding("SelectedIndex", this.dsStaffPhysicians1, "tblStaffPhysicians.docLicenseState"));
}
private void ClearStaffPhysicians()
{
textBox1.Text = "";
textBox2.Text = "";
textBox3.Text = "";
textBox4.Text = "";
textBox5.Text = "";
comboBox1.SelectedIndex = 0;
}

private void btnSearch_Click(object sender, System.EventArgs e)
{
sqlDataAdapter1.SelectCommand.Parameters["@Param2"].Value = textBox3.Text;
dsStaffPhysicians1.Clear();
sqlDataAdapter1.Fill(dsStaffPhysicians1);
}

private void btnReset_Click(object sender, System.EventArgs e)
{
this.dsStaffPhysicians1.Clear();
ClearStaffPhysicians();
}

private void btnUpdate_Click(object sender, System.EventArgs e)
{
this.BindingContext[dsStaffPhysicians1, "tblStaffPhysicians"].EndCurrentEdit();
sqlDataAdapter1.Update(dsStaffPhysicians1);
sqlDataAdapter1.Fill(dsStaffPhysicians1);
}

private void btnInsert_Click(object sender, System.EventArgs e)
{
try
{
ClearStaffPhysicians();
}
catch(Exception exp)
{
MessageBox.Show("Error 001 " + exp.Message);
}
}

private void btnCommit_Click(object sender, System.EventArgs e)
{
DataRow newStaffPhysician = dsStaffPhysicians1.Tables["tblStaffPhysicians"].NewRow();
newStaffPhysician["docLName"] = textBox3.Text;
newStaffPhysician["docFName"] = textBox1.Text;
newStaffPhysician["docMName"] = textBox2.Text;
newStaffPhysician["docLicenseState"] = comboBox1.SelectedIndex;
newStaffPhysician["docLicenseNumber"] = textBox4.Text;
newStaffPhysician["docUpin"] = textBox5.Text;
dsStaffPhysicians1.Tables["tblStaffPhysicians"].Rows.Add(newStaffPhysician);
sqlDataAdapter1.Update(dsStaffPhysicians1);
//Fill method will error!!
sqlDataAdapter1.Fill(dsStaffPhysicians1);
}

}
}

Re: Fill After Insert Fails

John Fisher6-Sep-05 4:53

John Fisher

6-Sep-05 4:53

This may not fit with the parameters of your application design, but the examples show the Fill command being executed before the Update. (So you could move the Fill command to the top of your btnCommit_Click function.)

Also, for this type of problem, it is far more likely that you will get valuable help if you provide a detailed error message in your post. Smile | :)

John

"You said a whole sentence with no words in it, and I understood you!" -- my wife as she cries about slowly becoming a geek.

Unload DOM

ksanju10006-Sep-05 1:28

ksanju1000

6-Sep-05 1:28

Hi I need to free the memory occupied by xml document.
I tried to use this code inside button
XmlDocument xmldoc = new XmlDocument();
xmldoc.Load("c:/a.xml");

you can check for memory performance in windows task manager
I have already made one project The problem is coming in this xml loading
every time its creatting own instance and incraeasing the memory.
If any one has any idea to free momory
if some one give me example of relasing momory
thanks

Re: Unload DOM

John Fisher6-Sep-05 5:21

John Fisher

6-Sep-05 5:21

Could you explain the setup a little more? The .NET Framework's garbage collection usually handles these things quite nicely. Unless you are loading many XML documents and keeping references to them (so the garbage collector thinks you still need them), you shouldn't have any problems.

As a side note, if you are processing many XML documents, and using them in a read-only fashion. You can gain performance by using either XmlReader or XPathDocument. (I prefer XPathDocument.)

John

"You said a whole sentence with no words in it, and I understood you!" -- my wife as she cries about slowly becoming a geek.

Re: Unload DOM

ksanju10006-Sep-05 20:35

ksanju1000

6-Sep-05 20:35

Hi John,
In my project every time XML file is loaded and read thr Xml reader but when the form is closed it should be freed by memory but it does not happen its due to XmlDocument
I just for example tried to do inside the button i want that after pressing the button it should load and free the memory occupied by processor.

Do you have any idea you can tell me in class to load the XMlDocument and Unload XmlDocument
Thanks
sanjeev

Re: Unload DOM

John Fisher7-Sep-05 4:09

John Fisher

7-Sep-05 4:09

It sounds like you are watching some sort of Windows memory tool (like TaskManager). This is not an accurate way to analyze memory usage in the .NET Framework. (It does not instantly free memory when you quit using a variable.) Read a few articles like this[^], and you'll have a better understanding of the real behavior of garbage collection in the .NET Framework.

John

"You said a whole sentence with no words in it, and I understood you!" -- my wife as she cries about slowly becoming a geek.

Web Services in VS 2003

seee sharp6-Sep-05 1:22

seee sharp

6-Sep-05 1:22

Hi,

I have written a web service and need to connect to that using win form. In Visual Studio 2003, when I try to add web reference using LAN IP, it works. But if I use internet IP for the same service/server/IIS/machine, Visual Studio gives a prompt for "Discovery Credential For Proxy Server".
What I need to provide there, or how can I get rid of this, please help.

- ashish

Richetextbox problem again

snouto6-Sep-05 1:13

snouto

6-Sep-05 1:13

Hello dudes ?
I have another problem i use richtextbox to edit some text but i don't know how to insert multiple lines of text in that richtextbox but i need each line with its specific font and color attributes i used this code my friend gave me here is the code

<br />
string message = "Snouto : " + textBox1.Text;<br />
			richTextBox1.Text += message + "\r\n";<br />
			int pos = 0;<br />
			while(pos < richTextBox1.TextLength)<br />
			{<br />
				int index = richTextBox1.Find(textBox1.Text,pos,RichTextBoxFinds.None);<br />
				if(index == -1)<br />
					break;<br />
				richTextBox1.Select(index,textBox1.Text.Length);<br />
				richTextBox1.SelectionFont = fontDialog1.Font;<br />
				richTextBox1.SelectionColor = colorDialog1.Color;<br />
				pos = index + RichTextBox1.TextLength;<br />
			}<br />
			textBox1.Clear();<br />

but this code when i write one sentence ok it changes its font and color but when i write again the same sentence it changes the color and font of the first sentence to the defaul color and font and then it gives the new same sentence the changes in font and color i need to insert multiple lines of text and give each one color and font without being changed if i inserted again the same sentences what can i do ?
Please help me

Miss With The Best And Die Like The Rest

-- modified at 7:17 Tuesday 6th September, 2005

Re: Richetextbox problem again

S. Senthil Kumar6-Sep-05 1:51

S. Senthil Kumar

6-Sep-05 1:51

That's because you're using Find to find the sentence in the text and it obviously is finding both the first and the new sentence. I'd suggest using another variable to store the *previous* index, looping till the last Find (until index returns -1) and then using the previous index to set the color stuff. Or, if there is something like LastIndexOf, you could use it.

Regards
Senthil
_____________________________
My Blog | My Articles | WinMacro

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.