|
Sorry to say, but that doesn't help us answer your question at all. More code is required since no one here would know what Sincronizer is doing.
Guessing, however, you're probably not disposing connections, commands, or any other object that implements IDisposable. While managed objects are managed by the garbage collector (GC), the GC doesn't run unless 1) your application is idle, 2) your machine is running low on memory, or has been exhausted of all memory, or 3) you call GC.Collect, which is not recommended because it will block your threat while it finalizes objects. Good coding practices can get around that last problem by disposing objects correctly.
So, lets say in your implementation you re-use the IDbConnection implementation (for brevity, lets say you're using the System.Data.SqlClient) like SqlConnection. Fine, just make sure you open and close it correctly. For each command that you create, however, you need to dispose it when done:
using (SqlCommand cmd = conn.CreateConnection())
{
cmd.CommandText = "insert into MyTable (ID, Name) values (1, \"Bob\")";
try
{
conn.Open();
cmd.ExecuteNonQuery();
}
finally
{
conn.Close();
}
}The outer using statement makes sure the object is disposed, compiling to the following:
SqlCommand cmd = conn.CreateCommand();
try
{
cmd.CommandText = "...";
try
{
conn.Open();
cmd.ExecuteNonQuery();
}
finally
{
conn.Close();
}
}
finally
{
cmd.Dispose();
}As you should see, by expanding the try-finally blocks yourself instead of using using, you could eliminate an extra finally block which would improve performance a little in cases when an exception is thrown.
Also, if you're doing batch updates or inserts, use parameterized queries, re-using the same IDbCommand over and over. See SqlCommand.Parameters in the .NET Framework SDK for an example. While I'm at it, never use string concatentation for constructing SQL expressions - always use parameterized queries. This is far more secure (ever heard of SQL-injection attacks? string concatentation is the first step in making them possible) and actually alieviates quite a bit of your work when doing batch updates or inserts.
If you're using a DataSet to synchronize database, then you also need to dispose the DataSet otherwise it won't be disposed until your application is idle or until your memory is exhausted, which will happen long after you see a general drain on system resources (like CPU cycles).
Note that the disposable pattern doesn't mean the GC won't free your objects, like the "managed environment" means, but that you free the resources immediately. If you don't free them immediately it is not gauranteed when it will happen (taking into account the conditions I spoke of above and depending on the collection generation of the objects).
This posting is provided "AS IS" with no warranties, and confers no rights.
Software Design Engineer
Developer Division Sustained Engineering
Microsoft
[My Articles] [My Blog]
|
|
|
|
|
Thanks a lot for your answers. Maybe, I think, I'm hanging the UI thread because the Start() method is sycnhronous and doesn't return until it finishes. This would explain that when I was running this from the Console Application memory consumption was normal.
So, the question now is, how can I call this method without hanging the UI thread?
thanks,
Federico
|
|
|
|
|
Start it in a new thread:
Sincronizer s = new Sincronizer();
Thread t = new Thread(new ThreadStart(s.Start));
t.Start(); There's many other ways, too. Maybe your implementation of Sincronizer.Start starts itself in a thread (but make sure the caller knows to block before exiting; you can use Thread.Join for that). You could use a delegate and use BeginInvoke, and when you want to wait for it to finish you could use EndInvoke (which blocks until done (if not already), and returns any return value.
There is a catch: if you update any controls in your Windows Forms application, you need to use Control.InvokeRequired and Control.Invoke to invoke the method on the control in the thread on which the control was created. See the .NET Framework SDK documentation for either the property or method above for more information.
For more information on threading in the .NET Framework, read Threading[^] in the .NET Framework SDK.
This posting is provided "AS IS" with no warranties, and confers no rights.
Software Design Engineer
Developer Division Sustained Engineering
Microsoft
[My Articles] [My Blog]
|
|
|
|
|
I've (nearly) written a custom collection implementing IBindingList and ITypedList to use a datasource for the Datagrid.
The collection takes in the constructor the type of object the list will hold.
myCollection vehicleList = new MyCollection(typeof(Vehicle));
Using ITypedListGetItemProperties I then get a PropertyDescriptorCollection of Vehicle as the grid column header source. This all works fine.
However I intended that Vehicle could have a collection.
Public Class Vehicle<br />
{<br />
Class Vehicle(){}<br />
<br />
<br />
private MyCollection peopleList = new myCollection(typeof(People))<br />
<br />
public myCollection PeopleList<br />
{<br />
get{return peopleList;}<br />
}<br />
}<br />
when selecting this sublist as a link within the datagrid I'd like to re-use ITypedList.GetItemProperties to retrieve the public properties of type People.
So far I can identify the PropertyDescriptor for peopleList and it's type of MyCollection, but I can't get the instace of peopleList needed to retrieve it's collection type of People. From which I can then build the PropertyDescriptorCollection for People.
Is is possible to get the instance to which the propertyDescriptor is refering? If not I've wasted a lot of time getting this far 
|
|
|
|
|
the last free name wrote:
So far I can identify the PropertyDescriptor for peopleList and it's type of MyCollection...
What exactly do you mean by "I can". Do you mean the code you've written can, you can through the debugger or through Type discovery? Please be specific.
Also, you really only need to implement ITypedList if you need to customize the properties exposed to bindable controls. Controls that implement binding correctly (like those defined in the .NET Framework Class Library) use the BindingManagerBase class for binding, from which CurrencyManager and PropertyManager derive. If you bind your collection of objects correctly (see the DataGridTableStyle.MappingName property for more information and an example) then you get binding for free.
Implementing IBindingList, on the other hand, is a custom feat that really depends on your requirements, but the basic implementation you also get for free. For example, if your collection (or, rather, list) returns true for IList.IsReadOnly then items can't be added and the UI appears appropriately.
This posting is provided "AS IS" with no warranties, and confers no rights.
Software Design Engineer
Developer Division Sustained Engineering
Microsoft
[My Articles] [My Blog]
|
|
|
|
|
I am trying to map my ArrayList of type CRelation to data grid. CRelation class has two properties Child and Parent, both are of type CTable
<br />
public class CRelation<br />
{<br />
public CRelation()<br />
{<br />
}<br />
private CTable m_oPrntTbl;<br />
public CTable Parent<br />
{<br />
set {m_oPrntTbl=value;}<br />
get{return m_oPrntTbl;}<br />
}<br />
private CTable m_oChldTbl;<br />
public CTable Child<br />
{<br />
set {m_oChldTbl=value;}<br />
get{return m_oChldTbl;}<br />
}<br />
}<br />
<br />
<br />
public class CTable <br />
{<br />
public CTable()<br />
{<br />
}<br />
<br />
private string m_szName;<br />
public string Name<br />
{<br />
set{m_szName = value;}<br />
get{return m_szName;}<br />
}<br />
}<br />
<br />
Now i want to map the grid column to Name property of the Child
I am using following code to map the property
<br />
DataGridTextBoxColumn dgcCol = new DataGridTextBoxColumn();<br />
dgcCol.MappingName = "Child.Name";<br />
Code above does not work.
Am i doing something wrong here?
Thanks
|
|
|
|
|
First of all, don't prefix your classes with "C". This is an obsolete naming convention in the .NET Framework and all other CLI implementations. It's important to remain consistent with the .NET Framework because it is a RAD environment (Rapid Application Development). Have any of the classes you've used in the .NET Framework Class Library started with "C" (sans classes like CollectionBase or Control)? You won't find a single one. Read Naming Guidelines[^] for more information.
Second, you really should read about the DataGridTableStyle.MappingName property. See http://msdn.microsoft.com/library/en-us/cpref/html/frlrfSystemWindowsFormsDataGridTableStyleClassTopic.asp[^]. In it, it states that the DataGridTableStyle.MappingName must be set to the class name that the ArrayList - or just a simple array - contains. Your DataGridColumnStyle-derivatives then just contain the property name like Name.
The documentation above gives an example using a simple array, but an ArrayList works the same so long as you contain only one type (more than one type causes the first type to be used and any other types will not be bound).
This posting is provided "AS IS" with no warranties, and confers no rights.
Software Design Engineer
Developer Division Sustained Engineering
Microsoft
[My Articles] [My Blog]
|
|
|
|
|
hello,
I'm trying to take a string from a dialog box and pass it to another form, here's my code
password.cs
<br />
...<br />
private String tmpPassStore;<br />
...<br />
private void pass_ok_Click(object sender, System.EventArgs e)<br />
{<br />
tmpPassStore=this.passText.Text;<br />
Form1.changePass(tmpPassStore);<br />
}<br />
form1.cs
<br />
...<br />
public String DBPassword ;<br />
...<br />
public void changePass(String pwd)<br />
{<br />
this.DBPassword=pwd;<br />
}<br />
but at compile time, I receive the following error:
D:\Projects\myBusinnes\password.cs(120): An object reference is required for the nonstatic field, method, or property 'myBusinnes.Form1.changePass(string)'
why??? I pass an object of type string...
Thanks in advance
Paolo
|
|
|
|
|
The compiler doesn't complain about the string.
To call the nonstatic method "changePass" of your "Form1" class you need an object of this class.
www.troschuetz.de
|
|
|
|
|
and excuse me how do I fix that??
Form1 calls password's form creating a new instance of the password object, how do I tell password's one to relay to form1 object?? thanks
Paolo
|
|
|
|
|
2 options:
1) Pass a reference to Form1 into the password form
2) Pass a delegate into the password form allowing callback to Form1
|
|
|
|
|
It's not working because Form1 doesn't exist in the context of the Password form. "There is no reference to an object of type Form1."
In other words, in Form1, it created an object of type Password (form). Form1 knows everything public about the Password object. The Password object, on the other hand, knows nothing of the object that created it (Form1). As a rule of thumb, Parent objects create child objects, know everything about them, and can manipulate them. Child objects know nothing of the parents that created them and, hence, can't directly modify them.
3rd option... Create a Public field on the Password form and have Form1 look at that field and retrieve the string itself. Instead of trying to pass the string from the Password form to Form1, have Form1 pickup the string from the Password form.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Hello all,
I need to set the Initinal date in the DatetimePicker Control Blank not to today.
Thanks
Hay
|
|
|
|
|
It can't be blank. The DateTimePicker.Value is of a DateTime type, which is a value type. Value types cannot be null.
What you could do is make it appear that it has no value by using an empty DateTimePicker.CustomFormat property value and handling the ValueChanged event. When the Value changes to, say, DateTime.MinValue then set the DateTimePicker.Format to DateTimePickerFormat.Custom. Using a similar approach should give you the appearance of a blank date. You may need to use a value different from MinValue depending on the validation for the default DateTimePicker implementation. Whatever is outside the scope of your application would work.
This posting is provided "AS IS" with no warranties, and confers no rights.
Software Design Engineer
Developer Division Sustained Engineering
Microsoft
[My Articles] [My Blog]
|
|
|
|
|
Hello,
1) Create a Form
2) Add a TabControl
3) Add a AxWebBrowser Control on a TabPage
Run the app, everything works correctly.
Change the StartPosition property to WindowsDefaultBounds
Run the app, the form has strange dimensions  Why?!? 
Any idea?
Alberto Bencivenni
devDept Development Team Leader
Topology Optimization | Finite Element Method | Cad/Cam | OpenGL | Programming
|
|
|
|
|
hey...i have a bluetooth receiver attached to my PC's USB port. How can i access it through code...I wanna do things like search for devices in the raqnge, change the visible/invisible status, turn the device on on/off etc?
|
|
|
|
|
hey...could anyone tell me what are interface and how do u use them...eg Idisposable, Iserializable. Simplicity would be greatly appreciated.
Thanks
|
|
|
|
|
Interfaces are contracts that ensures your implementation (either a struct - though not a good idea, unless required because of boxing when casting to that interface - or a class or another interface) implements a certain method, property, or event. Read 13. Interfaces[^] in the C# Language Specification for more details, including the difference between implicit and explicit interface implementations.
As far as how to implement certain interfaces - or rather what they do - you really need to read in the .NET Framework SDK[^] what they do. Many of the topics in the SDK documentation give examples, and there's always more abstract documentation (about how to use Framework features, like serialization and the disposable pattern) if you read Programming with the .NET Framework[^].
Reading is important. Just guessing what they do would teach you the intricacies of how those interfaces work with other classes (like how IFormatter implementations use the ISerializable interface, and that Types must be attributed with the SerializationAttribute to be serializable - ISerializable just allows you to custom serialization of your Type).
This posting is provided "AS IS" with no warranties, and confers no rights.
Software Design Engineer
Developer Division Sustained Engineering
Microsoft
[My Articles] [My Blog]
|
|
|
|
|
Interfaces are the public methods/properties/events a class must have (exact same signature) in order to implement them.
For example, any class that implements IDisposable MUST implement 'public void Dispose()' method
You can cast any object into any interface it implements making it useful, among other many things, as a way of achieving polymorphism (dont know if thats the exact term in english).
|
|
|
|
|
Skynyrd wrote:
For example, any class that implements IDisposable MUST implement 'public void Dispose()' method
That's not the only option. You can also implement it explicitly, which is how the disposable pattern recommends:
public class MyDisposableClass : IDisposable
{
public MyDisposableClass() {}
protected virtual void Dispose(bool disposing)
{
if (disposing)
{
}
}
void IDisposable.Dispose()
{
Dispose(true);
GC.SuppressFinalize(this);
}
~MyDisposableClass()
{
Dispose(false);
}
}Skynyrd wrote:
You can cast any object into any interface it implements making it useful
That's not correct, either. You can cast any managed object to any managed interface it implements, but you can also cast any proxy object to any interface it may not implement in managed code if it is attributed with the ComImportAttribute. This tells the CLR to QI (COM's QueryInterface for the interface based on its compiler-generated IID (an interface GUID) - which should never be the case - or its GuidAttribute value (to remain fixed) - which is the highly recommend way of declaring interface (so that the IID never changes; for COM interop, this is required to actually refer to the interface your trying to QI for).
I know that's not the simple case the original poster was asking for, but it's still the correct information.
This posting is provided "AS IS" with no warranties, and confers no rights.
Software Design Engineer
Developer Division Sustained Engineering
Microsoft
[My Articles] [My Blog]
|
|
|
|
|
An interface is somehow like an abstract base class as it defines a set of methods, properties, events and/or indexers, which have to be implemented by inheritors, but doesn't provide an implementation for its members.
The big advantage of interfaces is the allowed multiple inheritance. So classes and structures can implement multiple interfaces and interfaces themself can inherit from multiple other interfaces.
If a class or structure implements an interface, it has to provide an implementation for all the interface members. E.g. if a class implemnts the IDisposable interface, it has to provide a Dispose method.
Does this help?
www.troschuetz.de
|
|
|
|
|
Certainly.
Interfaces are "standards" which every class implementing them has to meet.
If you had an interface "ICar", the classes "Ford" and "FIAT" both would implement "ICar".
Why? Because every car has to implement ICar, since ICar is the standard for cars.
This is so every car feels the same.
Even if you practised on a FIAT, the Ford still has Accelerator, Brakes, Engine, Transmission... which are defined in ICar.
If you choose to implement an Interface, you cannot implement only part of it - you have to go the whole way (the interface would be useless otherwise).
Say you want to create an application which is extensible via PlugIns. You would then define an interface for you plugin and application, so every plugin anyone writes fits into the "socket" on the application.
So, within that application, you can call "sendMessage" on every Plugin - but one Plugin may send the message via email, another one via FTP ...
I think you get the general idea 
Cheers
Sebastian
|
|
|
|
|
I'm trying to create a 2nd AppDomain for handling remotingserver stuff. What am I doing wrong here:
AppDomainSetup info = new AppDomainSetup();
info.ApplicationBase = "file:///" + System.Environment.CurrentDirectory;
AppDomain dom = AppDomain.CreateDomain("DataHandler", null, info);
BindingFlags flags = (BindingFlags.Public | BindingFlags.Instance | BindingFlags.CreateInstance);
ObjectHandle objh = dom.CreateInstance("CommunicationServer", "CCommunicationServer", false, flags, null, null, null, null, null);
Object obj = objh.Unwrap();
CCommunicationServer h = (CCommunicationServer)obj;
h.BeginRemoting();
Then I have the remoting server class which I have compiled as a dll:
public class CCommunicationServer : MarshalByRefObject
{
...
}
When I call dom.CreateInstance("...); I get an exception saying: Could not load type CCommunicationServer from assembly CommunicationServer.
Have I understod something wrong here? Should I use AppDomain.Load() or something? Can you please give me a basic example how to get a 2nd AppDomain running.
Thank you.
|
|
|
|
|
First of all, don't prefix your classes with "C". This is inconsistent with the .NET Framework. A good RAD (rapid application development) environment requires consistency. Read the Naming Guidelines[^] for more details. Hungarian notation is obsolete in the .NET Framework naming conventions (and CLI).
Is the CCommunicationServer class the fully-qualified class name? If it is defined within a namespace you must specify that as well. If you're getting a TypeLoadException then that indicates the assembly was loaded but the Type (your class) was not found. AppDomain.CreateInstance throws the FileNotFoundException when the assembly isn't resolvable. The documentation indicates as much.
You might also consider setting the AppDomainSetup.ConfigurationFile property to allow your application to use a .config file. These are more important than using them for Remoting configuration data as I mentioned in a previous post to you. You can also redirect assembly bindings and configure other runtime settins as well. It definitely leaves you open to other possibilities. And, once again, configuring your remoting server via a configuration file is far more flexible than hard-coding it. Read about the Remoting Settings Schema[^] in the .NET Framework SDK for more details.
This posting is provided "AS IS" with no warranties, and confers no rights.
Software Design Engineer
Developer Division Sustained Engineering
Microsoft
[My Articles] [My Blog]
|
|
|
|
|
Thanks. Adding the namespace did the trick. My next problem  is firing events from the 2nd appdomain to the "main" domain, and I'd like to know is that even possible, so that I don't waste my time?
And thanks also for the naming guidelines, I will check in to that. And now that I have the 2nd appdomain running, I will modify the remoteserver so that it'll use the configuration file. BTW, why is it so important to use AppDomainSetup.ConfigurationFile?
Thank you.
Here: ![Rose | [Rose]](https://www.codeproject.com/script/Forums/Images/rose.gif) Have a rose for you trouble
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
