C# Discussion Boards - CodeProject

Philippe Mori1-Jul-11 11:37

1-Jul-11 11:37

You need one abstration for an oscilloscope and another one for a channel. Then an oscilloscope would have an array (or a List<>, a Dictionary<>) of channels as one of its property.

Philippe Mori

faheemnadeem1-Jul-11 13:52

1-Jul-11 13:52

hi, thanks for the reply...
The problem is i need to implement the properties related to the channels in the inherited utility class.

e.g. if i try your approach... which i already did...

i made another abstract class and moved all the channel related properties to that class. e.g.

public abstract class Channel
    {
        [Category("IviScopeBase Capability Group")]
        [DefaultValueAttribute(false)]
        [DescriptionAttribute("If set to True, the oscilloscope acquires a waveform for the channel.  If set to False, the oscilloscope does not acquire a waveform for the channel")]
        public abstract bool ChannelEnabled { get; set; }

        [Category("IviScopeBase Capability Group")]
        [DefaultValueAttribute(false)]
        [DescriptionAttribute("Specifies whether channel is inverted or not")]
        public abstract bool ChannelInverted { get; set; }

        [Category("IviScopeBase Capability Group")]
        [DefaultValueAttribute(0)]
        [DescriptionAttribute("Returns the physical repeated capability identifier defined by the specific driver for the channel that corresponds to the one-based index that the user specifies.  If the driver defines a qualified channel name, this property returns the qualified name")]
        public abstract double ChannelName { get; }

        [Category("IviScopeBase Capability Group")]
        [DefaultValueAttribute(0)]
        [DescriptionAttribute("Specifies the input impedance for the channel in Ohms. Common values are 50.0, 75.0, and 1,000,000.0")]
        public abstract double InputImpedance { get; set; }

        [Category("IviScopeBase Capability Group")]
        [DefaultValueAttribute(0)]
        [DescriptionAttribute("Specifies the maximum frequency for the input signal you want the instrument to accommodate without attenuating it by more than 3dB")]
        public abstract double MaximumInputFrequency { get; set; }

        [Category("IviScopeBase Capability Group")]
        [DefaultValueAttribute(0)]
        [DescriptionAttribute("Specifies the scaling factor by which the probe the end-user attaches to the channel attenuates the input.  For example, for a 10:1 probe, the end-user sets this attribute to 10.0")]
        public abstract double ProbeAttenuation { get; set; }

        [Category("IviScopeBase Capability Group")]
        [DefaultValueAttribute(0)]
        [DescriptionAttribute("Specifies how the oscilloscope couples the input signal for the channel")]
        public abstract VerticalCoupling VerticalCoupling { get; set; }

        [Category("IviScopeBase Capability Group")]
        [DefaultValueAttribute(0)]
        [DescriptionAttribute("Specifies the location of the center of the range that the Vertical Range attribute specifies. The value is with respect to ground and is in volts")]
        public abstract double VerticalOffset { get; set; }

        [Category("IviScopeBase Capability Group")]
        [DefaultValueAttribute(0)]
        [DescriptionAttribute("Specifies the absolute value of the full-scale input range for a channel. The units are volts")]
        public abstract double VerticalRange { get; set; }

        [Category("IviScopeProbeAutoSense Extension Group")]
        [DefaultValueAttribute(false)]
        [DescriptionAttribute("If this attribute is True, the driver configures the oscilloscope to sense the attenuation of the probe automatically. If this attribute is False, the driver disables the automatic probe sense and configures the oscilloscope to use the value of the Probe Attenuation attribute")]
        public abstract bool ProbeAttenuationAuto { get; set; }
    }

Then i added an abstract list of channels to the VisaOscilloscope class as mentioned before.e.g.

public abstract List<Channel> Channels { get; set; }

Then i implemented the list in the utility class inheriting from "VisaOscilloscope" like this:

public override List<Channel> Channels
{
    get
    {
        throw new NotImplementedException();
    }
    set
    {
        throw new NotImplementedException();
    }
}

Can you please clarify as i declared all the properties in channel class abstract as well they need to be implemented as well. So where they are implemented. if i compile the above code i get no compilation errors.

What my other classes outside this hierarchy intend to do is:

VisaOscilloscope myScope = new VisaOscilloscope();
myScope.channels[0].Enabled = true;

How do i implement the properties of the channel object, as i have implemented base abstract properties in Visaoscilloscope in the utility classes inheriting from visaOscilloscope.

Will be really thankful if u can answer this.

Thanks for the help so far...

Philippe Mori1-Jul-11 15:16

1-Jul-11 15:16

Well the concrete channel class might have a reference to the containing scope if this is usefll for the implementation of the properties. This might be the case if the concrete oscilloscope class has functions like EnableChannel(int channelId, bool enabled).

One way would be that each oscilloscope fill its channel list with appropriate channels.

void InitChannels()
{
   List<Channel> newChannels = new List<Channels>

   int channelId = 1;
   newChannels.Add(new AnalogChannel(this, channelId));

   ++channelId;
   newChannels.Add(new AnalogChannel(this, channelId));
   
   int digitalChannels = 16;
   for (int i = 0; i != digitalChannels; ++i)
   {
      ++channelId;
      newChannels.Add(new DigitalChannel(this, channelId);
   }

   ++channelId;
   newChannels.Add(new ClockChannel(this, channelId);

   ++channelId;
   newChannels.Add(new TriggerChannel(this, channelId);

   // Update oscilloscope channels...
   Channels = newChannels;
}

Philippe Mori

faheemnadeem1-Jul-11 15:41

1-Jul-11 15:41

Yes you are right again...

What i have done till now is initialize the channel list in the utility class inheriting from visaoscilloscope. While implementing the 'init' method i populate the list with channels and their respective properties by connecting to the respective oscilloscope driver and getting real-time value of that property for that particular channel and correspondingly update the list.

This only happens once i call the init method the first time. The problem which i am trying to figure out is they way i have implemented the base oscilloscope properties is that they are connected to the driver itself in the gettter setters, so they give me the current realtime value of the oscilloscope attribute when they are called from let say my GUI class. e.g.

if i ask a visaoscilloscope for its ID. which is a general property has to be implemented by each oscilloscope. So i do from my gui class.

assume this scope object points to a particular utility/driver/scope

visaoscilloscope myscope = new visaoscilloscope();
string ID = myscope.ID;

the id field which is abstract in visaoscilloscope is implemented in the inherited utility class (because there are different ways of getting an ID for each driver and i have to connect a driver class to it also)

so in the ID implementation, i just do this.

public override string ID
        {
            get { return myTk.GetString(tktds1k2kProperties.IdQueryResponse); }
        }

Therefore it always gives me real-time response from oscilloscope. What i want is also realtime response for my channel properties. if i implement the current scenario u suggested the fields are only updated once i call the init method. which have to be called only once during the initialization phase.

If you understood my point i would be really thankful to hear a solution... if u want i can send u the classes... i know it is a simple enough problem. but this is something i have never tried and i am particularly new to this...

Really thankful for the help u have given my thus far...

Philippe Mori1-Jul-11 16:30

1-Jul-11 16:30

For each property you might decided where it is best to have the actual implementation.

I'm not sure how your data get updated and how it used.

You can uses events if you need to know when data is changed. In pratice, it might be simpler to detect changes at the oscilloscope level as you would need to connect to a single event that would contain information on the change. Thus it might be simpler if the actual implementation is in the scope (except if channel are mainly used independtly --- that is one view per channel --- in that case, events could be on each channel). It is possible to have both also.

Assuming that a TkChannel can be used only with a TkOscilloscope, they can easily share information or talk together either though functions or events.

Philippe Mori

faheemnadeem1-Jul-11 18:09

1-Jul-11 18:09

I think so its better if i give u the class implementations. a quick look will clarify u everything...
What i intend to do in a bigger picture is implement a experiment which uses two kinds of hardware an oscilloscope and an encryption board. i intend to measure power waves from the fpga board when an encryption is being done, collect its waveform and store it some where. this single step is called collecting a trace. i intend to do it almost a million times in a fast manner. and record a million waveforms acquired from oscilloscope somewhere.

The have made wrappers for the original oscilloscope driver written in c++ so they are compatible with c#. the drivers are all written, they specify to IVI standard and all the methods are implemented in a form of a class.

The class hierarchy i intend to implement for the experiment is:

IOscilloscope <---- Oscilloscope <----- Visa Oscilloscope <------ (TkTDS1012B , DSO1024)

The last classes e.g. tktds1012B connects to a driver class (e.g. tk1k2kDriver and connects to required methods it requires to get data from oscilloscope.

I am providing the links to these classes:
http://www.mediafire.com/?p3hzzcn2o45qucv

Kindly if u have some time, then have a look at it...
I just want a way to implement the properties for channel class they way i implement visaoscilloscope properties in inherited classes...

Thank you for your help thus far...

Philippe Mori2-Jul-11 3:30

2-Jul-11 3:30

I haven't look at your code. I don't even think I have a program to open RAR file...

Typically, I would think that you would also have:

IChannel <----- Channel <---- VisaChannel <---- ....

If the creation of the channel is done by the concrete oscilloscope, you can provide the concrete oscilloscope to the channel and from there you can do whatever you want. Handle it there, handle in parent channel class or handle it in the oscilloscope class (ideally through IOscilloscope but if you need you can also uses concrete oscilloscope classes).

The exact implementation depedds a lot on how much the implementation of channels are similar between oscilloscopes and also how existing code is implemented. Assuming that there is one driver class object for one oscilloscope that give access to channel and scope functions, then it would probably make sense that each concrete channel class would simple call the appropriate function in the corresponding scope.

Assuming that your channel do have an ID, you might have an interface IOscilloscopeForChannels that would be implemented by the oscilloscope for use by channels.

interface IOscilloscopeForChannels 
{
  bool IsChannelEnabled(string channelId);
  //...
}

Then a property from the channel simply call that method in the oscilloscope providing any passed argument and adding its owns ID.

You would then be able to use a channel like this:

var oscilloscope1 = GetTheOscilloscope();

/// Get a reference to the channel we want to uses
var channel3 = oscilloscope1.Channels["ch3"]; // Channels could be a dictionary

// Uses that channel in code.
// The channel might forward the call to the oscilloscope class.
channel3.IsEnabled = true;
AddToView(channel3.CurrentValue);
channel3.IsEnable = false;

Philippe Mori

faheemnadeem2-Jul-11 4:08

C# to MATLAB connectivity in windows 7

2-Jul-11 4:08

Thank you for your help. Really appreciated...

I will have a look at this approach and implement it.

Thanks again!!!

Sa na1-Jul-11 9:03

Sa na

1-Jul-11 9:03

Hello,
I am trying to connect c# with MATLAB. I used the deploytool in MATLAB to get the dll file to be used in my c# application. I followed the steps by step example from
MATHWORKS tells for its connectivity with c#[^].

After building my c# project, when I run, it stops working and shows run time exception as follows:

Unhandled Exception: System.TypeInitializationException: The type initializer for 'test.testclass' threw an exception. ---> System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT:0x8007000B)
at MathWorks.MATLAB.NET.Utility.MWMCR.mclInitializeApplication(String[] start
upOptions, Int32 startupOptionsCount)
at MathWorks.MATLAB.NET.Utility.MWMCR.InitializeApplication(String[] startupOptions)
at test.testclass..cctor()
--- End of inner exception stack trace ---
at test.testclass..ctor()
at mainApp_test.Program.Main(String[] args) in C:\Users\Abro\Documents\Visual
Studio 2008\Projects\mainApp_test\mainApp_test\Program.cs:line 44
Press any key to continue . . .

Can anyone help me solving this problem?

I am using MATLAB version 7.3, visual studio 8, windows 7 home premium, 64-bit operating system

my c# code is:

using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using test;
using MathWorks.MATLAB.NET.Arrays;
using MathWorks.MATLAB.NET.Utility;

namespace mainApp_test
{
class Program
{
static void Main(string[] args)
{
testclass obj = null;
double[] a = new double[1] { 10 };
double[] b = new double[1] { 33 };
MWNumericArray mwnA = new MWNumericArray(a);
MWNumericArray mwnB = new MWNumericArray(b);
MWArray[] result =null;
try
{
obj = new testclass();
result = obj.addMatlab(mwnA,mwnB);
MWNumericArray output = (MWNumericArray)result.ToArray();
Console.WriteLine(output);
}
catch(Exception)
{
throw;
}
}
}
}

Re: C# to MATLAB connectivity in windows 7

Dave Kreskowiak1-Jul-11 11:10

Dave Kreskowiak

1-Jul-11 11:10

You can start by going into your project Properties and, on the Build tab, the Platform Target has to be x86, not AnyCPU.

A guide to posting questions on CodeProject[^]

Dave Kreskowiak

Re: C# to MATLAB connectivity in windows 7

Sa na2-Jul-11 1:13

Sa na

2-Jul-11 1:13

I tried to change the platform target but it has no option except Active(Any CPU)
what to do now?

Re: C# to MATLAB connectivity in windows 7

Sa na2-Jul-11 2:52

Sa na

2-Jul-11 2:52

My problem is solved and now I got the result. Thanx Smile | :)

Is file mapping supported in microsoft .net framework

Danzy831-Jul-11 5:26

Danzy83

1-Jul-11 5:26

Some years ago I used to write code in Win32 API and there was a way for file mapping. I would like to know if there is file mapping technique in .net framework? If there is, how is it done? Thanks in advance.

Re: Is file mapping supported in microsoft .net framework

Ennis Ray Lynch, Jr.1-Jul-11 6:06

Ennis Ray Lynch, Jr.

1-Jul-11 6:06

Memory Mapped files were just added in 4.0 The class name is MemoryMappedFile but I have not used it.

Need custom software developed? I do custom programming based primarily on MS tools with an emphasis on C# development and consulting. I also do Android Programming as I find it a refreshing break from the MS.

"And they, since they Were not the one dead, turned to their affairs" -- Robert Frost

How do I monitor bytes per second written or read from a directory (and sub-directories)?

bbranded1-Jul-11 5:16

bbranded

1-Jul-11 5:16

Hello,

I wish to monitor bytes per second written or read from a directory.

Is something like this revealed by .NET framework, similar to that of FileSystemWatcher?

I am attempting to monitor I/O to the DfsrPrivate folder to better understand the I/O of the dfsr.exe process.

Thanks very much,

Matt

Re: How do I monitor bytes per second written or read from a directory (and sub-directories)?

Dave Kreskowiak1-Jul-11 7:14

Dave Kreskowiak

1-Jul-11 7:14

You can't monitor I/O speed based on a folder. The best you're going to get is to/from the entire disk or the I/O statistics for a process.

You'd use the PerformanceCounter[^] counter class and the appropriate performance counters to get the data you want.

A guide to posting questions on CodeProject[^]

Dave Kreskowiak

Re: How do I monitor bytes per second written or read from a directory (and sub-directories)?

bbranded1-Jul-11 9:10

bbranded

1-Jul-11 9:10

My work around is to use process monitor by the sysinternals dudes. Then parse the data.

With the proper filters in place, the log ("backing file") grows about 4MB/minute; which is manageable.

Process Monitor has a feature called File Summary (http://www.pcmag.com/slideshow_viewer/0,3253,l%253D248743%2526a%253D248736%2526po%253D13,00.asp?p=n[^]) which will summarize exactly what I want.

Now, I guess the question is, how does Process Monitor gather this information? It's likely via the processes; monitoring the process's handles and where they are reading and writing.

For me, this method, using Process Monitor, will do. However, it would still be interesting to investigate further ways to actually ways to grab the handles and identify their I/O.

Thanks,

Matt

Re: How do I monitor bytes per second written or read from a directory (and sub-directories)?

Dave Kreskowiak1-Jul-11 11:07

Dave Kreskowiak

1-Jul-11 11:07

Process Monitor does it by sitting over the file system I/O functions. The technique is called API Hooking. PM hooks a lot of functions covering I/O, Registry, Process, ... It maintains a huge database that is populated with the API call data. It can give you all the details on a per-process basis quite easily.

A guide to posting questions on CodeProject[^]

Dave Kreskowiak

question

ivan_go1-Jul-11 1:57

ivan_go

1-Jul-11 1:57

http://www.codeproject.com/KB/cs/tictactoewin32.aspx

why this code can't run in c# visual studio 2008 ??

please answer , i need your helped thanks

Re: question

Pete O'Hanlon1-Jul-11 2:19

Pete O'Hanlon

1-Jul-11 2:19

It's customary, with articles, to just ask on the article forum itself. After all, the author is usually best placed to judge what's wrong. I appreciate though that this is an extremely old article, so there's a good chance you won't get an answer from the author.

In this case, the answer is extremely simple. This article is written for a version of .NET that isn't supported in VS2008. Back in 2002, .NET was at version 1, and the minimum version that VS2008 supports is 2. Saying that, you could create a new project in 2008 and then copy parts of the code in from this version, bearing in mind that .NET2 introduced lots of improvements to the language such as generics.

Forgive your enemies - it messes with their heads

My blog | My articles | MoXAML PowerToys | Mole 2010 - debugging made easier - my favourite utility

Convert SQL Data Type To C#

Kevin Marois30-Jun-11 15:49

Kevin Marois

30-Jun-11 15:49

Is there a way in .Net to convert a given SQL data type to a .Net data type?

Everything makes sense in someone's mind

Not Active30-Jun-11 16:01

Not Active

30-Jun-11 16:01

It depends. Perhaps you could be a little more specific

I know the language. I've read a book. - _Madmatt

OriginalGriff30-Jun-11 22:08

OriginalGriff

30-Jun-11 22:08

Yes.
It's called casting[^]

Real men don't use instructions. They are only the manufacturers opinion on how to put the thing together.

Manfred R. Bihy: "Looks as if OP is learning resistant."

Shameel30-Jun-11 22:30

Shameel

30-Jun-11 22:30

Yes, there is a way. But unless you are more specific, it is difficult to get better answers.