|
Dear all,
I developed one application which collect the list of files in a directory after a comparison.
At the beginning I add the result into a datagridview but it seems I take too much virtual memory, for around 5 millions of file comparison.
I tried to write the list inside a text file but still the same problem.
So what I want to have is that how/what shoud I do to write the list of files after comparison directly into a text file (or list view) without taking too much memory.
Thanks for your reply
some piece of code would be appreciated.
|
|
|
|
|
It would appears that you're adding each filename to a list of some kind. If you don't want to use all that memory, you can't do that. Just write the information to the file as you find it, then don't add it to a collection of any kind.
|
|
|
|
|
Hi,
when you store all the file names somewhere (DataGridView, Array, List, ...) is does not scale well,
i.e. it works fine for small amounts, but starts to behave badly for large amounts; and disks could
hold millions of files. So try and avoid the need to have them all at once.
Example: say you want to compare the contents of two disks; there is NO need to first collect a list
of all the files, simply come up with a way to enumerate the files one by one in a predictable order,
now apply this same order to both disks. When they contain A+B+C+D+E+F+G and C+A+K+B+L you can't compare
them sequentially unless you enumerate in an ordered fashion, i.e. A+B+C+D+E+F+G and A+B+C+K+L,
these are easily comparable.
It you must have them all at once, try to keep the data to a minimum; for files and folders that
means don't hold the full path for each, just keep the name and a pointer to its parent. This may
save a factor of 2 to 5, which might be sufficient for your current needs, but again it does not
scale well, sooner or later you will run into trouble again.
|
|
|
|
|
Firstly, thanks for your prompt reply.
[Dave Kreskowiak]
Yeah this is what I want I think write the information directly as I find it, but I don't know how to make it.
[Luc Pattyn]
So you mean that I'll always get into trouble everytime I make my comparison ?
Let me explain to you first what my program do.
I have two servers with disk capacity around 7 To each.
The first one change everytime, 'cause it is like a transaction server, and second one is just for backing up the first one.
Let's say transaction server = 1A and backup server = 1B
Once someone made a transaction into 1A, it should be backed up to 1B but no need to delete files from 1B directly. Need to wait about two weeks and after that I should make a purge.
So my application is about purging files. Means that it compares first all files of the two servers and then lists those files before delete. It's at this level I'm into a trouble, making the comparison and then list all files.
So which solution should I adopt correctly ? Writing files directly inside a text file (by splitting if up to a specific size) or using a dictionnary or list... something like that. Or if have other solution I would appreciate it.
for information: my app is made with C# .NET 3.5
Thank you so much
|
|
|
|
|
AFAIK I already gave the complete answer. The key word is SORT.
One more detail, which should be obvious by now: use GetFiles/GetDirectories without implicit recursion, do the recursion yourself!
|
|
|
|
|
Yes, you're right. I'm going to change my app now.
It's more quick than before after sorting the file list with just a few number of files.
Many thanks for your help
|
|
|
|
|
hi,
I have and application which has 2 forms. The firts form has a textbox and a button which clicked opens a second form, which has just one button which clicked calls a method in the first form. The problem is, that the textbox doesn't update. There are no excpetion, when I set a break point the program goes into the line which updates the textbox but nothing happens. What is wrong?
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
}
public void add()
{
textBox1.Text = "Test";
}
private void button1_Click(object sender, EventArgs e)
{
Form2 f2 = new Form2();
f2.Show();
}
}
public partial class Form2 : Form
{
public Form2()
{
InitializeComponent();
}
private void button1_Click(object sender, EventArgs e)
{
Form1 f1 = new Form1();
f1.add();
}
}
|
|
|
|
|
You are instantianting a new Form1, this is not the existing Form1 that opened your second form. When the first form opens the second, it should provide a reference to itself that you can then use in the second form. Optionally, you can check the Owner/ParentForm properties or something like that, depending on how you show the second form.
public partial class Form2 :
Form
{
private Form1 _parentForm;
public Form2()
{
InitializeComponent();
}
public Form2(Form1 parentForm)
{
InitializeComponent();
this._parentForm = parentForm;
}
private void button1_Click(object sender, EventArgs e)
{
if (this._parentForm != null)
{
this._parentForm.Add();
}
}
In this example, your Form1 code is supposed to do something like:
Form2 form = new Form2(this);
form.Show();
Jean-Christophe Grégoire
|
|
|
|
|
Jean-Christophe Grégoire wrote: it should provide a reference to itself
Although this works and is a common method - it should not be encouraged. Form2 shouldn't know anything about Form1 and no method on it should be tied to an instance of a control that it hasn't created itself.
If it needs to broadcast information, it should use an event/delegate - in the same way that every other control does
DaveBTW, in software, hope and pray is not a viable strategy. (Luc Pattyn)Visual Basic is not used by normal people so we're not covering it here. (Uncyclopedia)
|
|
|
|
|
I certainly do agree, I didn't want to bother him
Jean-Christophe Grégoire
|
|
|
|
|
This should really be done with a delegate/event. I prefer using events for stuff like this. Form2 needs a new event that it can raise, and make you Form1 instance subscribe to it after it has instanciated it. If using an event you'll need a class derived from EventArgs to pass the data back.
This is the sort of idea.
using System;
using System.Windows.Forms;
namespace WindowsFormsApplication1
{
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
}
private void button1_Click(object sender, EventArgs e)
{
Form2 frm2 = new Form2();
frm2.ReadyToUpdate += new EventHandler<Form2.MyEventArgs>(frm2_ReadyToUpdate);
frm2.Show();
}
void frm2_ReadyToUpdate(object sender, Form2.MyEventArgs e)
{
textBox1.Text = e.Text;
}
}
}
using System;
using System.Windows.Forms;
namespace WindowsFormsApplication1
{
public partial class Form2 : Form
{
public event EventHandler<MyEventArgs> ReadyToUpdate;
public Form2()
{
InitializeComponent();
}
private void button1_Click(object sender, EventArgs e)
{
OnReadyToUpdate(new MyEventArgs("Test"));
Close();
}
protected virtual void OnReadyToUpdate(MyEventArgs e)
{
EventHandler<MyEventArgs> eh = ReadyToUpdate;
if (eh != null)
eh(this, e);
}
public class MyEventArgs : EventArgs
{
public MyEventArgs(string text)
{
m_Text = text;
}
private string m_Text;
public string Text
{
get { return m_Text; }
}
}
}
}
DaveBTW, in software, hope and pray is not a viable strategy. (Luc Pattyn)Visual Basic is not used by normal people so we're not covering it here. (Uncyclopedia)
|
|
|
|
|
Hi guys wonder if i can get a bit of help. I'm in the process of writing a word search style game in c#. I've managed to draw a grid and being able to highlight a cell within that grid. However where i'm getting stuck is creating the grid of letters. At the moment this is all purely aesthetic, there is no logic behind it yet. So any ideas on how to create a grid of letters to go into my drawn grid, would be most helpful.
Say i have a 5x5 grid what i want to be able to do is place a letter in each of those grid cells, so something like this:
a b c d e
a b c d e
a b c d e
a b c d e
a b c d e
I hope this makes sense and someone has an idea. I've included my code to draw my gridlines and highlight a cell in that grid below!
Regards
Vince
public partial class GUI : Form<br />
{<br />
private int gridWidth = 600;<br />
private int gridHeight = 600;<br />
private int squareSize = 20;<br />
private int maxCol = 60;<br />
private int maxRow = 60;<br />
private Color customColor;<br />
private Boolean[,] cellSelected = new Boolean[60, 60];<br />
<br />
public GUI()<br />
{<br />
InitializeComponent();<br />
}<br />
<br />
private void pictureBox1_Paint(object sender, PaintEventArgs e)<br />
{<br />
Graphics gfx = e.Graphics;<br />
this.customColor = Color.LightSlateGray;<br />
<br />
Pen myPen = new Pen(this.customColor);<br />
for (int i = 0; i <= this.gridWidth; i = i + this.squareSize)<br />
{<br />
gfx.DrawLine(myPen, 0, i, this.gridHeight, i);<br />
}<br />
for (int i = 0; i <= this.gridWidth; i = i + this.squareSize)<br />
{<br />
gfx.DrawLine(myPen, i, 0, i, this.gridHeight);<br />
}<br />
<br />
int cellRow = 0;<br />
while (cellRow < this.maxRow)<br />
{<br />
int cellCol = 0;<br />
while (cellCol < this.maxCol)<br />
{<br />
if (this.cellSelected[cellCol, cellRow] == true)<br />
{<br />
this.customColor = Color.FromArgb(100,100,100);<br />
<br />
SolidBrush myBrush = new SolidBrush(customColor);<br />
gfx.FillRectangle(myBrush, (cellCol * this.squareSize) + 1, (cellRow * this.squareSize) + 1, this.squareSize - 1, this.squareSize - 1);<br />
myBrush.Dispose();<br />
}<br />
cellCol++;<br />
}<br />
cellRow++;<br />
}<br />
}<br />
<br />
private void pictureBox1_MouseDown(object sender, MouseEventArgs e)<br />
{<br />
int xMouseCoordinate = e.X / this.squareSize;<br />
int yMouseCoordinate = e.Y / this.squareSize;<br />
this.cellSelected[xMouseCoordinate, yMouseCoordinate] = true;<br />
pictureBox1.Refresh();<br />
}<br />
<br />
private void pictureBox1_MouseMove(object sender, MouseEventArgs e)<br />
{<br />
if (e.X > 0 && e.Y > 0 && e.X < pictureBox1.Width && e.Y < pictureBox1.Height && e.Button == MouseButtons.Left)<br />
{<br />
double xMouseCoord = (e.X - 1) / this.squareSize;<br />
double yMouseCoord = (e.Y - 1) / this.squareSize;<br />
int xMouseCoordinate = (int)System.Math.Ceiling(xMouseCoord);<br />
int yMouseCoordinate = (int)System.Math.Ceiling(yMouseCoord);<br />
this.cellSelected[xMouseCoordinate, yMouseCoordinate] = true;<br />
pictureBox1.Refresh();<br />
}<br />
if (e.X > 0 && e.Y > 0 && e.X < pictureBox1.Width && e.Y < pictureBox1.Height && e.Button == MouseButtons.Right)<br />
{<br />
double xMouseCoord = (e.X - 1) / this.squareSize;<br />
double yMouseCoord = (e.Y - 1) / this.squareSize;<br />
int xMouseCoordinate = (int)System.Math.Ceiling(xMouseCoord);<br />
int yMouseCoordinate = (int)System.Math.Ceiling(yMouseCoord);<br />
this.cellSelected[xMouseCoordinate, yMouseCoordinate] = false;<br />
pictureBox1.Refresh();<br />
}<br />
}<br />
}
|
|
|
|
|
You can draw text using the .DrawString method. That would go in the _Paint handler;
int cellRow = 0;
while (cellRow < this.maxRow)
{
int cellCol = 0;
while (cellCol < this.maxCol)
{
if (this.cellSelected[cellCol, cellRow] == true)
{
this.customColor = Color.FromArgb(100, 100, 100);
SolidBrush myBrush = new SolidBrush(customColor);
gfx.FillRectangle(myBrush, (cellCol * this.squareSize) + 1, (cellRow * this.squareSize) + 1, this.squareSize - 1, this.squareSize - 1);
gfx.DrawString("X", this.Font, Brushes.Wheat, new Point(cellCol * this.squareSize, cellRow * this.squareSize));
myBrush.Dispose();
}
else
{
gfx.DrawString("X", this.Font, Brushes.Green, new Point(cellCol * this.squareSize, cellRow * this.squareSize));
}
cellCol++;
}
cellRow++;
I are troll
|
|
|
|
|
Hi eddy thats useful thanks, however i want to be able to set the letters myself, as at the moment this will paint an x in every cell. So say i want to have the word "hello" in the grid somewhere surrounded by random letters. The random letter thing, i think i've got an idea in, but without hard coding the actual word in, i'm not sure how to place the word in the grid somewhere?
|
|
|
|
|
Don't do that like that, compute the letters list where you want, give it to your "grid container" UserControl which it is supposed to know the list of "letter controls" that it contains. Loop in your letters list and give a letter to each sub-control. Each sub-control is supposed to have a stupid Text property, in which you can set the value of a label that would be docked full in your sub-control.
Really, don't put all this useless complexity like that.
Jean-Christophe Grégoire
|
|
|
|
|
Hi Jean-Christophe, i'm only quite new to C# and programming as a whole and i'm not really understanding what your meaning. Maybe a good see what you mean with some pseudo code or just initial code to get me on my way?
|
|
|
|
|
Okay sorry, give me some more time and I will mail you a sample project 
Jean-Christophe Grégoire
|
|
|
|
|
Thank you Jean-Christophe, i really appreciate your help. I think once i see what your meaning i will be able to get a grasp of it!
Many thanks
|
|
|
|
|
Hi VinceAshbySmith,
I made your sample project, how can I provide the zip file ?
Jean-Christophe Grégoire
|
|
|
|
|
Hi Jean-Christophe not sure if you got my email, so if you could send the code sample to vinny.as@tiscali.co.uk, that would be great!
|
|
|
|
|
string drawThis = "Hello world";
int cellRow = 0;
while (cellRow < this.maxRow)
{
int cellCol = 0;
while (cellCol < this.maxCol)
{
if (this.cellSelected[cellCol, cellRow] == true)
{
this.customColor = Color.FromArgb(100, 100, 100);
SolidBrush myBrush = new SolidBrush(customColor);
gfx.FillRectangle(myBrush, (cellCol * this.squareSize) + 1, (cellRow * this.squareSize) + 1, this.squareSize - 1, this.squareSize - 1);
if (cellCol < drawThis.Length)
gfx.DrawString(
drawThis[cellCol].ToString(),
this.Font,
Brushes.Wheat,
new Point(cellCol * this.squareSize, cellRow * this.squareSize));
myBrush.Dispose();
}
else
{
if (cellCol < drawThis.Length)
gfx.DrawString(
drawThis[cellCol].ToString(),
this.Font,
Brushes.Green,
new Point(cellCol * this.squareSize, cellRow * this.squareSize));
}
cellCol++;
}
cellRow++;
}
..and yes, there are more paths to Rome 
I are troll
|
|
|
|
|
You should try a more object-oriented approach, you are really complexifying your life. Split this code in multiple small elements responsible of a single responsibility. The rectangle that holds a letter is one object. If you make a UserControl for this simple responsibility, you can delegate the complexity of catching MouseEnter/MouseLeave/etc... events in the control itself. Via two small event handlers, you can highlight and unhighlight your control without having to determine any coordinate.
The "host" of you multiple rectangles is another UserControl. Its only responsibility is to put all the small rectangles in a bigger rectangle. Eventually, it computes the size that a single "letter rectangle" can have, as it knows it own size and the total number of smaller rectangles to put in itself.
And finally, generating letters is another responsibility. The generation of the letters occurs outside, is provided to the big UserControl, and it will instantiate the correct number of small rectanges, providing the text and the size.
Don't play with positioning that you compute yourself, use docking. All this code can be reduced to 10 lines.
Jean-Christophe Grégoire
|
|
|
|
|
Hi everyone,
I'm trying to read data from crt-310 card reader using serial port.
When I send "CARD_EJECT" command it does work. The problem is when I'd like to receive data from the reader.
There is a pdf file whihc is about communication protocol says;
First host sends STX command and if the reader returns ACK (positive answer) and host send ENQ command and the reader execute it and response.
Actually I didn't quite catch something about the protocol. How can I cope with it? Here is some code of it.
I'd like to keep this writing fairly brief, I'm not going to post all the methods like CalcBCC and ExecuteCommand which are below,
but if someone interested in I can send them also. Many thanks already.
public CRT310_DATA GenerateCommand(string commandName, _CARDEJECTTYPE cardEjectType)
{
CRT310_DATA data = new CRT310_DATA();
if (commandName == "CARD_EJECT")
{
data.bytCommmand = CMD_CARD_EJECT;
data.bytCommandParameter = (byte)cardEjectType;
data.intDataLength = 0;
data.bytTxDataBuffer = new byte[1];
data.bytRxDataBuffer = new byte[0x109];
}
return data;
}
public bool SendData(CRT310_DATA data, _CRT310_STATUS status, int intTimeout)
{
try
{
byte[] bytDataToSend = new byte[0x109];
int intDataLength = 0;
int intDataLengthToSend = data.intDataLength + 2;
bytDataToSend[intDataLength] = STX;
intDataLength++;
bytDataToSend[intDataLength] = (byte)(intDataLengthToSend >>;
intDataLength++;
bytDataToSend[intDataLength] = (byte)(intDataLengthToSend & 0xff);
intDataLength++;
bytDataToSend[intDataLength] = data.bytCommmand;
intDataLength++;
bytDataToSend[intDataLength] = data.bytCommandParameter;
intDataLength++;
data.bytTxDataBuffer.CopyTo(bytDataToSend, intDataLength);
intDataLength += data.intDataLength;
bytDataToSend[intDataLength] = ETX;
intDataLength++;bytDataToSend[intDataLength] = this.CalcBCC(bytDataToSend, intDataLength);
intDataLength++;
com.Write(bytDataToSend, 0, bytDataToSend.Length);
}
catch (Exception ex)
{return false;}
return true;
}
|
|
|
|
|
Hi,
I can't give you the solution to your problems, since it is a broad topic that needs lots of information
you did not provide, but I can give you some commments and suggestions:
1.
please show your code using PRE tags, that makes it easier to read and spot mistakes.
2.
I suggest you start using autoincrement as in bytDataToSend[intDataLength++] = data.bytCommandParameter;
that makes your intentions more clear and your code less error-prone.
3.
make sure your SerialPort initialization is correct; is there anything working? are some characters coming through in one direction? in the other?
4.
on your SendData method:
- parameter intTimeout is not used
- buffer size: what is the magical 0x109? you don't fill that many bytes in the array, but you
do send them (unless the driver discards the NULL bytes). Shouldn't the last parameter of com.Write
be intDataLength?
- you insert a 2B length at the beginning, are you sure adding 2 to it is correct?
- the data length gets handled by intDataLength += data.intDataLength;
this may or may not be correct, I don't know your data struct/class,
intDataLength += data.bytTxDataBuffer.Length would always be right.
5.
your SendData sends STX somedata ETX; your textual description of a read said
sending STX waiting for ACK then sending ENQ; that would not be possible based on the SendData
you have shown (but then maybe you don't use SendData where you implement Read).
BTW: ENQ is just a simple ASCII character, similar to STX and others.
Hope this helps.
|
|
|
|
|
Hi, Mr Pattyn
Yes, Card eject method works as I have mentioned in the first message (When I send "CARD_EJECT" command it does work...)
here is all;
CardReader class which you can easily copy and paste it and btnConnect, btnCardEject clicks too.
Many thanks for suggestions.
#region using
using System;
using System.Collections.Generic;
using System.Text;
using System.IO.Ports;
using System.Timers;
using System.Runtime.InteropServices;
using System.Threading;
#endregion
namespace ABCD
{
public delegate void CardDataReceivedEventHandler(byte[] bayt);
public class CardReaderCRT310
{
private SerialPort com = null;
private string comPort = "";
private int baudRate = 0;
private string parity = "";
private int dataBits = 0;
private string stopBits = "";
private bool isConnected = false;
public event CardDataReceivedEventHandler DataReceived;
// timer
private System.Timers.Timer tmr = null;
public string ComPort
{
get { return comPort; }
set { comPort = value; }
}
public int BaudRate
{
get { return baudRate; }
set { baudRate = value; }
}
public string Prty
{
get { return parity; }
set { parity = value; }
}
public int DBits
{
get { return dataBits; }
set { dataBits = value; }
}
public string SBits
{
get { return stopBits; }
set { stopBits = value; }
}
public bool IsConnected
{
get { return isConnected; }
}
public void Connect()
{
if (isConnected == true) return;
// create com port object
com = new SerialPort(ComPort, BaudRate, (Parity)Enum.Parse(typeof(Parity), Prty, true), DBits, (StopBits)Enum.Parse(typeof(StopBits), SBits, true));
com.ReceivedBytesThreshold = 1;
com.ReadBufferSize = 1024;
com.WriteBufferSize = 1024;
com.DtrEnable = true;
com.Handshake = Handshake.None;
com.DiscardNull = false;
com.Encoding = System.Text.Encoding.Default;
// open com port
com.Open();
isConnected = true;
// start poller timer
tmr = new System.Timers.Timer(200);
tmr.Elapsed += new System.Timers.ElapsedEventHandler(tmr_Elapsed);
tmr.Start();
}
public byte[] StrToByteArray(string str)
{
System.Text.ASCIIEncoding encoding = new System.Text.ASCIIEncoding();
return encoding.GetBytes(str);
}
public string BtyeArrayToStr(byte[] b)
{
System.Text.ASCIIEncoding encoding = new System.Text.ASCIIEncoding();
return encoding.GetString(b);
}
public char[] BtyeArrayToChar(byte[] b)
{
System.Text.ASCIIEncoding encoding = new System.Text.ASCIIEncoding();
return encoding.GetChars(b);
}
private void tmr_Elapsed(object sender, System.Timers.ElapsedEventArgs e)
{
// stop & process & start
try
{
byte[] ba = new byte[20];
string buffer = "";
string newData = com.ReadExisting();
if (newData != "" & newData.Length > 0)
{
tmr.Stop();
buffer = newData;
if (newData != null && newData.Length > 0) buffer += newData;
ba = new byte[buffer.Length];
ba = StrToByteArray(buffer);
if (DataReceived != null) DataReceived(ba);
}
buffer = "";
tmr.Start();
}
catch
{
}
}
[StructLayout(LayoutKind.Sequential)]
public struct CRT310_DATA
{
public int intDataLength;
public byte bytCommmand;
public byte bytCommandParameter;
public byte[] bytTxDataBuffer;
public byte[] bytRxDataBuffer;
}
private RX_FUNC rx_treat;
private _CRT310_STATUS rx_state;
private int rx_data_cnt;
private byte rx_BCC_calc;
private delegate bool RX_FUNC(byte bytDataIn, ref CRT310_DATA dat);
#region Private methods
private bool ExecuteCommand(ref CRT310_DATA dat, ref _CRT310_STATUS status, int intTimeout)
{
byte[] bytTxData = new byte[2];
bool blnFirstByte = true;
bool blnStop = false;
bytTxData[0] = 5;
this.com.DiscardInBuffer();
this.com.Write(bytTxData, 0, 1);
while (this.com.BytesToWrite > 0)
{
}
this.com.ReadTimeout = intTimeout;
this.rx_treat = new RX_FUNC(this.recieve_STX);
this.rx_state = _CRT310_STATUS.Busy;
while (!blnStop)
{
byte bytDataIn = 0;
if (this.recieve_byte(ref bytDataIn))
{
blnFirstByte = false;
blnStop = this.rx_treat(bytDataIn, ref dat);
}
else
{
if (!blnFirstByte)
{
status = _CRT310_STATUS.CharTimeout;
}
else
{
status = _CRT310_STATUS.MsgTimeout;
}
return false;
}
}
status = this.rx_state;
if (status == _CRT310_STATUS.Ok)
{
if (dat.bytCommmand != 0x4e)
{
return true;
}
status = (_CRT310_STATUS)dat.bytRxDataBuffer[0];
return false;
}
return false;
}
private byte CalcBCC(byte[] dat, int intLength)
{
byte bytBCC = 0;
int i = intLength - 1;
for (int intCharCnt = 0; intCharCnt <= i; intCharCnt++)
{
bytBCC = (byte)(bytBCC ^ dat[intCharCnt]);
}
return bytBCC;
}
private bool recieve_STX(byte bytDataIn, ref CRT310_DATA dat)
{
this.rx_BCC_calc = bytDataIn;
this.com.ReadTimeout = 100;
this.rx_treat = new RX_FUNC(this.recieve_NoRxBytesHO);
return false;
}
private bool recieve_NoRxBytesHO(byte bytDataIn, ref CRT310_DATA dat)
{
this.rx_BCC_calc = (byte)(this.rx_BCC_calc ^ bytDataIn);
this.com.ReadTimeout = 100;
dat.intDataLength = (byte)(bytDataIn << 0);
this.rx_treat = new RX_FUNC(this.recieve_NoRxBytesLO);
return false;
}
private bool recieve_NoRxBytesLO(byte bytDataIn, ref CRT310_DATA dat)
{
this.rx_BCC_calc = (byte)(this.rx_BCC_calc ^ bytDataIn);
this.com.ReadTimeout = 100;
dat.intDataLength += bytDataIn;
this.rx_treat = new RX_FUNC(this.recieve_command);
return false;
}
private bool recieve_command(byte bytDataIn, ref CRT310_DATA dat)
{
this.rx_BCC_calc = (byte)(this.rx_BCC_calc ^ bytDataIn);
this.com.ReadTimeout = 100;
dat.bytCommmand = bytDataIn;
this.rx_treat = new RX_FUNC(this.recieve_commandparameter);
return false;
}
private bool recieve_commandparameter(byte bytDataIn, ref CRT310_DATA dat)
{
this.rx_BCC_calc = (byte)(this.rx_BCC_calc ^ bytDataIn);
this.com.ReadTimeout = 100;
dat.bytCommandParameter = bytDataIn;
this.rx_data_cnt = 0;
if (dat.intDataLength > 2)
{
this.rx_treat = new RX_FUNC(this.recieve_data);
}
else
{
this.rx_treat = new RX_FUNC(this.recieve_etx);
}
return false;
}
private bool recieve_data(byte bytDataIn, ref CRT310_DATA dat)
{
this.rx_BCC_calc = (byte)(this.rx_BCC_calc ^ bytDataIn);
this.com.ReadTimeout = 100;
dat.bytRxDataBuffer[this.rx_data_cnt] = bytDataIn;
this.rx_data_cnt++;
if (this.rx_data_cnt == (dat.intDataLength - 2))
{
this.rx_treat = new RX_FUNC(this.recieve_etx);
}
return false;
}
private bool recieve_etx(byte bytDataIn, ref CRT310_DATA dat)
{
this.rx_BCC_calc = (byte)(this.rx_BCC_calc ^ bytDataIn);
this.com.ReadTimeout = 100;
this.rx_treat = new RX_FUNC(this.recieve_BCC);
return false;
}
private bool recieve_BCC(byte bytDataIn, ref CRT310_DATA dat)
{
if (bytDataIn != this.rx_BCC_calc)
{
this.rx_state = _CRT310_STATUS.Checksum;
}
else
{
this.rx_state = _CRT310_STATUS.Ok;
}
return true;
}
private bool recieve_byte(ref byte bytDataIn)
{
try
{
bytDataIn = (byte)this.com.ReadByte();
}
catch (Exception exception1)
{
return false;
}
return true;
}
#endregion
#region Enumarations
public enum _CRT310_STATUS
{
AbnormalCardLength = 6,
AckTimeout = 0xf4,
Busy = 0xf5,
CharTimeout = 0xf3,
Checksum = 0xf7,
CommandCanNotBeExecuted = 2,
CommandDataError = 4,
MsgTimeout = 0xf2,
Nak = 0xf1,
Ok = 240,
ParameterError = 1,
PowerSupply = 5,
UndefinedCommand = 0,
Unknown = 0xf6
}
public enum _CARDEJECTTYPE
{
CardEjectFrontHold = 0x31,
CardEjectFrontNoHold = 0x30,
CardEjectRearHold = 50,
CardEjectRearNoHold = 0x33
}
public enum _CARDSTOPTYPE
{
CardInStopFrontSideHoldCard = 0x31,
CardInStopFrontSideNoHoldCard = 0x30,
CardInStopInsideReaderICCardConnect = 0x33,
CardInStopInsideReaderICCardNoConnect = 50,
CardInStopRearSideHoldCard = 0x34,
CardInStopRearSideNoHold = 0x35
}
#endregion
#region Public connst (start-end etc, commands, command parameters, timeout values)
public const int STX = 0x2; // 'start char data package
public const int ETX = 0x3; // 'end char data package
public const int ENQ = 0x5; // 'sending require command
public const int ACK = 0x6; // 'positive answer
public const int NAK = 0x15; // 'negative answer
public const int EOT = 0x4; // 'cancel communication
public const int CRT310_RETRIES = 3;
// Commands
public const byte CMD_READ_DATA = 0x30;
public const byte CMD_CHECK_STATUS_OF_EACH_SENSOR = 0x31;
public const byte CMD_CARD_EJECT = 50;
public const byte CMD_CARD_STOP = 0x2e;
// Command Parameters
public const byte CMD_PRM_READ_DATA = 0x3A;
public const byte CMD_PRM_CHECK_STATUS_OF_EACH_SENSOR = 0x2F;
public const byte CMD_PRM_CARD_EJECT = 50;
public const byte CMD_PRM_CARD_STOP = 0x2e;
// Timeouts
public const int CMD_CARDEJECT_RESPONSTIMEOUT = 5000;
#endregion
public void CloseComport()
{
if (isConnected == false) return;
// stop poller timer
if (tmr != null)
{
tmr.Stop();
tmr.Dispose();
tmr = null;
}
if (com != null && com.IsOpen == true)
{
com.Close();
com.Dispose();
com = null;
}
isConnected = false;
}
public CRT310_DATA GenerateCommand(string commandName)
{
CRT310_DATA data = new CRT310_DATA();
if (commandName == "READ_DATA")
{
data.bytCommmand = CMD_READ_DATA;
data.bytCommandParameter = CMD_PRM_READ_DATA;
data.intDataLength = 1;
data.bytTxDataBuffer = new byte[3];
data.bytRxDataBuffer = new byte[264];
}
if (commandName == "CHECK_STATUS_OF_EACH_SENSOR")
{
data.bytCommmand = CMD_CHECK_STATUS_OF_EACH_SENSOR;
data.bytCommandParameter = CMD_PRM_CHECK_STATUS_OF_EACH_SENSOR;
data.intDataLength = 1;
data.bytTxDataBuffer = new byte[3];
data.bytRxDataBuffer = new byte[0x109];
}
return data;
}
public CRT310_DATA GenerateCommand(string commandName, _CARDSTOPTYPE CardStopType)
{
CRT310_DATA data = new CRT310_DATA();
if (commandName == "CARD_STOP")
{
data.bytCommmand = CMD_CARD_STOP;
data.bytCommandParameter = (byte)CardStopType;
data.intDataLength = 0;
data.bytTxDataBuffer = new byte[1];
data.bytRxDataBuffer = new byte[0x109];
}
return data;
}
public CRT310_DATA GenerateCommand(string commandName, _CARDEJECTTYPE cardEjectType)
{
CRT310_DATA data = new CRT310_DATA();
if (commandName == "CARD_EJECT")
{
data.bytCommmand = CMD_CARD_EJECT;
data.bytCommandParameter = (byte)cardEjectType;
data.intDataLength = 0;
data.bytTxDataBuffer = new byte[1];
data.bytRxDataBuffer = new byte[0x109];
}
return data;
}
public bool SendData(CRT310_DATA data, _CRT310_STATUS status, int intTimeout)
{
try
{
byte[] bytDataToSend = new byte[0x109];
int intDataLength = 0;
int intDataLengthToSend = data.intDataLength + 2;
bytDataToSend[intDataLength] = STX;
intDataLength++;
bytDataToSend[intDataLength] = (byte)(intDataLengthToSend >> 8);
intDataLength++;
bytDataToSend[intDataLength] = (byte)(intDataLengthToSend & 0xff);
intDataLength++;
bytDataToSend[intDataLength] = data.bytCommmand;
intDataLength++;
bytDataToSend[intDataLength] = data.bytCommandParameter;
intDataLength++;
data.bytTxDataBuffer.CopyTo(bytDataToSend, intDataLength);
intDataLength += data.intDataLength;
bytDataToSend[intDataLength] = ETX;
intDataLength++;
bytDataToSend[intDataLength] = this.CalcBCC(bytDataToSend, intDataLength);
intDataLength++;
byte[] newByteArray = new byte[intDataLength];
Array.Copy(bytDataToSend, newByteArray, intDataLength);
com.Write(newByteArray, 0, newByteArray.Length);
}
catch (Exception ex)
{
return false;
}
return true;
}
public bool CardEject(_CARDEJECTTYPE CardEjectType)
{
try
{
_CRT310_STATUS status = _CRT310_STATUS.Ok;
CRT310_DATA data = GenerateCommand("CARD_EJECT", CardEjectType);
if (SendData(data, status, 1000) == true)
{
Thread.Sleep(100);
if (this.ExecuteCommand(ref data, ref status, CMD_CARDEJECT_RESPONSTIMEOUT))
{
return true;
}
}
return false;
}
catch (Exception ex)
{
return false;
}
}
}
}
And I wrote something at the form side like;
CardReaderCRT310 cardReader = null;
private void btnConnect_Click(object sender, EventArgs e)
{
try
{
if (cardReader == null)
{
// connect card reader
cardReader = new CardReaderCRT310();
cardReader.DataReceived += new CardDataReceivedEventHandler(cardReader_DataReceived);
cardReader.ComPort = cmbPortName.Text;
cardReader.BaudRate = Convert.ToInt16(cmbBaudRate.Text);
cardReader.Prty = cmbParity.Text;
cardReader.DBits = Convert.ToInt16(cmbDataBits.Text);
cardReader.SBits = cmbStopBits.Text;
cardReader.Connect();
}
}
catch (Exception ex)
{
}
}
private void btnCardEject_Click(object sender, EventArgs e)
{
if (cardReader.CardEject(CardReaderCRT310._CARDEJECTTYPE.CardEjectFrontNoHold) == true)
{
//
}
cardReader.CloseComport();
}
Many thanks again.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
