|
I would guess that you will need to randomly choose a certain number of pixels within the brush area, and color them as needed. I think that the distribution function is uneven for that type of effect, so you should probably do something like picking a radius and and angle, then coloring that pixel. That way, the center has a higher probability of being colored than the outside. Good luck,
Sounds like somebody's got a case of the Mondays
-Jeff
|
|
|
|
|
You might want to google: Paint .NET, it is an entire drawing suite that I believe was written in VC#, if not VC# at least .NET. It is Open Source 
Regards,
Thomas Stockwell
Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning.
Visit my homepage Oracle Studios[ ^]
|
|
|
|
|
Hi All,
I have a win app with two forms involved. Form1 opens up Form2. When I go to close Form2 I want to refresh some grids on Form1. I tried setting up a custom eventhandler but its kind of hokey. I need some way to call a method in Form1 from Form2. Does anyone have the best way to do this? I passed a Form1 reference to Form2 and tried to see if a public method that I declared in Form1 was visible but doesn't show up. So I went with trying to create a custom event in Form1 and calling it from Form2 but not sure the best way to do this, any ideas?
Thanks,
JJ
|
|
|
|
|
A quick question. Is Form2 shown modally? If so, at the point the Form2 is closed (right after it is declared in whatever method Form1 instantiates it), that is where you can refresh your data.
If the above situation doesn't work for you, I would consider reworking the whole public method thing you tried. Perhaps you didn't pass reference of Form1 to Form2, instead, you passed reference to a regular System.Windows.Forms.Form.
Something like
public void OpenForm(Form myForm)
is NOT the same as
public void OpenForm(Form1 myForm)
because Form1 is the actual object that would have your method contained in it.
That is probably why you didn't see that method show up in your Intellisense list. (I don't know, I'm just taking a guess...)
Hope that helps.
|
|
|
|
|
|
In .net best thing to do this is through Delegates
|
|
|
|
|
How to change cursor?
This not working!
Cursor.Current = Cursors.Cross);
Thanks.
Alex
|
|
|
|
|
What is not working?
You might want to take the ) out of your code.
"The clue train passed his station without stopping." - John Simmons / outlaw programmer
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
|
|
|
|
|
try myForm.Cursor=Cursor.Cross;, each Control has a Cursor property.
Luc Pattyn [Forum Guidelines] [My Articles]
This month's tips:
- before you ask a question here, search CodeProject, then Google;
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get;
- use PRE tags to preserve formatting when showing multi-line code snippets.
|
|
|
|
|
Ah,ok! Thanks a lot!
Alex
|
|
|
|
|
I'm trying to implement AFORMAUTLib.dll in my C#, CSharp application. The DLL contains many interfaces, namely, CAcroApp, and CAcroAVDoc, each of which contain many methods, such as open(), Exit()...etc.
I've added the reference and implemented each interfact implicity like this:(yes, I implemented each method)
public class adobe : Acrobat.CAcroApp
{
#region CAcroApp Members
public int CloseAllDocs()
{
throw new Exception("The method or operation is not implemented.");
}
public int Show()
{
}
public class pdf : Acrobat.CAcroAVDoc
{
#region CAcroAVDoc Members
public int BringToFront()
{
throw new Exception("The method or operation is not implemented.");
}
public int Open(string szFullPath, string szTempTitle)
{
}
I've shown two methods for each interface (there are about 20 methods total for each interface) The methods contained exception handling, I removed the handling from Exit() and Open().
Now I'm stuck. I call the Open() method like this:
pdf pdfThis = new pdf();
pdfThis.Open("myPath", "tempName");
When I try to run the code I get the following errors:
Error 1 'WindowsApplication1.adobe.Exit()': not all code paths return a value
Error 1 'WindowsApplication1.adobe.Show()': not all code paths return a value
I don't understand what I am doing wrong. I am assuming this means I have to add code between the curly braces under the Open() and Exit() methods, but if that's the case, what's the point of accessing those methods, if they don't do anything on their own? I am completely lost. Any help would be greatly appreciated.
|
|
|
|
|
Hi,
an interface is like a contract, where you promise to provide certain methods and properties.
"implementing an interface" means providing code that fits the interface, so if adobe.Exit()
is part of the interfasce, then you have to provide all the code to make the Exit() method
do what it is supposed to do, one of the issues is whatever program flow is executed inside it,
it must return a value of the agreed upon type.
It may be wise to open your C# book and read up on interfaces...
Luc Pattyn [Forum Guidelines] [My Articles]
This month's tips:
- before you ask a question here, search CodeProject, then Google;
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get;
- use PRE tags to preserve formatting when showing multi-line code snippets.
|
|
|
|
|
Thank you for trying to help, however...I've read something very similar, or exactly the same, as your words at least 50 times before I posted, both in my C# books, and online. It just doesn't click...
I've got this interface that provides an Exit() method that does what? gives a place for me to add code for a program to exit (isn't that what the method is for)? That makes absolutely no sense to me. I don't understand the point of an interface that provides methods, if those methods do absolutely nothing except let you put code in and have it return an Int (in this case).
Why do I need an interface's Open() method to open a program if I've already supplied the code to do so?
what would I do with the return value?
Are there any real world examples of this? Something not generic like myprivatmethod accessed through mypublicmethod because that doesn't help me get it at all...
What am I not getting?
|
|
|
|
|
OK, I will provide a simple example about sorting collections, such as arrays, ArrayLists, etc.
The Array class has a static Sort method Array.Sort(Array) which is fine
when the array contains strings that you want sorted alphabetically. But maybe the items in the
array are not strings, or you need a special sort order.
The Array class also has a static Sort method where one of the overloads reads:
Array.Sort (Array, IComparer)
which means it needs an Array to be sorted, and an object that tells how to sort, by implementing
the IComparer interface, which defines a single method, like this:
int Compare (Object x,Object y)
Lets say my specific array contains objects of class Person which has a FirstName and LastName
property (bothpublic strings), and I want to sort them by LastName, and when equal by FirstName.
here is code that does exactly that:
class PersonSorter : IComparer {
public int Compare(object x1, object x2) {
Person p1=x1 as Person;
Person p2=x2 as Person;
int diff=string.Compare(p1.LastName, p2.LastName);
if (diff==0) diff=string.Compare(p1.FirstName, p2.FirstName);
return diff;
}
}
This is how we use the sorting object:
Person[] people=new Person[100];
Array.Sort(people, new PersonSorter());
Maybe in another occasion we have an ArrayList of Person objects, we can reuse the PersonSorter
to sort the ArrayList in the same way, since ArrayList too has a Sort method that takes an
IComparer to explain how to sort; this time its an instance method, so we would need:
myArrayList.Sort(new PersonSorter());
And later when we want to sort by FirstName first, we should create another class implementing
IComparer and pass an instance of that class to the Sort method of our collection.
The overall picture is: Array, ArrayList have been defined to work with IComparer (Microsoft
did not know about your Person class when they designed arrays and lists), all they care about
is the Compare method, so all you need to do is provide one; implementing an interface is
two things:
- providing the methods as specified in the contract
- telling the compiler you did so(by adding ": IComparer" to the class statement), so it can check things.
At first it may be surprising that we need a new class to explain how we want to sort; in fact,
we can add the Comparer method to an existing class. If there is only one way to sort the Person
class objects, we could add it in there. But sometimes it is wise to keep it separate.
On the other hand PersonSorter might contain more members and more methods, maybe it inherits
from another class (it could be a specialized Form, a calculator, whatever). As far as Array.Sort
is concerned, the only thing that matters is that it implements IComparer.
Luc Pattyn [Forum Guidelines] [My Articles]
This month's tips:
- before you ask a question here, search CodeProject, then Google;
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get;
- use PRE tags to preserve formatting when showing multi-line code snippets.
|
|
|
|
|
Hi Jason.
An interface does not "provide" a method, as your previous messages indicate you think. Instead, interfaces say that "this method is required" - the programmer must provide it.
This is what is happening your case. The creators of the CAcroApp and CAcroAVDoc are not providing you with Open() and Exit() methods; they are saying you MUST write an Open method and an Exit method.
Why? Well, the example that helped me was the old standard - the Bank application. Imagine you have an application representing a bank. Obviously, it will need to handle accounts, so you create the Account class that has some basic methods like Deposit(int amt), Withdraw(int amt), and GetBalance(). Now your team of programmers can derive any new type of account they need to create from the Account class:
public class Savings : Account {...}
public class Chequing : Account {...}
public class LineOfCredit : Account {...}
public class BigBusinessExpense : Account {...}
Wonderful. But you have an issue. Banking regulations require that you be able to examine every account to make sure there have been no fraudulent transactions!
Your first thought is that you will create a CheckForFraud() method for the Account class. But this won't work: what constitutes a possible fraud in a Savings account (e.g. a withdrawal > $10,000) may be perfectly valid in BigBusinessExpense accounts. And your programmers are creating new types of Account classes every week. You can't possibly write a single piece of code to check for all the possible types of fraud!
Your second thought is that you will just tell your programmers they have to add a method that checks for fraud. But now, how do you make sure that they did it? And there is nothing stopping John from creating a bool Checking.CheckForFraud() and Mary from writing int LineOfCredit.FraudCheck(). How do you keep it straight so that you know that no matter which account type you are accessing you will always know how to check for fraud?
That is what an Interface can do for you.
public Interface IFraudCheckable
{
bool CheckForFraud ( date StartCheckingFrom, date EndCheckingAt );
}
Now all programmers should declare their Account classes as implementing the IFraudCheckable interface:
public class Savings : Account, IFraudCheckable {...}
public class Chequing : Account, IFraudCheckable {...}
public class LineOfCredit : Account, IFraudCheckable {...}
public class BigBusinessExpense : Account, IFraudCheckable {...}
Note: the IFraudCheckable interface does not "provide" the CheckForFraud method. It says if a class implements IFraudCheckable then the class MUST provide a CheckForFraud method that takes two date parameters and returns a bool result.
Now, John and Mary are forced to create CheckForFraud() methods for their accounts. And you are happy because you know that no matter what type of bank account your application is looking at, it can always call CheckForFraud() to make sure you are meeting banking regulations.
I hope that helps you understand what an interface is and what it is used for.
Also note: An alternative is to make the Account class implement IFraudCheckable. That way your programmers don't have to change their class declarations, since they already derive them from Account. This is perfectly valid, but it will require you to provide a "dummy" CheckForFraud() in the Account class. To make sure your programmers can't use this dummy method and have to write their own, you declare it as abstract.
public class Account : IFraudCheckable
{
...
public abstract bool CheckForFraud ( date StartCheckingFrom, date EndCheckingAt ) {};
...
}
Again, you don't provide any code in Account's abstract CheckForFraud. The only reason you have one in Account is because you declared Account as implementing IFraudCheckable, and that means that Account MUST provide a CheckForFraud method that takes two date parameters and returns a bool result.
Clive Pottinger
Victoria, BC
modified on Wednesday, January 23, 2008 11:54:29 AM
|
|
|
|
|
Thank you both for your help and for taking the time to give it. I believe I've got a handle on the purpose of interfaces, however, I find them somewhat useless. I don't see why if my code works for my purposes, as in the code I provide in the methods I must implement such as open(), I even need the interface, other than the provider of the interface forcing me to utilize it if I chose to utilize their interoperability. I think a useful interface, for things such as opening a file, or showing a file, or opening an application, or closing an application, would provide methods that already provided that functionality based on specific parameters, such as a path string for a file location and name. In other words, if Adobe wants programmers who are utilizing their interop tool to be able to open a file the same way, consistently, every time( or check for fraud on a bank account), they would give a method that did just that and require you implement and use that. If it were something as abstract as fraud, which could be many things, the method being forced upon the user would limit you to checking for certain things, based on its' return value, or parameters, meaning it would be useless anyway if the fraud were something that couldn't be checked within the scope of that interface's forced implementation of a method. I just plainly don't see their usefulness.
|
|
|
|
|
I think I see your point, and both agree and disagree.
If I understand you correctly, you are saying that even though Adobe's use of an interface allows you create your own Open(), it still restricts what that method can do because it requires certain parameters be supported and only a certain type of result to be returned. Just as the IFraudCheckable interface limited the programmers to a boolean result.
True enough.
But is better than the Adobe guys forcing their idea of what Open() should do on you. Perhaps I have decided that Open() should open an XML document, find a tag with a URL in it and retrieve the file to be opened from there. No doubt no one at Adobe ever thought anyone would want to do that, and if they created the Open() method themselves, then I could never implement my "XML-based user-specific open-web-file" idea. Perhaps that is a silly example, but the idea is there: "we want something done, but we want our users to be able to decide how it is done".
Clive Pottinger
Victoria, BC
|
|
|
|
|
Wouldn't your example still be allowed if they specified what Open() meant? I mean, open would just open the document, the same way, every time, that shouldn't and doesn't eliminate a user from manipulating the app, or active doc once open...or does it... maybe it doesn't even matter. I've come to terms with interfaces. This site is excellent for intelligent input and I think my personal dislike of interfaces is not worth the time of any of us. But thank you all again for your help.
Jason
|
|
|
|
|
I feel like a monkey's ass. I get it now. I really really get it. Thank you all for your help.
I've never overcomplicated something so bad in my life. simple, almost too simple. wow....
Jason
|
|
|
|
|
Hi everybody,
I have a program that creates an image on a bmp image on mouse click and puts it in the point of clicking, just like "etap" program does.
THE PROBLEM IS
How can I save this big picture, which contains those small images, to a single file so that it opens automatically using my application when the user double click on it??
please I need URGENT help. 
thanks in advance>>>
|
|
|
|
|
AliNajjar wrote: please I need URGENT help
That is rather rude.
AliNajjar wrote: just like "etap" program does
What program is "etap"?
"The clue train passed his station without stopping." - John Simmons / outlaw programmer
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
|
|
|
|
|
Thanks anyway for your reply
etap is a program used for solving electrisity issues and problems
like load flow problem, using some mathematical equations and methodes like Newton-Raphoson for example..
I hope this reply would be useful and I hope to hear from you soon..
Thank you again>>
|
|
|
|
|
Use the BitBlt[^] windows API functions to copy the content of the screen into an image, then save and load the image as appropriate.
Sounds like somebody's got a case of the Mondays
-Jeff
|
|
|
|
|
Sorry Man,
I dont think this may work because
I need or want to change the location, as well as the parameters
of any image on the screen, so can you say this might help>>
thanks ..
|
|
|
|
|
Oh, I see. You need to keep a list of points and images, then serialize this list to the file when your user exits. On startup, load this file, deserialize the contents, then iterate through the list loading the images on the screen where appropriate. If the images can be layered, then the order of the list is important on serialization. Hope this helps,
Sounds like somebody's got a case of the Mondays
-Jeff
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
