|
I don't think it needs to be registered since it worked fine on the initial development machine without being registered. I just tried it anyways, and it says: LoadLibrary("savemat.dll") failed - The specified module could not be found.
Also, I forgot to mention that I wrote an additional dll that doesn't call into any external code (just a hello, world), and that works fine on all machines.
|
|
|
|
|
Run depends on it and see what DLL it can't find.
[My bad, didn't realize that this was the C# forum. Depends might not work on .NET assemblies]
Why is common sense not common?
Never argue with an idiot. They will drag you down to their level where they are an expert.
Sometimes it takes a lot of work to be lazy
|
|
|
|
|
I tried putting the dll I wrote into depends, and it's giving me some information, but I don't know what it means. In the tree view on the left hand side, it lists libmat.dll and libmx.dll underneath my savemat.dll, but libmx.dll is red.
In the column view to the right of that, when I click on libmx.dll, one of the functions listed has a red rectangle with a 'C' in it, but I don't know what that means. I looked through the help files, but couldn't really figure anything out.
Also, I don't understand why in depends, it lists things like libmat.dll instead of libmat.lib, which is what I originally linked with in savemat.dll.
|
|
|
|
|
You should start reading about static linking vs. dynamic linking.
When you're using a lib, you're copying the functions your program is using right into the binary.
When you're using a dll, you only include a reference in the application saying "call function number 3 from mysharedlibrary.dll".
In this case the application must be able to find mysharedlibrary.dll at runtime and every dll mysharedlibrary.dll is depending on.
In your case savemat.dll seems to be found but it cannot be loaded because libmx.dll cannot be found.
Regards,
mav
--
Black holes are the places where God divided by 0...
|
|
|
|
|
That's the thing that's so confusing to me!
I was using libs when I wrote the C++ library, and it seems like they're being copied into savemat.dll, since it's only like 20 lines of code, but it comes out at 220KB.
I'm really confused that depends would have dlls listed as dependencies of my dll since i didn't link to any dlls.
I'll have to double check all of this, so I don't look like a huge idiot... 
|
|
|
|
|
heloo guys..thanks alot u really doing agreat job ..any way i have finally created strings for each shape (lines,polygons,..) each string contains informations about the shape( x1,y1,x2,y2,R,G,B,pen width) ..Now how can i make my prog read from the text and draw the shapes ..as example the line string :
public void AddSv(Line l , ref string str)
{
if(drawwhat==1)// as one means lines
str +="1"+"\n"+l.First.X.ToString()+"\n"+
l.First.Y.ToString()+"\n"+
l.Second.X.ToString()+"\n"+
l.Second.Y.ToString()+"\n"+
l.Pen.Color.R.ToString()+"\n"+
l.Pen.Color.G.ToString()+"\n"+
l.Pen.Color.B.ToString()+"\n"+
l.Pen.Width.ToString()+"\n\n";
after i draw the line i click on save to send the informations to the text :
private void button1_Click(object sender, System.EventArgs e)
{
//save
System.IO.FileStream fs = new System.IO.FileStream("c:\\graphics.txt", System.IO.FileMode.OpenOrCreate, System.IO.FileAccess.Write, System.IO.FileShare.ReadWrite);
StreamWriter streamWriter=new StreamWriter(fs);
streamWriter.WriteLine(LineSv);
streamWriter.Flush();
streamWriter.Close();
fs.Close();
}
Regards;P;
|
|
|
|
|
Don't cross post
only two letters away from being an asset
|
|
|
|
|
mr jets wrote: Now how can i make my prog read from the text
System.Runtime.Serialization
led mike
|
|
|
|
|
thanks..but iam looking for the idea to make it reads line by line and draw the line ..should i use split fuction..or if condition..iam LOST!!
|
|
|
|
|
I know this so far...I must use using System.Runtime.InteropServices; Also, I must say the form class is COM visible like this [ComVisible(true)] .
What I don't understand is how I can call the javascript functions once I have done that. I tried this:
string path = Path.Combine(Path.GetDirectoryName(this.GetType().Assembly.Location), "VirtualEarth.htm");
webBrowser1.Navigate(path);
webBrowser1.Document.InvokeScript("loadMap()");
webBrowser1.Document.InvokeScript("goto_map_position(43.22, 45.56)");
However, all it does it load the intial page. It doesn't appear that the javascript function calls are working. Can anyone provide an example of how to do this.
Many thanks,
chance.
|
|
|
|
|
|
I must be doing something wrong, cuz I am testing out some this mechanism and I make a simple call to a Javascript function like this:
string path = Path.Combine(Path.GetDirectoryName(this.GetType().Assembly.Location), "VirtualEarth.htm");
webBrowser1.Navigate(path);
webBrowser1.Document.InvokeScript("doSomething");
function doSomething()
{
MsgBox("you suck");
map.HideDashboard();
}
Nothing happens.
|
|
|
|
|
What does mean 'Internal' and 'Protected Internal' for a class.
Durgesh Kumar Mishra
|
|
|
|
|
Internal means the type is only accessible from within the assembly it is defined in.
Protected Internal is simply a combination of the two class modifiers. We know that "internal" means the type can only be accessed from withing the assembly it is defined in. And we know that "protected" means it can only be accessed by the containing class or classed derived from the containing class. So, protected internal means the type can only be accessed by the containing class and derived classes that are included in the same assembly.
-- modified at 13:32 Thursday 17th May, 2007
|
|
|
|
|
protected internal means that the member can be accessed from the current assembly *or* derived classes (both conditions do not need to be true).
David Anton
www.tangiblesoftwaresolutions.com
Instant C#: VB to C# converter
Instant VB: C# to VB converter
C++ to C# Converter: converts C++ to C#
Instant C++: converts C# to C++/CLI and VB to C++/CLI
Instant Python: converts C# to IronPython and VB to IronPython
|
|
|
|
|
Ah. Right you are. My mistake.
Thanks!
Ian
Ian
|
|
|
|
|
Hi,
Modifier internal means that we can only access that class from the same assembly.
"protected internal" cannot be applied on class. But it can be applied on members. This means two things. It is either derived classes or classes in the same file that can access that member.
Manoj
|
|
|
|
|
manojkumarrai wrote: "protected internal" cannot be applied on class
It can if the class is nested within another class.
Ian
|
|
|
|
|
Thanks Ian.
I have not tried it. Bit I will use it when I can.
Manoj
|
|
|
|
|
hi all,
i want to compare the two versions of same software to update the lower one with higher one,
i could get the current version which is already installed in clients system by using reflection and now wants to fine and compare the version wich is in server?
could able to download the version that is there in my website,
but here i've strucked coz, i couldn't able to check the software version which is in server.
i got the current application version by using system.reflaction namespace's getCurrentassembly.fullname() property
please tell me how to find version of application which is in server.
do i need to write any xml or anything is my msi/setup please help me
prashanth,
s/w Engineer,
Syfnosys.
|
|
|
|
|
I have a C# app that wraps windows media player to play some streaming audio. I need a way to determine the sound level of the stream (Not the volume level that media player is set to). Any one know how to do this?
sean
|
|
|
|
|
Hello everybody,
I hope someone will be able to help me with something I have come across.
What I want to do is to recognize a specific object in a picture. I will process the image and we will suppose that the image is taken from the same distance at a certain interval of time (let's say with a webcam).
Now, what I have done is extracted all the objects from an image using Andrew Kirillov's Image Processing Lab (it can be found here on codeproject). However, the Image Processing Lab extracts Blobs, which are formed of the object I am interested and it is placed in a rectangle.
What I want to do is to extract ONLY the object and I have no clue on how to do that. Does anyone have any ideas ?
After that I want to compare that object with another one extracted from another picture.
Is there a way of comparing two pictures and searching for a certain object?
I guess I am looking for a simple shape recognition algorithm.
Please guide me on this,
Thank you very much,
OviDeus
|
|
|
|
|
Short and skinny version.
I am creating a application that will copy files from one location to another. There will be an option that allows the user to automatically delete the destination folder after a specified number of days. Before implementing this functionality I have been trying to delete the directory by hard coding the destination path. But each time I do only the files are deleted and the folders are left behind and I'm left with a IOException, telling me that access to the specified path is denied.
Any thoughts?
Freedom is the right to say that 2+2=5 if this is so everything else will follow.
|
|
|
|
|
There is an overloaded .Delete method that allows you to delete all subdirectories as well.
|
|
|
|
|
I have set the recursive to true:
DirectoryInfo asdf = new DirectoryInfo(temp.getDestination());
try
{
asdf.Delete(true);
}
catch(IOException d)
{
MessageBox.Show(d.ToString());
}
The folder that I am trying to delete contains a folder, which contains another folder, which contains another folder, which contains 12 files. The 12 files get deleted but the folder that contains the 12 files is the folder that the exception says access is denied on.
Freedom is the right to say that 2+2=5 if this is so everything else will follow.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
