C# Discussion Boards - CodeProject

rakesh_nits3-Jan-06 18:30

3-Jan-06 18:30

Hi Joe,
My mistake that I hadn't specified the process name "explorer.exe" in the process.now I am able to get the handle but process.kill gives the error that the process is already exited.and closeHandle does not do anything.using getlasterror i am getting the following error.
ERROR_MOD_NOT_FOUND
126 The specified module could not be found.
here is the code
static int WM_CLOSE = 0x0010;
string path = @"C:\Documents and Settings\rakesh\Desktop\A"
pr.StartInfo.CreateNoWindow = true;
pr.StartInfo.Verb = "Open";
pr.StartInfo.FileName = "explorer.exe";
pr.StartInfo.Arguments = path;
pr.Start();
//pr.Kill();//gives the error the process has already exited
iptr = pr.Handle;
SendMessage(iptr,(uint)WM_CLOSE,0,0);
int errorCode = Marshal.GetLastWin32Error();
Console.WriteLine("errorCode::"+errorCode.ToString());//gives errorcode 126
**************************************
Any help will be greatly appreciated.Thanks in Advance.
Rakesh

Re: Closing Window

joe carbone3-Jan-06 19:39

joe carbone

3-Jan-06 19:39

Hi Rakesh

if you set CreateNoWindow = true; you can see the explorer window?
if not, is difficult to close this process from code because the process don't have a window handle.
the only way is to find out the window handle from the
processID and then call the sendmessage function.

Re: Closing Window

rakesh_nits3-Jan-06 20:39

rakesh_nits

3-Jan-06 20:39

Hi Joe,
Yes I am able to see the window.and also i am able to get the process handle.but not able to close the window either using process.kill or sendmessage.when i set createnowindow to false ,I am able to use pocess.kill successfully.now it's working.Thanks a lot.
Rakesh

Re: Closing Window

rakesh_nits3-Jan-06 21:07

rakesh_nits

3-Jan-06 21:07

Hi Joe,
May be i replied too early.even in this case if i make the current thread sleep for some time again i get the same error that the process has been exited.actually what i want basically to open a window and close it after some time but the process.kill works only if i give it just after process.start or when the sleep time is so that the window does not show at all.Thanks in Advance.
Rakesh

Re: Closing Window

joe carbone3-Jan-06 22:29

joe carbone

3-Jan-06 22:29

hi rakesh

smile, the only way is to find out the window handle. tray this page

http://msdn.microsoft.com/vstudio/downloads/101samples/default.aspx

you find 101 c# samples in a msi file. this msi file contains a sample to find out all running processes in your system. download the right file, the page contains samples for both .net 1.1 and 2.0

Re: Closing Window

rakesh_nits4-Jan-06 23:35

rakesh_nits

4-Jan-06 23:35

Hi Joe,
thanks for the link.I have got the handle using enumWindows.but even after that i am not able to close it. i tried SendMessage , CloseWindow(according to documentation it only minimizes the window),DestroyWindow,EndTask and some more but even after all this i am not able to close the window.although i can kill the process (windows explorer in this case) by using TerminateProcess, but I just want to close the window.the windowhandle i valid as i am able to get the text of all windows using GetWindowText but while trying to close the window I am getting different errors.Again thanks for the marvellous link.
Rakesh

Re: Closing Window

rakesh_nits5-Jan-06 1:43

rakesh_nits

5-Jan-06 1:43

Hi Joe,
Thanks a lot.Finally i am able to do it using EndTask.Actually previously i was sending the third parameter fForce to true which kills the explorer instead of the task.But sending it as false closes the window.Thanks for all your help.
Rakesh

Re: Closing Window

joe carbone5-Jan-06 2:20

joe carbone

5-Jan-06 2:20

Hi Rakesh

this is a good message Smile | :)

.
if i can help you in other programming problems send me an email at:
joe.carbone@mymail.ch

Joe

Re: Closing Window

dbrenth21-Oct-08 9:48

dbrenth

21-Oct-08 9:48

I know this is along time ago. But I was wondering if you would post the code that worked for you. The links pointed to in this thread don't work any more.

Thanks

Brent

MSMQ

AB77713-Jan-06 1:50

AB7771

3-Jan-06 1:50

Hi all,
i have written a small program in which i want to check whether a
Queue exists and for this i used the Exists method of the MessageQueue
but i throws an Exception saying that
" Cannot determine whether a queue with the specified format name exists"

Anyone knows wht is the right way to check that

Thanks
Pramod

Re: MSMQ

S. Akif Kamal3-Jan-06 2:04

S. Akif Kamal

3-Jan-06 2:04

Can you specify the path of the queue you are using and whether this queue is on the same server as your application.

Akif

Re: MSMQ

AB77713-Jan-06 2:10

AB7771

3-Jan-06 2:10

the application is not on the server
i more thing is that i am not able to create a queue on the server
by executing the application from my machine

Thanks
Pramod

Re: MSMQ

S. Akif Kamal3-Jan-06 3:09

S. Akif Kamal

3-Jan-06 3:09

If you are using a private queue then the format of the path for the queue will be:

"FormatName:DIRECT=OS:machinename\private$\queuename"

and if you are using a public queue, then the format of the path will be:

"ServerName\QueueName"

but remember one thing, you cannot use a private queue in ActiveDirectory environment. It can only be used in workgroup environment.

Hope it will help you.

Akif

Re: MSMQ

AB77713-Jan-06 17:04

AB7771

3-Jan-06 17:04

The server which i am using is a XP professional machine
and it does not shows Public Queue,

I wanted to know whether i can create a private queue from my code
on that machine,

I created a queue manually by going to the computer management window,
but i want to check whether a specified queue exists or not
if not then it should be created

Is there a way to do that.

Thanks
Pramod

Re: MSMQ

S. Akif Kamal3-Jan-06 20:40

S. Akif Kamal

3-Jan-06 20:40

If it is a private queue then you can check whether it exists or not. You just need to use:

"FormatName:DIRECT=OS:machinename\private$\queuename"

as its path and then check IsExists property.

Akif

Re: MSMQ

AB77713-Jan-06 21:13

AB7771

3-Jan-06 21:13

i cannot find the isExists property

can u please send me the code

Thanks
Pramod

Re: MSMQ

S. Akif Kamal3-Jan-06 22:10

S. Akif Kamal

3-Jan-06 22:10

Use MessageQueue.Exists(QueueName) to check whether the queue exists or not.

Sorry;) it is not a property infact a static method.

There is a good article on the usuage of MSMQ. Check it out[^]

Akif

Re: MSMQ

AB77713-Jan-06 22:15

AB7771

3-Jan-06 22:15

i have already tried that but that throws an Exception
saying "Invalid Queue PAth name"

i am not able to check the existence of the Queue on the server

i am able to send and Receive msgs

Thanks
Pramod

Re: MSMQ

S. Akif Kamal4-Jan-06 0:04

S. Akif Kamal

4-Jan-06 0:04

"Exists cannot be called to verify the existence of a remote private queue"

Syntex of the QueueNamePath is:

Public queue: MachineName\QueueName
Private queue: MachineName\Private$\QueueName
Journal queue: MachineName\QueueName\Journal$
Machine journal queue: MachineName\Journal$
Machine dead-letter queue: MachineName\Deadletter$
Machine transactional dead-letter queue: MachineName\XactDeadletter$

Akif

Re: MSMQ

AB77714-Jan-06 1:08

AB7771

4-Jan-06 1:08

then how should one check whether a Queue exists or not
we cannot directly send or receive msgs whether checking the existence
of the queue

Thanks,

Pramod

Re: MSMQ

S. Akif Kamal4-Jan-06 18:09

S. Akif Kamal

4-Jan-06 18:09

You can go for public queues. In that case, you ll be able to check its existance.

If you want to use private queues, the dirty way of finding whether the queue exists is to create the queue with the path specified and then catching the exception. If the path is wrong, then its object will not be created and an exception will be raised.

Hope it will help you Smile | :)

Akif

Re: MSMQ

Ricardo Casquete24-Mar-09 19:43

Ricardo Casquete

24-Mar-09 19:43

Ugly but true

the biggest problem is the that you have to use a different "SYNTAX" when accessing the queue depending if you are reading / creating....
Basically to create the queue you have to use PATH NAME, tipically when you are reading you are using Format Name

<br />
instance.msmq   = new MessageQueue ( @"FormatName:DIRECT=OS:vircs-d2gs01\private$\InstrumentationQueue" );<br />
MessageQueue.Create ( @".\private$\InstrumentationQueue" );<br />

Good link about Queues names
http://blogs.msdn.com/johnbreakwell/archive/2009/02/26/difference-between-path-name-and-format-name-when-accessing-msmq-queues.aspx[^]

Ricardo Casquete

Re: MSMQ

Ricardo Casquete24-Mar-09 19:44

Ricardo Casquete

24-Mar-09 19:44

the biggest problem is the that you have to use a different "SYNTAX" when accessing the queue depending if you are reading / creating....
Basically to create the queue you have to use PATH NAME, tipically when you are reading you are using Format Name

<br />
instance.msmq   = new MessageQueue ( @"FormatName:DIRECT=OS:vircs-d2gs01\private$\InstrumentationQueue" );<br />
MessageQueue.Create ( @".\private$\InstrumentationQueue" );<br />

Good link about Queues names
http://blogs.msdn.com/johnbreakwell/archive/2009/02/26/difference-between-path-name-and-format-name-when-accessing-msmq-queues.aspx[^]

Ricardo Casquete

running caspol

navvara the infantryman3-Jan-06 1:48

navvara the infantryman

3-Jan-06 1:48

read my topic below to get a description to the problem i am trying to adress.

i wan't to run caspol so that it disables .net security, i've found an article stating that it should be run as :"caspol -security off" but how exactly d oi do this? is it a command line option? or what?

m$: It is normal for your screen to go blank and for your computer to restart itself several times

getting an Image from DataSet

Sasuko3-Jan-06 0:59

Sasuko

3-Jan-06 0:59

I've a database access with 1 OLE OBJECT field contained an Image.
I've queried the database the result is in the DataSet.
Now i would to get the image contained here:

myDataSet.Tables[0].Rows[i]["Image"]

how?

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.