C# Discussion Boards - CodeProject

Re: How to get first and last date given a year and a weeknr

livez9-Dec-09 20:06

livez

9-Dec-09 20:06

Ill try that, thanks!

Re: How to get first and last date given a year and a weeknr

livez9-Dec-09 23:00

livez

9-Dec-09 23:00

got it working with your suggestion (with a slight adjustment), thanks!

Re: How to get first and last date given a year and a weeknr

Abhinav S9-Dec-09 4:03

Abhinav S

9-Dec-09 4:03

Try this -

CultureInfo info = Thread.CurrentThread.CurrentCulture;
DateTime dt = info.Calendar.AddWeeks(new DateTime(YYYY, MM, DD), x); where x is no of weeks.

The interesting thing to note here is that if you use the first day of the first week of the previous year (i.e. 2008/12/28) evertything works fine. If you use new DateTime(2009, 1, 1),you would get that date plus 53 weeks which would not help you as per your query. Hope that makes sense Smile | :)

Re: How to get first and last date given a year and a weeknr

OriginalGriff9-Dec-09 4:04

OriginalGriff

9-Dec-09 4:04

DateTime does not appear to handle week of year at all - much to my suprise. Fortunately, I had to implement this for a real-time project many years ago. For the full rules, look for ISO-8601 which is the standard reference for dates and times, but:

1) Week number is 1 - 53.
2) Weeks start on Monday.
3) Week one is always the week with the first Thursday of the new year. I.e., if January the 1st is a Monday, Tuesday, Wednesday or Thursday, it is in week 1. Otherwise it is in the final week of the previous year (which could be week 51, 52, or 53 dependant on when week 1 was in that year).

Yes, this means that December 29th, 30th and 31st could be in Week 1 of the new year!

All those who believe in psycho kinesis, raise my hand.

Re: How to get first and last date given a year and a weeknr

David Skelly9-Dec-09 4:14

David Skelly

9-Dec-09 4:14

This might help:

http://en.wikipedia.org/wiki/ISO_week_date[^]

It tells you how to calculate the week number for any given date, so it shouldn't be too hard to "reverse engineer" it to come up with the date corresponding to a given week number.

Re: How to get first and last date given a year and a weeknr

livez9-Dec-09 4:17

livez

9-Dec-09 4:17

Thanks, Ill check it out!

Re: How to get first and last date given a year and a weeknr

Richard MacCutchan9-Dec-09 4:23

Richard MacCutchan

9-Dec-09 4:23

I already got my code to work.

Re: How to get first and last date given a year and a weeknr

David Skelly9-Dec-09 4:25

David Skelly

9-Dec-09 4:25

Richard MacCutchan wrote:
I already got my code to work.

Teacher's pet! Poke tongue | ;-P

Re: How to get first and last date given a year and a weeknr

Richard MacCutchan9-Dec-09 5:04

Richard MacCutchan

9-Dec-09 5:04

Yeah and I brought an apple today. Wink | ;)

How to make FolderBrowserDialog TopMost window.

Calla9-Dec-09 3:09

Calla

9-Dec-09 3:09

I have 'Form1' and 'Form2'. Form1 opens up Form2 and Form2 brings up a FolderBrowserDialog (called m_MyBrowser). For the folder strucure to show properly in fbd I have to open this dialog on a different thread like this:

Thread aThread = new Thread(new ThreadStart(ShowFolderBrowser));
aThread.SetApartmentState(ApartmentState.STA);
aThread.Start();

private void ShowFolderBrowser()
{
   m_MyBrowser.SelectedPath = string.Empty;
   if (m_MyBrowser.ShowDialog() == DialogResult.Cancel)
      return;
   else
      txtBxLocation.Text = m_MyBrowser.SelectedPath;
}

My problem is that I want the m_MyBrowser to be modal and top most (relative to Form2), but since I had to open it in another thread I can't get it to work by simply calling the ShowDialog() method.

Does anyone here have any ideas on how to get it modal?

Re: How to make FolderBrowserDialog TopMost window.

Calla9-Dec-09 3:20

Calla

9-Dec-09 3:20

I seem to have left my brains in the other pants...
ShowDialog(IWin32Owner) will do the trick. Blush | :O

Do not close ContextMenuStrip

eyalle9-Dec-09 2:14

eyalle

9-Dec-09 2:14

Hello,
i have a treeView component where a ContextMenuStrip is already assigned to it (ex. contextP)
now, i want to drag a node from one place to another in the treeView.
when i do so, i call the DragDrop event which has all my function's according to my needs.
in this event, i would like to call a different ContextMenuStrip named contextD.
i thought of using

<br />
.<br />
.<br />
.<br />
contextD.Show(Point pt);<br />
.<br />
.<br />
.<br />
<br />
private void        contextD_Opening(object sender, CancelEventArgs e)<br />
{<br />
  ToolStripMenuItem itemMove = (ToolStripMenuItem)contextDrag.Items["ctextMoveItem"];<br />
  ToolStripMenuItem itemCopy = (ToolStripMenuItem)contextDrag.Items["ctextCopyItem"];<br />
  ToolStripMenuItem itemCancel = (ToolStripMenuItem)contextDrag.Items["ctextCancelItem"];<br />
}<br />

but when the opening event has finished, the main code continues, and the contextD is still shown, regardless to my selection.

how can i make the contextD to stay on, depending on my selection in the menu to continue my flow (do event's etc.) ?
then of course, how to close it when im finished with it ?

thanks
Eyal

Re: Do not close ContextMenuStrip

BillWoodruff9-Dec-09 12:19

BillWoodruff

9-Dec-09 12:19

Hi Eyal,

I have a lot of experience working with TreeViews. Reading your description I can't really figure out what the relationship of the ContextMenuStrip and moving/copying/cancelling drag is in relationship to what you are doing with nodes.

Are you implying you want to put up a context menu strip during a drag operation : then let the user select move/copy/cancel from the context menu ?

If this is correct, would you want to put this context menu up at the moment the drag started (just after the call to 'DoDragDrop) ... or maybe when the drop target has been selected and DragDrop is being executed ?

Please describe further what your goal is here.

Using key combinations to determine whether a Drag Move or Drag Copy is being done is a fairly standard practice (usually detected in the source's ItemDrag event).

And, of course, you have the QueryContinueDrag event to use to allow cancelling in the DragSource's code in response to mouse or key events : [^]

best, Bill

"Many : not conversant with mathematical studies, imagine that because it [the Analytical Engine] is to give results in numerical notation, its processes must consequently be arithmetical, numerical, rather than algebraical and analytical. This is an error. The engine can arrange and combine numerical quantities as if they were letters or any other general symbols; and it fact it might bring out its results in algebraical notation, were provisions made accordingly." Ada, Countess Lovelace, 1844

Re: Do not close ContextMenuStrip

eyalle9-Dec-09 19:59

eyalle

9-Dec-09 19:59

Hello Bill,
thanks for your replay.
to be more accurate what i intend to do is after the drop target has been selected, then put up a context menu strip with the relevant options.
when the user selects copy for example, invoke the copy event which copies the source to the target..
and if the user selects cancel, do nothing
the event's are something i already have in my program, the only thing missing is this context menu strip option the will activate them properly.
have i made my self more clear ?
thanks a lot
Eyal

Re: Do not close ContextMenuStrip

BillWoodruff11-Dec-09 5:06

BillWoodruff

11-Dec-09 5:06

Hi Eyalle,

I think there is a "structural problem" here, but I have to disclaimer what I'll say by letting you know I'm working with a 3rd. party WinForms tree control whose behavior may be different than the standard WinForms TreeView, and I don't have time to go back and test against the standard WinForms TreeView.

The problem as I see it is the rather unique dynamics of drag and drop : first the control the drag is coming from continues to capture the mouse until Drop time.

Yes you can put up a context menu strip, or a menustrip, in the DragDrop of the drop-target control event, and set some global variable by selecting one of its items : the problem seems to be it runs on another thread : it's not modal : it doesn't block the rest of the code running in your DragDrop handler from proceeding : in fact, if you put a Console.WriteLine in your context menu selectItem code to print out your choice : you'll find it's written out after the DragDrop completes.

I have one prototype I wrote where I completely bypassed all of the regular WinForms drag and drop : in that prototype I was successful, in doing exactly what you are describing here (and with a much better drag-drop preview image, and a nice option menu that stuck around until you dismissed it). If I have the time I intend to publish that technique here on CP.

Perhaps one of our resident "gurus" will "weigh in" here with some wisdom Smile | :)

best, Bill

Re: Do not close ContextMenuStrip

eyalle13-Dec-09 20:38

eyalle

13-Dec-09 20:38

Hi Bill,
Thanks again for you're time.
it will be great if you will have the time to post that code, im sure it will help lot's of programmers..
Happy holiday's
Eyal

Re: Do not close ContextMenuStrip

BillWoodruff14-Dec-09 3:25

BillWoodruff

14-Dec-09 3:25

Hi Eyalle,

Happy Hanukkah !

eyalle wrote:
it will be great if you will have the time to post that code, im sure it will help lot's of programmers..

It will be a few months before I get to this, probably.

Consider the many benefits built into "native" drag-and-drop including (with effort) drag-dropping stuff from one application into another, interacting with the clipboard, the whole DataObject functionality built-in, dropping files or whatever to the desktop, etc.

best, Bill

Positioning MdiChild in the Parent Form

Randal Vance Cunanan9-Dec-09 2:14

Randal Vance Cunanan

9-Dec-09 2:14

Simple question:

How do I position an MDI child form inside the parent form when you call the child form?

Thanks.

Re: Positioning MdiChild in the Parent Form

Randal Vance Cunanan9-Dec-09 2:18

Randal Vance Cunanan

9-Dec-09 2:18

Nevermind. Found a solution.

Changed the startup position property of the childform to "Manual".
Then you can specify the Location of the childForm when it is created.

Any other way to do this?
Thanks.

classes as enum (or something like an enum)

Nathan Gloyn9-Dec-09 1:53

Nathan Gloyn

9-Dec-09 1:53

I'm working with a third party web service that exposes a status property on one of its classes but this property is in fact another class itself.

Whilst this is no great shakes I'm trying to make use of this web service easier for other developers in the company since the web service is abstracted away and we have our own adapter classes exposing just the properties/methods we need and I have been trying to come up with a way that will allow me to treat the status object much like a enum

What I would like to end up with is something like object.status = StatusAdapter.<value>
which would allow something along the lines of if(foo.Status == StatusAdapter.NotStarted){...}

Before anybody says 'simply use an enum' the reason I am not simply using an enum is that the status data that the web service object represents can be added to by a user at any time which means that I need to create all relevant classes required at run-time. If I used an enum I'd have to change the class library and re-deploy to all applications that use it.

I cannot use an interface as was suggested here [^] simply because the consumers of the class library will not be the ones extending the list of statuses they are just needing to use the statuses I provide.

Any ideas?

Re: classes as enum (or something like an enum)

Keith Barrow9-Dec-09 2:32

Keith Barrow

9-Dec-09 2:32

Nathan Gloyn wrote:
exposes a status property on one of its classes but this property is in fact another class itself

What do you mean by this excatly, is there a subtype-per-status (good OO, but exposing the problem of translating this to Web/WCF services)? If so the following code will be possible:

ReturnObjectType value =  Method();
if(value.Status is StatusType)
{
 ...
}

Method is the service method invoked
ReturnObjectType is the return type of the Service method call.
StatusType is the type of the status you are looking for.

CCC solved so far: 2 (including a Hard One!)
37!?!! - Randall, Clerks

Re: classes as enum (or something like an enum)

Nathan Gloyn9-Dec-09 3:11

Nathan Gloyn

9-Dec-09 3:11

No subtype just different property values.

But what I wanted to do is present to users of my class library the values in a form something akin to an enum so that if they create an object and need to set the status of it you wouldn't have to use some sort of 'magic string'

Re: classes as enum (or something like an enum)

Keith Barrow9-Dec-09 3:36

Keith Barrow

9-Dec-09 3:36

Pity.

The "magic string" effect is a consequence of [good] advice from Microsoft WRT to maintainability of the service. If they had exposed an enum, adding new values would involve re-gen'ing the client & rebuild, also the numeric values of the enums can change.

Really the message contract types aren't OO'd in the full sense, they are close to object like data bags.

To get round this problem we have converters to convert Data Contracts from the server to pukka objects on the client side. This can be automated with a bit thought.

CCC solved so far: 2 (including a Hard One!)
37!?!! - Randall, Clerks

Re: classes as enum (or something like an enum)

PIEBALDconsult9-Dec-09 5:10

PIEBALDconsult

9-Dec-09 5:10

Make a static class that exposes properties that are of the proper type?

public static class StatusWrapper
{
    private static StatusClass notstarted = new StatusClass ( whatever means not started ) ;

    public static StatusClass NotStarted { get { return notstarted ; } }

    ...
}


StatusClass status = StatusWrapper.NotStarted ;

Or, if that's too ummm... static... the wrapper could use a Dictionary to map enumerated values to the status type.

Re: classes as enum (or something like an enum)

Nathan Gloyn9-Dec-09 5:19

Nathan Gloyn

9-Dec-09 5:19

Thanks PIEBALDconsult both of those answers may be of some use, I must admit to leaning towards the dictionary simply because its a) simple b) can hold as many statuses as the user may want to create.

Admittedly not sure how the end developer may interact with the dictionary but perhaps thats me just being dumb as not coded it yet. Smile | :)

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.