|
Thanks Daniel,
Great reply! Two more comments,
1.
What is the differences between conversion and cast?
2.
When we unbox an object, it must be the same type of the original value type or could be different in some situations?
regards,
George
|
|
|
|
|
Here are some examples:
int -> long: compiles, can never fail at runtime
int -> object -> long: compiles (int->object is valid boxing instruction, object->long is valid unboxing instruction), but always fails at runtime because a box containing int cannot be unboxed to long
int -> object -> int -> long: compiles and works at runtime
int -> IComparable -> int: same as int -> object -> int
int -> string: fails with compile error, there's no conversion operator int->string (ToString is not a conversion operator), and there's no way this cast could succeed
int -> object -> string: compiles (int->object is valid boxing instruction, object->string is valid cast), but always fails at run time because a boxed int cannot be cast to string.
long -> int: compiles, but might fail at runtime when the long is too large and integer overflow checking is enabled
|
|
|
|
|
Thanks Daniel,
1.
Daniel Grunwald wrote: overflow checking is enabled
Enable this in compile or runtime? How to enable it? (I did this in unmanaged C++ before, but never did this in C# because I think C# will always check overflow.)
2.
Previously, I think object is the base type for int/long/... such primitive types. But now I think we should not say object is the base type for int/long/... such primitive types, it should be called boxing to object, right?
3.
int --> string does not work, because we can only box to object? Not box to other types?
regards,
George
|
|
|
|
|
What you did is perfectly okay with the compiler (sometimes you can't rely on automated systems - you simply have to "do it right"). If you had used the correct casting mechanism, it would have been fine. I almost never use (long)varName to cast. Instead, I use Convert.ToIn32(varName), which in your case would have yielded the expected value (100).
One other thing to remember - ALWAYS put a try/catch block around a Convert method, even if you simply eat the exception. You don't want your app crashing ungracefully.
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
|
|
|
|
|
Thanks John,
Good to learn Convert class from you. But should we use Convert.ToInt64 to convert to a long? 
regards,
George
|
|
|
|
|
No. Int32 is a long (in the traditional sense of the type).
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
|
|
|
|
|
John Simmons / outlaw programmer wrote: No. Int32 is a long (in the traditional sense of the type).
But we are not using the "traditional sense of the type". We are using C#, where the types are defined as:
int = System.Int32<br />
long = System.Int64
MSDN Library: Built-In Types[^]
Despite everything, the person most likely to be fooling you next is yourself.
|
|
|
|
|
Good to learn, thanks Guffa!
regards,
George
|
|
|
|
|
Compiler doesn't look at its value. Compiler just look at b's type. 'b' is casting to long, b is an object; So it allows to do it as it doesn't look at b's value.
Charith Jayasundara
|
|
|
|
|
Thanks Charith,
I am wondering what are the documented rules for compiler what to check and what not to check?
regards,
George
|
|
|
|
|
Hello Everyone...
I'm using this Barcode control form Codeproject Articles
http://www.codeproject.com/KB/miscctrl/barcodectl.aspx[^]
it is perfect, but I have faced a small problem with it, I've send a thread to the owner of this control but it seems like he is not available anymore, so I thought I might get help here...
My problem is that all the numbers in this control display only in English, no matter what I do...
I'm developing an Arabic application using "ar-SA" culture but still I see the numbers only in English format...
How can I solve this?
Please help...
Thanks in advanced...
Waleed
Thanks
|
|
|
|
|
Hi Guys. I am using DateTime.Today.ToString("ddMMyyyyhhmmss") as part of my file name. I get the correct date and hour returned but the minute and seconds seem to default to 0000. Any idea why?
StreamWriter sw = new StreamWriter(@"C:\SOLZ_PROV_" + DateTime.Today.ToString("ddMMyyyyhhmmss") + ".txt");
Excellence is doing ordinary things extraordinarily well.
|
|
|
|
|
Ah, yet again I have answered my Own Question.
DateTime.Now.ToString("ddMMyyyyhhmmss") seems to work just fine.
Excellence is doing ordinary things extraordinarily well.
|
|
|
|
|
Hi again,
four remarks this time:
1.
if you were to change the order to "yyyyMMddhhmmss" then the alphabetical order
would be the same as the chronological order, which makes life easier.
2.
you can embed some more characters in the date format string, the ToString() does not
mind about some characters such as an underscore. it just copies them to the output, e.g. I often use "_yyyyMMdd_hhmmss" to get a filename that is more readable.
3.
you don't have to try and do everything in a single line; splitting a statement in two
or three smaller statements yields more readable code, and facilitates debugging, since
now you can set breakpoints on the parts, and watch intermediate results.
4.
if your code is executed repeatedly, you might generate the same filename more than once,
since a modern CPU can do a lot in one second. Even adding milliseconds may be insufficient
since the milliseconds don't get incremented by one, as you might expect; instead they
increase by a larger number but at a lower frequency. For more on this, read my timers
article. A possible remedy is to insert a Thread.Sleep() so the time advances before
you have a chance to generate yet another filename (assuming single-thread use here).
|
|
|
|
|
Thanks Luc. In South Africa we use "ddMMyyyy" as date format. I wa using DateTime.Today which consistantly returned the correct date but the time as 120000 which is probably the start of the day. When I changed to DateTime.Now it returned the time correctly.
I expect to only create one file per day so I should be OK but I wanted to add the date time to show when the report was generated.
Luc Pattyn wrote: 3.
you don't have to try and do everything in a single line; splitting a statement in two
or three smaller statements yields more readable code, and facilitates debugging, since
now you can set breakpoints on the parts, and watch intermediate results.
I will take this advice and use it. I usually do that.
Thanks again mate. Much appreciated. I try and learn everyday and browsing the posts and Boards helps loads.
Excellence is doing ordinary things extraordinarily well.
|
|
|
|
|
It takes a little time to create a file, but the time it takes is enough to pretty much guarantee a unique name every time, especially if your code is performing exception handling (which it should), and properly closing the file (which it should). If you include the millisecond portion of the date time, you should be good to go. Besides, if you think there's a chance of it, the simple solution is to insert the line Thread.Sleep(25); just before you create the file. Doing so guarantees a unique filename using the date/time naming method, and it will introduce unnoticeable latency in your code.
If you don't really care what the file name is as long as it's unique, use a GUID for the name. A GUID is guaranteed to be unique no matter how many you create in a given second.
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
modified on Sunday, May 4, 2008 10:04 AM
|
|
|
|
|
Kwagga wrote: In South Africa we use "ddMMyyyy" as date format
Well, get out there and start teaching people about ISO 8601[^]
Think globally, act locally. 
|
|
|
|
|
You're welcome.
|
|
|
|
|
Good Day everyone,
Is it possible to get the total CPU and RAM usage of your application and display it on your form?
Thanks!
It is said that the most complex structures built by mankind are software systems. This is not generally appreciated because most people cannot see them. Maybe that's a good thing because if we saw them as buildings, we'd deem many of them unsafe.
|
|
|
|
|
|
Hey everyone,
Ever tried to extract text from your controls "say datagrid, text boxes or labels" and save in in a word file and format these data "colors and fonts" in the created word file??
ps. I found many third party tools on the internet, but I still need your suggestions guys before I start so please tell me how do you do it and what do you prefer to use![Rose | [Rose]](https://codeproject.global.ssl.fastly.net/script/Forums/Images/rose.gif)
Cheers
All generalizations are wrong, including this one!
(\ /)
(O.o)
(><)
modified on Sunday, May 4, 2008 1:57 AM
|
|
|
|
|
|
Ghee! Thanks!
All generalizations are wrong, including this one!
(\ /)
(O.o)
(><)
|
|
|
|
|
Can somebody please tell me how to make autorun.ini file and how coding can be done inside this file?
modified on Sunday, May 4, 2008 1:06 AM
|
|
|
|
|
I cant see how this's related to the C# forum or the subject of your post, but there you go..
[autorun]
OPEN=myprogram.EXE
ICON=myicon.ICO
And here is some useful link to start with
www.google.com
All generalizations are wrong, including this one!
(\ /)
(O.o)
(><)
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
