|
Hi!
Could anyone help me with my problem?
I have a VC++.Net project. Project specific defines and include paths are saved in an external file (response file) as compiler options. I use the file during compilation giving it by means of the @ compiler option that is provided through project properties: C/C++ -> Command Line -> Additional Options.
Now is the problem. After complete project build if I change the response file, the compiler does not note this and does not perform a new build. (In case of a make file this were simply 
Is it possible to include this file in the dependencies chain so that the compiler makes a complete build?
Perhaps there are other ideas how to get desired behaviour?
Thanks
Alexander Zauzolkov
|
|
|
|
|
I've followed the MSDN sample codes to read samples from a wmv file. But what's different is that I need to call SetRange() each time when I enter a while loop to grab only sample in a specific range (Ex: every 1 second). But even if I called INSSBuffer::Release() to release the buffer interface after calling IWMSyncReader::GetNextSample(), the memory seemd not release at once. I used the taskmgr.exe to peek my memory usage. Codes are as follows:
QWORD qwRange = 0;
int nIndex = 0;
while( qwRange < m_qwFileDuration )
{
QWORD cnsSampleTime = 0;
QWORD cnsDuration = 0;
DWORD dwFlags = 0;
DWORD dwOutputNum = 0;
DWORD dwLength = 0;
LPBYTE pBuf = NULL;
INSSBuffer* pMyBuffer = NULL;
HRESULT hr = S_OK;
UINT nIndex = 0;
hr |= m_pSyncReader->SetRange( qwRange,0 );
if( FAILED(hr))
return;
hr |= m_pSyncReader->GetNextSample( m_wStreamNumber,
&pMyBuffer,
&cnsSampleTime,
&cnsDuration,
&dwFlags,
&dwOutputNum,
NULL );
if( FAILED(hr))
return;
hr |= pMyBuffer->GetBufferAndLength( &pBuf, &dwLength );
if( FAILED(hr))
return;
memcpy( m_ppBuf[nIndex], pBuf, dwLength );
pMyBuffer->Release();
pMyBuffer = NULL;
qwRange += 10000000;
nIndex++;
}
First loop: SetRange() would increase the memory usage, GetNextSample() would further increase the memory usage.
After First loop: SetRange() would decrease the memory usage, but more than that of the previous loop, and GetNextSample() would increase the memory usage again.
After using taskmgr.exe and run my code in debug mode to examine the memory usage, I found the memory usage only changed after these 2 lines. If I tried to delete the local buffer pBuf after Realese() would result in a memory exception... Why and how to prevent memory leak? Can somebody help me? Thanks!
|
|
|
|
|
Instead of using Range Values, Try to get samples until the hresult from the GetNextSample method becomes NS_E_NO_MORE_SAMPLES.
Don't release the INSSBuffer until reading process will complete..
Thank u..
|
|
|
|
|
Hello,
Have you used CPreviewWnd in CPropertySheet component? If so please explain abit, as the onpaint draw an elipse with little other documentation.
NNP
"Naked we come and bruised we go."
- James Douglas Morrison
Best Wishes,
ez_way
|
|
|
|
|
I need to sending data to keyboard through the keyb controller, because a device are connected to ps/2 port (emulating enchanced keyb). I need TO SEND data from PC to that device.
There is any way to do it in windows xp without using device drivers? has windows xp a generic device driver that could help me in this task? Direcx?, VC++.NET? any idea?
Any help will be welcome!
|
|
|
|
|
Hello, I was wondering if anyone has tried to put a button on a tab control? Basically I have a MDI application and I'm using a MDI tab control that was made by Dundas Software (I think) anyway I would like to put a "x" close button on the tab, that would allow a user to close that document if the button was clicked instead of going to the default windows spot to close the document. I have never tried to do anything like this before and was wondering if anyone has had experience doing something similar? Or if someone maybe saw how to do it somewhere on the net and could provide a link?
Thanks,
Rob
Whoever said nothing's impossible never tried slamming a revolving door!
|
|
|
|
|
I’ve got a problem. That is, when we use those Windows APIs,such as SetupDiGetClassDevs() and SetupDiEnumDeviceInterfaces(),
to enumerate all the instances of the usb device class, what I wanna make sure are the answers to these questions:Is there a certain
rule which determines the order of all the instances which are enumerated? In other words,If we can depend on a certain rule to
foreknow which device instance will be enumerated first,which will be the next and which will be the last? If there is,then what
it is? If not,how can we let the first attached one be first enumerated,the next will be next,and the last will be last?
|
|
|
|
|
momer wrote:
Is there a certain rule which determines the order of all the instances which are enumerated?
No. It may be the order in which they were found/attached, but may not be. Don't depend on it.
momer wrote:
If not,how can we let the first attached one be first enumerated,the next will be next,and the last will be last?
No idea. Sorry
Ryan "Punctuality is only a virtue for those who aren't smart enough to think of good excuses for being late" John Nichol "Point Of Impact"
|
|
|
|
|
I'm using Visual Studio .Net to create an application that uses HTML help. In general, I am having a really hard time finding good documentation on how this works. The MSDN library is a nightmare to navigate through and is not helping me much at all.
Here is my current problem. I can't seem to find a good description for or get a good feel for how all of the files work together. There is an HTMLdefines.h file. Then there are the .hhc, .hhk, .hhp files. Then the .chm file is the compiled output file. I have no problem with the basic editing of the help files and compiling them.
In my main application, pressing f1 over almost every menu item works and brings up a help window. I have no idea how because I never did anything specific for this to happen. I didn't even write a function handler to do this. Somehow this was all taken care of by the app wizard. There are two menu items; file-open and help-topics where when I press F1, I get an error message: "can't open help". I don't even know where to begin troubleshooting this since it is not even being done in my code. Somehow there must be some broken links in my help files in the hlp directory but I don't see them. At first glance all seems to be well. When I press help-topics, the .chm window is displayed fine and I have navigated through my help with no broken links. So what gives? Where can I find a book or some good documentation or research papers on how all of the files fit together so that I can solve this problem?
Thank you!
|
|
|
|
|
|
Iam new to VC++. I need to make a dialog based mfc app which has 5 radio buttons.i need to pass in a list of 6 labels.the dialog should be able to display a list of radio buttons that are labeled with the parameters passed in. i should then return which label was selected.
can someone give a simple app which does this? Need urgently.
|
|
|
|
|
RESPECTED SIR / MADAM
PLEASE HELP ME I HAVE REQUIRED A SIMLE AND EASY PROJECT DESIGN IN MFC VC KINDLY SEND ME SOME PROJECTES LIKE DATABASE, INVENTORY, SHOPE , OR SIMPLE EASY ANY OTHER PROJECT CODE.
THANK YOU VERSY MUCH.
|
|
|
|
|
What's your IDE? VC++6.0 or VC++ .NET?
First, you should set the tab order of these radio buttons in successive order. ( Ex: 1,2,3,4,5 ) Next, you should "Group" your radio buttons by setting the least tab order one's property "Group". Check the property "Group" in VC++ 6.0 or set the property "Group" "True" in VC++.NET.
The next step depends on how you input your parameters. You can use some member variables to save your "parameters". To lable the radio buttons dynamically, use CWnd member function such as
SetDlgItemText( IDC_RADIO1, pszString /*Some LPCTSTR or CString*/);
or
SetDlgItemInt( IDC_RADIO1, nInt/*Some Integer*/ );
Next, you can double click each radio button or use class wizzard to write its BN_CLICKED event handle function. After you've generate 5 event handler, you can handle jobs you wanna do ( such as set a integer member to a value specified which button was pressed ) for each button. Good Luck!
|
|
|
|
|
This is not a place for having your class assignments completed. Better spend some bucks and go to rentacoder.com for this.
<marquee> STUCK STUCK STUCK STUCK
Stuck to Programming through an unbreakable bond
My Articles | My Blog
|
|
|
|
|
I need an installation software to install my program (a set of files).
could u recommend a better one?
thx
includeh10
|
|
|
|
|
yeah you can go for INNO setup,it very good freeware Installer around.
you can download it form Jrsoftware.org
-----------------------------
"I Think It Will Help"
-----------------------------
Alok Gupta
visit me at http://www.thisisalok.tk
|
|
|
|
|
Download ISTool from below site
http://www.istool.org/default.aspx/downloads
Download InnoSetup from below site
http://www.jrsoftware.org/isinfo.php
Install both (one is compiler and other is editor).
Run ISTool from Start->Programs->ISTool4->ISTool
GoTo File->Preference, and select Innosetup installed directory as Compiler directory and click Ok.
Then "Files and Dirs" from the left side tree. Right click the rihgt side window and select "New Item", This will show a dialog, from this dialog you can browse your file, and give the destination dir while installing, etc.
Do the same for adding more files.
Go to Project->Setup Option->Compiler and give the ouput directory, setup name etc.
then compile the setup using Project->Compile Setup , this will give you an installation exe.
|
|
|
|
|
Thanks for u 2.
I am downloading them now.
cheers
==============================================
I modify the message.
InnoSetup is really wonderful!!!!!!!!!!!!!!
thanks a lots.
includeh10
|
|
|
|
|
I am trying to compile my code that was created VC++ 6.0 with MFC into VC++ 7.0. I am having a few problems. Any help will be greatly appreciated.
1. I am having trouble with templates.
I have following template class
template<class base_type="CWnd">
class CColorCtrl : public BASE_TYPE
{
..
..
}
I get an error C2039 : _GetBaseMessageMap is not a member of CColorCtrl<base_type>
BEGIN_TEMPLATE_MESSAGE_MAP(class BASE_TYPE, CColorCtrl<base_type>, BASE_TYPE)
//{{AFX_MSG_MAP(CColorCtrl)
..
..
//}}AFX_MSG_MAP
END_TEMPLATE_MESSAGE_MAP()
2. I have built Regular DLLs using MFC Dlls which I compiled in 7.0 when I use them with an .EXE that does not have threads, they work fine but when I use them with an .EXE that uses many threads, the .EXE fails at run time, at different places depending on how much work I have in each thread. When I block a lot of functionality and have only a few threads running, the application runs fine but the more threads run at the same time, the application fails for no paritcualr reason at any unreasonable points.
Also, can anyone point me to a website that has information about Migrating with no warnings for the size changes of different data types.
Thank you.
|
|
|
|
|
Hi, did you solve the problem with _GetBaseMessageMap in VC7? I ran into the same problem.
|
|
|
|
|
I have Created a simple dialog based application , which contains a Single Cedit control , I have Set the Data of CEdit Control with the SetWindowText supppose "Hello World" in the OnInitdialog( ) , AS I run the Program , the dialog appears containing CEdit control and the CEdit Control has the Text "Hello World" , but this text is highlight which is with Blue BackGround , What I want is to Remain CEdit Control in focus but the Text inside the control should not be highlighted ?
I would be very hwlp ful to you ppl if you help me out of this delimma !
thanx
- Nabil
|
|
|
|
|
Add m_myEditCtrl.SetSel (-1, 0); to OnInitDialog().
/ravi
My new year's resolution: 2048 x 1536
Home | Articles | Freeware | Music
ravib@ravib.com
|
|
|
|
|
BOOL CKillFocusEditBoxDlg::OnInitDialog()
{
CDialog::OnInitDialog();
// Set the icon for this dialog. The framework does this automatically
// when the application's main window is not a dialog
SetIcon(m_hIcon, TRUE); // Set big icon
SetIcon(m_hIcon, FALSE); // Set small icon
// TODO: Add extra initialization here
CMyEdit* pEdit = (CMyEdit*)GetDlgItem(IDC_EDIT1);
CWnd* pWnd = (CWnd*)pEdit ;
pEdit->SetWindowText("Hello I am back");
pEdit->SetSel (-1, 0);
return TRUE; // return TRUE unless you set the focus to a control
}
Sorry guys , I m still facing the same problem with this Code , but I have find a to do my JOB the Code I have implemented to solve this problem is :
BOOL CKillFocusEditBoxDlg::OnChildNotify(UINT message, WPARAM wParam, LPARAM lParam, LRESULT* pLResult)
{
// TODO: Add your specialized code here and/or call the base class
CEdit* pEdit = (CEdit*)GetDlgItem(IDC_EDIT1);
pEdit->SetSel (0, 0);
return CDialog::OnChildNotify(message, wParam, lParam, pLResult);
}
Any ways , I thankful to you guys , you are great help to me .
- Nabil
|
|
|
|
|
when you want the cursor in a certain position, call the CEdit member's SetSel() with the parameters being the same number. For instance, if you want the cursor to be at the first position of the text box,
m_ctlEdit.SetSel(0,0);
if you want it to be at the end of the text,
CString str;
m_ctlEdit.GetWindowText(str);
int nLen = str.GetLength()
if(nLen)
nLen--;
m_ctlEdit.SetSel(nLen,nLen);
while(true)
{
TryToLearn("C++,MFC");
}
My articles[^]
bdiamond 
|
|
|
|
|
hi all,
I want to create a application that include the function of a web server(including Https protocol), so can the code of my application invoke
the IIS component object on the PC ? (Assume that the PC don't have IIS installed and also I dont want to install IIS for the application)
Thanks
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
