|
|
Is there a way to determine if a CEdit control's scrollbar has reach the bottom position?
|
|
|
|
|
I imagine GetScrollInfo() would do the trick.
--
If there was a problem, Yo, I'll solve it!
Check out the hook while my DJ revolves it.
|
|
|
|
|
Not if the user scrolls via the scroll thumb. In this way, the OnVScroll message is not activated by the windows framework...only by clicking the scrollbar arrow buttons.
Thank you for replying though!!
|
|
|
|
|
Has anyone worked with Installshield for Visual C++ . I basically need to create a folder in the start menu and then add a list of EXE's to it . Any help is appreciated !
|
|
|
|
|
Check out www.jrsoftware.org ... There's a free program on there called Inno Setup. (It does the same things as InstallShield). It has a wizard and you pretty much tell it the files that you want and it compiles them into one setup.exe file for you (or it can break it down). It also creates the start menu folder, desktop icons (if you desire), and uninstallation that's all automatic. It's very sweet. You can put together a full setup program complete with installation, multiple .EXE's, installation of .DLL's, .OCX's, etc in under 5 minutes!
|
|
|
|
|
I second Inno Setup, that's what we're using for our product.
---------------
Tired of Spam? InboxShield for Microsoft® Outlook® 2K/2K2/2K3
http://www.inboxshield.com
|
|
|
|
|
Hi.
u can use Install Shield Express - Borland Lemited Edition that come with Delphi 6.0 install CD. i think that this is a free version. this version is fully compatible with microsoft visual c++ and so easy to use.
No Comment.
|
|
|
|
|
hello
could anybody tell me the mfc for manipulating the TIFF images??
thx
evange
|
|
|
|
|
You could start by looking at CxImage in the Bitmap & Palettes section of code project, it can open TIFF images.
INTP
|
|
|
|
|
Dear Friends,
I have a question on displaying access file information in my list box
rst.m_LoginUser(CString) & rst.m_LoginPassword(CString) are the information in the access file.
The code is
// Local Varibles
COperationRecordset rst(db);
har str [255];
// Start of the execution
rst.Open();
while (!rst.IsEOF())
{
sprintf(str,"%s\n%s",rst.m_LoginUser,rst.m_LoginPassword);
SendDlgItemMessage(hWnd,IDC_System,LB_ADDSTRING,0, (LPARAM)str);
rst.MoveNext();
}
rst.Close();
Regards,
Anson Tong
|
|
|
|
|
If I set tab-oreder,
than at run-time CDialog is looking corectly,
but at design view of Dialog
z-order of controls remains not changed -
not dependent from tab-order,
so wrong looking...
It is a probem.
I need to desing Cdialog and view it correctly,
so - is there a way, like in Ms Word - ability "send control back of order" -in design view ?
thanks you.
|
|
|
|
|
There should be no problem.
1) Select: Layout -> Tab Order
2) Click on controls in the order you wish.
3) Select: Layout -> Test (or select test button)
Do not forget to check the Group property in the first item of each group of controls, if needed.
INTP
|
|
|
|
|
I see correctly at test,
but is there a method to see picture at design view of dialog directly ?
|
|
|
|
|
That was every thing you could do as far as tab ordering, at design time.
Maybe you should post a more detailed question, as to what the problem is.
INTP
|
|
|
|
|
I need to see picture at design view
as if tab-order is applied,
like when I press Test button for Dialog.
|
|
|
|
|
That is what the Test button is for.
The Tab Order menu selection shows the actual tab order you set.
What you are describing is the method you wish to use in order to solve a problem and not the real problem its' self.
You mensioned some thing about it not looking (or was that working) right at runtime, in your first post. If it is a tab order problem then the problem should also exist when you run the test, at design time. If the group property is not used correctly that will also cause it to act in an unexpected way (will also show up in test).
I recomend the you get a pincel and paper, and try describe the details of what you are observing. You will probably descover what the problem is while you are trying to describe it to you self.
If worst comes to worst, then open the resource file as text and edit the dialog box by and. The tab order is the order in which the controls are entered into the resource, so you could just rearange the lines to be in the order you want (and remember to set use the group property).
I do not know if any of this has helped, but it is the best I can do without
having the project loaded in front of me.
Good Luck!
INTP
|
|
|
|
|
thanks for discussion.
Z-order meand- visible depth, or sequence how to controls appears- next over previous by look.
It possbile to edit directly ctrl-d, or by sequence in rc file.
Problem is now following:
In design mode I see REVERSE order - from wich I will see really when press test or run-time.
May be some option do this REVERSE ?
Do some one know which option do that and
how to correct?
Dialog in rc file looks like:
IDD_Domain_1 DIALOGEX 0, 0, 575, 319
STYLE DS_SETFONT | DS_MODALFRAME | DS_3DLOOK | DS_FIXEDSYS | WS_MINIMIZEBOX |
WS_POPUP | WS_CAPTION | WS_SYSMENU
CAPTION "xxx"
FONT 8, "MS Shell Dlg", 400, 0, 0x1
BEGIN
...
Thanks you.
|
|
|
|
|
Hi folks!
I want to have an ownerdrawn trackbar (Slider) control. Therefore I check for a WM_NOTIFY event with NM_CUSTOMDRAW in the code member of the NMHDR-structure. Let me give a short code example
code:
case WM_NOTIFY:
lpNotify = (LPNMHDR)lParam;
switch(lpNotify->idFrom)
{
case IDC_SLIDER1:
switch(lpNotify->code)
{
case NM_CUSTOMDRAW:
lpDraw = (LPNMCUSTOMDRAW)lParam;
switch(lpDraw->dwDrawStage)
{
case CDDS_PREPAINT:
return CDRF_NOTIFYITEMDRAW;
case CDDS_ITEMPREPAINT:
switch(lpDraw->dwItemSpec)
{
case TBCD_CHANNEL:
FillRect(lpDraw->hdc,&lpDraw->rc,(HBRUSH)GetStockObject(BLACK_BRUSH));
return CDRF_SKIPDEFAULT;
case TBCD_THUMB:
FillRect(lpDraw->hdc,&lpDraw->rc,(HBRUSH)GetStockObject(WHITE_BRUSH));
return CDRF_SKIPDEFAULT;
}
break;
}
break;
}
break;
}
break;
Well, this works fine up to the CDDS_PREPAINT part, where I request an interaction into the control's drawing procedure.
But I never reach the most important part of CDDS_ITEMREPAINT where I acutally paint the control. I've read tons of documentations of this function and all describe it this way.
Does anyone know why it doesn't work for my example?
thanks in advance
Starik
P.S. Environment: VC++ 6.0 SP5
CommCtl. Version: 5.81.4704.1100
|
|
|
|
|
This article [^] should provide useful info.
The technique you mention works well for me, but I use a class derived from CSliderCtrl (sounds more logical that an object draws itself), and use message reflection to get the CustomDraw notification (ON_NOTIFY_REFLECT(NM_CUSTOMDRAW, OnCustomDraw))
And all the girlies say I'm pretty fly for a white guy
|
|
|
|
|
Thanks for the article. But I'm looking for a solution with any use of MFC-classes. Does anyone know a solution just using plain Win-API.
|
|
|
|
|
I would like to be able to highlight a section of a graph, very similar to audio programs highlighting a wav pattern by using the mouse. Any ideas?
Thanks
|
|
|
|
|
You can draw a rectangle area, the "selection", in XOR; look for CDC::SetRop2.
you also need to handle the mouse down, move and up to start and manage the drawing.
Maximilien Lincourt
"Never underestimate the bandwidth of a station wagon filled with backup tapes." ("Computer Networks" by Andrew S Tannenbaum )
|
|
|
|
|
Hi
I would like to know how to make a toolbar button toggle. For example, in MDI if there are two child windows and corresponding buttons on the toolbar for them, if the button
is clicked once then the child window should appear and when it is clicked for the second time the child window should dissappear. Please help me regarding this. This is urgent.
Thanking you,
Regards
Ruchit Sharma. R
|
|
|
|
|
Hi
I would like to know how to make a toolbar button toggle. For example, in MDI if there are two child windows and corresponding buttons on the toolbar for them, if the button
is clicked once then the child window should appear and when it is clicked for the second time the child window should dissappear. Please help me regarding this. This is
urgent.
Thanking you,
Regards
Ruchit Sharma. R
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
