C / C++ / MFC

FirstPrevNext

Listview Tooltip Anthony988713-Jul-01 4:03 Anthony9887 13-Jul-01 4:03  I'm trying to add a tooltip for a listview control using SDK style programming. I want to display the tooltip based on the data displayed in the rows..I can't seem to find any code samples in achieving this process.. Re: Listview Tooltip Derek Price13-Jul-01 5:23 Derek Price 13-Jul-01 5:23  I'm not sure if this is what you want, but this is what I've used for my listviews: const int LVS_EX_LABELTIP = 0x00004000; ListView_SetExtendedListViewStyle(m_libraryPlans,LVS_EX_FULLROWSELECT | LVS_EX_LABELTIP); Hope this helps! Derek ATL Comm band: a few problems BigBear13-Jul-01 1:47 BigBear 13-Jul-01 1:47  Hi, I have been creating a band object for IE starting from a base created with the band wizard here: http://www.codeproject.com/atl/rbdeskband.asp To the class created i have added a CWindowImpl derived class (CMainWindow) which replaces the default window object created by the wizard (HWND m_hWnd). This class is used as a container to handle the command messages created by a toolbar. This toolbar is a member variable of CMainWindow. There are a few things i wish to sort out but am unsure how: Firstly if i close IE with my band still visible, when i load IE up again the band is still there as it should be however the toolbar is not loaded (or at least not visible nor clickable). The toolbar creation code is handled in the OnCreate method of the CMainWindow (which does get executed everytime, i checked). Has anyone else come across this? perhaps the code should be elsewhere. Secondly I am wondering how to get a handle to the parent rebar that my band object is in so that I can add chevrons to my band (or is there a different way of adding chevrons?). Thankyou in advance. Mat. Re: ATL Comm band: a few problems Erik Thompson13-Jul-01 7:22 Erik Thompson 13-Jul-01 7:22  You could be having drawing problems because of the threading model you are using. If you are using my old wizard, there was a bug in it that the threading model was not getting set and thus you could only have one instance of the band at any time. Setting the threading model to apartment will fix this. You would look for this in the *.RGS file of your project. As for the cheverons, the code in the SetSite method implementation gets the parent window handle that will allow you to do cheverons or what have you. This code is produced by the wizard by default and is near the middle of the function just before the call to RegisterAndCreateWindow. The parameter passed into the R&CW method is the handle to the rebar window. Cheers, -Erik ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ My thoughts are my own and reflect on no other. timer ov12-Jul-01 23:46 ov 12-Jul-01 23:46  How can I check for timer's existance? I can create a flag, set it with SetTimer and reset with KillTimer, but is the easier way exist? I'm using a pure API. With the best regards, Vitaly. Re: timer Tomasz Sowinski13-Jul-01 0:49 Tomasz Sowinski 13-Jul-01 0:49  I don't think there's any documented way of doing this. The funny thing is that if you create a second timer with given ID, the function returns TRUE, and GetLastError returns 0. Tomasz Sowinski -- http://www.shooltz.com How: each doc/view in own thread (advanced) EiSl12-Jul-01 23:28 EiSl 12-Jul-01 23:28  Hello guru's I've a interessting problem, and probably the most will say: please don't do that because of the extra headache OK.. Because the fact I've a MDI application on which each doc/view can expect a lot of input. This input is no user input, but trace events read from TCP-socket. The communication handling for TCP/IP is already done it it's own thread, only passing data to the document when there's something to write. Also: I've a fast way of writing to the view, but some times the main application is very very slow in responding (moving/menu/toolbar etc) when more than 3 documents are handled with a lot of data. The problem is that all the doc/view handling is done under the hood of the applications main thread. This is the reason for wanting each doc/view in it's own thread. Now I've read sometime somewhere that someone had put each doc/view in its own thread. The question is: how to do this for a MDI application This is maybe also a very good article to store in CodeProject library. Thanks in advance.. EiSl Re: How: each doc/view in own thread (advanced) Tomasz Sowinski12-Jul-01 23:48 Tomasz Sowinski 12-Jul-01 23:48  I've a MDI application on which each doc/view can expect a lot of input. What kind of input it is? Tomasz Sowinski -- http://www.shooltz.com Re: How: each doc/view in own thread (advanced) EiSl13-Jul-01 0:45 EiSl 13-Jul-01 0:45  Tomasz, Sorry I'wasn't complete I've already updated the initial story. The input is not from user, but Trace Events from a TCP-socket. A separate thread (launched by the doc) forms a complete protocol handler and connects to a device. When a trace-event is received, a string passed to the doc which updates the view. It's also possible for the user to select a line in the view, and than press a button to add some comments. But this is rarely used, so: no user input to view. Hopes this completes the story, EiSl Re: How: each doc/view in own thread (advanced) Tomasz Sowinski13-Jul-01 1:08 Tomasz Sowinski 13-Jul-01 1:08  I've never done MDI multi-threaded app, so can't really comment on this. There's a topic in Platform SDK titled "Using a Multithreaded Multiple Document Interface Application" (under Base Services/DLLs, Processes and Threads/Using Processes and threads). How this applies to MFC app is another story. Have fun! Tomasz Sowinski -- http://www.shooltz.com Re: How: each doc/view in own thread (advanced) Tomasz Sowinski13-Jul-01 1:31 Tomasz Sowinski 13-Jul-01 1:31  I've also found MTMDI sample in MSDN. It's a MFC program that uses multiple user-interface threads. However, it's 'old-style' MFC, without the doc/view. Tomasz Sowinski -- http://www.shooltz.com Re: How: each doc/view in own thread (advanced) #realJSOP13-Jul-01 1:41 #realJSOP 13-Jul-01 1:41  I would probably create a thread that handles the TCP/IP connection itself, and when it has data for displaying in a view, would send a message to the approriate view. Each view would have to register itself with the TCP/IP thread so that the thread would know who to send the data to, and the thread would have to maintain a list of views' pointers that are registered with it. I think this might give you back your interface response because the views are now only displaying data that the TCP/IP thread tells them they have. Re: How: each doc/view in own thread (advanced) EiSl13-Jul-01 3:12 EiSl 13-Jul-01 3:12  Hello John, Thanks for reply!! This is already how it's working now. When a new document is created (OnNewDocument), a communication thread (WinThread) is started, which is using CAsyncSockets for communications. When data has to be printed, it is passed to the document. But... When I've have more than 3 documents active, and they generating quite a lot data, the main app starts become less responsive since all the documents/view updates are done under the hood of the main application thread. That was the reason for asking a thread handling doc/view archtecture. EiSl Re: How: each doc/view in own thread (advanced) #realJSOP13-Jul-01 7:29 #realJSOP 13-Jul-01 7:29  What kind of view are we talking about? CEditView? CListView? CFormView? Re: How: each doc/view in own thread (advanced) EiSl15-Jul-01 19:47 EiSl 15-Jul-01 19:47  Hello John, Does this really matters?!? Ok in case of a CFormView yes it matters. In my case we're talking about a read-only CEditView, but maybe this is changed to a CListView. Sincerly, EiSl Re: How: each doc/view in own thread (advanced) #realJSOP16-Jul-01 0:29 #realJSOP 16-Jul-01 0:29  You'd probably be better off with a CFormview with a CListBox in it. I'd be willing to bet that (with the CEditView) you are simply adding the newest message to the existing contents of the edit control. At first, performance is pretty good, but the longer the program runs, the worse less responsive the program gets. If you change to a list box, you have better control over how much data is contained in the control (you could limit it to say 1000 lines). With an edit control, you have to call SetWindowText with a string that is larger each time. This takes a lot of processing time (a lot more time than adding a single string to a list box). I would advise against using a list control unless you need multiple columns for some reason. A list box would be a better choice. Re: How: each doc/view in own thread (advanced) EiSl16-Jul-01 21:41 EiSl 16-Jul-01 21:41  Thanks for your answer! Most the time you read answer like: "better do this way" without a clear explaination why to do so. I've never thougth about the combination of CFormView with ListBox, because I was only looking to derivation of the View. Since it only accepts xxxView I was thinking about the ClistView or CEditView and have chosen for the editview. When everything is working fine I will take a look for changing that part, since it's quite easy to change. Happy programming! Eize Re: How: each doc/view in own thread (advanced) #realJSOP17-Jul-01 1:53 #realJSOP 17-Jul-01 1:53  I had the same problem in a previous project that I inherited. We were storing messages coming across a network in an edit control. These messages could be anywhere from 2-64k in length, and that we got approximately 150 messages per minute, and we were simply adding them to the edit control with no thought of the size of the string *in* the edit control. Performance slowed to such a point that the CPU utilization was pegged at 100% and we got so far behind in the message queue that the only recourse was to do a hardware reset. The really embarassing part was that our app was the only one running. LOL Anyway, we needed to have the edit control, so we changed the code buy only storing only the previous message in the edit control. Performance improved dramatically, and we regained keyboard control of the system. Good luck on your project. Re: How: each doc/view in own thread (advanced) Stephen C. Steel13-Jul-01 13:11 Stephen C. Steel 13-Jul-01 13:11  I don't think that a thread per doc/view is a good approach: there are a lot of complications, and it doesn't change the fact that only one thread can update the GUI at a time (the GDI calls are serialized). A much better approach, which I have used successfully in a couple of commercial applications, is to have one worker thread per doc, with the original GUI thread handling all the views. The worker threads can update each documents contents to reflect the input recieved via TCP/IP independently. You can run into some problems invoking window related functions from a worker thread because of the need to link C++ objects like CWnds with the associated Windows HWND (look up handle maps in the VC++ docs if you want the messy details). As long as the worker threads stick to updating the data in the CDocument derived class, you won't have problems. You may have to use critical sections or some other form of synchronization to stop the GUI thread from reading partially updated document contents though. I get around the handle map problem by defining a user message UM_UPDATE_VIEWS. The worker threads POST (not send) this message to the main window after changing the document contents. The main GUI thread processes this message, by calling CDocument::UpdateAllViews() for the CDocument derived object passed as a pointer in the LPARAM. This way UpdateAllViews() gets invoked by the main GUI thread, so there is no problem with handle maps. Stephen C. Steel Kerr Vayne Systems Ltd. COleDateTime 12-Jul-01 23:19 12-Jul-01 23:19  I try to create an application which composed by a dialog box. The first aim of this application is to connect an access database, so i put a button to do that. After the connection done, i want to compare a Date which is kept in an edit box in my dlg box to dates in my database. So, I declare m_dlgDate as a COleDateTime variable. When I run the application, even if the dlg date and one of the data date are the same, my application return an AfxMessageBoxwith the message "Not Good Dates". So, I would like to know if my declarations that's wrong or not?? gerald Re: COleDateTime markkuk13-Jul-01 8:12 markkuk 13-Jul-01 8:12  Perhaps you should use a DateTimePicker control instead of a text box? Is the messagebox a complaint from the MFC framework or a result of your own code? The COleDateTime and SQL timestamp both contain clock time in addition to date, you need to take care that it's masked out if you want to compare only the dates. Getting parts of the Platform SDK 12-Jul-01 23:15 12-Jul-01 23:15  Hi I need two files, psapi.h and psapi.dll. But according to the platform sdk setup,I must download over 80 meg for that. Since I am on a modem connection, the idea isn't appealing to me. Is there any other way of getting individual files? ftp.microsoft.com is down.... Re: Getting parts of the Platform SDK EiSl12-Jul-01 23:40 EiSl 12-Jul-01 23:40  Hello, I've got those file locally. (psapi.h,*.lib and .dll, total 27kB). It's way smaller than 80MB If you provide me an e-mail address for sending it to you, I will sent it. EiSl Strange implementation in one of the samples... EiSl12-Jul-01 23:12 EiSl 12-Jul-01 23:12  Hello all, Please take a look to one of the submitted code snippets, where the layout is recalculated: Link to sample in CodeProject: http://www.codeproject.com/docking/sizing_tabctl.asp Part of the code: void CMainFrame::RecalcLayout(BOOL bNotify) { CMDIFrameWnd::RecalcLayout(bNotify); CMDIFrameWnd::RecalcLayout(bNotify); } Question: Why does the author calls the same RecalcLayout twice ?!?! Thanks, EiSl CPropertySheet::RemovePage in MFC causes memory leak Serge Desmedt12-Jul-01 23:11 Serge Desmedt 12-Jul-01 23:11  Hi, In an application we've written we have a dialog based MFC application based on the CPropertySheet class. We are dynamically adding and removing pages while the the dialog is displayed. If the property pages we're adding and removing contain controls (i've tried it with buttons and treecontrols), then we have a memory leak: when I constantly add and remove pages, thus always returning to a same initial state, the application consumes more and more memory. It has nothing to do with the CPropertyPage derived objects themselves. I added several integer members to them, to make the memoryfootprint of the object bigger, but this doesn't cause the memory leak to be bigger. However, when I fill the dialog (by using the dialog editor of visual studio 6.0) with a lot of buttons, then the memory leak is getting bigger. I've added no functionality to the buttons, and not to the CPropertyPage derived class, except for one button with which I can add and remove pages to the CPropertySheet derived dailogbox. Thus it looks like MFC doesn't destroy the dialog template, or the controls on it. The page we're removing is NOT the active page. I've tried explicitly callling destroywindow on the propertypage that gets removed but this does not work neither. The only functionality the application has, is adding and removing CPropertyPage derived objects, so the memoryleak can not be caused by anything else. Does anyone have an idea what can be wrong and how to solve it Thanks, Serge Desmedt

Last Visit: 31-Dec-99 18:00     Last Update: 21-May-24 5:34 Refresh ᐊ Prev1...18185181861818718188181891819018191181921819318194 Next ᐅ

General    News    Suggestion    Question    Bug    Answer    Joke    Praise    Rant    Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.