C / C++ / MFC

#include <P18f2620.h>
#include <delays.h>
#include <adc.h>

#define PWON PORTCbits.RC0 
#define RESET PORTCbits.RC1 

void InterruptHandlerHigh(void);
void adc_accelerometer(void);

char MESS[12] = {"AT+CREG=2\r\n"}; //Detect CellID
char MESS1[11] = {"AT+CREG?\r\n"}; //Detect CellID
char MESS2[12] = {"AT+CMGF=1\r\n"}; // Set the SMS form in text mode
char MESS3[22] = {"AT+CMGS=+6512345678\r\n"}; // Set the mobile phone to send SMS
char MESS4[21] = {"CellID | 15831-32\n\x1A"}; //Example of sending CellID
         
                                                                  
unsigned char a,b,i,j,k,l,m,x;
int X,Y,Z,X1,Y1,Z1;


#pragma code InterruptVectorHigh = 0x08
void InterruptVectorHigh(void){
_asm
goto InterruptHandlerHigh			//jump to interrupt routine
_endasm
}
#pragma code

#pragma interrupt InterruptHandlerHigh
void InterruptHandlerHigh()
{
	if(INTCON3bits.INT1IF==1)
	{	
					if((X1+15<X<X1-15) | (Y1+15<Y<Y1-15) | (Z1+15<Z<Z1-15))
					{
					Delay10KTCYx(200);
					i=0, j=0, k=0, l=0, m=0;
			
					while (MESS[i])
					{				
						while(!TXSTAbits.TRMT);
						TXREG=MESS[i];
						i++;
					}

					Delay10KTCYx(200);
					while (MESS1[j])
					{
						while(!TXSTAbits.TRMT);
						TXREG=MESS1[j];
						j++;
					}
			
					Delay10KTCYx(200);
					while (MESS2[k])
					{
						while(!TXSTAbits.TRMT);
						TXREG=MESS2[k];
						k++;
					}
			
						Delay10KTCYx(200);
						while (MESS3[l])
					{
						while(!TXSTAbits.TRMT);
						TXREG=MESS3[l];
						l++;
					}
				
					Delay10KTCYx(200);
					while (MESS4[m])
					{
						while(!TXSTAbits.TRMT);
						TXREG=MESS4[m];
						m++;
					}
		}
}
}


void main(void)
{
	PWON = 1;
	RESET = 1;
	INTCONbits.GIEH = 0;			// disable global and enable external interrupt 0
	ADCON0=0b00000001;
	ADCON1 = 0b00001100;			// AN0,AN1,AN2 channel and internal voltage referencing
	ADCON2 = 0b10000100;			// right justified, manual acquistion time
	TRISA = 0b00000111;
	TRISC = 0b10111100;				// RC7(RX) as input & RC6(TX) as output 
	SPBRG = 10;						// baud rate = 115200
	TXSTA = 0b00100100;				// asynchronous mode, 8-bit data
									// transmit enable, high baud rate select bit
	RCSTA = 0b10010000;				// serial port enable, 8-bit data
									// continuous reception
	RCONbits.IPEN =1;				// IPEN
	INTCON3bits.INT1IP;				// IP = High
	INTCON2bits.INTEDG2=1;			// EDGE: raising
	INTCON3bits.INT1IF=0;			// clear IF
	INTCON3bits.INT1IE=1;			// enable IE
	INTCONbits.GIE = 1;				// enable Global Interrupt


				for(x=0;x<1;x++)
				{
					Delay10KTCYx(200);
					i=0, j=0, k=0, l=0, m=0;
			
					while (MESS[i])
					{				
						while(!TXSTAbits.TRMT);
						TXREG=MESS[i];
						i++;
					}

					Delay10KTCYx(200);
					while (MESS1[j])
					{
						while(!TXSTAbits.TRMT);
						TXREG=MESS1[j];
						j++;
					}
			
					Delay10KTCYx(200);
					while (MESS2[k])
					{
						while(!TXSTAbits.TRMT);
						TXREG=MESS2[k];
						k++;
					}
			
						Delay10KTCYx(200);
						while (MESS3[l])
					{
						while(!TXSTAbits.TRMT);
						TXREG=MESS3[l];
						l++;
					}
				
					Delay10KTCYx(200);
					while (MESS4[m])
					{
						while(!TXSTAbits.TRMT);
						TXREG=MESS4[m];
						m++;
					}
				}
	
	while(1)
	{
		PORTA=~PORTA;
		for(i=0;i<5;i++)
		Delay10KTCYx(100);
		
		
		Delay10TCYx( 5 ); // Delay for 50TCY
		ADCON0bits.GO=1; // Start conversion
		while(ADCON0bits.DONE); // Wait for completion
		X1 = ADRESH*256+ADRESL;  // Read result
		ADCON0bits.ADON=0; // Disable A/D converter
		
		 
		ADCON0=0b00000101;
		Delay10TCYx( 5 ); // Delay for 50TCY
		ADCON0bits.GO=1; // Start conversion
		while(ADCON0bits.DONE); // Wait for completion
		Y1 = ADRESH*256+ADRESL;  // Read result
		ADCON0bits.ADON=0; // Disable A/D converter
		
		
		ADCON0=0b00001001;
		Delay10TCYx( 5 ); // Delay for 50TCY
		ADCON0bits.GO=1;// Start conversion
		while(ADCON0bits.DONE); // Wait for completion
		Z1 = ADRESH*256+ADRESL; // Read result
		ADCON0bits.ADON=0; // Disable A/D converter 
		
		
	}
	
}

void adc_accelerometer(void)
{
	
		Delay10TCYx( 5 ); // Delay for 50TCY
		ADCON0bits.GO=1; // Start conversion
		while(ADCON0bits.DONE); // Wait for completion
		X = ADRESH*256+ADRESL;  // Read result
		ADCON0bits.ADON=0; // Disable A/D converter
		
		 
		ADCON0=0b00000101;
		Delay10TCYx( 5 ); // Delay for 50TCY
		ADCON0bits.GO=1; // Start conversion
		while(ADCON0bits.DONE); // Wait for completion
		Y = ADRESH*256+ADRESL;  // Read result
		ADCON0bits.ADON=0; // Disable A/D converter
		
		
		ADCON0=0b00001001;
		Delay10TCYx( 5 ); // Delay for 50TCY
		ADCON0bits.GO=1;// Start conversion
		while(ADCON0bits.DONE); // Wait for completion
		Z = ADRESH*256+ADRESL; // Read result
		ADCON0bits.ADON=0; // Disable A/D converter 
}