|
Well, this seems crazy.
I know a guy at church that develops WM5 apps with C#, he said there was a form that has the screen layout, and he drags a button onto that, and can create a callback function or whatever.
I have not found any such form layout for C++, is there?
Also, I have since figured out how to make a button and get it working just fine. If anyone is interested, just let me know and I can post something. (otherwise, I'll keep the secret too).
|
|
|
|
|
I write a kind of socket program as a massenger program, but I couldn't run my socket program..
|
|
|
|
|
I think you're going into a little too much detail, but just give us the gist of it.. 
Regards,
--Perspx
"A refund for defective software might be nice, except it would bankrupt the entire software industry in the first year."
-Andrew Tanenbaum
"Einstein argued that there must be simplified explanations of nature, because God is not capricious or arbitrary. No such faith comforts the software engineer."
-Fred Brooks
|
|
|
|
|
Perspx wrote: I think you're going into a little too much detail
Exactly! Information Overload! I was totally underwhelmed by everything he said after "socket program.."
|
|
|
|
|
led mike wrote: I was totally underwhelmed by everything he said after "socket program.."
I'm still perplexed as to what a "massenger program" is..
Regards,
--Perspx
"A refund for defective software might be nice, except it would bankrupt the entire software industry in the first year."
-Andrew Tanenbaum
"Einstein argued that there must be simplified explanations of nature, because God is not capricious or arbitrary. No such faith comforts the software engineer."
-Fred Brooks
|
|
|
|
|
Do you want to test your program or compile it?
Of one Essence is the human race
thus has Creation put the base
One Limb impacted is sufficient
For all Others to feel the Mace
(Saadi )
|
|
|
|
|
You cannot be serious.
It is a crappy thing, but it's life -^ Carlo Pallini
|
|
|
|
|
Is there anything different we need to do to make our executables compatible with standard user XP? Will worry about Vista later. What do we need to do to get programs to work with limited use accounts? we have VS 6.0 and builing c++ code as of right now.
thank you
|
|
|
|
|
It depends what you're trying to do. In general, you don't need to do anything special for your program to run as a standard user.
One very simple way is to develop and test your code as a standard user, by running VS as a standard user. That's what I've done since 2001, developing C++ applications using VS6, VS2003, VS2005 and VS2008 under Windows 2000 (not VS2005 and VS2008) and Windows XP.
|
|
|
|
|
Hi,
I want to use the Tree control inside the CList control. I found many artical on it when I search it. But I am not able to find simple approach to do this. Most of the artical have other things beside the tree control. And many of having ready .dll to be used in program. But none one explain how to do this. Can any one suggest me the simplest way to do this(web link/sample artical). The artical which only deal with inserting tree inside list control is welcome.
Thanks:-
Mike
|
|
|
|
|
|
Hi,
In our Project we have one Main window which is menu and two dialog boxes. They are separate windows.But I want all of them in same window as tabs.What should I do?
Rekha.
|
|
|
|
|
I'm assuming you're using MFC here.
Create the two dialog boxes with its border style set to none and visible property to false.
Create 2 objects representing the dialogs.
Call .Create on the objects with the tab control as its parent.
Set the size of the dialogs to the size of the client area of the tab.
Set the dialog that is initially shown to visible.
Then in the tab change notification, hide and show the relevant dialogs.
«_Superman_»
|
|
|
|
|
Hello there... I am a newbie here but am trying exactly what hemlat has asked. I hope it is ok to carry on with this thread rather than starting a new one. Please let me know otherwise.
I read your answers (many thanks) and gave it a go, but am struggling, since I am (unfortuantely) lacking the indepth knowledge.
May I ask you for your help, please?
I am using VC++ 6.0 and want to create a very simple dialog-box-based (no SDI or MDI) program utilizing the MFC.
Using the resource editor I have created two dialogs "IDD_PAGE_TestPage1" and "IDD_PAGE_TestPage2".
Using the class wizard I have then created two classes derived from CPropertyPage:
CTestPage1::CTestPage1() : CPropertyPage(CTestPage1::IDD) and CTestPage2::CTestPage2() : CPropertyPage(CTestPage2::IDD).
In my main window (the dialog-box-based program that I created using the wizard) I have created a tab control element, which I would like to somehow "link" to the two dialogs as described above.
I tried achieving this by creating the following objects:
CPropertySheet myPropertySheet;
CTestPage1 myPage1;
CTestPage2 myPage2;
... and then I tried all sorts of things (including ...DoModal, ....ShowWindow(), ..etc. to get my dialogs displayed as part of the tab control, but in vain.
FYI: Although I did some programming in C and C++ many, many years ago (mainly embedded stuff) and even started once to do some WIN32API and MFC programming, ...I have to admit that I am at this stage still lacking some of the (crucial, I know...) Windows concepts (in terms of parent/child relationship, event handling, etc.
I would greatly appreciate any feed back to my questions/problem.
Thanks !
modified on Sunday, February 8, 2009 1:22 AM
|
|
|
|
|
Hi,
Please see my reply to hemlat.
It is a crappy thing, but it's life -^ Carlo Pallini
|
|
|
|
|
Thanks Rajesh, that is an interesting link/example, but I am not "there yet".
In order to learn the MFC basics properly and also not to complicate things for me at this stage (I am a novice), I would really like to get this relatively simple task (at least that's what I thought it would be), ...to be done with the standard MFC functionality.
I studied the help file etc. and my thinking was that using the CPropertySheet and ...page classes should do the trick, but rather than displaying the content of the individual dialogs in the appropriate tab pages, they are being displayed on top of the whole main dialog window and I need to close them to get to the actual (main) window).
I am sure this can be done, but I seem to be missing an important little step to implement it properly.
Maybe I must not call the individual dialogs as modal ones (with .DoModal(), but have to somehow, make them non-modal child of the tab control?
Even if that is the case, my problem is, that I don't have a clue how to do it.
Any help is most appreciated. Thanks. 
modified on Sunday, February 8, 2009 3:53 AM
|
|
|
|
|
The problem is that your're not linking the property pages to the property sheet.
Try the following code in the main dialog class.
myPropertySheet.AddPage(&myPage1);
myPropertySheet.AddPage(&myPage2);
myPropertySheet.DoModal();
«_Superman_»
|
|
|
|
|
Thanks for your message,
As one of my many attempts, I had actually tried what you suggest, already. That is how it looks.
BOOL CTestDlg::OnInitDialog()
{
CDialog::OnInitDialog();
CPropertySheet myPropertySheet;
CTestPage1 myPage1;
CTestPage2 myPage2;
myPropertySheet.AddPage(&myPage1);
myPropertySheet.AddPage(&myPage2);
myPropertySheet.DoModal();
If I do this, the application does actually call the tab control (consisting of these two test pages). And it even comes fully equiped with OK CANCEL APPLY and HELP button in that dialog.
However it is not a 'child' (hope this term is right) of my actual main window, but sits on top of the main window instead. Once I hit OK or CANCEL this tab control dialog (which contains the correct tab contents, by the way) disappears and I can see my actual main window. But no way to get the tab control dialoga within my main window.
I think I am still missing an important step.
Maybe I shouldn't call the
myPropertySheet.AddPage(&myPage1);
myPropertySheet.AddPage(&myPage2);
in the OnInitDialog() function? What where else?
Heeeeeeeeelllllllp 
|
|
|
|
|
I understand that you want the property sheet to be your main dialog.
You can remove the DoModal that is already there in the InitInstance method and replace it with the following code -
CPropertySheet myPropertySheet;
CTestPage1 myPage1;
CTestPage2 myPage2;
myPropertySheet.AddPage(&myPage1);
myPropertySheet.AddPage(&myPage2);
myPropertySheet.DoModal();
«_Superman_»
|
|
|
|
|
Thanks for your help and patience and please excuse my ignorance, but I don't know what you mean by "InitInstance"...I don't think I have that in my code.
To create my main window I just ran the AppWzeard and let it create most of my dialog box based program.
So far I have only added a few buttons which call some message boxes.
I am really at the beginning of the program. No fancy functionality yet.
Yes you are right my main window, which contains a few control elements (including the tab control, which I want to display the individual dialogs CTestpage1 and CTestpage2) is supposed to be the one and only dialog.
So on start up of the program I would like the tab control having the focus on the first of my dialog pages (CTestPage1).
|
|
|
|
|
Search through all the .cpp files.
You will see a method called InitInstance.
In that you will see a call to the DoModal function.
«_Superman_»
|
|
|
|
|
Hi,
thanks for your replays. I am able to create wizards by using CPropertyPage and CPropertySheet.But how can I communicate between different windows?
In one of my window I am having one button.If I click on that button it should show another window.
Rekha.
|
|
|
|
|
Thanks. Of course you were right and sure enough, I have found the appropriate InitInstance function.
I then did what you suggested and put the code in (instead of the .DoModal() of the main app window.
And thanks for pointing it out, as while studying this particular *.cpp file and the header file, I have straight away learnt something new about the main app and how it gets instanciated. So that was interesting and worth-while.
However, ...and sorry to be a pain... I am still not quite satisfied:
1) ...because Windows killed my program upon exiting it. It first displays the tabs perfectly fine and I can hop between the individual tabs and so on, but when closing it (via the OK or CANCEL button) it indeed closes the application, but then the WINDOWS OS comes with a message telling that it had to terminate the program, which could not be closed properly (you know, ..the old "Do you want to send a report to Microssoft" error dialog.
2) ...well and secondly, because that is still not quite the behaviour that I want from my little test application.
I try to summarize what I need:
i) When the program (dialog box-based) starts, the a main window with a handful controls appears.
ii) Beside some buttons and static text controls, one of the controls is a tab control which will later contain a whole range of tabs for different things (obviously, as this is what a tab control is for - to group different entities of parameters/data...). After start up the focus should be on the first tab (but I guess I can suss that out later)
iii) I want the tab control to display some dialogs, which I have previously designed with the resource editor. So they exist as individual dialogs - for this purpose I have derived classes from CPropertyPage and an instance of CPropertySheet:
CPropertySheet myPropertySheet;
CTestPage1 myPage1;
CTestPage2 myPage2;
--> In other words, I want one main window which contains a tab control that shows different content (depending which tab you select) and besides this tab control it will have other elements, too. I don't want the tab control to overlay the whole window (sitting on top). I want the individual dialogs (myPage1 and myPage2 to be just in the tab.
And I have seen some fancy workarounds in this great forum to achieve simialr things; some really interesting looking self-made classes, which I am also keen to study - but at a later stage of my "programming career". For now I want to make this work with MFC, ....and sure there must be a way. I have seen a lot of applications out there, that do exactly that.
I hope all this makes sense. Thanks for your help...
modified on Monday, February 9, 2009 6:12 AM
|
|
|
|
|
For your requirement you do not need to use the CPropertySheet or CPropertyPage classes.
You simply create a class inherited from CDialog for each dialog to be shown in tabs.
Make sure the Visible property of all classes are set to false.
Call the Create method of the dialog class setting the tab control as its parent.
Handle the tab change notification of the tab control.
In the notification handler, show the dialog to be shown and hide all the other dialogs.
«_Superman_»
|
|
|
|
|
Many thanks, I think I get a better idea with every message you post. I appreciate your help! Even with the actual problem not quite being solved yet, I have learnt heaps already.
If I understand it correctly the CPropertySheet and CPropertyPage classes are for dialogs, that are actually meant to be on top (as individual dialogs, which the user then confirms via OK, CANCEL, (ESC ENTER) etc., so for that you actually don't use the Tab Control elelement from the toolbar, correct?
And the Tab Control is if you want to use it WITHIN an application, where you can also have other control elements, but all of these will still stay within the main window. Would that roughly summarize the difference between PropertySheets/Pages and a stnadard Tab Control?
Thanks in advance for your comments/answers to confirm this.
O.k. I have disregarded the PropSheet stuff for now and tried what you had described with the .Create function.
Well, I think I start to understand the concept, but unfortunately I can't quite get it to work.
I tried putting the
CTest_Tab_Dialog myTestTab;
myTestTab.Create(IDD_PAGE_TestPage3, NULL);
in the OnInitDialog() function, but the compiler doesn't like it: error C2065 undeclared variable
Then I put it in the OnSelchange notification handler function, like this:
void CTestDlg::OnSelchangeTabMenus(NMHDR* pNMHDR, LRESULT* pResult)
{
CTest_Tab_Dialog myTestTab;
myTestTab.Create(IDD_PAGE_TestPage3, NULL);
switch (m_cTab.GetCurSel())
{
case 0: myTestTab.ShowWindow(SW_SHOW);
break; ;
}
*pResult = 0;
}
...now I can compile and run the program. So far so good.
However, my dialog doesn't get called, I mean it is not visible.
Please note, that despite your hint I have not worked yet on the scaling/sizing that you have mentioned in your previous post. But I thought I can sort that out later. I am not worried too much, if the ta content dialog is a bit too small. I first want to see this stupid dialog.
I am not sure what parameter to call the .Create() function with. Maybe you can explain that to me. Just to make it compilable, I have added a NULL, not really knowing what exactly that does; but perhaps that is wrong, too?!
One thing I noticed is that if I very rapidly change between the tabs of my tab control, I can briefly see the content of the dialog. So it appears that Windows is actually drawing it, but only for a very short moment and then it gets overwritten again.
Maybe that helps you to ...help me  Thanks for shedding more light on this.
modified on Tuesday, February 10, 2009 4:05 AM
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
