C / C++ / MFC

Re: Read from file into array

1-Mar-07 3:46

arunkk1 wrote:
I'm currently using 'fgets' to read a file like the sample below...

Check again. You are using ReadString() to read from the file.

arunkk1 wrote:
is there a way for me to read the X,Y & Z data and store them into a multi-dimensional array?

Yes.

arunkk1 wrote:
Secondly, the number of entries for the X,Y & Z data can vary from one file to another, so if an array is to be used, it has to be able to be sized dynamically.

MFC, as well as the STL, have several provisions for this.

"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15

"Judge not by the eye but by the heart." - Native American Proverb

JBAK_CP1-Mar-07 3:53

JBAK_CP

1-Mar-07 3:53

Correct, I was using fgets.....using ReadString now.

Could you please tell me how or point me to an example on how to read the data into a multi-dimensional array?

Thanks

Re: Read from file into array

David Crow1-Mar-07 3:58

Problems with project from VS2003 in VS2005

1-Mar-07 3:58

arunkk1 wrote:
Could you please tell me how or point me to an example on how to read the data into a multi-dimensional array?

How many numbers are on each line of the file? If it's a fixed number, just spilt strLine using AfxExtractSubString(). Now add those three numbers to an array like you would any other.

"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15

"Judge not by the eye but by the heart." - Native American Proverb

Asdef Jaker1-Mar-07 3:21

1-Mar-07 3:21

Hi,
I've got some project I need to compile under VS2005. But I've run into this problem:

error C2664: 'CGeneralAbstract::ParsePath' : cannot convert parameter 5 from 'char **' to 'const char *&'

The call code looks like this:

char *secondPart;<br />
General->ParsePath(parent, path, pathType, pathIsDir, secondPart)

The declaration looks like this:
virtual BOOL WINAPI ParsePath(HWND parent, char *path, int &type, BOOL &isDir, const char *&secondPart) = 0;

Thank you for you help.
PS:I'm coming back to C++ from C# Unsure | :~

Asdef Jaker
What part of "Thou shall not kill" don't you understand? GOD

prasad_som1-Mar-07 3:40

prasad_som

1-Mar-07 3:40

Asdef Jaker wrote:
char *secondPart;
General->ParsePath(parent, path, pathType, pathIsDir, secondPart)

Are you sure, its not ,

char *secondPart;
General->ParsePath(parent, path, pathType, pathIsDir, &secondPart)

Prasad
Notifier using ATL | Operator new[],delete[][^]

Asdef Jaker1-Mar-07 4:27

1-Mar-07 4:27

Thank you for the idea, but it doesn't work.
Using your code the error is:

error C2664: 'CGeneralAbstract::ParsePath' : cannot convert parameter 5 from 'char **' to 'const char *&'

Asdef Jaker
What part of "Thou shall not kill" don't you understand? GOD

prasad_som1-Mar-07 5:34

prasad_som

1-Mar-07 5:34

Asdef Jaker wrote:
Thank you for the idea, but it doesn't work.

I asked you the question , whether you have passed pointer to pointer, instead of pointer? Because, error suggests so.

Prasad
Notifier using ATL | Operator new[],delete[][^]

C^hris L^osinger1-Mar-07 5:29

C^hris L^osinger

1-Mar-07 5:29

how about:

General->ParsePath(parent, path, pathType, pathIsDir, (const char *)secondPart)

?

image processing toolkits | batch image processing | blogging

Michael Dunn1-Mar-07 5:54

Michael Dunn

1-Mar-07 5:54

Fix the type of secondPart so it matches the type that ParsePath() is expecting:

const char* secondPart;

--Mike--
Visual C++ MVP Cool | :cool:

LINKS~! Ericahist | PimpFish | CP SearchBar v3.0 | C++ Forum FAQ

Ford, what's this fish doing in my ear?

James R. Twine1-Mar-07 6:30

1-Mar-07 6:30

Michael Dunn wrote:
Ford, what's this fish doing in my ear?

Ford as in Prefect? Smile | :)

Peace!

-=- James
Please rate this message - let me know if I helped or not!<HR>If you think it costs a lot to do it right, just wait until you find out how much it costs to do it wrong!
Avoid driving a vehicle taller than you and remember that Professional Driver on Closed Course does not mean your Dumb Ass on a Public Road!
See DeleteFXPFiles

Michael Dunn1-Mar-07 10:06

Michael Dunn

1-Mar-07 10:06

That's the one Smile | :)

--Mike--
Visual C++ MVP Cool | :cool:

LINKS~! Ericahist | PimpFish | CP SearchBar v3.0 | C++ Forum FAQ

Ford, what's this fish doing in my ear?

James R. Twine1-Mar-07 6:24

1-Mar-07 6:24

   Is this function being called exist in a LIB or a DLL?

   On older versions of VC++, a reference was really a pointer behind the scenes (it might still be), which is why you could pass pointer to something to a function that expected reference to something, like calling an extern "C" C++ function that took a reference from straight C code (there is no reference type in C). This kind of thing works in VC++ 6.0 (IIRC).

   You just might be seeing more strict type checking that let you get away with other stuff (see below).

   Actually, the type expected for the secondPart parameter is const char *, so you should declare that variable as:

const char *secondPart = NULL;  // Note - Always Initialize!

Peace!

Asdef Jaker1-Mar-07 6:47

1-Mar-07 6:47

You are right - the function is in a DLL from older version of VC++

I've already tried casting, that worked:
General->ParsePath(parent, path, pathType, pathIsDir, (const char *&)secondPart);
but I'm not happy about it.

Your sugestion looks much nicer, but I have to test it yet.

Do you think, there will be some problems when using different versions of VC++?

Asdef Jaker
What part of "Thou shall not kill" don't you understand? GOD

James R. Twine1-Mar-07 7:05

1-Mar-07 7:05

   The implementation of a reference in C++ is implementation-dependent. This means that the way it works in any C++ compiler suite can change at any time (e.g. download a VC service pack, and it might change), and may not be compatible between two different C++ platforms.

   If you need to support reference-like behavior in a DLL that may be used by other 3rd-party applications (which may NOT have been written using VC++), I would suggest using a pointer instead of a reference (change to const char ** instead of const char *&).

   I would advise that you change the type of the variable you are using as opposed to casting. Casting should be your last resort to getting things working, and is usually a sign that something is not quite right.

   Peace!

Asdef Jaker1-Mar-07 7:19

1-Mar-07 7:19

Thank you for your insight!
I changed all occurences of the secondPart definition to const, but I ran into another problem: The code I work on changes the secondPart string after calling the ParsePath(..) method. This is prohibited, because the string is now defined as const... Sigh | :sigh:

If i understand the const char *secondPart = NULL; declaration corectly - it means changeable pointer to constant string - is that right? Do I need to make a copy if I need to change the secondPart string?

Asdef Jaker
What part of "Thou shall not kill" don't you understand? GOD

James R. Twine1-Mar-07 8:46

1-Mar-07 8:46

No, it sounds like it is working correctly. const char * is a pointer to a constant char (a "string"), whereas a char const * is a constant pointer to a (non-const) "string".

const char *pPtrToConstChar = "First Const Const";
char* const pConstPtrToChar = "Second String";
 
pPtrToConstChar = "Second Const String";
// Allowed; the pointer can be changed to point somewhere else

strcpy( <code>pPtrToConstChar</code>, "Test" );
<code>// Fails; the data the pointer points to is constant and cannot be changed.</code>
 
<code>pConstPtrToChar</code> = "Third String";
<code>// Fails; the pointer is constant and cannot be reassigned to point somewher else.</code>

strcpy( pConstPtrToChar, "Test" ); 
//Allowed; the data the pointer points to is not constant and can be changed.

   Note that I am using static strings here, so copying into their memory is technically incorrect but I am trying to demonstrate pointer const-ness as opposed to data const-ness.

   The function is allowed to take a pointer to constant data as a reference, and change the pointer so that it points to other constant data.

   Peace!

std::string

LCI1-Mar-07 3:20

LCI

1-Mar-07 3:20

I am reading from a file after opening using this command

ReadFile(hFile,&strData, 300, &dwbytes, NULL); in a C++ dll

strData is defined as a std::string

say std::string test = strData;

After executing the above command, i get an error .. something about misaligned string. I am not sure what could be going on here. When i debug and watch the values i see strData as {???} but then when i drill down, i actually see the correct data read from the file, but it seems like something is wrong such that strData cannot be accessed

toxcct1-Mar-07 3:27

toxcct

1-Mar-07 3:27

std::string is a class. you cannot pass it as a parameter when the function expects a C-style string (array of character).
please show the definition of ReadFile()

[VisualCalc][Flags Beginner's Guide][CommDialogs new! ] | [Forums Guidelines]

LCI1-Mar-07 3:34

LCI

1-Mar-07 3:34

How would i get around this??
Myabe use a TCHAR or LPVOID in the ReadFile and then once i get the value, convert that to an std::string??
How would that work?
The definition of ReadFile is
BOOL ReadFile(
HANDLE hFile,
LPVOID lpBuffer,
DWORD nNumberOfBytesToRead,
LPDWORD lpNumberOfBytesRead,
LPOVERLAPPED lpOverlapped
);

Parameters
hFile
[in] Handle to the file to be read. The file handle must have been created with the GENERIC_READ access right. For more information, see File Security and Access Rights.
For asynchronous read operations, hFile can be any handle opened with the FILE_FLAG_OVERLAPPED flag by the CreateFile function, or a socket handle returned by the socket or accept function.

Windows Me/98/95: For asynchronous read operations, hFile can be a communications resource opened with the FILE_FLAG_OVERLAPPED flag by CreateFile, or a socket handle returned by socket or accept. You cannot perform asynchronous read operations on mailslots, named pipes, or disk files.

lpBuffer
[out] Pointer to the buffer that receives the data read from the file.
nNumberOfBytesToRead
[in] Number of bytes to be read from the file.
lpNumberOfBytesRead
[out] Pointer to the variable that receives the number of bytes read. ReadFile sets this value to zero before doing any work or error checking. If this parameter is zero when ReadFile returns TRUE on a named pipe, the other end of the message-mode pipe called the WriteFile function with nNumberOfBytesToWrite set to zero.
If lpOverlapped is NULL, lpNumberOfBytesRead cannot be NULL. If lpOverlapped is not NULL, lpNumberOfBytesRead can be NULL. If this is an overlapped read operation, you can get the number of bytes read by calling GetOverlappedResult. If hFile is associated with an I/O completion port, you can get the number of bytes read by calling GetQueuedCompletionStatus.

If I/O completion ports are used and you are using a callback routine to free the memory allocated to the OVERLAPPED structure pointed to by the lpOverlapped parameter, specify NULL as the value of this parameter to avoid a memory corruption problem during the deallocation. This memory corruption problem will cause an invalid number of bytes to be returned in this parameter.

Windows Me/98/95: This parameter cannot be NULL.

lpOverlapped
[in] Pointer to an OVERLAPPED structure. This structure is required if hFile was created with FILE_FLAG_OVERLAPPED.
If hFile was opened with FILE_FLAG_OVERLAPPED, the lpOverlapped parameter must not be NULL. It must point to a valid OVERLAPPED structure. If hFile was created with FILE_FLAG_OVERLAPPED and lpOverlapped is NULL, the function can incorrectly report that the read operation is complete.

If hFile was opened with FILE_FLAG_OVERLAPPED and lpOverlapped is not NULL, the read operation starts at the offset specified in the OVERLAPPED structure and ReadFile may return before the read operation has been completed. In this case, ReadFile returns FALSE and the GetLastError function returns ERROR_IO_PENDING. This allows the calling process to continue while the read operation finishes. The event specified in the OVERLAPPED structure is set to the signaled state upon completion of the read operation.

If hFile was not opened with FILE_FLAG_OVERLAPPED and lpOverlapped is NULL, the read operation starts at the current file position and ReadFile does not return until the operation has been completed.

If hFile is not opened with FILE_FLAG_OVERLAPPED and lpOverlapped is not NULL, the read operation starts at the offset specified in the OVERLAPPED structure. ReadFile does not return until the read operation has been completed.

Windows 95/98/Me: For operations on files, disks, pipes, or mailslots, this parameter must be NULL; a pointer to an OVERLAPPED structure causes the call to fail. However, you can perform overlapped I/O on serial and parallel ports.

toxcct1-Mar-07 3:36

toxcct

1-Mar-07 3:36

i didn't ask for the whole documentation, only the definition, that is

BOOL ReadFile(
    HANDLE hFile,
    LPVOID lpBuffer,
    DWORD nNumberOfBytesToRead,
    LPDWORD lpNumberOfBytesRead,
    LPOVERLAPPED lpOverlapped
);

don't pass a std::string, pass a char*

[VisualCalc][Flags Beginner's Guide][CommDialogs new! ] | [Forums Guidelines]

David Crow1-Mar-07 3:39

1-Mar-07 3:39

LCI wrote:
Myabe use a TCHAR or LPVOID in the ReadFile and then once i get the value, convert that to an std::string??

Yes, that would be just fine. Or you could opt for an ifstream instead, and read directly into a string object.

"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15

"Judge not by the eye but by the heart." - Native American Proverb

LCI1-Mar-07 3:42

LCI

1-Mar-07 3:42

If i were using a TCHAR, how would i convert that to std::string.

Or for that matter and ifstream , don't believe that i ever used one of these.

David Crow1-Mar-07 3:51

1-Mar-07 3:51

LCI wrote:
If i were using a TCHAR, how would i convert that to std::string.

#ifdef _UNICODE
#define tstring wstring
#else
#define tstring string
#endif
 
TCHAR szBuffer[1234];
tstring str = szBuffer;

"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15

"Judge not by the eye but by the heart." - Native American Proverb

Re: std::string [updated]

toxcct1-Mar-07 3:58

toxcct

1-Mar-07 3:58

DavidCrow wrote:
TCHAR szBuffer[1234] = _T("David");

in pounds or in Kgs ? Roll eyes | :rolleyes:

[VisualCalc][Flags Beginner's Guide][CommDialogs new! ] | [Forums Guidelines]

James R. Twine1-Mar-07 6:18