|
The DC you are drawing to is the DC for the whole window, in this case the status bar. So basically anything you draw to it is going to overwrite anything beneath it. What you need to do is calculate the space for each item you are drawing, and make sure it only draws into that rect. My guess is that you need to subtract from the rectangle provided to DrawItem() the width of the gripper, leaving space to draw the gripper. From the picture I see you also have a progress bar, you should also resize that otherwise it is going to get clipped also.
|
|
|
|
|
waldermort wrote: My guess is that you need to subtract from the rectangle provided to DrawItem() the width of the gripper, leaving space to draw the gripper.
Yeah, I figured I could do something like that, but then I need to know if the gripper is over my pane, and what size is the gripper so I know how much to take off. I could calculate it based on what it is on my system, but a differnt OS might have a different sized gripper.
I was hoping someone could tell me what flag I missed when creating the statusbar control so that the rect passed to the DrawItem function would already take the size grip into consideration. Would make things a lot easier.
waldermort wrote: From the picture I see you also have a progress bar, you should also resize that otherwise it is going to get clipped also.
It's not really a progress bar. It is actually just a bitmap that I use to simulate a progress bar control. The problem is that I want it clipped, but that is just not happening right now.
You may be right
I may be crazy
-- Billy Joel --
Within you lies the power for good, use it!!!
|
|
|
|
|
I have write a ftp client , multi-thread to download at the same time.
In every thread, the client send the "REST 100\r\n" command to the ftp server, and response ok. But, the server always return the data from the file header. So, it cannot get the correct data.
Could you help me?
Thanks very much!
Royal (Email: Royal@jiamasoft.com ; MSN: CatchException@hotmail.com )
|
|
|
|
|
Does your FTP server support the REST command? Not all servers do...
Else, are you sending the REST cmd immediately before a data transfer command (RETR or STOR)?
Alcohol. The cause of, and the solution to, all of life's problems - Homer Simpson
|
|
|
|
|
I have try these steps:
(1) -> Logon -> Type I ->PASV -> REST -> RETR ->
(2) -> Logon -> Type I ->REST -> PASV -> RETR ->
When send the REST command to the ftp server ,
return 350 , it's ok.
|
|
|
|
|
Using VS2005...
[EDIT #2]
Nevermind - caused by stupid programmer tricks...
[/EDIT #2]
I have a non-MFC DLL that checks _MSC_VER and _MFC_VER to conditionally compile the code. This seems to work just fine.
HOWEVER, I also have a MFC app that uses the same code, but the compiler seems to ignore those two preprocessor definitions. Here's the code in question:
#ifndef _MFC_VER
#include <windows.h>
#include <stdio.h>
#include <crtdbg.h>
#include <tchar.h>
#if _MSC_VER < 1400
#define TRACE ((void)0)
#else
#define TRACE ((void)__noop)
#endif
#pragma message(" compiling for Win32")
#else
#include "stdafx.h"
#pragma message(" compiling for MFC")
#endif
In the MFC app, the block contained within #ifndef _MFC_VER is active instead of the #else block. As an experiment, I inserted #define _MFC_VER 8.00 above the code you see there, and the #else block became active. Despite the fact that the first block is inactive, the compiler still appears to process the code within the #ifndef _MFC_VER block, generating errors about unexpected endif's and warnings about duplicate TRACE macro definitions.
Does anyone know how to resolve this?
[EDIT]
I moved the following code out of the outermost #ifdef, and that resolved the duplicate definition warning regarding the TRACE macro:
#if _MSC_VER < 1400
#define TRACE ((void)0)
#else
#define TRACE ((void)__noop)
#endif
However, the compiler still doesn't seem to see the _MFC_VER macro at all, and the compiler is still puking out errors regarding unexpected #endif's...
-- modified at 10:25 Sunday 5th November, 2006
-- modified at 10:32 Sunday 5th November, 2006
-- modified at 10:33 Sunday 5th November, 2006
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
|
|
|
|
|
Are you confusing _MFC_VER and _MSC_VER? 
|
|
|
|
|
Ummmm, nooooo. I'm using both.
In any case, one problem was that I had the stdafx include INSIDE the #ifdef. This prevented the definition of _MFC_VER in time to be evaluated, so it appeared to be ignored, when if fact, it wasn't defined in time.
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
|
|
|
|
|
PrabhuDev wrote: is it possible to make a floating control bar to behave like a modal dialog?
Yes. Subclass the control bar and provide a Message loop. Message loop here means the one like in WinMain. This should make your control bar modal.
|
|
|
|
|
PrabhuDev wrote: can u please give me more details regarding this?
Thanks and regards,
Sure. Look up this article by Nish. You will understand I meant.
In this article he talks about how to create modal windows. The same technique will apply to control bars too.
Modal Inputbox[^]
|
|
|
|
|
PrabhuDev wrote: EnableWindow(FALSE);
ShowControlBar(&g_DemoBar, TRUE, FALSE);
MSG msg;
while (GetMessage(&msg, NULL, 0, 0))
{
TranslateMessage(&msg);
DispatchMessage(&msg);
}
EnableWindow(TRUE);
Why are you writing this message loop here and why are you calling EnableWindow(FALSE).
You should write the message loop inside the ShowControlBar function. The message loop should come just after the Control bar is shown. There is no point in writing the message loop here.
There is no need to call EnableWindow anywhere. Look at what nishant has done.
|
|
|
|
|
Hi
I want to create a Russian dialog, I set the dialog resource language to Russian, but when I paste a Russian word into a static text all chars change to questuion mark!
(I've added Russian language to my Windows Languages)
I use Visual Studio 2003, MFC Project(Unicode) and Windows 2000 Professional.
What I must to do?
Thanks
-- modified at 6:42 Sunday 5th November, 2006
|
|
|
|
|
|
Your project must be either UNICODE or MBCS. Also you might want to check you are using a Russian compatible font to display the characters.
|
|
|
|
|
Project is Unicode and I used a Russian compatible font, but it does not work
|
|
|
|
|
Could you show us how you are setting the text to the control?
|
|
|
|
|
I'm not much of a mathematician, so hopefully somebody knows of an easy way to do what I want. Lets say we have a rectangle { 0,0,800,600 }, within that rectangle is another { 200, 200, 400, 300 }. How is it possible to calculate the position and size of the largest rectangle that can be created in the remaining space. In this case it would be { 0,300,800,600 }.
This example is very simple, I would actually have up to 10 smaller rectangles to compensate for. If you are wondering why, I want to calculate the best place to draw text in between the various child controls on a window.
|
|
|
|
|
In general there are four possible rectangles to consider, the upper one, the lower one, the left one and the right one. If the coordinates of the outer rectangle are (ol, ot)-(or, ob) (“o” for outer and “l”, “t”, r” & “b” for left, top, right and bottom, respectively) and the coordinated of the inner rectangle are (il, it)-(ir, ib) are the coordinates on the inner rectangle (“i” for inner) the four largest rectangles that fit in the remaining space are:
Top:
(ol, ot)-(or, it)
Bottom:
(ol, ib)-(or, ob)
Left:
(ol, ot)-(il, ob)
Right:
(ir, ot)-(or, ob)
All that remains is to calculate their areas and choose the biggest one.
[ADDED]
I just noticed you want many inner rectanges and not just one. This makes it harder. Obviously my method assumes just one.
Steve
|
|
|
|
|
I took basically the same approach, except that I only calculated the space to the left and right of the inner rectangle. It serves the window at hand which has the appearance of a tool bar with buttons to the left and right and a large space in the center. But I ran into a few problems while trying to calculate vertiacal space at the same time as horizontal space. Though through your explanation I can see how it can be achieved.
Due to the nature of the program, I think it best to leave this particular method as virtual. Thanks for your input.
|
|
|
|
|
Excellent. Thank you. I was having trouble finding that wizard, I had only seen it via the context menu on the dialog, and that for some reason did not have all the base classes.
|
|
|
|
|
Quite a few of the articles on this site instruct to do something similar to the following with VS7:
Derive a new CListCtrl based class (here CMyListCtrl). In the VC IDE, this is as simple as selcting 'Add Class...' from the MFC Class wizard then, in the new class dialog, naming the control and selecting CListCtrl as the base class in the drop down list.
However I am using VS2005(VC++8) and the only base classes listed in the wizard are CDialog, CDHtmlDialog, CFormView, COlePropertyPage, and CPropertyPage. I ran into this problem with a CTabCtrl article also. The code compiles fine from the article though, I suppose i'm missing something simple.
Thanks!
|
|
|
|
|
Have you created the application as a standard MFC application?
File->New->Project select MFC in left pane, select MFC app. in right pane. Type solution name and OK.
Click finish to accept standard MFC settings for this test.
Select the "class" tab in the solution explorer, and right click the application name at the top. Select Add->Class from the drop down list. Ensure MFC is selected in both panes and click Add. Click the pull down arrow on the Base Class: combo box, and you should have all the classes available. If not there is something wrong with you installation.
Hope that is what youare trying to find out.
|
|
|
|
|
Hello
Does anyone know how i can use "FOR XML" expilicit command with ODBC in Visual C++ 6.0?
thx
-- modified at 20:39 Saturday 4th November, 2006
|
|
|
|
|
I'm asking this question because i tried many times to find a way to change connection parameters such as times out , number of retries , login , password every thing when the user intend to do so when i found a function called RASdialup() and other functions and by filling the RASDIALPARAMS sructure and after the excution of prog finally and unfortunatly i found RAS dial up not useful since the adsl modem has been used, after i decided to look back to WININET library .. another problem found is we can only change the 'PROXY' authentication :
//hOpen is the HINTERNET handle created by Internet Open
//strUsername is a string buffer that contains the proxy username
InternetSetOption(hOpen, INTERNET_OPTION_PROXY_USERNAME,
strUsername, strlen(strUsername)+1);
//strPassword is the buffer that contains the proxy password
InternetSetOption(hOpen, INTERNET_OPTION_PROXY_PASSWORD,
strPassword, strlen(strPassword)+1);
the second flag|parameter INTERNET_OPTION_PROXY_USERNAME can be changed only to INTERNET_OPTION_USERNAME but WITH condition calling InternetConnect function and return a handle hConnect, (for my point of view i want the first flag to be NULL to indicate that we can change the DEFAULT SETTINGS).
Note that there is a way to use INTERNET_OPTION_PER_CONNECTION_OPTION as a customized option the default settings changed well and we can use LAN connection options but without authentications change!! :
BOOL SetConnectionOptions()
{
INTERNET_PER_CONN_OPTION_LIST list;
BOOL bReturn;
DWORD dwBufSize = sizeof(list);
// fill out list struct
list.dwSize = sizeof(list);
// NULL == LAN, otherwise connectoid name
list.pszConnection = NULL;
// set three options
list.dwOptionCount = 3;
list.pOptions = new INTERNET_PER_CONN_OPTION[3];
// make sure the memory was allocated
if(NULL == list.pOptions)
{
//return FALSE if the memory wasn't allocated
return FALSE;
}
// set flags
list.pOptions[0].dwOption = INTERNET_PER_CONN_FLAGS;
list.pOptions[0].Value.dwValue = PROXY_TYPE_DIRECT | PROXY_TYPE_PROXY;
// set proxy name
list.pOptions[1].dwOption = INTERNET_PER_CONN_PROXY_SERVER;
list.pOptions[1].Value.pszValue = "http://proxy:80";
// set proxy override
list.pOptions[2].dwOption = INTERNET_PER_CONN_PROXY_BYPASS;
list.pOptions[2].Value.pszValue = "local";
// set the options on the connection
bReturn = InternetSetOption(NULL,
INTERNET_OPTION_PER_CONNECTION_OPTION, &list, dwBufSize);
//free the allocated memory
delete [] list.pOptions;
return bReturn;
}
If still not understand ignore it and help for how to change all default connection settings with any type of connection (LAN/ADSL/PHONE DIAL UP) ... I am really stuck 
Anyone who considers arithmetical methods of producing random numbers is, of course, in a state of sin.
John von Neumann
|
|
|
|
|
I've seen some application that customise buttons on the title bar of a window. There are tutorials on CodeProject about this. My question is, although I can customise a button on my own application title bar, is there a way I can do this globally for all windows? I want to write an extension to add a button/function to every window/application.
Can anyone point me in the right direction of where to begin and any decent reference material? 
http://www.asura.co.uk
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
