|
hai friends,
in my room, due to lack of air flow, my system is getting heated up.
is this the only reason why my system is getting heated up?
because, when i run the task manager and see the performance, then it seems to be reasonable and hte processor is certainly not busy due to the daemons and back running programs,
kindly confirm my doubt.
|
|
|
|
|
If you over-clock your CPU heat would/could become an issue.
Define lack of air flow: No air conditioning? Hermetically sealed? No windows?
Any sufficiently advanced technology is indistinguishable from magic. Arthur C. Clarke
|
|
|
|
|
Hi
1st of al ur assumption is right.
But this can happn due to following.
This condition will arises if u have takem a very long time after u have last work on it.
Somtimes in very short time this may happen cause of computions and large amount of applications are running simuntaniously.
This can be reduce by external cooling(Air/Water[yes! It is also available and it is very efficient])
All the Best Mate.
Have a good Day
Believe Yourself :->
|
|
|
|
|
iam damn sure that, my system is not haveng any back running huge applications when it turned slow.
i confirmed the same from task manager.
|
|
|
|
|
The usual culprits for a suddenly slow system are a recently updated virus scanner, a virus, a bloated registry or a hardware problem. You can usually check if your system is clocking itself back to avoid overheating by looking in the BIOS after a reboot or with tools provided with the motherboard if you built the system yourself. The BIOs should at least should you the CPU temperature. If it's < 55 for an Intel or < 65 for an AMD then I'd be surprised to see any slow down at all. Much more likely a software/virus/OS problem.
Nothing is exactly what it seems but everything with seems can be unpicked.
|
|
|
|
|
with reference to my previous post
"short cut way to switch between two IP addresses in a single system." (fifth one down from here),
jerry has suggested me to go for a batch file.
but i tried ipconfig from the command line and iam unable to change the ip address.
iam able to only see it here.
can anybody suggest some command through which i can change the ip address from command line.
thanks in advance.
-- modified at 7:58 Saturday 6th October, 2007
|
|
|
|
|
this problem is solved by one of my colleagues using netsh command.
any more suggestions are welcome.
|
|
|
|
|
setting the ip address is ok.
but to set the preferred dns server and alternate dns server through netsh is not achieved.
any ideas?
|
|
|
|
|
Why don't you just set up two network connections on the same NIC, and then enable/disable them depending on which network you want to use? Two clicks to change connections, and they'll hold all the relevant IP/DNS information for you.
|
|
|
|
|
thanks,
Craster wrote: Why don't you just set up two network connections on the same NIC,
can you just explain more on how to do it?
|
|
|
|
|
Open the Network Connections applet from within Control Panel. Click the "Create a new connection" button.
"A good athlete is the result of a good and worthy opponent." - David Crow
"To have a respect for ourselves guides our morals; to have deference for others governs our manners." - Laurence Sterne
|
|
|
|
|
thanks david,
DavidCrow wrote: Open the Network Connections applet from within Control Panel. Click the "Create a new connection" button.
but i tried the same and could not establish a new conection.
the wizard is taing me through a couple of screens and on clicking finish, nothing happens.
i contacted my network administrator also, but he could not solve it.
remember that,
i have only on network card in my system.
|
|
|
|
|
however, i got the problem solved using netsh command in the batch files.
but here in netsh, i could not configure the alternate dns server.
any ideas
|
|
|
|
|
it will help you
netsh interface ipv4 add dnsserver name=""<id>" address=<dnsip>index=1
|
|
|
|
|
hi all,
i am facing this problem recently. I am using Windows XP Professional.after my machine is booted, the local area network alone takes time (say 10 min) to load(dont know a better word) to appear in the system tray. in that 10 mintues duration, i am not able to do work on any environment.
I am not able to open a word/excel/pdf documents.When i open Visual Studio and run any application, it says binding handle is invalid.
When i contacted my administrator, he says there is virus in the machine and has to be formatted.
But after that initial 10 mints(i mean after the local area network is loaded) i am able to continue working as usual and i have no problems.And i scanned my machine for viruses.it says no virus .
Could there be a possibility of spyware??
What could be the problem? has anyone faced this before?
I dont particularly like to format my machine.
Thanks in advance.
Regards
Anuradha
|
|
|
|
|
It's probably not a virus or spyware. After you login, hit Ctrl-Shift-Esc to bring up Task Manager. Click on the Processes tab and see which process is taking up all the CPU's time.
We has an issue around here where it was a home-brewed AutoArchive app running out of the domain login script that hung the machine for about 10 minutes.
|
|
|
|
|
hi,
thanks for your reply. after logging in, i find that the explorer.exe,svchost.exe (i think its the antivirus software -macfee) are taking CPU time.
I am not aware of network administration.so i need advices on how i should proceed..
could it be a problem in the local network connection?
Any suggestions??
Also i have another question. if i uninstall macfee from my machine, will it affect .NET. i heard from many people that if i uninstall macfee, it removes some of the .net DLLs too!!!!!!
-- modified at 3:21 Saturday 6th October, 2007
Thanks in advance.
Regards
Anuradha
|
|
|
|
|
why dont you disable your LAN and then reboot.
when ever you want it then you can enable it and disable before shutting down.
|
|
|
|
|
When this happens again, open the TaskManager and get the ProcessId of the SVCHOST that's taking up the CPU time. Then open a CMD prompt and type (I'm assuming your using Windows XP):
tasklist /FI "PID eq ProcessId" /SVC
and hit Enter. This will tell you the names of all the services running in that service host process.
anu81 wrote: could it be a problem in the local network connection?
I doubt it.
anu81 wrote: Also i have another question. if i uninstall macfee from my machine, will it affect .NET. i heard from many people that if i uninstall macfee, it removes some of the .net DLLs too!!!!!!
Since I don't use McAfee at all, I've got nothing to uninstall to test it. It SHOULDN'T cause a problem when uninstalled. If it removes some the .NET Framework stuff, all you have to do is reinstall the .NET Framework versions you're using.
|
|
|
|
|
How much ram do you have?
Do you have IE7 installed along with McAfee?
If your answer is yes to the second question and you have less than 1.5g of ram you may consider either rolling back IE7 and McAfree or increasing your ram to 2g.
Any sufficiently advanced technology is indistinguishable from magic. Arthur C. Clarke
|
|
|
|
|
hi all,
Thanks for your suggestions.
chandu wrote :
why dont you disable your LAN and then reboot.
i tried that too.but still the same problem.
Jerry Hammond wrote:
How much ram do you have?
I have 1 GB of ram
Do you have IE7 installed along with McAfee?
no.i have ie6 in my machine. and Macfee.
Dave Kreskowiak wrote:
tasklist /FI "PID eq ProcessId" /SVC
trying your suggestion, i found that the svchost.exe is hosting the following services.
LmHosts, RemoteRegistry, SSDPSRV, upnphost, WebClient,stisvc
DcomLaunch, TermService,RpcSs, HTTPFilter
AppMgmt, AudioSrv, BITS, Browser, CryptSvc,Dhcp, dmserver, ERSvc, EventSystem,FastUserSwitchingCompatibility, helpsvc,HidServ, lanmanserver, lanmanworkstation,Messenger, Netman, Nla, RasMan, Schedule,seclogon, SENS, SharedAccess, ShellHWDetection, srservice, TapiSrv,Themes, TrkWks, W32Time, winmgmt, wscsvc, wuauserv, WZCSVC, Dnscache
What could be the problem?
any other suggestions please.
thanks again for all your help
Regards
Anuradha
|
|
|
|
|
as dave suggested, you can use task manager to see the performance of the system in the first 10 minutes.
no sooner you see your desktop, wake up the taskmanager,
and see the performance of the different processes in live,
then you can find some thing out there.
|
|
|
|
|
my network administrator has some thing to advice.
he says as follows.
1.go to safemode.(press F8 while booting up)
2.go to start>programs>accessories>systemtools>system restore.
3.select the date from which, you are facing the problem.
4.click restore.
i suggest that,
you perform this activity in the presence of your network administrator.
because,
he personally must have seen your problem, and apply his intellect based on this clue.
|
|
|
|
|
|
Hello everyone...
Just a simple qn..
I have a system running on Vista Home Basic and have logged in as a user(with admin permissions)
However when i tried running a registry modification c#.net application, JIT says, registry access is denied and use ".NET Framework 2.0 Configuration Tool" to give the application permissions.
I tried , added my appltn to configure, but nothing worked out. I didnt see how could I give my application the permission.
Any help appreciated!
D
|
|
|
|