ASP.NET

20-Jun-07 5:04

Thats a pretty trivial requirement, what problems are you having with it?

Re: How to

alwinSCH20-Jun-07 5:06

alwinSCH

20-Jun-07 5:06

I would like to have something like this!

but how should i begin, can anyone put me in the right direction...

Re: How to

badgrs20-Jun-07 5:14

deployment in VB.net VS 2003???

20-Jun-07 5:14

Check out the data tutorials on www.asp.net, they're a great place to start and will show you how to do what you want.

Vimalsoft(Pty) Ltd20-Jun-07 4:21

Vimalsoft(Pty) Ltd

20-Jun-07 4:21

Am new .vb.net, but i made it to the end, i understand part. in vb6 the Package and Deployment Wizard did everything for you, package and make setup files and there you go it can be setup. i know here you supposed to install .Net framework in the system that you going to install the Application. but cant you include the .Net in your Application to be installed automatically if its not installed? , cant it install SQlclient if its not installed,. mybe i have read wrong Articles. i have googled the Deployment, but most words being mentioned are "Deplayment is Simpler in Visual Studio.Net than in the Ealier version". i dont bealive until i experince that. Please help me with Deployment or point to a Step by Step Article that Best Explain the Deployment. am using VS2003

Thanks

Vuyiswa

Re: deployment in VB.net VS 2003???

MartyExodus20-Jun-07 5:54

MartyExodus

20-Jun-07 5:54

I don't have it in front of me, so i can't tell you for certain, but I do believe there was a way to install the .NET Framework with your app.

I'm not sure on SQLClient....never used it.

If nothing else, Microsoft's site has a guide on how to deploy the .NET Framework.

Sorry I can't post a link, hope it helps anyhow.

------------------------
using System.People;

Person me = new Person();

me.Certifications = null;
me.Experience = little;
me.WantsToLearn = true;
me.InSchool = true;

me.AskQuestions("C# .NET 2003");

Re: deployment in VB.net VS 2003???

Vimalsoft(Pty) Ltd20-Jun-07 19:37

Vimalsoft(Pty) Ltd

20-Jun-07 19:37

Its ok

Vuyiswa

Suggest some method for treeview with checkbox

AbrahamErnest20-Jun-07 3:46

AbrahamErnest

20-Jun-07 3:46

Hi All,
I want to display some data in tree format.

I must be able to populate this tree using a dataset from a Select statement.

The child nodes must have checkbox against each other. This must be checked on/off depending upon the Boolean value in the table.

After populating the tree, when the user checks/uncheck the checkbox in the child nodes, it must update the table.

Can anybody suggest some way to do this? Is there any asp control to do this effectively?

Thanks

Re: Suggest some method for treeview with checkbox

ToddHileHoffer20-Jun-07 4:47

ToddHileHoffer

20-Jun-07 4:47

I suggest using a repeater. You'll need two dataTables in your dataset parent and child. In the repeater you can use Div tags or HTML Tables to get the display you want. Then use a CheckBoxList in the item template. Use the repeaters OnItemDataBound event to populate your check box list.

GameFly free trial

Multiple UpdatePanel with UpdatePanelAnimationExtender

Engin KIRMACI20-Jun-07 3:33

Engin KIRMACI

20-Jun-07 3:33

Hi everybody
I'm using two updatepanel and two updatepanelanimation for eachone. When i triggered one panel, both updatepanelanimations play. But i want only one plays when i triggered. I didn't find solution. Can anyone help?

Re: Multiple UpdatePanel with UpdatePanelAnimationExtender

badgrs20-Jun-07 3:47

Re: Multiple UpdatePanel with UpdatePanelAnimationExtender

20-Jun-07 3:47

Use the TargetControlID property of the extender, as per the documentation

Engin KIRMACI20-Jun-07 8:46

Engin KIRMACI

20-Jun-07 8:46

I already used it. These are my codes. I have two updatepanel and two updatepanelanimation. <code>
<cc1:UpdatePanelAnimationExtender ID="UpdatePanelAnimationExtender1" runat="server"

TargetControlID="UpdatePanel1">
<Animations>
<OnUpdating>
<Sequence>
<Parallel duration=".25" Fps="30">
<FadeOut/>
</Parallel>
</Sequence>
</OnUpdating>
<OnUpdated>
<Sequence>
<Parallel duration=".25" Fps="30">
<FadeIn/>
</Parallel>
</Sequence>
</OnUpdated>
</Animations>
</cc1:UpdatePanelAnimationExtender>

<asp:UpdatePanel ID="UpdatePanel1" runat="server" UpdateMode="Conditional">
<ContentTemplate>
Last refresh <%=DateTime.Now.ToString() %>
</ContentTemplate>
<Triggers>
<asp:AsyncPostBackTrigger ControlID="LinkButton2" EventName="Click" />
</Triggers>
</asp:UpdatePanel>

<cc1:UpdatePanelAnimationExtender ID="UpdatePanelAnimationExtender3" runat="server"

TargetControlID="UpdatePanel3">
<Animations>
<OnUpdating>
<Sequence>
<Parallel duration=".25" Fps="30">
<FadeOut/>
</Parallel>
</Sequence>
</OnUpdating>
<OnUpdated>
<Sequence>
<Parallel duration=".25" Fps="30">
<FadeIn/>
</Parallel>
</Sequence>
</OnUpdated>
</Animations>
</cc1:UpdatePanelAnimationExtender>

<asp:UpdatePanel ID="UpdatePanel3" runat="server" UpdateMode="Conditional">
<ContentTemplate>
Last refresh <%=DateTime.Now.ToString() %>
</ContentTemplate>
<Triggers>
<asp:AsyncPostBackTrigger ControlID="LinkButton1" EventName="Click" />
</Triggers>
</asp:UpdatePanel></code>

how to create role in specified application

mohd imran abdul aziz20-Jun-07 3:25

mohd imran abdul aziz

20-Jun-07 3:25

Dear all,
I am using asp.net 2.0 and C# using Visual Studio2005.

I am trying to use membership feature of asp.net 2.0.Now created application id for my project but when I am trying to create roles through ASP.net configuration. It creates roles in other (blank name) application. I would like to create in same application.
How to do that.

Please help

thanks

regards
imran khan

Print all files in folder- Its very urgent

Saivjil20-Jun-07 2:22

Saivjil

20-Jun-07 2:22

Hey all
Can any One help me out from this Issue.
I want code which takes documentfilepath as an argument and print all the files existing in the folder.

As i created a table Name:SpoolerTable which takes all the file paths existing in the folder and stores in a column in the spooler table and i am colleting this files or folder path and i am passing as an argument to the function which accepts files paths.
The problem is that i am not able to write the code for the printing functionality.

Can any one help me out from this situation.
Regards
Sai

SaiRamk@vjil.com

Re: Print all files in folder- Its very urgent

Not Active20-Jun-07 2:33

Not Active

20-Jun-07 2:33

It's always very urgent. This site is populated by people willing to help but don't expect everyone to share your same sense of urgency.

Don't use Urgent, Very Urgent, or any combination of the term in your title.

only two letters away from being an asset

Re: Print all files in folder- Its very urgent

ed^nrgc20-Jun-07 5:05

ed^nrgc

20-Jun-07 5:05

You should have started your homework earlier.

Re: Cannot Find References Folder in Asp.net 2.0

Sandeep Akhare20-Jun-07 2:16

Re: Cannot Find References Folder in Asp.net 2.0

20-Jun-07 2:16

dhanabalanr wrote:

dhanabalanr wrote:
Suppose i would like to remove that system.data dll. How can remove it (In VS 2003 by right click on the dll name we can remove it which is located in the references folder

If i would like to add system.data dll then i can add it by add reference by right clicking the project in solution explorer.

Yes but System.data dll will get added by deafult so try with different dll that is not present already there

dhanabalanr wrote:
1. where that references has been added and how can view it. (In VS 2003 we can view them in the references folder in the same project in solution explorer)

Are you able to see bin folder in that you can see all your references
Yes in the same way right click the dll in solution Explorer and delete it that will get removed from your project

I think you know all but just making some fun out here

Thanks and Regards
Sandeep

If If you look at what you do not have in life, you don't have anything,
If you look at what you have in life, you have everything... "

dhanabalanr20-Jun-07 2:34

dhanabalanr

20-Jun-07 2:34

Sandeep,

Thanks pal. I'm not joking.
First of all there was not Bin folder in my sample project. Then created it by right click on the project in solution explorer and in that Add Asp.net Folder and Click Bin. It created Bin folder.
Then i tried to add system.data dll it is added but i could not find them in Bin. But then i added some other dll than base system dlls like example.dll. i could see it on Bin Dll.

Then where can i find that system.data dll in my project. how can i remove that. This is what i need. sorry for interrupting you.
P.S
I'm working on VS 2005

Thanks in advance

Re: Cannot Find References Folder in Asp.net 2.0

Sandeep Akhare20-Jun-07 2:58

compilation process in dot net

20-Jun-07 2:58

VS 2005 will not show bin folder by default you can see it by adding it or adding a new reference.

dhanabalanr wrote:
tried to add system.data dll it is added but i could not find them in Bin.

Beacuse By deafult it is in your application
Wehn you craete a web application by default namespaces that get added are
sing System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;

dhanabalanr wrote:
where can i find that system.data dll in my project. how can i remove that.

All the Deafult namespace or DOT NEt references not added in the namespace as they are present in Framework CLR knows these dll Only the DLL that CLR don't know i.e not are in the Framework are to be there in bin folder
If you don't want System.Data namespace in yor application just remove the it from your .cs file ............
If you add a COM dll ot other prject dll that will be added in Bin folder as seperate dll.
I think you should read a book CLR via C# by Jeffrey Richter

Thanks and Regards
Sandeep

If If you look at what you do not have in life, you don't have anything,
If you look at what you have in life, you have everything... "

saqib8220-Jun-07 2:14

saqib82

20-Jun-07 2:14

Hi How to skip the process of the creation of assembly files in dot net? is there a way that we can directly create the .exe files so that the compilation process can become faster.

Regards

sAqIb

"Our scientific power has outrun our spiritual power. We have guided missiles and misguided men."
Dr. Martin Luther King Jr.

Sandeep Akhare20-Jun-07 2:26

20-Jun-07 2:26

saqib82 wrote:
How to skip the process of the creation of assembly files in dot net?

Assembly will get created when you compile your project...
CLR at run time converts IL present in the Assembly into native CPU instructions at run time
So do you want to ask to create native code directly instead of IL ?
< Added>

Assmebly contains Metadata, Manifest,other resources, IL ,PE header,CLR header
which are required to run your application

Thanks and Regards
Sandeep

If If you look at what you do not have in life, you don't have anything,
If you look at what you have in life, you have everything... "

saqib8220-Jun-07 2:29

saqib82

20-Jun-07 2:29

yes, i want to create the native code directly instead of IL. Is there any way?

sAqIb

"Our scientific power has outrun our spiritual power. We have guided missiles and misguided men."
Dr. Martin Luther King Jr.

Sandeep Akhare20-Jun-07 2:40

20-Jun-07 2:40

saqib82 wrote:
yes, i want to create the native code directly instead of IL. Is there any w

I don't know how to create directly native cpu code from C#
One way that i know is give up C# and start to write core languages like C

Thanks and Regards
Sandeep

If If you look at what you do not have in life, you don't have anything,
If you look at what you have in life, you have everything... "

saqib8220-Jun-07 2:46

saqib82

20-Jun-07 2:46

you are right. But i have heard that there is some way to do that. May be there is some tool or add-in to do this.

Regards

sAqIb

"Our scientific power has outrun our spiritual power. We have guided missiles and misguided men."
Dr. Martin Luther King Jr.

Sandeep Akhare20-Jun-07 3:14

20-Jun-07 3:14

One thing that you can do is Publish your web site that will precompiled code but not directly native CPU code.

saqib82 wrote:
But i have heard that there is some way to do that.

If it is then Micrsoft would not be Operating system specific it would run on other than Windows * ...

Thanks and Regards
Sandeep

If If you look at what you do not have in life, you don't have anything,
If you look at what you have in life, you have everything... "

badgrs20-Jun-07 3:43