This page discusses many ways applications can sample randomized content by transforming the numbers produced by an underlying source of random numbers, such as numbers produced by a pseudorandom number generator, and offers pseudocode and Python sample code for many of these methods.
Introduction
This page catalogs randomization methods and sampling methods. A randomization or sampling method is driven by a "source of random numbers" and produces numbers or other values called random variates. These variates are the result of the randomization. (The "source of random numbers" is often simulated in practice by socalled pseudorandom number generators, or PRNGs.) This document covers many methods, including—
This page is focused on randomization and sampling methods that exactly sample from the distribution described, without introducing additional errors beyond those already present in the inputs (and assuming that an ideal "source of random numbers" is available). This will be the case if there is a finite number of values to choose from. But for the normal distribution and other distributions that take on infinitely many values, there will always be some level of approximation involved; in this case, the focus of this page is on methods that minimize the error they introduce.
This document shows pseudocode for many of the methods, and sample Python code that implements many of the methods in this document is available, together with documentation for the code.
The randomization methods presented on this page assume we have an endless source of numbers chosen independently at random and with a uniform distribution. For more information, see "Sources of Random Numbers" in the appendix.
In general, the following are outside the scope of this document:
 This document does not cover how to choose an underlying PRNG (or device or program that simulates a "source of random numbers") for a particular application, including in terms of security, performance, and quality. I have written more on recommendations in another document.
 This document does not include algorithms for specific PRNGs, such as Mersenne Twister, PCG, xorshift, linear congruential generators, or generators based on hash functions.
 This document does not cover how to test PRNGs for correctness or adequacy, and the same applies to other devices and programs that simulate a "source of random numbers". Testing is covered, for example, in "Testing PRNGs for HighQuality Randomness".
 This document does not explain how to specify or generate "seeds" for use in PRNGs. This is covered in detail elsewhere.
 This document does not show how to generate random security parameters such as encryption keys.
 This document does not cover randomness extraction (also known as unbiasing, deskewing, or whitening). See my Note on Randomness Extraction.
 "Variance reduction" methods, such as importance sampling or common random numbers, are outside the scope of this document.
In addition, this page is not focused on sampling methods used for computer graphics rendering (such as Poisson disk sampling, multiple importance sampling, blue noise, and gradient noise), because this application tends to give performance and visual acceptability a greater importance than accuracy and exact sampling.
About This Document
This is an opensource document; for an updated version, see the source code or its rendering on GitHub. You can send comments on this document either on CodeProject or on the GitHub issues page.
My audience for this article is computer programmers with mathematics knowledge, but little or no familiarity with calculus.
I encourage readers to implement any of the algorithms given in this page, and report their implementation experiences. In particular, I seek comments on the following aspects:
 Are the algorithms in this article easy to implement? Is each algorithm written so that someone could write code for that algorithm after reading the article?
 Does this article have errors that should be corrected?
 Are there ways to make this article more useful to the target audience?
Comments on other aspects of this document are welcome.
Contents
Notation
In this document:
 The pseudocode conventions apply to this document.
 The following notation for intervals is used: [
a
, b
) means "a
or greater, but less than b
". (a
, b
) means "greater than a
, but less than b
". (a
, b
] means "greater than a
and less than or equal to b
". [a
, b
] means "a
or greater and b
or less". log1p(x)
is equivalent to ln(1 + x)
and is a "robust" alternative to ln(1 + x)
where x
is a floatingpoint number (Pedersen 2018)[^1]. MakeRatio(n, d)
creates a rational number with the given numerator n
and denominator d
. Sum(list)
calculates the sum of the numbers in the given list of integers or rational numbers. (Summing floatingpoint numbers naïvely can introduce roundoff errors.)
Uniform Random Integers
This section shows how to derive independent uniform random integers with the help of a "source of random numbers" (or a device or program that simulates that source).
This section describes four methods: RNDINT
, RNDINTEXC
, RNDINTRANGE
, RNDINTEXCRANGE
. Of these, RNDINT
, described next, can serve as the basis for the remaining methods.
RNDINT
: Random Integers in [0, N]
In this document, RNDINT(maxInclusive)
is the core method in this document; it derives independent uniform integers in the interval [0, maxInclusive
] from a "source of random numbers"[^2]. In the pseudocode below, which implements RNDINT
:
NEXTRAND()
reads the next number generated by a "source of (uniform) random numbers" as defined in the appendix (an endless source of numbers, each of which is chosen independently of any other choice and with a uniform distribution). As noted in the appendix, a pseudorandom number generator can simulate this source in practice. For this method, the source can have a nonuniform instead of uniform distribution. MODULUS
is the number of different outcomes possible with that source.
Specifically:
If the underlying source produces:  Then NEXTRAND() is:  And MODULUS is: 
Nonuniform numbers[^3].  The next bit from a new source formed by taking the underlying source's outputs as input to a randomness extraction technique to produce independent unbiased random bits (zeros or ones).  2. 
Uniform numbers not described below.  Same as above.  2^{n}. 
Uniform 32bit nonnegative integers.  The next number from the source.  2^{32}. 
Uniform 64bit nonnegative integers.  The next number from the source.  2^{64}. 
Uniform integers in the interval [0, n).  The next number from the source.  n. 
Uniform numbers in the interval [0, 1) known to be evenly spaced by a number p (for example, dSFMT).  The next number from the source, multiplied by p.  1/p. 
Uniform numbers in the interval [0, 1), where numbers in [0, 0.5) and those in [0.5, 1) are known to occur with equal probability (for example, Java's Math.random() ).  0 if the source outputs a number less than 0.5, or 1 otherwise.  2. 
METHOD RndIntHelperNonPowerOfTwo(maxInclusive)
if maxInclusive <= MODULUS  1:
// NOTE: If the programming language implements
// division with two integers by discarding the result's
// fractional part, the division can be used as is without
// using a "floor" function.
nPlusOne = maxInclusive + 1
maxexc = floor((MODULUS  1) / nPlusOne) * nPlusOne
while true // until a value is returned
ret = NEXTRAND()
if ret < nPlusOne: return ret
if ret < maxexc: return rem(ret, nPlusOne)
end
else
cx = floor(maxInclusive / MODULUS) + 1
while true // until a value is returned
ret = cx * NEXTRAND()
// NOTE: The addition operation below should
// check for integer overflow and should reject the
// number if overflow would result.
ret = ret + RNDINT(cx  1)
if ret <= maxInclusive: return ret
end
end
END METHOD
METHOD RndIntHelperPowerOfTwo(maxInclusive)
// NOTE: Finds the number of bits minus 1 needed
// to represent MODULUS (in other words, the number
// of random bits returned by NEXTRAND() ). This will
// be a constant here, though.
modBits = ln(MODULUS)/ln(2)
// Lumbroso's Fast Dice Roller.
x = 1
y = 0
nextBit = modBits
rngv = 0
while true // until a value is returned
if nextBit >= modBits
nextBit = 0
rngv = NEXTRAND()
end
x = x * 2
y = y * 2 + rem(rngv, 2)
rngv = floor(rngv / 2)
nextBit = nextBit + 1
if x > maxInclusive
if y <= maxInclusive: return y
x = x  maxInclusive  1
y = y  maxInclusive  1
end
end
END METHOD
METHOD RNDINT(maxInclusive)
// maxInclusive must be 0 or greater
if maxInclusive < 0: return error
if maxInclusive == 0: return 0
if maxInclusive == MODULUS  1: return NEXTRAND()
// NOTE: Finds the number of bits minus 1 needed
// to represent MODULUS (if it's a power of 2).
// This will be a constant here, though.
modBits=ln(MODULUS)/ln(2)
if floor(modBits) == modBits // Is an integer
return RndIntHelperPowerOfTwo(maxInclusive)
else
return RndIntHelperNonPowerOfTwo(maxInclusive)
end
END METHOD
The table below shows algorithms that have been proposed for choosing an integer uniformly at random. Some are unbiased (exact) and others are biased, but in general, the algorithm can be unbiased only if it runs forever in the worst case. The algorithms listed take n
as a parameter, where n = maxInclusive + 1
, and thus sample from the interval [0, n
). (The column "Unbiased?" means whether the algorithm generates random integers without bias, even if n
is not a power of 2.)
Algorithm  Optimal?  Unbiased?  Time Complexity 
Rejection sampling: Sample in a bigger range until a sampled number fits the smaller range.  Not always  Yes  Runs forever in worst case 
Multiplyandshift reduction: Generate bignumber , an integer made of k unbiased bits, where k is much greater than n , then find (bignumber * n) >> k (see (Lemire 2016)[^4], (Lemire 2018)[^5], and the "Integer Multiplication" algorithm surveyed by M. O'Neill).  No  No  Constant 
Modulo reduction: Generate bignumber as above, then find rem(bignumber, n) .  No  No  Constant 
Fast Dice Roller (Lumbroso 2013)[^6] (see pseudocode above).  Yes  Yes  Runs forever in worst case 
Math Forum (2004)[^7] or (Mennucci 2018)[^8] (batching/recycling random bits).  Yes  Yes  Runs forever in worst case 
"FP Multiply" surveyed by M. O'Neill.  No  No  Constant 
Algorithm in "Conclusion" section by O'Neill.  No  Yes  Runs forever in worst case 
"Debiased" and "Bitmask with Rejection" surveyed by M. O'Neill.  No  Yes  Runs forever in worst case 
Notes:
RNDINT
as a binary tree walker. Donald E. Knuth and Andrew C. Yao (1976)[^9] showed that any algorithm that generates random integers using random unbiased bits (each bit is 0 or 1 with equal probability) can be described as a binary tree (also known as a DDG tree or discrete distribution generating tree). (This also applies to RNDINT
algorithms.) Random unbiased bits trace a path in this tree, and each leaf (terminal node) in the tree represents an outcome. In the case of RNDINT(maxInclusive)
, there are n = maxInclusive + 1
outcomes that each occur with probability 1/n
.
Knuth and Yao showed that any optimal DDG tree algorithm needs at least log2(n)
and at most log2(n) + 2
bits on average (where log2(x) = ln(x)/ln(2)
).[^10] But as they also showed, for the algorithm to be unbiased (exact), it must run forever in the worst case, even if it uses few random bits on average (that is, there is no way in general to "fix" this worst case while remaining unbiased). This is because 1/n
will have an infinite run of base2 digits except when n
is a power of 2, so that the resulting DDG tree will have to either be infinitely deep, or include "rejection leaves" at the end of the tree.
For instance, the modulo reduction method can be represented by a DDG tree in which rejection leaves are replaced with labeled outcomes, but the method is biased because only some outcomes can replace rejection leaves this way. For the same reason, stopping the rejection sampler after a fixed number of tries likewise leads to bias. However, which outcomes are biased this way depends on the algorithm.  Reducing "bit waste". Any implementation of
RNDINT
needs at least log2(n)
bits per chosen integer on average, as noted above, but most of them use many more. There are various ways to bring an algorithm closer to log2(n)
. They include batching, bit recycling, and randomness extraction, and they are discussed, for example, in the Math Forum page and the Lumbroso and Mennucci papers referenced above, and in Devroye and Gravel (2020, section 2.3)[^11]. Batching example: To generate three digits from 0 through 9, we can call RNDINT(999)
to generate an integer in [0, 999], then break the number it returns into three digits.  Simulating dice. If we have a (virtual) fair psided die, how can we use it to simulate rolls of a ksided die? This can't be done without "wasting" randomness, unless "every prime number dividing k also divides p" (see "Simulating a dice with a dice" by B. Kloeckner, 2008). However, randomness extraction (see my Note on Randomness Extraction) can turn die rolls into unbiased bits, so that the discussion earlier in this section applies.
RNDINTRANGE
: Random Integers in [N, M]
The naïve way of generating a random integer in the interval [minInclusive
, maxInclusive
], shown below, works well for nonnegative integers and arbitraryprecision integers.
METHOD RNDINTRANGE(minInclusive, maxInclusive)
// minInclusive must not be greater than maxInclusive
if minInclusive > maxInclusive: return error
return minInclusive + RNDINT(maxInclusive  minInclusive)
END METHOD
The naïve approach won't work as well, though, if the integer format can express negative and nonnegative integers and the difference between maxInclusive
and minInclusive
exceeds the highest possible integer for the format. For integer formats that can express—
 every integer in the interval [1 
MAXINT
, MAXINT
] (for example, Java int
, short
, or long
), or  every integer in the interval [
MAXINT
, MAXINT
] (for example, Java float
and double
and .NET's implementation of System.Decimal
),
where MAXINT
is an integer greater than 0, the following pseudocode for RNDINTRANGE
can be used.
METHOD RNDINTRANGE(minInclusive, maxInclusive)
// minInclusive must not be greater than maxInclusive
if minInclusive > maxInclusive: return error
if minInclusive == maxInclusive: return minInclusive
if minInclusive==0: return RNDINT(maxInclusive)
// Difference does not exceed maxInclusive
if minInclusive > 0 or minInclusive + MAXINT >= maxInclusive
return minInclusive + RNDINT(maxInclusive  minInclusive)
end
while true // until a value is returned
ret = RNDINT(MAXINT)
// NOTE: For case 1, use the following line:
if RNDINT(1) == 0: ret = 1  ret
// NOTE: For case 2, use the following three lines
// instead of the preceding line; these lines
// avoid negative zero
// negative = RNDINT(1) == 0
// if negative: ret = 0  ret
// if negative and ret == 0: continue
if ret >= minInclusive and ret <= maxInclusive: return ret
end
END METHOD
RNDINTEXC
: Random Integers in [0, N)
RNDINTEXC(maxExclusive)
, which generates a random integer in the interval [0, maxExclusive
), can be implemented as follows[^12]:
METHOD RNDINTEXC(maxExclusive)
if maxExclusive <= 0: return error
return RNDINT(maxExclusive  1)
END METHOD
Note: RNDINTEXC
is not given as the core random generation method because it's harder to fill integers in popular integer formats with random bits with this method.
RNDINTEXCRANGE
: Random Integers in [N, M)
RNDINTEXCRANGE
returns a random integer in the interval [minInclusive
, maxExclusive
). It can be implemented using RNDINTRANGE
, as the following pseudocode demonstrates.
METHOD RNDINTEXCRANGE(minInclusive, maxExclusive)
if minInclusive >= maxExclusive: return error
if minInclusive >=0: return RNDINTRANGE(
minInclusive, maxExclusive  1)
while true // until a value is returned
ret = RNDINTRANGE(minInclusive, maxExclusive)
if ret < maxExclusive: return ret
end
END METHOD
Uniform Random Bits
The idiom RNDINT((1 << b)  1)
is a naïve way of generating a uniform random b
bit integer (with maximum 2^{b}  1).
In practice, memory is usually divided into bytes, or 8bit integers in the interval [0, 255]. In this case, a block of memory can be filled with random bits—
 by setting each byte in the block to
RNDINT(255)
, or  via a PRNG (or another device or program that simulates a "source of random numbers"), if it outputs one or more 8bit chunks at a time.
Examples of Using the RNDINT Family
 To choose either −1 or 1 with equal probability (the Rademacher distribution), one of the following idioms can be used:
(RNDINT(1) * 2  1)
or (RNDINTEXC(2) * 2  1)
.  To generate a random integer that's divisible by a positive integer (
DIV
), generate the integer with any method (such as RNDINT
), let X
be that integer, then generate X  rem(X, DIV)
if X >= 0
, or X  (DIV  rem(abs(X), DIV))
otherwise. (Depending on the method, the resulting integer may be out of range, in which case this procedure is to be repeated.)  A random 2dimensional point on an N×M grid can be expressed as a single integer as follows:
 To generate a random N×M point
P
, generate P = RNDINT(N * M  1)
(P
is thus in the interval [0, N * M
)).  To convert a point
P
to its 2D coordinates, generate [rem(P, N), floor(P / N)]
. (Each coordinate starts at 0.)  To convert 2D coordinates
coord
to an N×M point, generate P = coord[1] * N + coord[0]
.
 To simulate rolling an Nsided die (N greater than 1):
RNDINTRANGE(1, N)
, which chooses a number in the interval [1, N] with equal probability.  To generate a random integer with one base10 digit:
RNDINTRANGE(0, 9)
.  To generate a random integer with N base10 digits (where N is 2 or greater), where the first digit can't be 0:
RNDINTRANGE(pow(10, N1), pow(10, N)  1)
.  To choose a number in the interval [
mn
, mx
), with equal probability, in increments equal to step
: mn+step*RNDINTEXC(ceil((mxmn)/(1.0*step)))
.  To choose an integer in the interval [0,
X
) at random:
 And favor numbers in the middle:
floor((RNDINTEXC(X) + RNDINTEXC(X)) / 2)
.  And favor high numbers:
max(RNDINTEXC(X), RNDINTEXC(X))
.  And favor low numbers:
min(RNDINTEXC(X), RNDINTEXC(X))
.  And strongly favor high numbers:
max(RNDINTEXC(X), RNDINTEXC(X), RNDINTEXC(X))
.  And strongly favor low numbers:
min(RNDINTEXC(X), RNDINTEXC(X), RNDINTEXC(X))
.
Randomization Techniques
This section describes commonly used randomization techniques, such as shuffling, selection of several unique items, and creating random strings of text.
Boolean (True/False) Conditions
To generate a condition that is true at the specified probabilities, use the following idioms in an if
condition:
 True or false with equal probability:
RNDINT(1) == 0
.  True with X percent probability:
RNDINTEXC(100) < X
.  True with probability X/Y (a Bernoulli trial):
RNDINTEXC(Y) < X
.  True with odds of X to Y:
RNDINTEXC(X + Y) < X
.
The following helper method generates 1 with probability x
/y
and 0 otherwise:
METHOD ZeroOrOne(x,y)
if RNDINTEXC(y)<x: return 1
return 0
END METHOD
The method can also be implemented in the following way (as pointed out by Lumbroso (2013, Appendix B)[^6]):
// NOTE: Modified from Lumbroso
// Appendix B to add 'z==0' and error checks
METHOD ZeroOrOne(x,y)
if y <= 0: return error
if x==y: return 1
z = x
while true // until a value is returned
z = z * 2
if z >= y
if RNDINT(1) == 0: return 1
z = z  y
else if z == 0 or RNDINT(1) == 0: return 0
end
END METHOD
Note: Probabilities can be rational or irrational numbers. Rational probabilities are of the form n
/d
and can be simulated with ZeroOrOne
above. Irrational probabilities (such as exp(x/y)
or ln(2)
) have an infinite digit expansion (0.ddddd....
), and they require special algorithms to simulate; see "Algorithms for Irrational Constants" in my page on Bernoulli Factory algorithms.
Examples:
 True with probability 3/8:
RNDINTEXC(8) < 3
.  True with odds of 100 to 1:
RNDINTEXC(101) < 1
.  True with 20% probability:
RNDINTEXC(100) < 20
.  To generate a random integer in [0,
y
), or 1 instead if that number would be less than x
, using fewer random bits than the naïve approach: if ZeroOrOne(x, y) == 1: return 1; else: return RNDINTEXCRANGE(x, y)
.
Random Sampling
This section contains ways to choose one or more items from among a collection of them, where each item in the collection has the same chance to be chosen as any other. This is called random sampling and can be done with replacement or without replacement.
Sampling With Replacement: Choosing a Random Item from a List
Sampling with replacement essentially means taking a random item and putting it back. To choose a random item from a list—
 whose size is known in advance, use the idiom
list[RNDINTEXC(size(list))]
; or  whose size is not known in advance, generate
RandomKItemsFromFile(file, 1)
, in pseudocode given later (the result will be a 1item list or be an empty list if there are no items).
Sampling Without Replacement: Choosing Several Unique Items
Sampling without replacement essentially means taking a random item without putting it back. There are several approaches for doing a uniform random choice of k
unique items or values from among n
available items or values, depending on such things as whether n
is known and how big n
and k
are.
 If
n
is not known in advance: Use the reservoir sampling method; see the RandomKItemsFromFile
method, in pseudocode given later.  If
n
is relatively small (for example, if there are 200 available items, or there is a range of numbers from 0 through 200 to choose from):
 If items have to be chosen from a list in relative (index) order, or if
n
is 1, then use RandomKItemsInOrder
(given later).  Otherwise, if the order of the sampled items is unimportant, and each item can be derived from its index (the item's position as an integer starting at 0) without looking it up in a list: Use the
RandomKItemsFromFile
method.[^13]  Otherwise, if
k
is much smaller than n
, proceed as in item 3 instead.  Otherwise, any of the following will choose
k
items in random order:
 Store all the items in a list, shuffle that list, then choose the first
k
items from that list.  If the items are already stored in a list and the list's order can be changed, then shuffle that list and choose the first
k
items from the shuffled list.  If the items are already stored in a list and the list's order can't be changed, then store the indices to those items in another list, shuffle the latter list, then choose the first
k
indices (or the items corresponding to those indices) from the latter list.
 If
k
is much smaller than n
and the order of the items must be random or is unimportant:
 If the items are stored in a list whose order can be changed: Do a partial shuffle of that list, then choose the last
k
items from that list. A partial shuffle proceeds as given in the section "Shuffling", except the partial shuffle stops after k
swaps have been made (where swapping one item with itself counts as a swap).  Otherwise: Create another empty list
newlist
, and create a key/value data structure such as a hash table. Then, for each integer i
in the interval [0, k−1], do j = RNDINTEXC(ni); AddItem(newlist, HGET(j,j)); HSET(j,HGET(ni1,ni1))
, where HSET(k,v)
sets the item with key k
in the hash table to v
, and HGET(k,v)
gets the item with key k
in that table, or returns v
if there is no such item (Ting 2021)[^14]. The new list stores the indices to the chosen items, in random order.
 If
n  k
is much smaller than n
, the items are stored in a list, and the order of the sampled items is unimportant:
 If the list's order can be changed: Do a partial shuffle of that list, except that
nk
rather than k
swaps are done, then choose the first k
items from that list. (Note 5 in "Shuffling" can't be used.)  Otherwise, if
n
is not very large (for example, less than 5000): Store the indices to those items in another list, do a partial shuffle of the latter list, except that nk
rather than k
swaps are done, then choose the first k
indices (or the items corresponding to those indices) from the latter list. (Note 5 in "Shuffling" can't be used.)  Otherwise: Proceed as in item 5 instead.

Otherwise (for example, if 32bit or larger integers will be chosen so that n
is 2^{32}, or if n
is otherwise very large):
 If the items have to be chosen in relative (index) order: Let
n2 = floor(n/2)
. Generate h = PolyaEggenberger(k, n2, n, 1)
. Sample h
integers in relative order from the list [0, 1, ..., n2  1]
by doing a recursive run of this algorithm (items 1 to 5), then sample k  h
integers in relative order from the list [n2, n2 + 1, ..., n  1]
by running this algorithm recursively. The integers chosen this way are the indices to the desired items in relative (index) order (Sanders et al. 2019)[^15]. 
Otherwise, create a data structure to store the indices to items already chosen. When a new index to an item is randomly chosen, add it to the data structure if it's not already there, or if it is, choose a new random index. Repeat this process until k
indices were added to the data structure this way. Examples of suitable data structures are—
 a hash table,
 a compressed bit set (e.g, "roaring bitmap", EWAH), and
 a selfsorting data structure such as a red–black tree, if the random items are to be retrieved in sorted order or in index order.
Many applications require generating "unique random" values to identify database records or other shared resources, among other reasons. For ways to generate such values, see my recommendation document.
Shuffling
The Fisher–Yates shuffle method shuffles a list (puts its items in a random order) such that all permutations (arrangements) of that list occur with the same probability. However, that method is also easy to write incorrectly — see also (Atwood 2007)[^16]. The following pseudocode is designed to shuffle a list's contents.
METHOD Shuffle(list)
// NOTE: Check size of the list early to prevent
// `i` from being less than 0 if the list's size is 0 and
// `i` is implemented using a nonnegative integer
// type available in certain programming languages.
if size(list) >= 2
// Set i to the last item's index
i = size(list)  1
while i > 0
// Choose an item ranging from the first item
// up to the item given in `i`. Observe that the item
// at i+1 is excluded.
j = RNDINTEXC(i + 1)
// Swap item at index i with item at index j;
// in this case, i and j may be the same
tmp = list[i]
list[i] = list[k]
list[k] = tmp
// Move i so it points to the previous item
i = i  1
end
end
// NOTE: An implementation can return the
// shuffled list, as is done here, but this is not required.
return list
END METHOD
Notes:
j = RNDINTEXC(i + 1)
can't be replaced with j = RNDINTEXC(size(list))
since it introduces biases. If that line is replaced with j = RNDINTEXC(i)
, the result is Sattolo's algorithm (which chooses from among permutations with cycles), rather than a Fisher–Yates shuffle.  When it comes to shuffling, the choice of pseudorandom number generator (or whatever is simulating a "source of random numbers") is important; see my recommendation document on shuffling.
 A shuffling algorithm that can be carried out in parallel is described in (Bacher et al., 2015)[^17].
 A derangement is a permutation where every item moves to a different position. A random derangement can be generated as follows (Merlini et al. 2007)[^18]: (1) modify
Shuffle
by adding the following line after j = RNDINTEXC(i + 1)
: if i == list[j]: return nothing
, and changing while i > 0
to while i >= 0
; (2) use the following pseudocode with the modified Shuffle
method: while True; list = []; for i in 0...n: AddItem(list, i); s=Shuffle(list); if s!=nothing: return s; end
.  Ting (2021)[^14] showed how to reduce the space complexity of shuffling via a hash table: Modify
Shuffle
as follows: (1) Create a hash table at the start of the method; (2) instead of the swap tmp = list[i]; list[i] = list[j]; list[j] = tmp
, use the following: list[i] = HGET(j,j); HSET(k,HGET(i,i)); if k==i: HDEL(i)
, where HSET(k,v)
sets the item with key k
in the hash table to v
; HGET(k,v)
gets the item with key k
in that table, or returns v
if there is no such item; and HDEL(k)
deletes the item with key k
from that table. (The hash table can instead be any key/value map structure, including a red–black tree. This can be combined with note 4 to generate derangements, except replace list[j]
in note 4 with HGET(j,j)
.)
Random Character Strings
To generate a random string of characters:
 Prepare a list of the letters, digits, and/or other characters the string can have. Examples are given later in this section.
 Build a new string whose characters are chosen at random from that character list. The method, shown in the pseudocode below, demonstrates this. The method samples characters at random with replacement, and returns a list of the sampled characters. (How to convert this list to a text string depends on the programming language and is outside the scope of this page.) The method takes two parameters:
characterList
is the list from step 1, and stringSize
is the number of random characters.
METHOD RandomString(characterList, stringSize)
i = 0
newString = NewList()
while i < stringSize
// Choose a character from the list
randomChar = characterList[RNDINTEXC(size(characterList))]
// Add the character to the string
AddItem(newString, randomChar)
i = i + 1
end
return newString
END METHOD
The following are examples of character lists:
 For an alphanumeric string, or string of letters and digits, the characters can be the basic digits "0" to "9" (U+0030U+0039, nos. 4857), the basic upper case letters "A" to "Z" (U+0041U+005A, nos. 6590), and the basic lower case letters "a" to "z" (U+0061U+007A, nos. 96122), as given in the Unicode Standard.
 For a base10 digit string, the characters can be the basic digits only.
 For a base16 digit (hexadecimal) string, the characters can be the basic digits as well as the basic letters "A" to "F" or "a" to "f" (not both).
Notes:
 If the list of characters is fixed, the list can be created in advance at runtime or compile time, or (if every character takes up the same number of code units) a string type as provided in the programming language can be used to store the list as a string.
 Unique random strings: Generating character strings that are not only random, but also unique, can be done by storing a list (such as a hash table) of strings already generated and checking newly generated strings against that list. However, if the unique values will identify something, such as database records or user accounts, an application may care about the choice of PRNG (or other device or program that simulates a "source of random numbers"), so that using random unique values might not be best; see my recommendation document.
 Word generation: This technique could also be used to generate "pronounceable" words, but this is less flexible than other approaches; see also "Markov Chains".
Pseudocode for Random Sampling
The following pseudocode implements two methods:
RandomKItemsFromFile
implements reservoir sampling; it chooses up to k
random items from a file of indefinite size (file
). Although the pseudocode refers to files and lines, the technique works whenever items are retrieved one at a time from a data set or list whose size is not known in advance. In the pseudocode, ITEM_OUTPUT(item, thisIndex)
is a placeholder for code that returns the item to store in the list; this can include the item's value, its index starting at 0, or both. RandomKItemsInOrder
returns a list of up to k
random items from the given list (list
), in the order in which they appeared in the list. It is based on a technique presented in (Devroye 1986)[^19], p. 620.
METHOD RandomKItemsFromFile(file, k)
list = NewList()
j = 0
index = 0
while true // until a value is returned
// Get the next line from the file
item = GetNextLine(file)
thisIndex = index
index = index + 1
// If the end of the file was reached, break
if item == nothing: break
// NOTE: The following line is OPTIONAL
// and can be used to choose only random lines
// in the file that meet certain criteria,
// expressed as MEETS_CRITERIA below.
// 
// if not MEETS_CRITERIA(item): continue
// 
if j < k // phase 1 (fewer than k items)
AddItem(list, ITEM_OUTPUT(item, thisIndex))
j = j + 1
else // phase 2
j = RNDINT(thisIndex)
if j < k: list[j] = ITEM_OUTPUT(item, thisIndex)
end
end
// NOTE: Shuffle at the end in case k or
// fewer lines were in the file, since in that
// case the items would appear in the same
// order as they appeared in the file
// if the list weren't shuffled. This line
// can be removed, however, if the order of
// the items in the list is unimportant.
if size(list)>=2: Shuffle(list)
return list
end
METHOD RandomKItemsInOrder(list, k)
n = size(list)
// Special case if k is 1
if k==1: return [list[RNDINTEXC(n)]]
i = 0
kk = k
ret = NewList()
while i < n and size(ret) < k
u = RNDINTEXC(n  i)
if u <= kk
AddItem(ret, list[i])
kk = kk  1
end
i = i + 1
end
return ret
END METHOD
Examples:
 Removing
k
random items from a list of n
items (list
) is equivalent to generating a new list by RandomKItemsInOrder(list, n  k)
.  Filtering: If an application needs to sample the same list (with or without replacement) repeatedly, but only from among a selection of that list's items, it can create a list of items it wants to sample from (or a list of indices to those items), and sample from the new list instead.[^20] This won't work well, though, for lists of indefinite or very large size.
Rejection Sampling
Rejection sampling is a simple and flexible approach for generating random content that meets certain requirements. To implement rejection sampling:
 Generate the random content (such as a number or text string) by any method and with any distribution and range.
 If the content doesn't meet predetermined criteria, go to step 1.
Example criteria include checking—
 whether a number generated this way—
 is not less than a minimum threshold (lefttruncation),
 is not greater than a maximum threshold (righttruncation),
 is prime,
 is divisible or not by certain numbers,
 is not among numbers chosen recently by the sampling method,
 was not already chosen (with the aid of a hash table, red–black tree, or similar structure),
 was not chosen more often in a row than desired, or
 is not included in a "blacklist" of numbers,
 whether a point generated this way is sufficiently distant from previous random points (with the aid of a KDtree or similar structure),
 whether a point generated this way lies in a simple or complex shape,
 whether a text string generated this way matches a regular expression, or
 two or more of the foregoing criteria.
(KDtrees, hash tables, red–black trees, primenumber testing algorithms, and regular expressions are outside the scope of this document.)
Notes:
 The running time for rejection sampling depends on the acceptance rate, that is, how often the sampler accepts a sampled outcome rather than rejecting it. In general, this rate is the number of acceptable outcomes divided by the total number of outcomes.
 All rejection sampling strategies have a chance to reject data, so they all have a variable running time (in fact, they could run indefinitely). But graphics processing units (GPUs) and other devices that run multiple tasks at once work better if all the tasks finish their work at the same time. This is not possible if they all implement a rejection sampling technique because of its variable running time. If each iteration of the rejection sampler has a low rejection rate, one solution is to have each task run one iteration of the sampler, with its own "source of random numbers" (such as numbers generated from its own PRNG), then to take the first sampled number that hasn't been rejected this way by a task (which can fail at a very low rate).[^21]
Random Walks
A random walk is a process with random behavior over time. A simple form of random walk involves choosing, at random, a number that changes the state of the walk. The pseudocode below generates a random walk with n steps, where STATEJUMP()
is the next number to add to the current state (see examples later in this section).
METHOD RandomWalk(n)
// Create a new list with an initial state
list=[0]
// Add 'n' new numbers to the list.
for i in 0...n: AddItem(list, list[i] + STATEJUMP())
return list
END METHOD
Notes:
 A white noise process is simulated by creating a list of independent random variates generated in the same way. Such a process generally models behavior over time that does not depend on the time or the current state. One example is
ZeroOrOne(px,py)
(for modeling a Bernoulli process, where each number is either 1 with probability px
/py
or 0 otherwise).  A useful reference here is De Bruyne et al. (2021)[^22].
Examples:
 If
STATEJUMP()
is RNDINT(1) * 2  1
, the random walk generates numbers that each differ from the last by 1 or 1, chosen at random.  If
STATEJUMP()
is ZeroOrOne(px,py) * 2  1
, the random walk generates numbers that each differ from the last by either 1 with probability px
/py
or −1 otherwise.  Binomial process: If
STATEJUMP()
is ZeroOrOne(px,py)
, the random walk advances the state with probability px
/py
.
Random Dates and Times
Pseudocode like the following can be used to choose a random dateandtime bounded by two datesandtimes (date1
, date2
): dtnum1 = DATETIME_TO_NUMBER(date1); dtnum2 = DATETIME_TO_NUMBER(date2); num = RNDINTRANGE(date1, date2); result = NUMBER_TO_DATETIME(num)
.
In that pseudocode, DATETIME_TO_NUMBER
and NUMBER_TO_DATETIME
convert a dateandtime to or from a number, respectively, at the required granularity, for instance, month, day, or hour granularity (the details of such conversion depend on the dateandtime format and are outside the scope of this document). Instead of RNDINTRANGE(date1, date2)
, any other random selection strategy can be used.
Randomization in Statistical Testing
Statistical testing uses shuffling and bootstrapping to help draw conclusions on data through randomization.
 Shuffling is used when each item in a data set belongs to one of several mutually exclusive groups. Here, one or more simulated data sets are generated by shuffling the original data set and regrouping each item in the shuffled data set in order, such that the number of items in each group for the simulated data set is the same as for the original data set.
 Bootstrapping is a method of creating one or more random samples (simulated data sets) of an existing data set, where the items in each sample are chosen at random with replacement. (Each random sample can contain duplicates this way.) See also (Brownlee 2018)[^23].
After creating the simulated data sets, one or more statistics, such as the mean, are calculated for each simulated data set as well as the original data set, then the statistics for the simulated data sets are compared with those of the original (such comparisons are outside the scope of this document).
Markov Chains
A Markov chain models one or more states (for example, individual letters or syllables), and stores the probabilities to transition from one state to another (for example, "b" to "e" with a chance of 20 percent, or "b" to "b" with a chance of 1 percent). Thus, each state can be seen as having its own list of weights for each relevant state transition (see "Weighted Choice With Replacement). For example, a Markov chain for generating "pronounceable" words, or words similar to naturallanguage words, can include "start" and "stop" states for the start and end of the word, respectively.
An algorithm called coupling from the past (Propp and Wilson 1996)[^24] can sample a state from a Markov chain's stationary distribution, that is, the chain's steady state, by starting multiple chains at different states and running them until they all reach the same state at the same time. However, stopping the algorithm early can introduce bias unless precautions are taken (Fill 1998)[^25]. The algorithm works correctly if the chain has a finite number of states and is not periodic, and each state is reachable from every other.
The following pseudocode implements coupling from the past. In the method, StateCount
is the number of states in the Markov chain, UPDATE(chain, state, random)
transitions the Markov chain to the next state given the current state and random variates, and RANDOM()
generates one or more random variates needed by UPDATE
.
METHOD CFTP(chain)
states=[]
numstates=StateCount(chain)
done=false
randoms=[]
while not done
// Start multiple chains at different states. NOTE:
// If the chain is monotonic (meaning the states
// are ordered and, whenever state A is less
// than state B, A's next state is never higher than
// B's next state), then just two chains can be
// created instead, starting
// at the first and last state, respectively.
for i in 0...numstates: AddItem(states, i)
// Update each chain with the same randomness
AddItem(randoms, RANDOM())
for k in 0...size(randoms):
for i in 0...numstates: states[i]=
UPDATE(chain, states[i], randoms[size(randoms)1k])
end
// Stop when all states are the same
fs=states[0]
done=true
for i in 1...numstates: done=(done and states[i]==fs)
end
return states[0] // Return the steady state
END METHOD
Note: A discrete phasetype distribution consists of a Markov chain, a start state, and an end state. It models the (random) number of steps, minus 1, needed for the Markov chain to move from the start state to the end state.
Random Graphs
A graph is a listing of points and the connections between them. The points are called vertices and the connections, edges.
A convenient way to represent a graph is an adjacency matrix. This is an n×n matrix with n rows and n columns (signifying n vertices in the graph). For simple graphs, an adjacency matrix contains only 1s and 0s — for the cell at row r and column c, a 1 means there is an edge pointing from vertex r to vertex c, and a 0 means there are none.
In this section, Zeros(n)
creates an n
×n
zero matrix (such as a list consisting of n
lists, each of which contains n
zeros).
The following method generates a random n
vertex graph that follows the model G(n, p) (also known as the Gilbert model (Gilbert 1959)[^26]), where each edge is drawn with probability px
/py
(Batagelj and Brandes 2005)[^27].
METHOD GNPGraph(n, px, py)
graph=Zeros(n)
for i in 2...n
j = i
while j > 0
j = j  1  min(NegativeBinomialInt(1, px, py), j  1)
if j > 0
// Build an edge
graph[i][j]=1
graph[j][i]=1
end
end
end
return graph
END METHOD
Other kinds of graphs are possible, including Erdős–Rényi graphs (choose m
random edges uniformly without replacement, given an n×n adjacency matrix), Chung–Lu graphs, preferential attachment graphs, and more. For example, a mesh graph is a graph in the form of a rectangular mesh, where vertices are the corners and edges are the sides of the mesh's rectangles. A random maze is a random spanning tree (Costantini 2020)[^28] of a mesh graph. Penschuck et al. (2020)[^29] give a survey of random graph generation techniques.
A Note on Sorting Random Variates
In general, sorting random variates is no different from sorting any other data. (Sorting algorithms are outside this document's scope.)[^30]
General NonUniform Distributions
Some applications need to choose random values such that some of them have a greater chance to be chosen than others (a nonuniform distribution). Most of the techniques in this section show how to use the uniform random integer methods to generate such random values.
Weighted Choice
The weighted choice method generates a random item or value from among a collection of them with separate probabilities of each item or value being chosen. There are several kinds of weighted choice.
Weighted Choice With Replacement
The first kind is called weighted choice with replacement (which can be thought of as drawing a ball, then putting it back) or a categorical distribution, where the probability of choosing each item doesn't change as items are chosen. In the following pseudocode:
WeightedChoice
takes a single list weights
of weights (integers 0 or greater) and returns the index of a weight from that list. The greater the weight, the greater the chance its index will be chosen. CumulativeWeightedChoice
takes a single list weights
of N cumulative weights; they start at 0 and the next weight is not less than the previous. Returns a number in the interval [0, N  1). NormalizeRatios
calculates a list of integers with the same proportions as the given list of rational numbers (numbers of the form x/y
). This is useful for converting rational weights to integer weights for use in WeightedChoice
. gcd(a, b)
is the greatest common divisor between two numbers (where gcd(0, a) = gcd(a, 0) = a
whenever a >= 0
).
METHOD WChoose(weights, value)
// Choose the index according to the given value
runningValue = 0
for i in 0...size(weights)  1
if weights[i] > 0
newValue = runningValue + weights[i]
// NOTE: Includes start, excludes end
if value < newValue: break
runningValue = newValue
end
end
// Should not happen with integer weights
return error
END METHOD
METHOD WeightedChoice(weights)
return WChoose(weights,
RNDINTEXC(Sum(weights)))
END METHOD
METHOD CumulativeWeightedChoice(weights)
if size(weights)==0 or weights[0]!=0: return error
value = RNDINTEXC(weights[size(weights)  1])
// Choose the index according to the given value
for i in 0...size(weights)  1
// Choose only if difference is positive
if weights[i] < weights[i+1] and
weights[i]>=value: return i
end
return 0
END METHOD
METHOD NormalizeRatios(ratios)
prod=1; gc=0
for r in ratios: prod*=r[1] // Multiply denominators
weights=[]
for r in ratios
rn = floor(r * prod)
gc = gcd(rn, gc); AddItem(weights, rn)
end
if gc==0: return weights
for i in 0...size(weights): weights[i]=floor(weights[i]/gc)
return weights
END METHOD
The following are various ways to implement WeightedChoice
. Many of them require using a special data structure.
Algorithm  Notes 
Linear search  See the pseudocode for WeightedChoice above. 
Linear search with cumulative weights  Calculates a list of cumulative weights (also known as a cumulative distribution table or CDT), then generates, at random, a number less than the sum of (original) weights (which should be an integer if the weights are integers), then does a linear scan of the new list to find the first item whose cumulative weight exceeds the generated number. 
Fast Loaded Dice Roller (Saad et al., 2020a)[^31].  Uses integer weights only, and samples using random bits ("fair coins"). This sampler comes within 6 bits, on average, of the optimal number of random bits per sample. 
Samplers described in (Saad et al., 2020b)[^32]  Uses integer weights only, and samples using random bits. The samplers come within 2 bits, on average, of the optimal number of random bits per sample as long as the sum of the weights is of the form 2^{k} or 2^{k} − 2^{m}. 
Rejection sampling  Given a list (weights ) of n weights: (1) find the highest weight and call it max; (2) set i to RNDINT(n  1) ; (3) With probability weights[i]/max (for example, if ZeroOrOne(weights[i], max)==1 for integer weights), return i, and go to step 2 otherwise. (See, for example, sec. 4 of the Fast Loaded Dice Roller paper, or the Tang or Klundert papers. weights[i] can also be a function that calculates the weight for i "on the fly"; in that case, max is the maximum value of weights[i] for every i .)
If the weights are instead logweights (that is, each weight is ln(x)/ln(b) where x is the original weight and b is the logarithm base), step 3 changes to: "(3) If Expo(ln(b)) > max  weights[i] (which happens with probability pow(b, (max  weights[i])) ), return i, and go to step 2 otherwise."
If the weights are instead "coins", each with a separate but unknown probability of heads, the algorithm is also called Bernoulli race (Dughmi et al. 2017)[^33]: (1) set i to RNDINT(n  1) ; (2) flip coin i (the first coin is 0, the second is 1, and so on), then return i if it returns 1 or heads, or go to step 1 otherwise. 
Bringmann and Panagiotou (2012/2017)[^34].  Shows a sampler designed to work on a sorted list of weights. 
Alias method (Walker 1977)[^35]  Michael Vose's version of the alias method (Vose 1991)[^36] is described in "Darts, Dice, and Coins: Sampling from a Discrete Distribution". Weights should be rational numbers. 
(Klundert 2019)[^37]  Various data structures, with emphasis on how they can support changes in weights. 
The Bringmann–Larsen succinct data structure (Bringmann and Larsen 2013)[^38]  Uses rejection sampling if the sum of weights is large, and a compressed structure otherwise. 
HübschleSchneider and Sanders (2019)[^39].  Parallel weighted random samplers. 
(Tang 2019)[^40].  Presents various algorithms, including two and multilevel search, binary search (with cumulative weights), and a new "flat" method. 
"Loaded Die from Biased Coins"  Given a list of probabilities probs that must sum to 1 and should be rational numbers: (1) Set cumu to 1 and i to 0; (2) with probability probs[i]/cumu , return i ; (3) subtract probs[i] from cumu , then add 1 to i , then go to step 2. For a correctness proof, see "Darts, Dice, and Coins". If each probability in probs is calculated "on the fly", this is also called sequential search; see chapter 10 of Devroye (1986)[^19] (but this generally won't be exact unless all the probabilities involved are rational numbers). 
Knuth and Yao (1976)[^9]  Generates a binary DDG tree from the binary expansions of the probabilities (that is, they have the base2 form 0.bbbbbb... where b is 0 or 1). Comes within 2 bits, on average, of the optimal number of random bits per sample. This is suggested in exercise 3.4.2 of chapter 15 of Devroye (1986)[^19], implemented in randomgen.py as the discretegen method, and also described in (Devroye and Gravel 2020)[^11]. discretegen can work with probabilities that are irrational numbers (which have infinite binary expansions) as long as there is a way to calculate the binary expansion "on the fly". 
Han and Hoshi (1997)[^41]  Uses cumulative probabilities as input and comes within 3 bits, on average, of the optimal number of random bits per sample. Also described in (Devroye and Gravel 2020)[^11]. 
Notes:
 Weighted choice algorithms as binary tree walkers. Just like
RNDINT
algorithms (see the RNDINT
section), weighted choice algorithms can all be described as random walks on a binary DDG tree. In this case, though, the probabilities are not necessarily uniform, and on average, the algorithm needs at least as many unbiased random bits as the sum of binary entropies of all the probabilities involved. For example, say we give the four integers 1, 2, 3, 4 the following weights: 3, 15, 1, 2. The binary entropies of these weights add up to 0.4010... + 0.3467... + 0.2091... + 0.3230... = 1.2800... (because the sum of the weights is 21 and the binary entropy of 3/21 is 0  (3/21) * log2(3/21) = 0.4010...
, where log2(x) = ln(x)/ln(2)
, and so on for the other weights). Thus, any weighted sampler will require at least 1.2800... bits on average to generate a number with probability proportional to these weights.[^10] The note "Reducing 'bit waste'" from the RNDINT
section also applies here.  For best results, weights passed to the algorithms in the table above should first be converted to integers (for example, using
NormalizeRatios
in the pseudocode above), or rational numbers when indicated. (Obviously, if the weights were originally irrational numbers, this conversion will be lossy and the algorithm won't be exact, unless noted otherwise in the table.) Also, using floatingpoint numbers in the algorithms can introduce unnecessary rounding errors, so such numbers should be avoided.  The Python sample code contains a variant of the
WeightedChoice
pseudocode for generating multiple random points in one call.
Examples:
 Assume we have the following list:
["apples", "oranges", "bananas", "grapes"]
, and weights
is the following: [3, 15, 1, 2]
. The weight for "apples
" is 3
, and the weight for "oranges
" is 15
. Since "oranges
" has a higher weight than "apples
", the index for "oranges
" (1) has a greater probability of being chosen than the index for "apples
" (0) with the WeightedChoice
method. The following idiom implements how to get a randomly chosen item from the list with that method: item = list[WeightedChoice(weights)]
.  Example 1 can be implemented with
CumulativeWeightedChoice
instead of WeightedChoice
if weights
is the following list of cumulative weights: [0, 3, 18, 19, 21]
.  Piecewise constant distribution. Assume the weights from example 1 are used and the list contains the following:
[0, 5, 10, 11, 13]
(one more item than the weights). This expresses four intervals: [0, 5), [5, 10), and so on. Choose a random index (and thus interval) with index = WeightedChoice(weights)
. Then independently, choose a number in the chosen interval uniformly at random (for example, code like the following chooses a random integer this way: number = RNDINTEXCRANGE(list[index], list[index + 1])
).
Weighted Choice Without Replacement
Weighted choice without replacement can be thought of as drawing a ball without putting it back.
The following are ways to implement weighted choice without replacement, where each item can be chosen no more than once at random. The weights have the property that higherweighted items have a greater chance to appear first.
 Use
WeightedChoice
to choose random indices. Each time an index is chosen, set the weight for the chosen index to 0 to keep it from being chosen again. Or...  Assign each index a random exponential random variate (with a rate equal to that index's weight, which must be an integer 1 or greater). Make a list of pairs assigning each number to an index, then sort that list in ascending order (from low to high) by those numbers. Example:
v=[]; for i in 0...size(weights): AddItem(v, [ExpoNew(weights[i]), i]); Sort(v)
(see note 2 below). The sorted list of indices will then correspond to a weighted choice without replacement. See "Algorithms for sampling without replacement" and see also (Efraimidis 2015)[^42]. (Efraimidis and Spirakis 2005)[^43] describes how to implement this approach without having to store every item using reservoir sampling (essentially a priority queue of the k
items with the lowest random variates associated with them).
Notes:

Some applications (particularly some games) wish to control which random outcomes appear, to make those outcomes appear "fairer" to users (for example, to avoid long streaks of good outcomes or of bad outcomes). Weighted choice without replacement of a list of outcomes can be used for this purpose as long as the list is replenished once all the outcomes are chosen. However, this kind of sampling should be avoided in applications that care about information security, including when a player or user would have a significant and unfair advantage if the outcomes were easy to guess.

ExpoNew(weight)
creates an "empty" exponential random variate with rate weight
, whose bits are not yet determined (see "PartiallySampled Random Numbers"). Sorting the variates relies on comparing two variates via ExpoLess(a, b)
, which returns whether one exponential number (a
) is less than another (b
), building up the bits of both as necessary. For a less exact algorithm, replace ExpoNew(weight)
with ExpoApprox(weight)
and ExpoLess(a, b)
with a < b
, where ExpoApprox
has the following pseudocode that uses von Neumann's (1951)[^44] algorithm: METHOD ExpoApprox(w); b=1000000; count=0; while true; y1=RNDINTEXC(b); y=y1; accept=true; while true; z=RNDINTEXC(b); if y<=z: break; if accept: accept=false; else: accept=true; y=z; end; if accept: count=count+y1; else: count=count+b; if accept: return MakeRatio(count, b*w); end; END METHOD
.
Unequal Probability Sampling
For the methods given in the previous section, the weights have the property that higherweighted items are chosen first, but each item's weight is not necessarily the chance that a given sample of n
items will include that item (an inclusion probability). The following method chooses a random sample of n
indices from a list of items (whose weights are integers stored in a list called weights
), such that the chance that index k
is in the sample is given as weights[k]*n/Sum(weights)
. The chosen indices will not necessarily be in random order. The method implements the "splitting method" (Deville and Tillé 1998)[^45].
METHOD InclusionSelect(weights, n)
if n>size(weights): return error
if n==0: return []
ws=Sum(weights)
wts=[]
items=[]
// Calculate inclusion probabilities
for i in 0...size(weights):
AddItem(wts,[MakeRatio(weights[i],ws)*n, i])
Sort(wts)
// Check for invalid inclusion probabilities
if wts[size(wts)1][0]>1: return error
last=size(wts)n
if n==size(wts)
for i in 0...n: AddItem(items,i)
return items
end
while true // until a value is returned
lamda=min(MakeRatio(1,1)wts[last1][0],wts[last][0])
if lamda==0: return error
if ZeroOrOne(lamda[0],lamda[1])
for k in 0...size(wts)
if k+1>ntotaln:AddItem(items,wts[k][1])
end
return items
end
newwts=[]
for k in 0...size(wts)
newwt=(k+1<=last) ?
wts[k][0]/(1lamda) : (wts[k][0]lamda)/(1lamda)
AddItem(newwts,[newwt,wts[k][1]])
end
wts=newwts
Sort(wts)
end
END METHOD
For the case when the list of items has an unknown size and its weight can be calculated "on the fly", see (Chao 1982)[^46].
Mixtures of Distributions
A mixture consists of two or more probability distributions with separate probabilities of being sampled. To generate random content from a mixture—
 generate
index = WeightedChoice(weights)
, where weights
is a list of relative probabilities that each distribution in the mixture will be sampled, then  based on the value of
index
, generate the random content from the corresponding distribution.
Examples:
 One mixture consists of the sum of three sixsided virtual die rolls and the result of one sixsided die roll, but there is an 80% chance to roll one sixsided virtual die rather than three. The following pseudocode shows how this mixture can be sampled:
index = WeightedChoice([80, 20]); number = 0; if index==0: number = RNDINTRANGE(1,6); else: number = RNDINTRANGE(1,6) + RNDINTRANGE(1,6) + RNDINTRANGE(1,6)
.  Choosing an independent uniform random point, from a complex shape (in any number of dimensions) is equivalent to doing such sampling from a mixture of simpler shapes that make up the complex shape (here, the
weights
list holds the ndimensional "volume" of each simpler shape). For example, a simple closed 2D polygon can be triangulated, or decomposed into triangles, and a mixture of those triangles can be sampled.[^47] 
Take a set of nonoverlapping integer ranges (for example, [0, 5], [7, 8], [20, 25]). To choose an independent uniform random integer from those ranges:
 Create a list (
weights
) of weights for each range. Each range is given a weight of (mx  mn) + 1
, where mn
is that range's minimum and mx
is its maximum.  Choose an index using
WeightedChoice(weights)
, then generate RNDINTRANGE(mn, mx)
, where mn
is the corresponding range's minimum and mx
is its maximum.
This method can be adapted for rational numbers with a common denominator by treating the integers involved as the numerators for such numbers. For example, [0/100, 5/100], [7/100, 8/100], [20/100, 25/100], where the numerators are the same as in the previous example.
 In the pseudocode
index = WeightedChoice([80, 20]); list = [[0, 5], [5, 10]]; number = RNDINTEXCRANGE(list[index][0], list[index][1])
, a random integer in [0, 5) is chosen at an 80% chance, and a random integer in [5, 10) at a 20% chance.  A hyperexponential distribution is a mixture of exponential distributions, each one with a separate weight and separate rate parameter.
Transformations of Random Variates
Random variates can be generated by combining and/or transforming one or more random variates and/or discarding some of them.
As an example, "Probability and Games: Damage Rolls" by Red Blob Games includes interactive graphics showing score distributions for lowestof, highestof, dropthelowest, and reroll game mechanics.[^48] These and similar distributions can be generalized as follows.
Generate one or more random variates (numbers), each with a separate probability distribution, then:
 Highestof: Choose the highest generated variate.
 Dropthelowest: Add all generated variates except the lowest.
 Rerollthelowest: Add all generated variates except the lowest, then add a number generated randomly by a separate probability distribution.
 Lowestof: Choose the lowest generated number.
 Dropthehighest: Add all generated variates except the highest.
 Rerollthehighest: Add all generated variates except the highest, then add a number generated randomly by a separate probability distribution.
 Sum: Add all generated variates.
 Mean: Add all generated variates, then divide the sum by the number of variates.
 Geometric transformation: Treat the variates as an ndimensional point, then apply a geometric transformation, such as a rotation or other affine transformation[^49], to that point.
If the probability distributions are the same, then strategies 1 to 3 give higher numbers a greater probability, and strategies 4 to 6, lower numbers.
Note: Variants of strategy 4 — for example, choosing the second, third, or nthlowest number — are formally called second, third, or nthorder statistics distributions, respectively.
Examples:
 The idiom
min(RNDINTRANGE(1, 6), RNDINTRANGE(1, 6))
takes the lowest of two sixsided die results (strategy 4). Due to this approach, 1 has a greater chance of occurring than 6.  The idiom
RNDINTRANGE(1, 6) + RNDINTRANGE(1, 6)
takes the result of two sixsided dice (see also "Dice") (strategy 7).  A binomial distribution models the sum of
n
numbers each generated by ZeroOrOne(px,py)
(strategy 7) (see "Binomial Distribution").  A Poisson binomial distribution models the sum of
n
numbers each with a separate probability of being 1 as opposed to 0 (strategy 7). Given probs
, a list of the n
probabilities as rational numbers, the pseudocode is: for i in 0...n: x=x+ZeroOrOne(probs[i][0],probs[i][1]); return x
. 
Clamped random variates. These are one example of transformed random variates. To generate a clamped random variate, generate a number at random as usual, then—
 if that number is less than a minimum threshold, use the minimum threshold instead (leftcensoring), and/or
 if that number is greater than a maximum threshold, use the maximum threshold instead (rightcensoring).
An example of a clamped random variate is min(200, RNDINT(255))
.
 A compound Poisson distribution models the sum of n numbers each chosen at random in the same way, where n follows a Poisson distribution (for example,
n = PoissonInt(10, 1)
for an average of 10 numbers) (strategy 7, sum).  A Pólya–Aeppli distribution is a compound Poisson distribution in which the numbers are generated by
NegativeBinomial(1, 1p)+1
for a fixed p
.
Specific NonUniform Distributions
This section contains information on some of the most common nonuniform probability distributions.
Dice
The following method generates a random result of rolling virtual dice. It takes three parameters: the number of dice (dice
), the number of sides in each die (sides
), and a number to add to the result (bonus
) (which can be negative, but the result of the method is 0 if that result is greater). See also Red Blob Games, "Probability and Games: Damage Rolls".
METHOD DiceRoll(dice, sides, bonus)
if dice < 0 or sides < 1: return error
ret = 0
for i in 0...dice: ret=ret+RNDINTRANGE(1, sides)
return max(0, ret + bonus)
END METHOD
Examples: The result of rolling—
 four sixsided virtual dice ("4d6") is
DiceRoll(4,6,0)
,  three tensided virtual dice, with 4 added ("3d10 + 4"), is
DiceRoll(3,10,4)
, and  two sixsided virtual dice, with 2 subtracted ("2d6  2"), is
DiceRoll(2,6,2)
.
Binomial Distribution
The binomial distribution uses two parameters: trials
and p
. This distribution models the number of successes in a fixed number of independent trials (equal to trials
), each with the same probability of success (equal to p
, where p <= 0
means never, p >= 1
means always, and p = 1/2
means an equal chance of success or failure). In this document, Binomial(trials, p)
is a binomial random variate with the given parameters.
This distribution has a simple implementation: count = 0; for i in 0...trials: count=count+ZeroOrOne(px, py)
. But for large numbers of trials, this can be very slow.
The pseudocode below implements an exact sampler of this distribution, with certain optimizations based on (FarachColton and Tsai 2015)[^50]. (Another exact sampler is given in (Bringmann et al. 2014)[^51] and described in my "Miscellaneous Observations on Randomization".) Here, the parameter p
is expressed as a ratio px
/py
.
METHOD BinomialInt(trials, px, py)
if trials < 0: return error
if trials == 0: return 0
// Always succeeds
if mx: return trials
// Always fails
if p <= 0.0: return 0
count = 0
ret = 0
recursed = false
if py*2 == px // Is half
if i > 200
// Divide and conquer
half = floor(trials / 2)
return BinomialInt(half, 1, 2) + BinomialInt(trials  half, 1, 2)
else
if rem(trials,2)==1
count=count+RNDINT(1)
trials=trials1
end
// NOTE: This step can be made faster
// by precalculating an alias table
// based on a list of n + 1 binomial(1/2)
// weights, which consist of nchoosei
// for every i in [0, n], and sampling based on
// that table (see FarachColton and Tsai).
for i in 0...trials: count=count+RNDINT(1)
end
else
// Based on proof of Theorem 2 in FarachColton and Tsai.
// Decompose px/py into its base2 digits.
pw = MakeRatio(px, py)
pt = MakeRatio(1, 2)
while trials>0 and pw>0
c=BinomialInt(trials, 1, 2)
if pw>=pt
count=count+c
trials=trialsc
pw=pwpt
else
trials=c
end
pt=pt/2 // NOTE: Not rounded
end
end
if recursed: return count+ret
return count
END METHOD
Note: If px
/py
is 1
/2
, the binomial distribution models the task "Flip N coins, then count the number of heads", and the random sum is known as Hamming distance (treating each trial as a "bit" that's set to 1 for a success and 0 for a failure). If px
is 1
, then this distribution models the task "Roll n
py
sided dice, then count the number of dice that show the number 1."
Negative Binomial Distribution
In this document, the negative binomial distribution models the number of failing trials that happen before a fixed number of successful trials (successes
). Each trial is independent and has a success probability of px/py
(where 0 means never and 1 means always). The following is a naïve implementation; see also the notes for the geometric distribution, a special case of this one.
METHOD NegativeBinomialInt(successes, px, py)
// Needs to be 0 or greater; px must not be 0
if successes < 0 or px == 0: return error
if successes == 0 or px >= py: return 0
total = 0
count = 0
while total < successes
if ZeroOrOne(px, py) == 1: total = total + 1
else: count = count + 1
end
return count
END METHOD
If successes
is a noninteger, the distribution is often called a Pólya distribution. In that case, it can be sampled using the following pseudocode (Heaukulani and Roy 2019)[^52]:
METHOD PolyaInt(sx, sy, px, py)
isinteger=rem(sx,sy)==0
sxceil=ceil(sx/sy)
while true // until a value is returned
w=NegativeBinomialInt(sxceil, px, py)
if isinteger or w==0: return w
tmp=MakeRatio(sx,sy)
anum=tmp
for i in 1...w: anum=anum*(tmp+i)
tmp=sxceil
aden=tmp
for i in 1...w: aden=aden*(tmp+i)
a=anum/aden
if ZeroOrOne(a[0], a[1])==1: return w
end
END METHOD
Geometric Distribution
The geometric distribution is a negative binomial distribution with successes = 1
. In this document, a geometric random variate is the number of failures that have happened before one success happens. For example, if p
is 1/2, the geometric distribution models the task "Flip a coin until you get tails, then count the number of heads." As a unique property of the geometric distribution, given that n
trials have failed, the number of new failing trials has the same distribution (where n
is an integer greater than 0).
Notes:
 The negative binomial and geometric distributions are defined differently in different works. For example, Mathematica's definition excludes the last success, but the definition in (Devroye 1986, p. 498)[^19] includes it. And some works may define a negative binomial number as the number of successes before N failures, rather than vice versa.
 A bounded geometric random variate is either n (an integer greater than 0) or a geometric random variate, whichever is less. Exact and efficient samplers for the geometric and bounded geometric distributions are given in (Bringmann and Friedrich 2013)[^53] and described in my "Miscellaneous Observations on Randomization".)
Exponential Distribution
The exponential distribution uses a parameter known as λ, the rate, or the inverse scale. Usually, λ is the probability that an independent event of a given kind will occur in a given span of time (such as in a given day or year), and the random result is the number of spans of time until that event happens. Usually, λ is equal to 1, or 1/1. 1/λ is the scale (mean), which is usually the average waiting time between two independent events of the same kind.
In this document, Expo(lamda)
is an exponentiallydistributed random variate with the rate lamda
. For algorithms to sample exponential random variates to arbitrary precision, see "PartiallySampled Random Numbers".
Poisson Distribution
The Poisson distribution uses a parameter mean
(also known as λ). λ is the average number of independent events of a certain kind per fixed unit of time or space (for example, per day, hour, or square kilometer). A Poissondistributed number is the number of such events within one such unit.
In this document, Poisson(mean)
is a Poissondistributed number if mean
is greater than 0, or 0 if mean
is 0.
The method PoissonInt
generates a Poisson random variate with mean mx
/my
, with the Poisson1
method using an algorithm by Duchon and Duvignau (2016)[^54],
METHOD Poisson1()
ret=1; a=1; b=0
while true // until this method returns
j=RNDINT(a)
if j<a and j<b: return ret
if j==a: ret=ret+1
else
ret=ret1; b=a+1
end
a=a+1
end
END METHOD
METHOD PoissonInt(mx, my)
if my == 0: return error
if mx == 0 or (mx < 0 and my < 0) or (mx > 0 and my < 0): return 0
r=0
while mx>=my
r=r+Poisson1(); mx=mxmy
end
if mx>0
// At this point, mx/my < 1, so sum a Poisson number
// of coin flips with heads prob. mx/my; see Devroye 1986, p. 487
r=r+BinomialInt(Poisson1(), mx, my)
end
return r
END METHOD
Note: To generate a sum of n
independent Poisson random variates with separate means, generate a Poisson random variate whose mean is the sum of those means (see (Devroye 1986)[^19], p. 501). For example, to generate a sum of 1000 independent Poisson random variates with a mean of 1/1000000, simply generate PoissonInt(1, 1000)
(because 1/1000000 * 1000 = 1/1000).
Pólya–Eggenberger Distribution
Suppose items are drawn at random from a collection of items each labeled either 1
or 0
, and after drawing an item, it's put back and m
more items of the same label are added. Then:
 The Pólya–Eggenberger distribution models the number of items drawn this way that are labeled
1
.  The inverse Pólya–Eggenberger distribution models the number of
0
labeled items drawn before successes
many 1
labeled items are drawn.
(Johnson and Kotz 1969)[^55]. In the methods below, trials
is the number of items drawn at random, ones
is the number of items labeled 1
in the collection, count
is the number of items labeled 1
or 0
in that collection, m
is the number of items added after each draw (or −1 for sampling without replacement), and successes
is the number of 1
labeled items drawn.
METHOD PolyaEggenberger(trials, ones, count, m)
if ones < 0 or count < 0 or trials < 0 or
ones > count or trials > count
return error
end
if ones == 0: return 0
zeros=countones
ret=0
for i in 0...trials
if zeros==0 or ZeroOrOne(ones,zeros)==1
ones=ones+m
ret=ret+1
else: zeros=zeros+m
end
return ret
END METHOD
METHOD InversePolyaEggenberger(successes, ones, count, m)
if ones <= 0 or count < 0 or successes < 0 or
ones > count or successes > count
return error
end
zeros=countones
ret=0; trials=0
while ret<successes
if zeros==0 or ZeroOrOne(ones,zeros)==1
ones=ones+m
ret=ret+1
else: zeros=zeros+m
trials=trials+1
end
return trialssuccesses
END METHOD
Notes:
 A hypergeometric distribution is a Pólya–Eggenberger distribution with
m=1
. For example, in a 52card deck of AngloAmerican playing cards, 12 of the cards are face cards (jacks, queens, or kings). After the deck is shuffled and seven cards are drawn, the number of face cards drawn this way follows a hypergeometric distribution where trials
is 7, ones
is 12, count
is 52, and m
is −1.  A negative hypergeometric distribution is an inverse Pólya–Eggenberger distribution with
m=1
.
Random Integers with a Given Positive Sum
The following pseudocode shows how to generate n
random integers with a given positive sum, in random order (specifically, a uniformly chosen random partition of that sum into n
parts with repetition and in random order). (The algorithm for this was presented in (Smith and Tromble 2004)[^56].) In the pseudocode below—
 the method
PositiveIntegersWithSum
returns n
integers greater than 0 that sum to total
, in random order,  the method
IntegersWithSum
returns n
integers 0 or greater that sum to total
, in random order, and Sort(list)
sorts the items in list
in ascending order (however, sort algorithms are outside the scope of this document).
METHOD PositiveIntegersWithSum(n, total)
if n <= 0 or total <=0: return error
ls = [0]
ret = NewList()
while size(ls) < n
c = RNDINTEXCRANGE(1, total)
found = false
for j in 1...size(ls)
if ls[j] == c
found = true
break
end
end
if found == false: AddItem(ls, c)
end
Sort(ls)
AddItem(ls, total)
for i in 1...size(ls): AddItem(ret,
ls[i]  ls[i  1])
return ret
END METHOD
METHOD IntegersWithSum(n, total)
if n <= 0 or total <=0: return error
ret = PositiveIntegersWithSum(n, total + n)
for i in 0...size(ret): ret[i] = ret[i]  1
return ret
END METHOD
Notes:
 To generate
N
random integers with a given positive average avg
(an integer), in random order, generate IntegersWithSum(N, N * avg)
.  To generate
N
random integers min
or greater and with a given positive sum sum
(an integer), in random order, generate IntegersWithSum(N, sum  N * min)
, then add min
to each number generated this way. The Python sample code implements an efficient way to generate such integers if each one can't exceed a given maximum; the algorithm is thanks to a Stack Overflow answer (questions/61393463
) by John McClane.  To generate
N
rational numbers that sum to tx
/ty
, call IntegersWithSum(N, tx * ty * x)
or PositiveIntegersWithSum(N, tx * ty * x)
as appropriate (where x
is the desired accuracy as an integer, such as pow(2, 32)
or pow(2, 53)
, so that the results are accurate to 1/x
or less), then for each number c
in the result, convert it to MakeRatio(c, tx * ty * x) * MakeRatio(tx, ty)
.
Multinomial Distribution
The multinomial distribution uses two parameters: trials
and weights
. It models the number of times each of several mutually exclusive events happens among a given number of trials (trials
), where each event can have a separate probability of happening (given as a list of weights
).
A trivial implementation is to fill a list with as many zeros as weights
, then for each trial, choose index = WeightedChoice(weights)
and add 1 to the item in the list at the chosen index
. The resulting list follows a multinomial distribution. The pseudocode below shows an optimization suggested in (Durfee et al., 2018, Corollary 45)[^57], but assumes all weights are integers.
METHOD Multinomial(trials, weights)
if trials < 0: return error
// create a list of successes
list = []
ratios = []
sum=Sum(weights)
for i in 0...size(weights): AddItem(ratios,
MakeRatio(weights[i], sum))
end
for i in 0...size(weights)
r=ratios[i]
b=BinomialInt(t,r[0],r[1])
AddItem(list, b)
trials=trialsb
if trials>0: for j in range(i+1,
len(weights)): ratios[j]=ratios[j]/(1r)
end
return list
END METHOD
Randomization with Real Numbers
This section describes randomization methods that use random real numbers, not just random integers. These include random rational numbers, fixedpoint numbers, and floatingpoint numbers.
But whenever possible, applications should work with random integers, rather than other random real numbers. This is because:
 No computer can choose from among all real numbers between two others, since there are infinitely many of them.
 Algorithms that work with integers are more portable than those that work with other real numbers, especially floatingpoint numbers.[^58] Integer algorithms are easier to control for their level of accuracy.
 For applications that may care about reproducible "random" numbers (unit tests, simulations, machine learning, and so on), using noninteger numbers (especially floatingpoint numbers) can complicate the task of making a method reproducible from run to run or across computers.
The methods in this section should not be used to sample at random for information security purposes, even if a secure "source of random numbers" is available. See "Security Considerations" in the appendix.
Uniform Random Real Numbers
This section defines a method, namely RNDRANGEMinMaxExc(a, b)
, to generate independent "uniform" random real numbers greater than a
and less than b
.[^59]
The section shows how this method can be implemented for fixedpoint, rational, and floatingpoint numbers. However, all three formats use a predetermined and fixed precision. Other formats for random real numbers don't have this limitation and include partiallysampled random numbers and "constructive reals" or "recursive reals" (Boehm 2020)[^60].
For FixedPoint Number Formats
For fixedpoint number formats representing multiples of 1/n
, this method is trivial. The following returns an integer that represents a fixedpoint number. In the method below (and in the note), fpa
and fpb
are the bounds of the fixedpoint number generated and are integers that represent fixedpoint numbers (such that fpa = a * n
and fpb = b * n
). For example, if n
is 100, to generate a number in the open interval (6.35, 9.96), generate RNDRANGEMinMaxExc(6.35, 9.96)
or RNDINTRANGE(635 + 1, 996  1)
.
RNDRANGEMinMaxExc(a, b)
: RNDINTRANGE(fpa + 1, fpb  1)
, or an error if fpa >= fpb or a == fpb  1
. But if a
is 0 and b
is 1: (RNDINT(n  2) + 1)
or (RNDINTEXC(n  1) + 1)
.
Note: Additional methods to sample fixedpoint numbers in a different interval are given below, but are not used in the rest of this article.
RNDRANGE(a, b)
, interval [a
, b
]: RNDINTRANGE(fpa, fpb)
. But if a
is 0 and b
is 1: RNDINT(n)
. RNDRANGEMinExc(a, b)
, interval (a
, b
]: RNDINTRANGE(fpa + 1, fpb)
, or an error if fpa >= fpb
. But if a
is 0 and b
is 1: (RNDINT(n  1) + 1)
or (RNDINTEXC(n) + 1)
. RNDRANGEMaxExc(a, b)
, interval [a
, b
): RNDINTEXCRANGE(fpa, fpb)
. But if a
is 0 and b
is 1: RNDINTEXC(n)
or RNDINT(n  1)
.
For Rational Number Formats
A rational number is a ratio of integers. If the rational number's denominator is n
(which must be 1 or greater), use the previous section to generate its numerator, so that the rational number is a multiple of 1/n
.
For FloatingPoint Number Formats
For floatingpoint number formats representing numbers of the form FPSign
* s
* FPRADIX
^{e} [^61], the following pseudocode implements RNDRANGEMinMaxExc(lo, hi)
. In the pseudocode:
MINEXP
is the lowest exponent a number can have in the floatingpoint format. For the IEEE 754 binary64 format (Java double
), MINEXP = 1074
. For the IEEE 754 binary32 format (Java float
), MINEXP = 149
. FPPRECISION
is the number of significant digits in the floatingpoint format, whether the format stores them as such or not. Equals 53 for binary64, or 24 for binary32. FPRADIX
is the digit base of the floatingpoint format. Equals 2 for binary64 and binary32. FPExponent(x)
returns the value of e
for the number x
such that the number of digits in s
equals FPPRECISION
. Returns MINEXP
if x = 0
or if e
would be less than MINEXP
. FPSignificand(x)
returns s
, the significand of the number x
. Returns 0 if x = 0
. Has FPPRECISION
digits unless FPExponent(x) == MINEXP
. FPSign(x)
returns either 1 or 1 indicating whether the number is positive or negative. Can be −1 even if s
is 0.
See also (Downey 2007)[^62] and the Rademacher FloatingPoint Library.
METHOD RNDRANGEMinMaxExc(lo, hi)
if mn >= mx: return error
return RNDRANGEHelper(lo, hi)
END METHOD
METHOD RNDRANGEHelper(lo, hi)
losgn = FPSign(lo)
hisgn = FPSign(hi)
loexp = FPExponent(lo)
hiexp = FPExponent(hi)
losig = FPSignificand(lo)
hisig = FPSignificand(hi)
if lo > hi: return error
if losgn == 1 and hisgn == 1: return error
if losgn == 1 and hisgn == 1
// Straddles negative and positive ranges
// NOTE: Changes negative zero to positive
mabs = max(abs(lo),abs(hi))
while true // until a value is returned
ret=RNDRANGEHelper(0, mabs)
neg=RNDINT(1)
if neg==0: ret=ret
if ret>=lo and ret<=hi: return ret
end
end
if lo == hi: return lo
if losgn == 1
// Negative range
return RNDRANGEHelper(abs(lo), abs(hi))
end
// Positive range
expdiff=hiexploexp
if loexp==hiexp
// Exponents are the same
// NOTE: Automatically handles
// subnormals
s=RNDINTRANGE(losig, hisig)
return s*1.0*pow(FPRADIX, loexp)
end
while true // until a value is returned
ex=hiexp
while ex>MINEXP
v=RNDINTEXC(FPRADIX)
if v==0: ex=ex1
else: break
end
s=0
if ex==MINEXP
// Has FPPRECISION or fewer digits
// and so can be normal or subnormal
s=RNDINTEXC(pow(FPRADIX,FPPRECISION))
else if FPRADIX != 2
// Has FPPRECISION digits
s=RNDINTEXCRANGE(
pow(FPRADIX,FPPRECISION1),
pow(FPRADIX,FPPRECISION))
else
// Has FPPRECISION digits (bits), the highest
// of which is always 1 because it's the
// only nonzero bit
sm=pow(FPRADIX,FPPRECISION1)
s=RNDINTEXC(sm)+sm
end
ret=s*1.0*pow(FPRADIX, ex)
if ret>=lo and ret<=hi: return ret
end
END METHOD
Notes:

Additional methods to sample "uniform" floatingpoint numbers in a different interval are given below, but are not used in the rest of this article.
RNDRANGE(mn, mx)
, interval [mn
, mx
]: Generate RNDRANGEHelper(mn, mx)
. RNDRANGEMaxExc(mn, mx)
, interval [mx
, mx
): If mn >= mx
, return an error. Otherwise, generate RNDRANGEHelper(mn, mx)
in a loop until a number other than mx
is generated this way. RNDRANGEMinExc(mn, mx)
, interval (mn
, mx
]: If mn >= mx
, return an error. Otherwise, generate RNDRANGEHelper(mn, mx)
in a loop until a number other than mn
is generated this way.

Many software libraries sample "uniform" real numbers by multiplying or dividing a uniform random integer by a constant. For example, a method to sample "uniformly" at random from the halfopen interval [0, 1) is often implemented like RNDINTEXC(X) * (1.0/X)
or RNDINTEXC(X) / X
, where X varies based on the software library.[^63] The disadvantage here is that doing so does not necessarily cover all numbers a floatingpoint format can represent in the range (Goualard 2020)[^64]. As another example, a method to sample "uniformly" at random from the halfopen interval [a
, b
) is often implemented like a + Math.random() * (b  a)
, where Math.random()
is a "uniform" random floatingpoint number in [0, 1); however, this not only has the same disadvantage, but has many other issues where floatingpoint numbers are involved (Monahan 1985)[^65].
Monte Carlo Sampling: Expected Values, Integration, and Optimization
Requires random real numbers.
Randomization is the core of Monte Carlo sampling. There are three main uses of Monte Carlo sampling: estimation, integration, and optimization.

Estimating expected values. Monte Carlo sampling can help estimate the expected value (mean or "longrun average") of a sampling distribution, or of a function of values sampled from that distribution. This function is called EFUNC(x)
in this section, where x
is one of the values in the sample. Algorithms to estimate expected values are called estimators. One such estimator is to sample n
values, apply EFUNC(x)
to each sampled value x
, add the values, and divide by n
(see note below). However, this estimator won't work for all distributions, since they may have an infinite expected value, and it also doesn't allow controlling for the estimate's error. This estimator is called:
 The
n
th sample raw moment (a raw moment is a mean of n
th powers) if EFUNC(x)
is pow(x, n)
.  The sample mean, if
EFUNC(x)
is x
or pow(x, 1)
.  The
n
th sample central moment (a central moment is a moment about the mean) if EFUNC(x)
is pow(xm, n)
, where m
is the sample mean.  The (biased) sample variance, the second sample central moment.
 The sample probability, if
EFUNC(x)
is 1
if some condition is met or 0
otherwise.
There are two sources of error in Monte Carlo estimators: bias and variance. An estimator is unbiased (has bias 0) if its expected value equals the distribution's expected value. For example, any n
th sample raw moment is an unbiased estimator provided the sample size is at least n
, but the sample variance is not unbiased, and neither is one for any sample central moment other than the first (Halmos 1946)[^66]. ("Variance reduction" methods are outside the scope of this document.) An estimator's mean squared error equals variance plus square of bias.
For Monte Carlo estimators with accuracy guarantees, see "Randomized Estimation Algorithms".

Monte Carlo integration. This is usually a special case of Monte Carlo estimation that approximates a multidimensional integral over a sampling domain; here, EFUNC(z)
is the function to find the integral of, where z
is a randomly chosen point in the sampling domain (such as 1 if the point is in the true volume and 0 if not).

Stochastic optimization. This uses randomness to help find the minimum or maximum value of a function with one or more variables; examples include simulated annealing and simultaneous perturbation stochastic approximation (see also (Spall 1998)[^67]).
Note: Assuming the true population has a finite mean and variance, the sample mean is an unbiased estimator of the mean, but the sample variance is generally a biased estimator of variance for every sample smaller than the whole population. The following pseudocode returns a twoitem list containing the sample mean and an unbiased estimator of the variance, in that order, of a list of real numbers (list
), using the Welford method presented by J. D. Cook. The square root of the variance calculated here is what many APIs call a standard deviation (for example, Python's statistics.stdev
). For the usual (biased) sample variance, replace (size(list)1)
with size(list)
in the pseudocode shown next. The pseudocode follows: if size(list)==0: return [0, 0]; if size(list)==1: return [list[0], 0]; xm=list[0]; xs=0; i=1; while i < size(list); c = list[i]; i = i + 1; cxm = (c  xm); xm = xm + cxm *1.0/ i; xs = xs + cxm * (c  xm); end; return [xm, xs*1.0/(size(list)1)]
.
Point Sample Selection
Requires random real numbers.
Various methods have been developed for selecting a uniformbehaving sample of points, especially for Monte Carlo methods.
Among these methods, a lowdiscrepancy sequence (or quasirandom point set or quasiMonte Carlo point set) is a deterministic sequence of points with a low discrepancy to the uniform distribution on the box, as compared to independent points from that distribution. The following are examples:
 A baseN van der Corput sequence is generated as follows: For each nonnegative integer index in the sequence, take the index as a baseN number, then divide the least significant baseN digit by N, the next digit by N^{2}, the next by N^{3}, and so on, and add together these results of division.
 A Halton sequence is a set of two or more van der Corput sequences with different prime bases; a Halton point at a given index has coordinates equal to the points for that index in the van der Corput sequences.
 Roberts, M., in "The Unreasonable Effectiveness of Quasirandom Sequences", presents a lowdiscrepancy sequence based on a "generalized" version of the golden ratio.
 Sobol sequences are explained in "Sobol sequence generator" by S. Joe and F. Kuo.
The points of a lowdiscrepancy sequence can be "scrambled" with the help of a pseudorandom number generator (or another device or program that simulates a "source of random numbers"). In Monte Carlo sampling, lowdiscrepancy sequences are often used to achieve more efficient "random" sampling, but in general, they can be safely used this way only if none of their points is skipped (Owen 2020)[^68].
Other methods that likewise produce a uniformbehaving point sample include the following.
 Stratified sampling divides an Ndimensional box into smaller boxes of the same size and chooses one or more points uniformly at random in each box.
 Latin hypercube sampling can be implemented using the following pseudocode for an
n
number sequence: lhs = []; for i in 0...n: AddItem(RNDRANGEMinMaxExc(i*1.0/n,(i+1)*1.0/n)); lhs = Shuffle(lhs)
.  Special versions of pseudorandom number generators. One example is linear congruential generators with modulus
m
, a full period, and "good lattice structure"; a sequence of n
dimensional points is then [MLCG(i), MLCG(i+1), ..., MLCG(i+n1)]
for each integer i
in the interval [1, m
] (L'Ecuyer 1999)[^69]. One example is MLCG(seed)
: rem(92717*seed,262139)/262139.0
. Another example is certain linear feedback shift register generators (Harase 2020)[^70].  If a lowdiscrepancy sequence outputs numbers in the interval [0, 1], the Baker's map of the sequence is
2 * (MakeRatio(1,2)abs(x  MakeRatio(1,2)))
, where x
is each number in the sequence.  Other random point sampling methods, including Poisson disk sampling, the "best candidate algorithm", and Nfarthestpoints, are described in Kamath (2022)[^71].
Notes on Randomization Involving Real Numbers
Requires random real numbers.
Random Walks: Additional Examples
 One example of a white noise process is a list of
Normal(0, 1)
numbers (Gaussian white noise).  If
STATEJUMP()
is RNDRANGEMinMaxExc(1, 1)
, the random state is advanced by a random real number in the interval (1, 1).  A continuoustime process models random behavior at every moment, not just at discrete times. There are two popular examples:
 A Wiener process (also known as Brownian motion) has random states and jumps that are normally distributed. For a random walk that follows a Wiener process,
STATEJUMP()
is Normal(mu * timediff, sigma * sqrt(timediff))
, where mu
is the drift (or average value per time unit), sigma
is the volatility, and timediff
is the time difference between samples. A Brownian bridge (Revuz and Yor 1999)[^72] modifies a Wiener process as follows: For each time X, calculate W(X)  W(E) * (X  S) / (E  S)
, where S
and E
are the starting and ending times of the process, respectively, and W(X)
and W(E)
are the state at times X and E, respectively.  In a Poisson point process, the time between each event is its own exponential random variate with its own rate parameter (for example,
Expo(rate)
) (see "Exponential Distribution"), and sorting N random RNDRANGEMinMaxExc(x, y)
expresses N arrival times in the interval [x, y]
. The process is homogeneous if all the rates are the same, and inhomogeneous if the rate is a function of the "timestamp" before each event jump (the hazard rate function); to generate arrival times here, potential arrival times are generated at the maximum possible rate (maxrate
) and each one is accepted if RNDRANGEMinMaxExc(0, maxrate) < thisrate
, where thisrate
is the rate for the given arrival time (Lewis and Shedler 1979)[^73].
Transformations: Additional Examples
 Bates distribution: Find the mean of n uniform random variates in a given range (such as variates generated by
RNDRANGEMinMaxExc(minimum, maximum)
) (strategy 8, mean).  A random point (
x
, y
) can be transformed (strategy 9, geometric transformation) to derive a point with correlated random coordinates (old x
, new x
) as follows (see (Saucier 2000)[^74], sec. 3.8): [x, y*sqrt(1  rho * rho) + rho * x]
, where x
and y
are independent numbers chosen at random in the same way, and rho
is a correlation coefficient in the interval [1, 1] (if rho
is 0, x
and y
are uncorrelated).  It is reasonable to talk about sampling the sum or mean of N random variates, where N has a fractional part. In this case,
ceil(N)
random variates are generated and the last variate is multiplied by that fractional part. For example, to sample the sum of 2.5 random variates, generate three random variates, multiply the last by 0.5 (the fractional part of 2.5), then add together all three variates.  A hypoexponential distribution models the sum of n random variates that follow an exponential distribution and each have a separate rate parameter (see "Exponential Distribution").
 The maximal coupling method mentioned by P. Jacob generates correlated random variates from two distributions, P and Q, with known probability density functions or PDFs (
PPDF
and QPDF
, respectively); this works only if the area under each PDF is 1: Sample a number x
at random from distribution P, and if RNDRANGEMinMaxExc(0, PPDF(x)) < QPDF(x)
, return [x, x]
. Otherwise, sample a number y
at random from distribution Q until PPDF(y) < RNDRANGEMinMaxExc(0, QPDF(y))
, then return [x, y]
.
Sampling from a Distribution of Data Points
Requires random real numbers.
Generating random data points based on how a list of data points is distributed involves the field of machine learning: fit a data model to the data points, then predict a new data point based on that model, with randomness added to the mix. Three kinds of data models, described below, serve this purpose. (How fitting works is outside the scope of this page.)

Density estimation models. Density estimation models seek to describe the distribution of data points in a given data set, where areas with more points have a greater chance to be sampled.[^75] The following are examples.
 Histograms are sets of one or more nonoverlapping bins, which are generally of equal size. Histograms are mixtures, where each bin's weight is the number of data points in that bin. After a bin is randomly chosen, a random data point that could fit in that bin is generated (that point need not be an existing data point).
 Gaussian mixture models are also mixtures, in this case, mixtures of one or more Gaussian (normal) distributions.
 Kernel distributions are mixtures of sampling distributions, one for each data point. Estimating a kernel distribution is called kernel density estimation. To sample from a kernel distribution:
 Choose one of the numbers or points in the list uniformly at random with replacement.
 Add a randomized "jitter" to the chosen number or point; for example, add a separately generated
Normal(0, sigma)
to the chosen number or each component of the chosen point, where sigma
is the bandwidth[^76].
 Stochastic interpolation is described in (Saucier 2000)[^74], sec. 5.3.4.
 Fitting a known distribution (such as the normal distribution), with unknown parameters, to data can be done by maximum likelihood estimation, among other ways.

Regression models. A regression model is a model that summarizes data as a formula and an error term. If an application has data in the form of inputs and outputs (for example, monthly sales figures) and wants to sample a random but plausible output given a known input point (for example, sales for a future month), then the application can fit and sample a regression model for that data. For example, a linear regression model, which simulates the value of y
given known inputs a
and b
, can be sampled as follows: y = c1 * a + c2 * b + c3 + Normal(0, sqrt(mse))
, where mse
is the mean squared error and c1
, c2
, and c3
are the coefficients of the model. (Here, Normal(0, sqrt(mse))
is the error term.)

Generative models. These are machine learning models that take random variates as input and generate outputs (such as images or sounds) that are similar to examples they have already seen.
Notes:
 Usually, more than one kind of data model and/or machine learning model is a possible choice to fit to a given data set (for example, multiple kinds of density estimation models, regression models, parametric distributions, and/or decision trees). If several kinds of model are fitting choices, then the simplest kind that shows an acceptable predictive accuracy for the data set (for example, information criterion, precision, recall) should be chosen.
 If the existing data points each belong in one of several categories, choosing a random category could be done by choosing a number at random with probability proportional to the number of data points in each category (see "Weighted Choice").
 If the existing data points each belong in one of several categories, choosing a random data point and its category could be done—
 by choosing a random data point based on all the existing data points, then finding its category (for example, via machine learning models known as classification models), or
 by choosing a random category as given above, then by choosing a random data point based only on the existing data points of that category.
Sampling from an Arbitrary Distribution
Requires random real numbers.
Many probability distributions can be defined in terms of any of the following:
 The cumulative distribution function, or CDF,
CDF(x)
, is the probability of choosing a number less than or equal to x
at random. The probabilities are in the interval [0, 1].  Discrete distributions[^77] have a probability mass function, or PMF, which gives the probability that each number is randomly chosen.
 Absolutely continuous distributions have a probability density function, or PDF,
PDF(x)
, which is the "slope" function of the CDF, or the relative probability of choosing a number "close" to x
at random. The relative probabilities are 0 or greater, and the area under the PDF is 1.  The quantile function (also known as inverse cumulative distribution function or inverse CDF) maps numbers in the interval (0, 1) to numbers in the distribution, from low to high.
In this section, a PDFlike function is the PDF, the PMF, or either function times a (possibly unknown) positive constant.
The following sections show different ways to generate random variates based on a distribution, depending on what is known about that distribution.
Note: Lists of CDFs, PDFlike functions, or quantile functions are outside the scope of this page.
Sampling for Discrete Distributions
If the distribution is discrete, numbers that closely follow it can be sampled by choosing points that cover all or almost all of the distribution, finding their weights or cumulative weights, and choosing a random point based on those weights.
If—
 the discrete distribution has a known PDFlike function
PDF(x)
, where x
must be an integer,  the interval [
mini
, maxi
] covers all the distribution, and  the function's values are all rational numbers (numbers of the form
y/z
where y
and z
are integers),
the following method samples exactly from that distribution:
METHOD SampleDiscrete(mini, maxi)
// Setup
ratios=[]
for i in mini..maxi: AddItem(ratios, PDF(i))
ratios=NormalizeRatios(ratios)
// Sampling
return mini + WeightedChoice(ratios)
END METHOD
If—
 the discrete distribution has a known CDF
CDF(x)
, where x
must be an integer,  the interval [
mini
, maxi
] covers all the distribution, and  the CDF's values are all rational numbers,
the following method samples exactly from that distribution:
METHOD SampleDiscreteCDF(mini, maxi)
// Setup
ratios=[MakeRatio(0,1)]
for i in mini..maxi: AddItem(ratios, CDF(i))
ratios=NormalizeRatios(ratios)
// Sampling
value=ratios[size(ratios)  1]
for i in 0...size(ratios)  1
if ratios[i] < ratios[i+1] and
ratios[i]>=value: return mini + i
end
return mini
END METHOD
In other cases, the discrete distribution can still be approximately sampled. The following cases will lead to an approximate sampler unless the values of the CDF or PDFlike function cover all the distribution and are calculated exactly (without error).
 If the values of the CDF or PDFlike function are calculated as floatingpoint numbers of the form
FPSignificand
* FPRadix
^{FPExponent} (which include Java's double
and float
)[^78], there are various ways to turn these numbers to rational numbers or integers.
 One way is to use
FPRatio(x)
(in the pseudocode below), which is lossless and calculates the rational number for the given floatingpoint number x
.  Another way is to scale and round the values to integers (for example,
floor(x * mult)
if floor(x * mult) < 0.5
and ceil(x * mult)
otherwise, where mult
is a large integer); this is not lossless.  A third way is to approximate the values of the PDFlike function to integers in a way that bounds the error, such as given in (Saad et al., 2020)[^79]; this is not lossless and works only for PDFlike functions.
 If the values of the CDF or PDFlike function are calculated as rational numbers, these numbers can be turned into integer weights using either
NormalizeRatios
, which is lossless, or (2) or (3) above, which are not.  If the distribution takes on an infinite number of values, an appropriate interval [
mini
, maxi
] can be chosen that covers almost all of the distribution.
METHOD FPRatio(fp)
expo=FPExponent(fp)
sig=FPSignificand(fp)
radix=FPRadix(fp)
if expo>=0: return MakeRatio(sig * pow(radix, expo), 1)
return MakeRatio(sig, pow(radix, abs(expo)))
END METHOD
Note: In addition, some distributions are known only through an oracle (or "black box") that produces random variates that follow that distribution. Algorithms can use this oracle to produce new random variates that follow a different distribution. When the mean ("longrun average") of the new variates equals the oracle's, the algorithm is called an unbiased estimator (because in a way, it "estimates" some aspect of the oracle's numbers). One example is the Bernoulli factory (see my article "Bernoulli Factory Algorithms"), which takes flips of a coin with one probability of heads (the oracle) and produces the flip of a new "coin" with a different probability of heads. Another example is the "Bernoulli race" described in Weighted Choice.
Inverse Transform Sampling
Inverse transform sampling (or simply inversion) is the most generic way to sample a number from a probability distribution.
If the distribution has a known quantile function, generate a uniform random variate in (0, 1) if that number wasn't already pregenerated, and take the quantile of that number. However:
 In most cases, the quantile function is not available. Thus, it has to be approximated.
 Even if the quantile function is available, a naïve quantile calculation (for example,
ICDF(RNDRANGEMinMaxExc(0, 1))
) may mean that small changes in the uniform number lead to huge changes in the quantile, leading to gaps in sampling coverage (Monahan 1985, sec. 4 and 6)[^65].
The following method samples from a distribution via inversion, with an accuracy of 1/BASE
^{precision} ((Devroye and Gravel 2020)[^11], but extended for any base; see also (Bringmann and Friedrich 2013, Appendix A)[^53]). In the method, ICDF(u, ubits, prec)
returns a twoitem list containing upper and lower bounds, respectively, of a number that is within 1/BASE
^{prec} of the true quantile of u
/BASE
^{ubits}, and BASE
is the digit base (for example, 2 for binary or 10 for decimal).
METHOD Inversion(precision)
u=0
ubits=0
threshold=MakeRatio(1,pow(BASE, precision))*2
incr=8
while true // until a value is returned
incr=8
if ubits==0: incr=precision
// NOTE: If a uniform number (`n`) is already pregenerated,
// use the following instead:
// u = rem(floor(n*pow(BASE, ubits+incr)), pow(BASE, incr))
u=u*pow(BASE,incr)+RNDINTEXC(pow(BASE,incr))
ubits=ubits+incr
// Get upper and lower bound
bounds=ICDF(u,ubits,precision)
if lower>upper: return error
diff=bounds[1]bounds[0]
if diff<=threshold: return bounds[1]+diff/2
end
end
Some applications need to convert a pregenerated number in [0, 1] (usually a number sampled from a uniform distribution), called u01
below, to a nonuniform distribution via quantiles. Notable cases include copula methods, order statistics, and Monte Carlo methods involving lowdiscrepancy sequences. The following way to compute quantiles is exact in theory:
 Distribution is discrete, with known PMF (and the distribution takes on integers): Sequential search (Devroye 1986, p. 85)[^19]:
i = 0; p = PMF(i); while u01 > p; u01 = u01  p; i = i + 1; p = PMF(i); end; return p
, but this is not always fast. (This works only if PMF
's values sum to 1, which is why a PMF and not a PDFlike function is allowed here.)
In addition, the following methods approximate the quantile:
 Distribution is discrete, with known PDFlike function (and the distribution takes on integers): If the interval [a, b] covers all or almost all the distribution, then the application can store the PDFlike function's values in that interval in a list and call
WChoose
: wsum = 0; for i in a..b: wsum=wsum+PDF(i); for i in a..b: AddItem(weights, PDF(i)); return a + WChoose(weights, u01 * wsum)
. However, finding the quantile based on the CDF instead of a PDFlike function can introduce more error (Walter 2019)[^80]. See also integers_from_u01
in the Python sample code.  Distribution is absolutely continuous, with known PDFlike function:
ICDFFromContPDF(u01, mini, maxi, step)
, below, finds an approximate quantile based on a piecewise linear approximation of the PDFlike function in [mini
, maxi
], with pieces up to step
wide. (Devroye and Gravel 2020)[^11]. See also DensityInversionSampler
, numbers_from_u01
, and numbers_from_dist_inversion
(Derflinger et al. 2010)[^81], (Devroye and Gravel 2020)[^11] in the Python sample code [^82].  Distribution is absolutely continuous, with known CDF: See
numbers_from_u01
in the Python sample code.
METHOD ICDFFromContPDF(u01, mini, maxi, step)
pieces=[]
areas=[]
// Setup
lastvalue=i
lastweight=PDF(i)
cumuarea=0
i = mini+step; while i <= maxi
weight=i; value=PDF(i)
cumuarea=cumuarea+abs((weight + lastweight) * 0.5 *
(value  lastvalue))
AddItem(pieces,[lastweight,weight,lastvalue,value])
AddItem(areas,cumuarea)
lastweight=weight;lastvalue=value
if i==maxi: break
i = min(i + step, maxi)
end
for i in 0...size(areas): areas[i]=areas[i]/cumuarea
// Sampling
prevarea=0
for i in 0...size(areas)
cu=areas[i]
if u01<=cu
p=pieces[i]; u01=(u01prevarea)/(cuprevarea)
s=p[0]; t=p[1]; v=u01
if s!=t: v=(ssqrt(t*t*u01s*s*u01+s*s))/(st)
return p[2]+(p[3]p[2])*v
end
prevarea=cu
end
return error
END METHOD
Notes:
 If only percentiles of data (such as the median or 50th percentile, the minimum or 0th percentile, or the maximum or 100th percentile) are available, the quantile function can be approximated via those percentiles. The Nth percentile corresponds to the quantile for
N/100.0
. Missing values for the quantile function can then be filled in by interpolation (such as spline fitting). If the raw data points are available, see "Sampling from a Distribution of Data Points" instead.  Taking the
k
th smallest of n
random variates distributed the same way is the same as taking the k
th smallest of n
uniform random variates in the interval [0, 1) (also known as the k
th order statistic; for example, BetaDist(k, n+1k)
) and finding its quantile (Devroye 2006)[^83]; (Devroye 1986, p. 30)[^19].
Rejection Sampling with a PDFLike Function
If the distribution has a known PDFlike function (PDF
), and that function can be more easily sampled by another distribution with its own PDFlike function (PDF2
) that "dominates" PDF
in the sense that PDF2(x) >= PDF(x)
at every valid x
, then generate random variates with the latter distribution until a variate (call it n
) that satisfies r < PDF(n)
, where r = RNDRANGEMinMaxExc(0, PDF2(n))
, is generated this way (that is, sample points in PDF2
until a point falls within PDF
).
A variant of rejection sampling is the squeeze principle, in which a third PDFlike function (PDF3
) is chosen that is "dominated" by the first one (PDF
) and easier to sample than PDF
. Here, a number is accepted if r < PDF3(n)
or r < PDF(n)
, where r = RNDRANGEMinMaxExc(0, PDF2(n))
(Devroye 1986, p. 53)[^19].
See also (von Neumann 1951)[^44]; (Devroye 1986)[^19], pp. 4143; "Rejection Sampling"; and "Generating Pseudorandom Numbers".
Examples:
 To sample a random variate in the interval [
low
, high
) from a PDFlike function with a positive maximum value no greater than peak
at that interval, generate x = RNDRANGEMinMaxExc(low, high)
and y = RNDRANGEMinMaxExc(0, peak)
until y < PDF(x)
, then take the last x
generated this way. (See also Saucier 2000, pp. 67.) If the distribution is discrete and integervalued, generate x
with x = RNDINTEXCRANGE(low, high)
instead.  A PDFlike function for a custom distribution,
PDF
, is exp(abs(x*x*x))
, and the exponential distribution's, PDF2
, is exp(x)
. The exponential PDFlike function PDF2
"dominates" PDF
(at every x
0 or greater) if we multiply it by 1.5, so that PDF2
is now 1.5 * exp(x)
. Now we can generate numbers from our custom distribution by sampling exponential points until a point falls within PDF
. This is done by generating n = Expo(1)
until RNDRANGEMinMaxExc(0, PDF2(n)) < PDF(n)
.  The normal distribution's upsidedown bell curve has the PDFlike function
1exp((x*x))
, and the highest point for this function is peak = max(1exp((low*low)), 1exp((high*high)))
. Sampling this distribution then uses the algorithm in example 1.
Note: In the Python sample code, moore.py and numbers_from_dist
sample from a distribution via rejection sampling (Devroye and Gravel 2020)[^11], (Sainudiin and York 2013)[^84].
Alternating Series
If a PDFlike function for the target distribution is not known exactly, but can be approximated from above and below by two series expansions that converge to that function as more terms are added, the alternating series method can be used. This still requires a "dominating" PDFlike function (PDF2(x)
) to serve as the "easytosample" distribution. Call the series expansions UPDF(x, n)
and LPDF(x, n)
, respectively, where n
is the number of terms in the series to add. To sample the distribution using this method (Devroye 2006)[^83]: (1) Sample from the "dominating" distribution, and let x
be the sampled number; (2) set n
to 0; (3) accept x
if r < LPDF(x, n)
, or go to step 1 if r >= UPDF(x, n)
, or repeat this step with n
increased by 1 if neither is the case, where r = RNDRANGEMinMaxExc(0, PDF2(n))
.
MarkovChain Monte Carlo
Markovchain Monte Carlo (MCMC) is a family of algorithms for sampling from a probability distribution by building a Markov chain of random values that approach the given distribution as the chain takes more steps. In general, however, MCMC is approximate, and the values generated by a given chain will have a statistical dependence on each other (which is why techniques such as "thinning" — keeping only every Nth sample — are often employed).[^85]
MCMC algorithms[^86] include Metropolis–Hastings, slice sampling, and Gibbs sampling (see also the Python sample code). The latter is special in that it uses not a PDFlike function, but two or more distributions, each of which uses a number sampled at random from the previous distribution (conditional distributions), that converge to a joint distribution.
Example: In one Gibbs sampler, an initial value for y
is chosen, then multiple x
, y
pairs of random variates are generated, where x = BetaDist(y, 5)
then y = Poisson(x * 10)
.
Piecewise Linear Distribution
Requires random real numbers.
A piecewise linear distribution describes an absolutely continuous distribution with weights at known points and other weights determined by linear interpolation (smoothing). The PiecewiseLinear
method (in the pseudocode below) takes two lists as follows (see also (Kscischang 2019)[^87]):
values
is a list of rational numbers. The numbers should be arranged in ascending order. weights
is a list of rationalvalued weights for the given numbers (where each number and its weight have the same index in both lists). The greater a number's weight, the greater the probability that a number close to that number will be chosen. Each weight should be 0 or greater.
METHOD PiecewiseLinear(values, weights)
if size(values)!=size(weights) or size(values)==0: return error
if size(values)==1: return values[0]
areas=[]
for i in 1...size(values)
area=abs((weights[i] + weights[i1]) *
(values[i]  values[i1]) / 2) // NOTE: Not rounded
AddItem(areas,area)
end
// NOTE: If values and weights are rational
// numbers, use `areas=NormalizeRatios(areas)` instead
// of finding `areas` as given below.
ratios=[]
for w in areas: AddItem(ratios, FPRatio(w))
areas=NormalizeRatios(ratios)
index=WeightedChoice(areas)
w=values[index+1]values[index]
if w==0: return values[index]
m=(weights[index+1]weights[index])/w
h2=(weights[index+1]+weights[index])
ww=w/2.0; hh=h2/2.0
x=RNDRANGEMinMaxExc(ww, ww)
if RNDRANGEMinMaxExc(hh, hh)>x*m: x=x
return values[index]+x+ww
END METHOD
Note: The Python sample code contains a variant to the method above for returning more than one random variate in one call.
Example: Assume values
is the following: [0, 1, 2, 2.5, 3]
, and weights
is the following: [0.2, 0.8, 0.5, 0.3, 0.1]
. The weight for 2 is 0.5, and that for 2.5 is 0.3. Since 2 has a higher weight than 2.5, numbers near 2 have a greater probability of being chosen than numbers near 2.5 with the PiecewiseLinear
method.
Specific Distributions
Methods to sample additional distributions are given in a separate page. They cover the normal, gamma, beta, von Mises, stable, and multivariate normal distributions as well as copulas.
Index of NonUniform Distributions
Many distributions here require random real numbers.
A † symbol next to a distribution means that a sample from the distribution can be shifted by a location parameter (mu
) then scaled by a scale parameter greater than 0 (sigma
). Example: num * sigma + mu
.
A ⬦ symbol next to a distribution means the sample can be scaled to any range, which is given with the minimum and maximum values mini
and maxi
. Example: mini + (maxi  mini) * num
.
For further examples and distributions, see (Devroye 1996)[^88] and (Crooks 2019)[^89].
Most commonly used:
 Beta distribution⬦: See Beta Distribution.
 Binomial distribution: See Binomial Distribution.
 Binormal distribution: See Multivariate Normal (Multinormal) Distribution.
 Cauchy (Lorentz) distribution†:
Stable(1, 0)
. This distribution is similar to the normal distribution, but with "fatter" tails. Alternative algorithm based on one mentioned in (McGrath and Irving 1975)[^90]: Generate x = RNDRANGEMinMaxExc(0,1)
and y = RNDRANGEMinMaxExc(0,1)
until x * x + y * y <= 1
, then generate (RNDINT(1) * 2  1) * y / x
.  Chisquared distribution:
GammaDist(df * 0.5 + Poisson(sms * 0.5))*2
, where df
is the number of degrees of freedom and sms
is the sum of mean squares (where sms
other than 0 indicates a noncentral distribution).  Dice: See Dice.
 Exponential distribution: See Exponential Distribution. The naïve implementation
ln(1RNDRANGEMinMaxExc(0, 1)) / lamda
has several problems, such as being illconditioned at large values because of the distribution's rightsided tail (Pedersen 2018) [^1]. An application can reduce some of these problems by applying Pedersen's suggestion of using either ln(RNDRANGEMinMaxExc(0, 0.5))
or log1p(RNDRANGEMinMaxExc(0, 0.5))
(rather than ln(1RNDRANGEMinMaxExc(0, 1))
), chosen uniformly at random each time; an alternative is ln(1/RNDRANGEMinMaxExc(0,1))
mentioned in (Devroye 2006)[^83].  Extreme value distribution: See generalized extreme value distribution.
 Gamma distribution: See Gamma Distribution. Generalized gamma distributions include the Stacy distribution (
pow(GammaDist(a), 1.0 / c) * b
, where c
is another shape parameter) and the Amoroso distribution (Crooks 2015)[^91], (pow(GammaDist(a), 1.0 / c) * b + d
, where d
is the minimum value).  Gaussian distribution: See Normal (Gaussian) Distribution.
 Geometric distribution: See Geometric Distribution. The following is "exact" assuming computers can operate "exactly" on real numbers:
floor(Expo(1)/ln(1p))
(Devroye 1986, p. 500)[^19] (ceil replaced with floor because this page defines geometric distribution differently).  Gumbel distribution: See generalized extreme value distribution.
 Inverse gamma distribution:
b / GammaDist(a)
, where a
and b
have the same meaning as in the gamma distribution. Alternatively, 1.0 / (pow(GammaDist(a), 1.0 / c) / b + d)
, where c
and d
are shape and location parameters, respectively.  Laplace (double exponential) distribution†:
(Expo(1)  Expo(1))
. Also, Normal(0,1) * Normal(0, 1)  Normal(0, 1) * Normal(0, 1)
(Kotz et al. 2012)[^92].  Logarithmic distribution⬦:
RNDRANGEMinMaxExc(0, 1) * RNDRANGEMinMaxExc(0, 1)
(Saucier 2000, p. 26). In this distribution, lower numbers are exponentially more probable than higher numbers.  Logarithmic normal distribution:
exp(Normal(mu, sigma))
, where mu
and sigma
are the underlying normal distribution's parameters.  Multinormal distribution: See multivariate normal distribution.
 Multivariate normal distribution: See Multivariate Normal (Multinormal) Distribution.
 Normal distribution: See Normal (Gaussian) Distribution.
 Poisson distribution: See "Poisson Distribution". The following is "exact" assuming computers can operate "exactly" on real numbers (Devroye 1986, p. 504)[^19]:
c = 0; s = 0; while true; sum = sum + Expo(1); if sum>=mean: return c; else: c = c + 1; end
; and in addition the following optimization from (Devroye 1991)[^93] can be used: while mean > 20; n=ceil(meanpow(mean,0.7)); g=GammaDist(n); if g>=mean: return c+(n1Binomial(n1,(gmean)/g)); mean = mean  g; c = c + n; end
. For mean
greater than 50, the following approximation was suggested in (Giammatteo and Di Mascio 2020)[^92]: floor(1.0/3 + pow(max(0, Normal(0, 1)*pow(mean,1/6.0)*2/3 + pow(mean, 2.0/3)), 3.0/2))
.  Pareto distribution:
pow(RNDRANGEMinMaxExc(0, 1), 1.0 / alpha) * minimum
, where alpha
is the shape and minimum
is the minimum.  Rayleigh distribution†:
sqrt(Expo(0.5))
. If the scale parameter (sigma
) follows a logarithmic normal distribution, the result is a Suzuki distribution.  Standard normal distribution†:
Normal(0, 1)
. See also Normal (Gaussian) Distribution.  Student's tdistribution:
Normal(cent, 1) / sqrt(GammaDist(df * 0.5)*2 / df)
, where df
is the number of degrees of freedom, and cent is the mean of the normallydistributed random variate. A cent
other than 0 indicates a noncentral distribution. Alternatively, cos(RNDRANGEMinMaxExc(0, pi * 2)) * sqrt((pow(RNDRANGEMinMaxExc(0, 1),2.0/df)1) * df)
(Bailey 1994)[^94].  Triangular distribution† (Stein and Keblis 2009)[^95]:
(1alpha) * min(a, b) + alpha * max(a, b)
, where alpha
is in [0, 1], a = RNDRANGEMinMaxExc(0, 1)
, and b = RNDRANGEMinMaxExc(0, 1)
.  Weibull distribution: See generalized extreme value distribution.
Miscellaneous:
 Archimedean copulas: See Gaussian and Other Copulas.
 Arcsine distribution⬦:
BetaDist(0.5, 0.5)
(Saucier 2000, p. 14).  Bates distribution: See Transformations of Random Variates: Additional Examples.
 Beckmann distribution: See Multivariate Normal (Multinormal) Distribution.
 Beta binomial distribution:
Binomial(trials, BetaDist(a, b))
, where a
and b
are the two parameters of the beta distribution, and trials
is a parameter of the binomial distribution.  Beta negative binomial distribution:
NegativeBinomial(successes, BetaDist(a, b))
, where a
and b
are the two parameters of the beta distribution, and successes
is a parameter of the negative binomial distribution. If successes is 1, the result is a Waring–Yule distribution. A Yule–Simon distribution results if successes and b are both 1 (for example, in Mathematica) or if successes and a are both 1 (in other works).  BetaPERT distribution:
startpt + size * BetaDist(1.0 + (midpt  startpt) * shape / size, 1.0 + (endpt  midpt) * shape / size)
. The distribution starts at startpt
, peaks at midpt
, and ends at endpt
, size
is endpt  startpt
, and shape
is a shape parameter that's 0 or greater, but usually 4. If the mean (mean
) is known rather than the peak, midpt = 3 * mean / 2  (startpt + endpt) / 4
.  Beta prime distribution†:
pow(GammaDist(a), 1.0 / alpha) / pow(GammaDist(b), 1.0 / alpha)
, where a
, b
, and alpha
are shape parameters. If a is 1, the result is a Singh–Maddala distribution; if b is 1, a Dagum distribution; if a and b are both 1, a logarithmic logistic distribution.  Birnbaum–Saunders distribution:
pow(sqrt(4+x*x)+x,2)/(4.0*lamda)
, where x = Normal(0,gamma)
, gamma
is a shape parameter, and lamda
is a scale parameter.  Borel distribution (Borel 1942)[^108]:
r=0; q=1; while q>=1; q+=Poisson(la); q=1; r+=1; end; return r
. la
, the mean number of arrivals, should be in the interval (0, 1).  Chi distribution: Square root of a chisquared random variate. See chisquared distribution.
 Compound Poisson distribution: See Transformations of Random Variates: Additional Examples.
 Cosine distribution⬦:
atan2(x, sqrt(1  x * x)) / pi
, where x = (RNDINT(1) * 2  1) * RNDRANGEMinMaxExc(0, 1)
(Saucier 2000, p. 17; inverse sine replaced with atan2
equivalent).  CUB distribution (Piccolo 2003)[^107]:
if ZeroOrOne(px,py)==1: return 1+BinomialInt(m1, zyzx, zy); else: return RNDINTRANGE(1, m)
, where m>3
, px/py
is in [0, 1], and zx/zy
is in [0, 1].  Dagum distribution: See beta prime distribution.
 Dirichlet distribution: Suppose we (1) generate n+1 random gammadistributed variates, each with separate parameters; (2) take their sum; (3) divide each of them by that sum; then (4) multiply each of them by a real number
x
greater than 0. Then:
 After step (4), if
x
was 1, the Dirichlet distribution (for example, (Devroye 1986)[^23], p. 593594) models the first n of those numbers.  If the numbers at step (1) were each generated as
Expo(1)
(a special case of the gamma distribution), the result after step (4) is a uniformly distributed sum of n+1 numbers that sum to x
(see also linked article above).
 Double logarithmic distribution⬦:
(0.5 + (RNDINT(1) * 2  1) * RNDRANGEMinMaxExc(0, 0.5) * RNDRANGEMinMaxExc(0, 1))
(see also Saucier 2000, p. 15, which shows the wrong X axes).  Erlang distribution:
GammaDist(n)/lamda
, where n
is an integer greater than 0. Returns a number that simulates a sum of n
exponential random variates with the given lamda
parameter.  Estoup distribution: See zeta distribution.
 Exponential power distribution (generalized normal distribution version 1):
(RNDINT(1) * 2  1) * pow(GammaDist(1.0/a), a)
, where a
is a shape parameter.  Fréchet distribution: See generalized extreme value distribution.
 Fréchet–Hoeffding lower bound copula: See Gaussian and Other Copulas.
 Fréchet–Hoeffding upper bound copula: See Gaussian and Other Copulas.
 Gaussian copula: See Gaussian and Other Copulas.
 Generalized extreme value (Fisher–Tippett or generalized maximum value) distribution (
GEV(c)
)†: (pow(Expo(1), c)  1) / c
if c != 0
, or ln(Expo(1))
otherwise, where c
is a shape parameter. Special cases:
 The negative of the result expresses a generalized minimum value. In this case, a parameter of
c = 0
results in a Gumbel distribution.  A parameter of
c = 0
results in an extreme value distribution.  Weibull distribution:
1  1.0/a * GEV(1.0/a)
(or pow(Expo(1), 1.0/a)
), where a
is a shape parameter.  Fréchet distribution:
1 + 1.0/a * GEV(1.0/a)
(or pow(Expo(1), 1.0/a)
), where a
is a shape parameter.
 Generalized Tukey lambda distribution:
(s1 * (pow(x, lamda1)1.0)/lamda1  s2 * (pow(1.0x, lamda2)1.0)/lamda2) + loc
, where x
is RNDRANGEMinMaxExc(0, 1)
, lamda1
and lamda2
are shape parameters, s1
and s2
are scale parameters, and loc
is a location parameter.  Halfnormal distribution. Parameterizations include:
 Mathematica:
abs(Normal(0, sqrt(pi * 0.5) / invscale)))
, where invscale
is a parameter of the halfnormal distribution.  MATLAB:
abs(Normal(mu, sigma)))
, where mu
and sigma
are the underlying normal distribution's parameters.
 Hyperexponential distribution: See Mixtures of Distributions.
 Hypergeometric distribution: See Polya–Eggenberger Distribution.
 Hypoexponential distribution: See Transformations of Random Variates.
 Inverse chisquared distribution†:
df / (GammaDist(df * 0.5)*2)
, where df
is the number of degrees of freedom. The scale parameter (sigma
) is usually 1.0 / df
.  Inverse Gaussian distribution (Wald distribution): Generate
n = mu + (mu*mu*y/(2*lamda))  mu * sqrt(4 * mu * lamda * y + mu * mu * y * y) / (2 * lamda)
, where y = pow(Normal(0, 1), 2)
, then return n
with probability mu / (mu + n)
(for example, if RNDRANGEMinMaxExc(0, 1) <= mu / (mu + n)
), or mu * mu / n
otherwise. mu
is the mean and lamda
is the scale; both parameters are greater than 0. Based on method published in (Devroye 1986)[^19]. k
thorder statistic: BetaDist(k, n+1k)
. Returns the k
th smallest out of n
uniform random variates in [**0, 1). See also (Devroye 1986, p. 210)[^19].  Kumaraswamy distribution⬦:
pow(BetaDist(1, b), 1.0 / a)
, where a
and b
are shape parameters.  Landau distribution: See stable distribution.
 Lévy distribution†:
0.5 / GammaDist(0.5)
. The scale parameter (sigma
) is also called dispersion.  Logarithmic logistic distribution: See beta prime distribution.
 Logarithmic series distribution: Generate
n = NegativeBinomialInt(1, py  px, py)+1
(where px
/py
is a parameter in (0,1)), then return n
if ZeroOrOne(1, n) == 1
, or repeat this process otherwise (Flajolet et al., 2010)[^96]. The following is "exact" assuming computers can operate "exactly" on real numbers: floor(1.0  Expo(log1p(pow(1.0  p, RNDRANGEMinMaxExc(0, 1)))))
, where p
is the parameter in (0, 1); see (Devroye 1986)[^19].  Logistic distribution†:
(ln(x)log1p(x))
(logit function), where x
is RNDRANGEMinMaxExc(0, 1)
.  Logmultinormal distribution: See Multivariate Normal (Multinormal) Distribution.
 Maxofuniform distribution:
BetaDist(n, 1)
. Returns a number that simulates the largest out of n
uniform random variates in [**0, 1). See also (Devroye 1986, p. 675)[^19].  Maxwell distribution†:
sqrt(GammaDist(1.5)*2)
.  Minofuniform distribution:
BetaDist(1, n)
. Returns a number that simulates the smallest out of n
uniform random variates in [**0, 1). See also (Devroye 1986, p. 210)[^19].  Moyal distribution: See the Python sample code.
 Multinomial distribution: See Multinomial Distribution.
 Multivariate Poisson distribution: See the Python sample code.
 Multivariate tcopula: See the Python sample code.
 Multivariate tdistribution: See the Python sample code.
 Negative binomial distribution (
NegativeBinomial(successes, p)
): See Negative Binomial Distribution. The following is "exact" assuming computers can operate "exactly" on real numbers: Poisson(GammaDist(successes)*(1  p) / p)
(works even if successes
is not an integer).  Negative multinomial distribution: See the Python sample code.
 Noncentral beta distribution⬦:
BetaDist(a + Poisson(nc), b)
, where nc
(a noncentrality), a
, and b
are greater than 0.  Parabolic distribution⬦:
BetaDist(2, 2)
(Saucier 2000, p. 30).  Pascal distribution:
NegativeBinomial(successes, p) + successes
, where successes
and p
have the same meaning as in the negative binomial distribution, except successes
is always an integer.  Pearson VI distribution:
GammaDist(v) / GammaDist(w)
, where v
and w
are shape parameters greater than 0 (Saucier 2000, p. 33; there, an additional b
parameter is defined, but that parameter is canceled out in the source code).  Piecewise constant distribution: See Weighted Choice With Replacement.
 Piecewise linear distribution: See Piecewise Linear Distribution.
 Pólya–Aeppli distribution: See Transformations of Random Variates: Additional Examples.
 Power distribution:
BetaDist(alpha, 1) / b
, where alpha
is the shape and b
is the domain. Nominally in the interval (0, 1).  Power law distribution:
pow(RNDRANGEMinMaxExc(pow(mn,n+1),pow(mx,n+1)), 1.0 / (n+1))
, where n
is the exponent, mn
is the minimum, and mx
is the maximum. Reference.  Power lognormal distribution: See the Python sample code.
 Power normal distribution: See the Python sample code.
 Product copula: See Gaussian and Other Copulas.
 Rice distribution: See Multivariate Normal (Multinormal) Distribution.
 Rice–Norton distribution: See Multivariate Normal (Multinormal) Distribution.
 Singh–Maddala distribution: See beta prime distribution.
 sin^k distribution: Generate
x = BetaDist(k+1, k+1) * pi
, then return x
if 0Expo(k) <= ln(pi*pi*sin(x) / ((4*x*(pi  x)))
, or repeat this process otherwise (Makalic and Schmidt 2018)[^97].  Skellam distribution:
Poisson(mean1)  Poisson(mean2)
, where mean1
and mean2
are the means used in the Poisson
method.  Skew normal distribution† (Ghorbanzadeh et al. 2014)[^98]: Generate
c*max(a, b) + (1c)*min(a, b)
, where a = Normal(0, 1)
and independently, b = Normal(0, 1)
, and c = (1+th)/sqrt(2.0*(1+th))
, and th
is a real number in [0, 1]. Special cases: If th=0
, generate Normal(0, 1)
; if th=1
, generate max(a, b)
; if th=1
, generate min(a, b)
.  Snedecor's (Fisher's) Fdistribution:
GammaDist(m * 0.5)*n / (GammaDist(n * 0.5 + Poisson(sms * 0.5)) * m)
, where m
and n
are the numbers of degrees of freedom of two random variates with a chisquared distribution, and if sms
is other than 0, one of those distributions is noncentral with sum of mean squares equal to sms
.  Stable distribution: See Stable Distribution. Fourparameter stable distribution:
Stable(alpha, beta) * sigma + mu
, where mu
is the mean and sigma
is the scale; if alpha
and beta
are 1, the result is a Landau distribution. "Type 0" stable distribution: Stable(alpha, beta) * sigma + (mu  sigma * beta * x)
, where x
is ln(sigma)*2.0/pi
if alpha
is 1, and tan(pi*0.5*alpha)
otherwise.  Standard complex normal distribution: See Multivariate Normal (Multinormal) Distribution.
 Suzuki distribution: See Rayleigh distribution.
 Tukey lambda distribution:
(pow(x, lamda)pow(1.0x,lamda))/lamda
, where x
is RNDRANGEMinMaxExc(0, 1)
and lamda
is a shape parameter.  Twint distribution (Baker and Jackson 2018)[^99]: Generate
x
, a random Student's tdistributed number (not a noncentral one). Accept x
with probability z = pow((1 + y) / ((1 + y * y) + y), (df + 1) * 0.5)
(for example, if RNDRANGEMinMaxExc(0, 1) < z
), where y = x * x / df
and df
is the degrees of freedom used to generate the number; repeat this process otherwise.  von Mises distribution: See von Mises Distribution.
 Waring–Yule distribution: See beta negative binomial distribution.
 Wigner (semicircle) distribution†:
(BetaDist(1.5, 1.5)*21)
. The scale parameter (sigma
) is the semicircular radius.  Yule–Simon distribution: See beta negative binomial distribution.
 Zeta distribution: Generate
n = floor(pow(RNDRANGEMinMaxExc(0, 1), 1.0 / r))
, and if d / pow(2, r) < RNDRANGEMinMaxExc((d  1) * n / (pow(2, r)  1.0))
, where d = pow((1.0 / n) + 1, r)
, repeat this process. The parameter r
is greater than 0. Based on method described in (Devroye 1986)[^19]. A zeta distribution truncated by rejecting random values greater than some integer greater than 0 is called a Zipf distribution or Estoup distribution. (Devroye uses "Zipf distribution" to refer to the untruncated zeta distribution.)  Zipf distribution: See zeta distribution.
Geometric Sampling
Requires random real numbers.
This section contains ways to choose independent uniform random points in or on geometric shapes.
Random Points Inside a Simplex
The following pseudocode generates a random point inside an ndimensional simplex (simplest convex figure, such as a line segment, triangle, or tetrahedron). It takes one parameter, points, a list consisting of the n plus one vertices of the simplex, all of a single dimension n or greater. The special case of 3 points came from Osada et al. (2002)[^100].
METHOD VecAddProd(a, b, c)
for j in 0...size(a): a[j]=a[j]+b[j]*c
END METHOD
METHOD RandomPointInSimplex(points):
ret=NewList()
if size(points) > size(points[0])+1: return error
if size(points)==1 // Return a copy of the point
for i in 0...size(points[0]): AddItem(ret,points[0][i])
return ret
end
if size(points)==3
// Equivalent to sqrt(RNDRANGEMinMaxExc(0, 1))
rs=max(RNDRANGEMinMaxExc(0, 1), RNDRANGEMinMaxExc(0, 1))
r2=RNDRANGEMinMaxExc(0, 1)
ret=[0,0,0]
VecAddProd(ret,points[0],1.0rs)
VecAddProd(ret,points[1],(1.0r2)*rs)
VecAddProd(ret,points[2],r2*rs)
return ret
end
gammas=NewList()
// Sample from the simplex
for i in 0...size(points): AddItem(gammas, Expo(1))
tsum=0 // Will store sum of all gammas
for i in 0...size(gammas): tsum=tsum+gammas[i]
for i in 0...size(gammas): gammas[i] = gammas[i] / tsum
gammas[size(gammas)1]=0 // To omit last gamma in sum
tot = 1.0 // Will store 1 minus the sum of all gammas
for i in 0...size(gammas): tot=tot  gammas[i]
// Build the final point
for i in 0...size(points[0]): AddItem(ret, points[0][i]*tot)
for i in 1...size(points): VecAddProd(
ret, points[i], gammas[i1])
return ret
END METHOD
Random Points on a Sphere
The following pseudocode shows how to generate a random point on a sphere (surface of a ball) centered at the origin, with the following parameters:
dims
, the number of dimensions of the sphere (and of the random point). radius
, the sphere's radius (if radius
is 1, the result can also serve as a unit vector in dims
dimensional space). p
is greater than 0, or is infinity, and describes the sphere's shape (if p
is 2, the sphere is the usual one).
See Schechtmann and Zinn (1990)[^101]. Here, EPD generates an exponential power random variate (Devroye 1986, pp. 174175)[^19].
METHOD PNorm(vec, p)
ret=0
if p==infinity
for i in 0...size(vec): ret=max(ret,abs(vec[i]))
return ret
else
for i in 0...size(vec): ret=ret+pow(abs(vec[i]),p)
return pow(ret,1.0/p)
end
END METHOD
METHOD EPD(p)
# Infinity case is uniform in (1,1) to be
# appropriate for this section's purposes
if p==infinity: return RNDRANGEMinMaxExc(1,1)
if p==2: return Normal(0,1)
return (RNDINT(1) * 2  1)*pow(GammaDist(1/p),1/p)
END METHOD
METHOD RandomPointOnSphere(dims, radius, p)
x=0
while x==0
ret=[]
for i in 0...dims: AddItem(ret, EPD(p))
x=PNorm(ret, p)
end
invnorm=radius/x
for i in 0...dims: ret[i]=ret[i]*invnorm
return ret
END METHOD
Notes:
PNorm(vec, p)
, also known as ℓ_{p} norm, is a generalized notion of distance. PNorm(vec, 2)
is the "usual" distance and, for instance, forms the "usual" versions of spheres. p
can be any number 0 or greater, or can be infinity.  The Python sample code contains an optimized method for points on a circle (2dimensional sphere,
p=2
).
Example: To generate a random point on the surface of a cylinder running along the Z axis, generate random X and Y coordinates on a circle and generate a random Z coordinate by RNDRANGEMinMaxExc(mn, mx)
, where mn
and mx
are the highest and lowest Z coordinates possible.
Random Points Inside a Box, Ball, Shell, or Cone
To generate a random point inside—
 an Ndimensional box, generate
RNDRANGEMinMaxExc(mn, mx)
for each coordinate, where mn
and mx
are the lower and upper bounds for that coordinate. For example—
 to generate a random point inside a rectangle bounded in [0, 2) along the X axis and [3, 6) along the Y axis, generate
[RNDRANGEMinMaxExc(0,2), RNDRANGEMinMaxExc(3,6)]
, and  to generate a complex number with real and imaginary parts bounded in [0, 1], generate
[RNDRANGEMinMaxExc(0, 1), RNDRANGEMinMaxExc(0, 1)]
.
 an Ndimensional ball, centered at the origin, with a given radius, follow the pseudocode in
RandomPointOnSphere
, except replace PNorm(ret, p)
with pow(pow(PNorm(ret, p),p)+Expo(1),1.0/p)
(Barthe et al. 2005)[^102]. [^103]  an Ndimensional spherical shell (a hollow ball), centered at the origin, with inner radius A and outer radius B (where A is less than B), generate a random point on the surface of an Ndimensional ball with radius equal to
pow(RNDRANGEMinMaxExc(pow(A, N), pow(B, N)), 1.0 / N)
[^104].  a cone with height
H
and radius R
at its base, running along the Z axis, generate a random Z coordinate by Z = max(max(RNDRANGEMinMaxExc(0, H), RNDRANGEMinMaxExc(0, H)), RNDRANGEMinMaxExc(0, H))
, then generate random X and Y coordinates inside a disc (2dimensional ball) with radius equal to max(RNDRANGEMinMaxExc(0,Z*(R/H)), RNDRANGEMinMaxExc(0,Z*(R/H)))
[^105].
Example: To generate a random point inside a cylinder running along the Z axis, generate random X and Y coordinates inside a disc (2dimensional ball) and generate a random Z coordinate by RNDRANGEMinMaxExc(mn, mx)
, where mn
and mx
are the highest and lowest Z coordinates possible.
Notes:
 The Python sample code contains a method for generating a random point on the surface of an ellipsoid modeling the Earth.
 Sampling a halfball, halfsphere, or halfshell can be done by sampling a full ball or shell and replacing one of the dimensions of the result with its absolute value.
 Lacko and Harman (2012)[^106] defined a family of nonuniform distributions of points inside a ball: generate
RandomPointOnSphere(dims, r*pow(BetaDist(dims/p, d/p), 1.0/p),p)
where r>0
is the radius, dims
and p
are as in RandomPointOnSphere
, and d>=0
is a shape parameter. If d = p
, the distribution is uniform in the ball.
Random Latitude and Longitude
To generate a random point on the surface of a sphere in the form of a latitude and longitude (in radians with west and south coordinates negative)[^107]—
 generate the longitude
RNDRANGEMinMaxExc(pi, pi)
, where the longitude is in the interval [π, π), and  generate the latitude
atan2(sqrt(1  x * x), x)  pi / 2
, where x = RNDRANGEMinMaxExc(1, 1)
and the latitude is in the interval [π/2, π/2] (the interval excludes the poles, which have many equivalent forms; if poles are not desired, generate x
until neither 1 nor 1 is generated this way).
Acknowledgments
I acknowledge the commenters to the CodeProject version of this page, including George Swan, who referred me to the reservoir sampling method.
I also acknowledge Christoph Conrads, who gave suggestions in parts of this article.
Other Documents
The following are some additional articles I have written on the topic of randomization and pseudorandom variate generation. All of them are opensource.
Notes
[^1]: Pedersen, K., "Reconditioning your quantile function", arXiv:1704.07949v3 [stat.CO], 2018.
[^2]: For an exercise solved by part of the RNDINT
pseudocode, see A. Koenig and B. E. Moo, Accelerated C++, 2000; see also a blog post by Johnny Chan.
[^3]: An example of such a source is a Gaussian noise generator. This kind of source is often called an entropy source.
[^4]: D. Lemire, "A fast alternative to the modulo reduction", Daniel Lemire's blog, 2016.
[^5]: Lemire, D., "Fast Random Integer Generation in an Interval", arXiv:1805.10941v4 [cs.DS], 2018.
[^6]: Lumbroso, J., "Optimal Discrete Uniform Generation from Coin Flips, and Applications", arXiv:1304.1916 [cs.DS]
[^7]: "Probability and Random Numbers", Feb. 29, 2004.
[^8]: Mennucci, A.C.G., "Bit Recycling for Scaling Random Number Generators", arXiv:1012.4290 [cs.IT], 2018.
[^9]: Knuth, Donald E. and Andrew ChiChih Yao. "The complexity of nonuniform random number generation", in Algorithms and Complexity: New Directions and Recent Results, 1976.
[^10]: This is because the binary entropy of p = 1/n
is p * log2(1/p) = log2(n) / n
, and the sum of n
binary entropies (for n
outcomes with probability 1/n
each) is log2(n) = ln(n)/ln(2)
.
[^11]: Devroye, L., Gravel, C., "Random variate generation using only finitely many unbiased, independently and identically distributed random bits", arXiv:1502.02539v6 [cs.IT], 2020.
[^12]: A naïve RNDINTEXC
implementation often seen in certain languages like JavaScript is the idiom floor(Math.random() * maxExclusive)
, where Math.random()
is any method that outputs a floatingpoint number that behaves like an independent uniform random variate in the interval [0, 1). However, no implementation of Math.random()
can choose from all real numbers in [0, 1), so this idiom can bias some results over others depending on the value of maxExclusive
. For example, if Math.random()
is implemented as RNDINT(X  1)/X
and X
is not divisible by maxExclusive
, the result will be biased. Also, an implementation might preround Math.random() * maxExclusive
(before the floor
) to the closest number it can represent; in rare cases, that might be maxExclusive
for certain rounding modes. If an application is concerned about these issues, it should treat the Math.random()
implementation as simulating the "source of random numbers" for RNDINT
and implement RNDINTEXC
through RNDINT
instead.
[^13]: The user "BVtp" from the Stack Overflow community led me to this insight.
[^14]: Daniel Ting, "Simple, Optimal Algorithms for Random Sampling Without Replacement", arXiv:2104.05091, 2021.
[^15]: Sanders, P., Lamm, S., et al., "Efficient Parallel Random Sampling – Vectorized, CacheEfficient, and Online", arXiv:1610.0514v2 [cs.DS], 2019.
[^16]: Jeff Atwood, "The danger of naïveté", Dec. 7, 2007.
[^17]: Bacher, A., Bodini, O., et al., "MergeShuffle: A Very Fast, Parallel Random Permutation Algorithm", arXiv:1508.03167 [cs.DS], 2015.
[^18]: Merlini, D., Sprugnoli, R., Verri, M.C., "An Analysis of a Simple Algorithm for Random Derangements", 2007.
[^19]: Devroye, L., NonUniform Random Variate Generation, 1986.
[^20]: See also the Stack Overflow question "Random index of a non zero value in a numpy array".
[^21]: S. Linderman, "A Parallel Gamma Sampling Implementation", Laboratory for Independent Probabilistic Systems Blog, Feb. 21, 2013, illustrates one example, a GPUimplemented sampler of gammadistributed random variates.
[^22]: De Bruyne, B., et al., "Generating discretetime constrained random walks and Lévy flights, arXiv:2104.06145 (2021).
[^23]: Brownlee, J. "A Gentle Introduction to the Bootstrap Method", Machine Learning Mastery, May 25, 2018.
[^24]: Propp, J.G., Wilson, D.B., "Exact sampling with coupled Markov chains and applications to statistical mechanics", 1996.
[^25]: Fill, J.A., "An interruptible algorithm for perfect sampling via Markov chains", Annals of Applied Probability 8(1), 1998.
[^26]: E. N. Gilbert, "Random Graphs", Annals of Mathematical Statistics 30(4), 1959.
[^27]: V. Batagelj and U. Brandes, "Efficient generation of large random networks", Phys.Rev. E 71:036113, 2005.
[^28]: Costantini, Lucia. "Algorithms for sampling spanning trees uniformly at random." Master's thesis, Universitat Politècnica de Catalunya, 2020. https://upcommons.upc.edu/bitstream/handle/2117/328169/memoria.pdf
[^29]: Penschuck, M., et al., "Recent Advances in Scalable Network Generation", arXiv:2003.00736v1 [cs.DS], 2020.
[^30]: Jon Louis Bentley and James B. Saxe, "Generating Sorted Lists of Random Numbers", ACM Trans. Math. Softw. 6 (1980), pp. 359364, describes a way to generate certain kinds of random variates in sorted order, but it's not given here because it relies on generating real numbers in the interval [0, 1], which is inherently imperfect because computers can't choose among all real numbers between 0 and 1, and there are infinitely many of them.
[^31]: (2020a) Saad, F.A., Freer C.E., et al., "The Fast Loaded Dice Roller: A NearOptimal Exact Sampler for Discrete Probability Distributions", arXiv:2003.03830v2 [stat.CO], also in AISTATS 2020: Proceedings of the 23rd International Conference on Artificial Intelligence and Statistics, Proceedings of Machine Learning Research 108, Palermo, Sicily, Italy, 2020.
[^32]: Feras A. Saad, Cameron E. Freer, Martin C. Rinard, and Vikash K. Mansinghka, "Optimal Approximate Sampling From Discrete Probability Distributions", arXiv:2001.04555v1 [cs.DS], also in Proc. ACM Program. Lang. 4, POPL, Article 36 (January 2020), 33 pages.
[^33]: Shaddin Dughmi, Jason D. Hartline, Robert Kleinberg, and Rad Niazadeh. 2017. Bernoulli Factories and BlackBox Reductions in Mechanism Design. In Proceedings of 49th Annual ACM SIGACT Symposium on the Theory of Computing, Montreal, Canada, June 2017 (STOC’17).
[^34]: K. Bringmann and K. Panagiotou, "Efficient Sampling Methods for Discrete Distributions." Algorithmica 79 (2007), also in Proc. 39th International Colloquium on Automata, Languages, and Programming (ICALP'12), 2012.
[^35]: A.J. Walker, "An efficient method for generating discrete random variables with general distributions", ACM Transactions on Mathematical Software 3, 1977.
[^36]: Vose, Michael D. "A linear algorithm for generating random numbers with a given distribution." IEEE Transactions on software engineering 17, no. 9 (1991): 972975.
[^37]: Klundert, B. van de, "Efficient Generation of Discrete Random Variates", Faculty of Science Theses, Universiteit Utrecht, 2019.
[^38]: K. Bringmann and K. G. Larsen, "Succinct Sampling from Discrete Distributions", In: Proc. 45th Annual ACM Symposium on Theory of Computing (STOC'13), 2013.
[^39]: L. HübschleSchneider and P. Sanders, "Parallel Weighted Random Sampling", arXiv:1903.00227v2 [cs.DS], 2019.
[^40]: Y. Tang, "An Empirical Study of Random Sampling Methods for Changing Discrete Distributions", Master's thesis, University of Alberta, 2019.
[^41]: T. S. Han and M. Hoshi, "Interval algorithm for random number generation", IEEE Transactions on Information Theory 43(2), March 1997.
[^42]: Efraimidis, P. "Weighted Random Sampling over Data Streams", arXiv:1012.0256v2 [cs.DS], 2015.
[^43]: Efraimidis, P. and Spirakis, P. "Weighted Random Sampling (2005; Efraimidis, Spirakis)", 2005.
[^44]: von Neumann, J., "Various techniques used in connection with random digits", 1951.
[^45]: Deville, J.C. and Tillé, Y. Unequal probability sampling without replacement through a splitting method. Biometrika 85 (1998).
[^46]: Chao, MT., "A general purpose unequal probability sampling plan", Biometrika 69 (1982).
[^47]: The Python sample code includes a ConvexPolygonSampler
class that implements this kind of sampling for convex polygons; unlike other polygons, convex polygons are trivial to decompose into triangles.
[^48]: That article also mentions a criticalhit distribution, which is actually a mixture of two distributions: one roll of dice and the sum of two rolls of dice.
[^49]: An affine transformation is one that keeps straight lines straight and parallel lines parallel.
[^50]: FarachColton, M. and Tsai, M.T., 2015. Exact sublinear binomial sampling. Algorithmica 73(4), pp. 637651.
[^51]: K. Bringmann, F. Kuhn, et al., “Internal DLA: Efficient Simulation of a Physical Growth Model.” In: Proc. 41st International Colloquium on Automata, Languages, and Programming (ICALP'14), 2014.
[^52]: Heaukulani, C., Roy, D.M., "Blackbox constructions for exchangeable sequences of random multisets", arXiv:1908.06349v1 [math.PR], 2019. Note however that this reference defines a negative binomial distribution as the number of successes before N failures (not vice versa).
[^53]: Bringmann, K., and Friedrich, T., 2013, July. Exact and efficient generation of geometric random variates and random graphs, in International Colloquium on Automata, Languages, and Programming (pp. 267278).
[^54]: Duchon, P., Duvignau, D., "Preserving the number of cycles of length k in a growing uniform permutation", Electronic Journal of Combinatorics 23(4), 2016.
[^55]: Johnson and Kotz, "Discrete Distributions", 1969.
[^56]: Smith, Noah A., and Roy W. Tromble. "Sampling uniformly from the unit simplex." Johns Hopkins University, Tech. Rep 29 (2004).
[^57]: Durfee, et al., "l1 Regression using Lewis Weights Preconditioning and Stochastic Gradient Descent", Proceedings of Machine Learning Research 75(1), 2018.
[^58]: The NVIDIA white paper "Floating Point and IEEE 754 Compliance for NVIDIA GPUs", and "FloatingPoint Determinism" by Bruce Dawson, discuss issues with floatingpoint numbers in much more detail.
[^59]: "Uniform" in quotes means, as close to the uniform distribution as possible for the number format. Both bounds are excluded because mathematically, any specific real number from the uniform distribution occurs with probability 0.
[^60]: Boehm, HansJ. "Towards an API for the real numbers." In Proceedings of the 41st ACM SIGPLAN Conference on Programming Language Design and Implementation, pp. 562576. 2020.
[^61]: This includes integers if e
is limited to 0, and fixedpoint numbers if e
is limited to a single exponent less than 0.
[^62]: Downey, A. B. "Generating Pseudorandom Floating Point Values", 2007.
[^63]: Ideally, X
is the highest integer p
such that all multiples of 1/p
in the interval [0, 1] are representable in the number format in question. For example, X
is 2^53 (9007199254740992) for binary64, and 2^24 (16777216) for binary32.
[^64]: Goualard F. (2020) Generating Random FloatingPoint Numbers by Dividing Integers: A Case Study. In: Krzhizhanovskaya V. et al. (eds) Computational Science – ICCS 2020. ICCS 2020. Lecture Notes in Computer Science, vol 12138. Springer, Cham. https://doi.org/10.1007/9783030504175_2
[^65]: Monahan, J.F., "Accuracy in Random Number Generation", Mathematics of Computation 45(172), 1985.
[^66]: Halmos, P.R., "The theory of unbiased estimation", Annals of Mathematical Statistics 17(1), 1946.
[^67]: Spall, J.C., "An Overview of the Simultaneous Perturbation Method for Efficient Optimization", Johns Hopkins APL Technical Digest 19(4), 1998, pp. 482492.
[^68]: Owen, Art B. "On dropping the first Sobol’point." In International Conference on Monte Carlo and QuasiMonte Carlo Methods in Scientific Computing, pp. 7186. Springer, Cham, 2022. "Preprint": arXiv:2008.08051.
[^69]: P. L'Ecuyer, "Tables of Linear Congruential Generators of Different Sizes and Good Lattice Structure", Mathematics of Computation 68(225), January 1999, with errata.
[^70]: Harase, S., "A table of shortperiod Tausworthe generators for Markov chain quasiMonte Carlo", arXiv:2002.09006 [math.NA], 2020.
[^71]: Kamath, Chandrika. "Intelligent sampling for surrogate modeling, hyperparameter optimization, and data analysis." Machine Learning with Applications (2022): 100373, https://doi.org/10.1016/j.mlwa.2022.100373.
[^72]: D. Revuz, M. Yor, "Continuous Martingales and Brownian Motion", 1999.
[^73]: Lewis, P.W., Shedler, G.S., "Simulation of nonhomogeneous Poisson processes by thinning", Naval Research Logistics Quarterly 26(3), 1979.
[^74]: Saucier, R. "Computer Generation of Statistical Distributions", March 2000.
[^75]: Other references on density estimation include a Wikipedia article on multiplevariable kernel density estimation, and a blog post by M. Kay.
[^76]: "Jitter", as used in this step, follows a distribution formally called a kernel, of which the normal distribution is one example. Bandwidth should be set so that the estimated distribution fits the data and remains smooth. A more complex kind of "jitter" (for multicomponent data points) consists of a point generated from a multinormal distribution with all the means equal to 0 and a covariance matrix that, in this context, serves as a bandwidth matrix. "Jitter" and bandwidth are not further discussed in this document.
[^77]: A discrete distribution is a distribution that associates a countable number of items with a separate probability per item. These items are usually integers, but they need not be. For example, the items can be noninteger values (for example, x/y
with probability x/(1+y)
) as long as the values can be converted to and from integers. Two examples:  A rational number in lowest terms can be converted to an integer by interleaving the bits of the numerator and denominator.  Integerquantized numbers (popular in "deeplearning" neural networks) take a relatively small number of bits (usually 8 bits or even smaller). An 8bit quantized number format is effectively a "lookup table" that maps 256 integers to real numbers.
[^78]: This includes integers if FPExponent
is limited to 0, and fixedpoint numbers if FPExponent
is limited to a single exponent less than 0.
[^79]: Saad, F.A., et al., "Optimal Approximate Sampling from Discrete Probability Distributions", arXiv:2001.04555 [cs.DS], 2020. See also the associated source code.
[^80]: Walter, M., "Sampling the Integers with Low Relative Error", in International Conference on Cryptology in Africa, Jul. 2019, pp. 157180.
[^81]: Gerhard Derflinger, Wolfgang Hörmann, and Josef Leydold, "Random variate generation by numerical inversion when only the density is known", ACM Transactions on Modeling and Computer Simulation 20(4) article 18, October 2010.
[^82]: Part of numbers_from_u01
uses algorithms described in Arnas, D., Leake, C., Mortari, D., "Random Sampling using kvector", Computing in Science & Engineering 21(1) pp. 94107, 2019, and Mortari, D., Neta, B., "kVector Range Searching Techniques".
[^83]: Devroye, L., "NonUniform Random Variate Generation". In Handbooks in Operations Research and Management Science: Simulation, Henderson, S.G., Nelson, B.L. (eds.), 2006, p.83.
[^84]: Sainudiin, Raazesh, and Thomas L. York. "An AutoValidating, TransDimensional, Universal Rejection Sampler for Locally Lipschitz Arithmetical Expressions," Reliable Computing 18 (2013): 1554.
[^85]: Many Markov chains converge to a stationary distribution. The chain's mixing time is how fast this happens; it's the number of steps after which the next draw will follow a distribution within ε of the stationary distribution. This approximate distribution is then sampled by initializing several Markov chains (independently at random), then running each of them for their mixing time ("burnin"), then taking the next draw of each chain. For further information see Levin and Peres, Markov chains and mixing times, second edition, 2017.
[^86]: Tran, K.H., "A Common Derivation for Markov Chain Monte Carlo Algorithms with Tractable and Intractable Targets", arXiv:1607.01985v5 [stat.CO], 2018, gives a common framework for describing many MCMC algorithms, including Metropolis–Hastings, slice sampling, and Gibbs sampling.
[^87]: Kschischang, Frank R. "A TrapezoidZiggurat Algorithm for Generating Gaussian Pseudorandom Variates." (2019).
[^88]: Devroye, L., 1996, December, "Random variate generation in one line of code" In Proceedings Winter Simulation Conference (pp. 265272). IEEE.
[^89]: Crooks, G.E., Field Guide to Continuous Probability Distributions, 2019.
[^90]: McGrath, E.J., Irving, D.C., "Techniques for Efficient Monte Carlo Simulation, Volume II", Oak Ridge National Laboratory, April 1975.
[^91]: Crooks, G.E., "The Amoroso Distribution", arXiv:1005.3274v2 [math.ST], 2015.
[^92]: Kotz, Samuel, Tomasz Kozubowski, and Krzystof Podgorski. The Laplace distribution and generalizations: a revisit with applications to communications, economics, engineering, and finance. Springer Science & Business Media, 2012.
[^93]: Devroye, L., "Expected Time Analysis of a Simple Recursive Poisson Random Variate Generator", Computing 46, pp. 165173, 1991.
[^94]: Bailey, R.W., "Polar generation of random variates with the t distribution", Mathematics of Computation 62 (1994).
[^95]: Stein, W.E. and Keblis, M.F., "A new method to simulate the triangular distribution", Mathematical and Computer Modelling 49(56), 2009, pp.11431147.
[^96]: Flajolet, P., Pelletier, M., Soria, M., "On Buffon machines and numbers", arXiv:0906.5560v2 [math.PR], 2010.
[^97]: Makalic, E., Schmidt, D.F., "An efficient algorithm for sampling from sin^k(x) for generating random correlation matrices", arXiv:1809.05212v2 [stat.CO], 2018.
[^98]: Ghorbanzadeh, D., Jaupi, L., Durand, P., "A Method to Simulate the Skew Normal Distribution", Applied Mathematics 5(13), 2014.
[^99]: Baker, R., Jackson, D., "A new distribution for robust least squares", arXiv:1408.3237 [stat.ME], 2018.
[^100]: Osada, R., Funkhouser, T., et al., "Shape Distributions", _ACM Transactions on Graphics 21(4), Oct. 2002.
[^101]: Schechtman, G., Zinn, J., On the volume of intersection of two Lp^n balls. 1990.
[^102]: Barthe, F., Guédon, O., et al., "A probabilistic approach to the geometry of the lP^Nball", Annals of Probability 33(2), 2005.
[^103]: Alternatively, if p
is an integer greater than 0, generate a random point on the surface of an ball with N+p
dimensions and the given radius (for example, using RandomPointOnSphere(N+p,radius,p)
), then discard the last p
coordinates of that point (Corollary 1 of Lacko, V., & Harman, R. (2012). A conditional distribution approach to uniform sampling on spheres and balls in Lp spaces. Metrika, 75(7), 939951).
[^104]: See the Mathematics Stack Exchange question titled "Random multivariate in hyperannulus", questions/1885630
.
[^105]: See the Stack Overflow question "Uniform sampling (by volume) within a cone", questions/41749411
. Square and cube roots replaced with maximums.
[^106]: Lacko, V., & Harman, R. (2012). A conditional distribution approach to uniform sampling on spheres and balls in Lp spaces. Metrika, 75(7), 939951.
[^107]: Reference: "Sphere Point Picking" in MathWorld (replacing inverse cosine with atan2
equivalent).
[^108]: In the privacy context, see, for example, Awan, J. and Rao, V., 2021. "PrivacyAware Rejection Sampling", arXiv:2108.00965.
[^109]: For example, see Balcer, V., Vadhan, S., "Differential Privacy on Finite Computers", Dec. 4, 2018; as well as Micciancio, D. and Walter, M., "Gaussian sampling over the integers: Efficient, generic, constanttime", in Annual International Cryptology Conference, August 2017 (pp. 455485).
Appendix
Sources of Random Numbers
All the randomization methods presented on this page assume that we have an endless source of numbers such that—
 the numbers follow a uniform distribution, and
 each number is chosen independently of any other choice.
That is, the methods assume we have a "source of (uniform) random numbers". (Thus, none of these methods generate random numbers themselves, strictly speaking, but rather, they assume we have a source of them already.)
However, this is an ideal assumption which is hard if not impossible to achieve in practice.
Indeed, most applications make use of pseudorandom number generators (PRNGs), which are algorithms that produce randombehaving numbers, that is, numbers that simulate the ideal "source of random numbers" mentioned above. As a result, the performance and quality of the methods on this page will depend in practice on the quality of the PRNG (or other generator of randombehaving numbers) even if they don't in theory.
The "source of random numbers" can be simulated by a wide range of devices and programs, including PRNGs, socalled "true random number generators", and application programming interfaces (APIs) that provide uniform randombehaving numbers to applications. An application ought to choose devices or programs that simulate the "source of random numbers" well enough for its purposes, including in terms of their statistical quality, "unguessability", or both. However, it is outside this document's scope to give further advice on this choice.
The randomization methods in this document are deterministic (that is, they produce the same values given the same state and input), regardless of what simulates the "source of random numbers" (such as a PRNG or a "true random number generator"). The exceptions are as follows:
 The methods do not "know" what numbers will be produced next by the "source of random numbers" (or by whatever is simulating that source).
 A few methods read lines from files of unknown size; they won't "know" the contents of those lines before reading them.
Implementation Considerations
 Shell scripts and Microsoft Windows batch files are designed for running other programs, rather than generalpurpose programming. However, batch files and
bash
(a shell script interpreter) might support a variable which returns a uniformly distributed "random" integer in the interval [0, 32767] (called %RANDOM%
or $RANDOM
, respectively); neither variable is designed for information security. Whenever possible, the methods in this document should not be implemented in shell scripts or batch files, especially if information security is a goal.  Query languages such as SQL have no procedural elements such as loops and branches. Moreover, standard SQL has no way to choose a number at random, but popular SQL dialects often do — with idiosyncratic behavior — and describing differences between SQL dialects is outside the scope of this document. Whenever possible, the methods in this document should not be implemented in SQL, especially if information security is a goal.
 Stateless PRNGs. Most designs of pseudorandom number generators (PRNGs) in common use maintain an internal state and update that state each time they generate a pseudorandom number. But for stateless PRNG designs (including socalled "splittable" PRNGs),
RNDINT()
, NEXTRAND()
, and other random sampling methods in this document may have to be adjusted accordingly (usually by adding an additional parameter).  Multithreading. Multithreading can serve as a fast way to generate multiple random variates at once; it is not reflected in the pseudocode given in this page. In general, this involves dividing a block of memory into chunks, assigning each chunk to a thread, giving each thread its own instance of a pseudorandom number generator (or another program that simulates a "source of random numbers"), and letting each thread fill its assigned chunk with random variates. For an example, see "Multithreaded Generation".
 Fixed amount of "randomness". Given a kbit integer n (which lies in the interval [0, 2^{k}) and is chosen uniformly at random), values that approximate a probability distribution (for example,
Poisson
, Normal
) can be generated with the integer n either by finding the quantile for (n+1)/2^{k+2} or by using n to help initialize a local PRNG and using the PRNG to generate a sample from that distribution. An application should use this suggestion only if it wants to ensure a fixed amount of "randomness" per sampled outcome is ultimately drawn, because the sampling method can return one of only 2^{k} different outcomes this way. (In general, n can't be chosen uniformly at random with a fixed number of randomly chosen bits, unless the number of different outcomes for n is a power of 2.)
Security Considerations
If an application samples at random for information security purposes, such as to generate passwords or encryption keys at random, the following applies:
 "Cryptographic generators". The application has to use a device or program that generates randombehaving numbers that are hard to guess for information security purposes (a socalled "cryptographic generator"). Choosing such a device or program is outside the scope of this document.
 Timing attacks. Certain security and privacy attacks have exploited timing and other differences to recover cleartext, encryption keys, or other secret or private data. Thus, security algorithms have been developed to have no timing differences, including memory access patterns, that reveal anything about any secret or private inputs, such as keys, passwords, or "seeds" for pseudorandom number generators. (Such algorithms include socalled "constanttime" algorithms.) But even if an algorithm has variable running time (for example, rejection sampling), it may or may not have securityrelevant timing differences, especially if it does not reuse secrets[^108].
 Security algorithms out of scope. Security algorithms that take random secrets to generate random security parameters, such as encryption keys, public/private key pairs, elliptic curves, or points on an elliptic curve, are outside this document's scope.
 Floatingpoint numbers. Numbers chosen at random for security purposes are almost always integers (and, in very rare cases, fixedpoint numbers). Even in the few security applications where those numbers are floatingpoint numbers (notably differential privacy and latticebased cryptography), there are ways to avoid such floatingpoint numbers[^109].
This member has not yet provided a Biography. Assume it's interesting and varied, and probably something to do with programming.