Click here to Skip to main content
15,113,726 members
Articles / Programming Languages / Visual Basic
Posted 18 Jan 2010

Tagged as


16 bookmarked

Parallel Processing MS Access VBA Application

Rate me:
Please Sign up or sign in to vote.
4.50/5 (4 votes)
29 Jan 2010CPOL9 min read
Adding paralell processing capability to MS Access VBA code.


I got a challenging assignment to provide alarm capability on top of an existing application, written in VBA Access. This required a few issues to be dealt with and resolved. I will, in this article, describe the steps I took to provide parallel processing, i.e., alarm capabilities to an existing MS Access application.

Accompanying Code

The accompanying code is an MS Access application written in MS Office 2007, and saved as a .mdb so it can be accessed from within MS Access 2003. The C# code is written in the beta version of VS 2010.

Assumption about the Reader

I assume that your experience is more extensive in the VBA side than on C# side.

Issues to Resolve

The issues for providing parallel processing to VBA code stems from the fact that MS Office does not support concurrency. As such, we will need to provide:

  • A mechanism that will monitor key events in order to trigger the parallel process (the secondary process).
  • The parallel process itself (the secondary process) needs to be capable of being interrupted.
  • The existing system (the primary VBA driven system) should not experience noticeable degradation in performance when the secondary, parallel, process is introduced.

A Bad Solution (that does not work)

At first glance, one might be tempted to create a hidden form, and set its timer function to provide the needed parallel processing. This will not work if the hidden form performs a long running process, as MS Access is a singly processing environment, and having this hidden form threading through a long-running Sub/Function will prevent other Subs/Functions from running.

We can resort to the DoEvents function in order to yield and allow MS Access to pay attention to some other Sub/Function. However, I feel that this is a really bad idea, a really-really bad idea. By resorting to the DoEvents function to achieve parallelism, we commit to using the DoEvents function in all lengthy Subs/Functions, in the primary or secondary parallel process. This practice is impractical, a maintenance nightmare, and worst of all, it potentially compromises integrity. This is not the main point of the article, so I will not elaborate. For the interested reader, read the paragraph under Caution in

Solution in the Theoretical Realm

  • We will create a hidden form that will monitor the event(s) that will trigger the parallel, long running process.
  • We will create a .NET DLL that will encapsulate the long running process, a process that is interruptible.
  • The existing VBA application's processing will not be noticeably degraded if the hidden form's timer process is short running and is running infrequently.

In a nutshell, this is the solution. Let's move from the theoretical realm to the practical realm.

Mapping the Issues to the Alarm Solution

We will create a hidden form with an OnTimer function that will monitor a specific table. The OnTimer will run infrequently, like every 15 seconds, and when monitoring a special table, it will do as little work as possible as to not disturb the rest of the VBA application.

The .NET DLL will be attached statically to the VBA solution (discussed in the section "Running on a different machine"), and as such, it is available at the beckon call of the VBA code.

The construction of the DLL is not difficult. Also, letting the client machine know of the DLL that is to be visible to the VBA code in MS Access is not too difficult.

We are now home free.

Writing the C# Alarm DLL

.NET allows us to write a DLL that will be COM visible; MS Office applications interact with COM classes, not .NET classes. In order to compile the project and have the COM Visible bit set, we need to run VS as an Administrator on Windows Vista and Windows 7 in addition to logging in with an Administrator account (Windows XP requires only that you log in as an Administrator). For that purpose, right-click on the VS icon or VS menu item, and select the "Run as administrator" option off the right-click driven menu.

Image 1

Creating the Alarm DLL

Fire up VS (I am using VS2010 beta version), and then choose the Class Library template.

Now, we need an interface that will become the COM interface. For that purpose, you will need to include a "using" construct:

using System.Runtime.InteropServices;

Your interface should look something like this:

public interface IAlarm
    void PlaySound();
    void PlayStop();

The interface exposes two functions: "PlaySound" and "PlayStop". The second name seems strange: "PlayStop". Are you kidding me? Originally, I wanted to call the two functions "Play" and "Stop". Alas, VB has a construct "Stop" that trumps an external "Stop" function. Hence: "PlaySound" and "PlayStop".

Sound Effects

An alarm needs to blare some sort of a sound. Some sites will provide charge-free MP3, wav, etc., sound files. For my real life app, I recommended a screaming girl's sound, which was swiftly rejected. So I will provide this sound effect in this example. Neither my wife nor my dog liked the sound, which means that if you dislike the alarm sound badly enough, then you will attend to whatever needs attending faster. I downloaded the free of charge screaming girl sound off the following site: PDsoundfx/PDsoundfx_sounds/screams_sounds/screams_scream_wav.shtml and embedded the sound in the Resources section of the project-properties.

Image 2

The Alarm Class

The Alarm class itself is uneventful. It inherits from the previously created IAlarm interface, which ensures that it implements the PlaySound() and PlayStop() functions. It has a member SoundPlayer private variable called _player:

private SoundPlayer _player;

SoundPlayer is a class that is part of the System.Media namespace, that can play Wav files. Therefore, if the sound file that you downloaded is not a Wav file, then you will need to convert it to a Wav file. There is a multitude of free sound converter options available to you. You may checkout CDex on, or the AVC converter on, and much more.

A word of caution: if you would like to have multiple sound files string together in a sequence to be heard sequentially, my humble advice is that you string them together outside the Alarm program in a single Wav file, as opposed to having the Alarm program play them in a train of Wav sound clips.

The constructor of Alarm consists of:

// Initialize the _player
_player = new SoundPlayer();

// Set the _player stream location
_player.Stream = Resources.Alarm;

// Load the _player

The AlarmCS class implements the PlaySound() and PlayStop() functions:

public void PlaySound()

public void PlayStop()

The _player.PlayLooping(), when called, will run continually in a loop. This is the long running function for which .NEt was so badly needed.

Lastly, the AlarmCS is decorated as so:


Compile, and we are done!!!

Signing the Application

In order to run in a different machine, it is best that the DLL be signed. My recommendation is that your company employs a single key identifying itself. However, for development, you may employ a different key. You will find the signing capabilities in the signing portion of the project-properties:

Image 3

Running on a Different Machine

Running on the same machine that you compiled on is a no brainer. VS registers the COM classes for you. However, what about running the DLL you created on a different machine?

The COM DLL needs to be registered. COM registration means that the DLL needs to be represented in the system registry. Thereafter, the DLL is visible globally to the entire system. For more information about the representation in the Registry, see:

In a cmd window that you start using "Running as administrator", we will issue the following command:

regasm AlarmCS.DLL /codebase /tlb:AlarmCS.TLB 

on the target machine (that has .NET installed but no VS installed). So, for example, regasm.exe can be found, on my machine, in C:\Windows\Microsoft.NET\Framework\v2.0.50727 and also in C:\Windows\Microsoft.NET\Framework64\v4.0.21006 and a few other places. Run Regasm that suits your MS Access, the 32 bits or 64 bits version.

Alternatively, if you have Windows SDK installed, then you may use the Tlbexp.exe utility to create a .tlb file. Again, use the correct Tlbexp.exe for your version of MS Office, 32 bit or 64 bit as appropriate.

Another account on making an assembly COM visible can be found in the post: "Making a .NET DLL COM-Visible", see:

Also, Appendix C of Access 2007 VBA Programmer's Reference (Programmer to Programmer) by Teresa Hennig, Rob Cooper, Geoffrey Griffith, and Armen Stein (Paperback - May 14, 20.07) has a good account of making a .NET assembly COM-Visible.

MS Access VBA Code

The code in here is not meant to be production code, but rather an example. As such, simplification was the primary directive, not functionality nor robustness.

The Access application is very, very simple. It contains one table and two columns. The purpose of this example is to simulate internal events; when one or more events are true, then the alarm should sound. When none of the events is true, then the alarm should stop. The table named "Table1" consists of two columns: "ID" an AutoNumber column, and "SoundAlarm", a True/False column.

In real life, we would probably provide an alarm on/off global flag, a snooze on/off global flag, etc., which means that we need a more sophisticated set of rules to handle all of these. But for us right now, this simple rule will do.

The first order of the day is to reference the DLL we built. Within the VBA code (Alt-F11) from the "Tools" menu, select "References...", and the system will respond with the following dialog:

Image 4

Select the "Browse..." button and open the .tlb file you created with the Regasm utility.

Now, you will need two forms, the first contains the table (for which a sub form will be created). The second is the hidden form carrying the OnTimer routine, which looks as follows:

' This function handler will handle the case where
' internal processing turn alarm events on/off
Private Sub Form_Timer()
    Dim events As Long

    ' How many events do we have needing an alarm
    events = modAlarm.NumberOfTriggerEvents

    ' If there are none then turn the alarm off!!
    If events = 0 Then
        Exit Sub
    End If

    ' If alarm is running do not restart the sound
    If modAlarm.IsAlarmOn Then Exit Sub

    ' Alarm is not running turn it on

End Sub

The OnLoad method of the Alarm form is:

Private Sub Form_Load()
    DoCmd.OpenForm "HiddenForm", acNormal, WindowMode:=acHidden
End Sub

A production application is more than likely to employ a startup routine that will perform some upfront work. This startup routine will likely be the place where the hidden form "HiddenForm" will be loaded.

The library of supporting routines is in a VBA module, "modAlarm", as follows:

Option Compare Database
Option Explicit

' Alarm itself
Private alarm As AlarmCS.AlarmCS

' State of Alarm
Private alarmOn As Boolean

' Initialization of module
Public Sub AlarmInit()
    Set alarm = New AlarmCS.AlarmCS
    alarmOn = False
End Sub

' Read only view to the world of the alarmOn state
Public Property Get IsAlarmOn() As Boolean
    IsAlarmOn = alarmOn
End Property

' A function returning the number of events needing alarm
Public Function NumberOfTriggerEvents() As Long
    Dim sql As String, rc As Boolean, rs As ADODB.Recordset
    Dim cmnd As ADODB.Command

    sql = "SELECT COUNT(*) FROM [Table1] WHERE SoundAlarm"
    Set cmnd = New ADODB.Command
    With cmnd
        .ActiveConnection = CurrentProject.Connection
        .CommandText = sql
        .CommandType = adCmdText
        Set rs = .Execute
    End With

    If rs Is Nothing Then
        NumberOfTriggerEvents = 0
    ElseIf rs.EOF Then
        NumberOfTriggerEvents = 0
    ElseIf rs(0) = 0 Then
        NumberOfTriggerEvents = 0
        NumberOfTriggerEvents = rs(0)
    End If
End Function

' Turn alarm on/off depending on event count
Public Sub TurnAlarmOnOff()
    Dim events As Long
    ' Check for event needing alarm count
    events = NumberOfTriggerEvents()

    ' Turn alarm on if count is greater than 0
    ' Turn alarm off otherwise
    If events > 0 Then
        ' if alarm is already running do not return it on
        If alarmOn Then Exit Sub
    End If
End Sub

' Turn alarm on unconditionally
Public Sub TurnAlarmOn()
    On Error GoTo TurnAlarmOnErr
    alarmOn = True
    Exit Sub

    ' Probably needs to run due to debugging stop/start
    If Err.Number = 91 Then
        Exit Sub
    End If

    ' Not a good idea to publish function names, 
    ' but this is an instructional
    ' software as opposed to production software
    MsgBox Err.Description, vbOKOnly, "TurnAlarmOn [" & _
        Err.Number & "]"
End Sub

' Turn alarm off unconditionally
Public Sub TurnAlarmOff()
    On Error GoTo TurnAlarmOffErr
    alarmOn = False
    Exit Sub

    ' Probably needs to run due to debugging stop/start
    If Err.Number = 91 Then
        Exit Sub
    End If

    ' Not a good idea to publish function names, 
    ' but this is an instructional
    ' software as opposed to production software
    MsgBox Err.Description, vbOKOnly, "TurnAlarmOff [" & _
        Err.Number & "]"
End Sub


I have shown the steps to create a reference .NET DLL to be accessed from MS Access for the purposes of processing a long-running process. A second possibility is to write an add-on routine. See Appendix C of Access 2007 VBA Programmer's Reference (Programmer to Programmer) by Teresa Hennig, Rob Cooper, Geoffrey Griffith, and Armen Stein (Paperback - May 14, 20.07) in order to accomplish the add-in .NET routine.

The .NET development can be done using any of the VS versions; however, you should use the lowest MS Access version that your customers will be using.



This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)


About the Author

Avi Farah
United States United States

Comments and Discussions

QuestionVBA Multithreading Tool Pin
Member 1176681110-Sep-15 23:01
MemberMember 1176681110-Sep-15 23:01 
AnswerRe: VBA Multithreading Tool Pin
Avi Farah12-Sep-15 13:36
MemberAvi Farah12-Sep-15 13:36 
QuestionMS Access VBA Parallel Processing Pin
Avi Farah10-Jul-15 19:25
MemberAvi Farah10-Jul-15 19:25 
AnswerRe: MS Access VBA Parallel Processing Pin
Avi Farah10-Jul-15 20:08
MemberAvi Farah10-Jul-15 20:08 
QuestionMTS Video Converter: Convert HD TS, MTS, MKV, H.264/AVC Pin
Member 1053726120-Jan-14 18:40
MemberMember 1053726120-Jan-14 18:40 
GeneralConfused by Contradiction in article Pin
DaveAuld30-Jan-10 23:24
professionalDaveAuld30-Jan-10 23:24 
GeneralRe: Confused by Contradiction in article Pin
Avi Farah31-Jan-10 5:23
MemberAvi Farah31-Jan-10 5:23 
GeneralFormatting issue [modified] Pin
DaveAuld29-Jan-10 4:41
professionalDaveAuld29-Jan-10 4:41 
GeneralRe: Formatting issue Pin
Avi Farah29-Jan-10 19:27
MemberAvi Farah29-Jan-10 19:27 
GeneralRe: Formatting issue Pin
DaveAuld30-Jan-10 0:26
professionalDaveAuld30-Jan-10 0:26 
GeneralRe: Formatting issue Pin
Avi Farah30-Jan-10 15:51
MemberAvi Farah30-Jan-10 15:51 
GeneralRe: Formatting issue Pin
DaveAuld30-Jan-10 23:19
professionalDaveAuld30-Jan-10 23:19 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.