Click here to Skip to main content
15,867,568 members
Articles / Web Development / ASP.NET

Beginner's Guide: Exploring IIS 6.0 With ASP.NET

Rate me:
Please Sign up or sign in to vote.
4.95/5 (132 votes)
29 Nov 2009CPOL26 min read 615K   293   107
This article describes details of IIS configuration, Virtual Directory creation, Application Pool creation, Application Pool settings, IIS request processing for ASP.NET, etc.

Table of Contents

Introduction

In the past, I have written a few articles for beginners and had got a very good response from all readers. This time I have planned to write an article on IIS 6.0 and Integration of IIS with ASP.NET. I have worked on IIS 5.1, IIS 6.0, and IIS 7.0. Though the purpose of all IIS servers are the same, they are very different in their architecture and use. Don't worry, I am not going to explain the differences of those three versions of IIS. The purpose of this article is completely different. While answering in the ASP.NET forum, I found many questions on deploying websites, the security settings of IIS, different authentication types, Application Pool, recycling of application pool, etc. This is an "All in One" article for IIS. This will help beginners know what IIS is, how to install IIS, how to deploy sites on IIS, create an Application Pool, web garden, etc. This article is all about IIS 6.0. If anybody is interested in IIS 7.0, please read the article Deploying ASP.NET Websites on IIS 7.0. Please give your valuable suggestions and feedback to improve this article.

What is a Web Server

Visual Studio has its own ASP.NET engine which is responsible for running your web application so you don't have any problems running an ASP.NET application from the VS IDE. When you want to host your site for others to access, the concept of a "Web Server" comes into picture. A web server is responsible for providing a response to requests that come from clients. So when multiple users come in, multiple requests also come in and the web server will have a response for each of them. IIS (Internet Information Server) is one of the most powerful web servers from Microsoft that is used to host ASP.NET web applications. IIS has its own ASP.NET Process to handle ASP.NET requests. If you look at this picture:

Application Pool

IIS Server Overview

The first client will make a request to the web server (IIS), the web server checks the request and will pass the request to the ASP.NET Process (don't get confused here, I have explained the details), the ASP.NET process engine will process the request and pass the response to the client via the web server. One of the major roles of IIS is handling each and every request. Don't worry, I have explained each and everything in more detail later. So far I hope it is clear why we are using a web server.

Introduction to IIS

IIS 6.0 provides a redesigned World Wide Web Publishing Service architecture that can help you achieve better performance, reliability, scalability, and security for your web sites. In this section, I have described an overview of IIS and an installation guide for IIS 6.0.

Overview of IIS

Internet Information Server is one of the most powerful web servers provided by Microsoft that is able to host and run your web applications. IIS supports the following protocols: FTP, FTPS, SMTP, NNTP, HTTP/HTTPS. We can host our web sites on IIS, we can use it as an FTP site also. For more information, click here.

IIS Version in Different OSs

Below is a list of IIS versions that support the following Oerating Systems:

Operating SystemIIS Version
Windows Server 2008IIS 7.0
Windows Vista - Home Premium/ UltimateIIS 7.0
Windows Server 2003IIS 6.0
Windows XP ProfessionalIIS 5.1
Windows 2000 Server IIS 5.0 IIS 5.0

How to Install IIS 6.0

Installation of IIS is very similar to installing any other system application from the Control Panel. We have to start navigation from Control Panel > Add/Remove Programs, then select Add/Remove Windows Component. Follow the screen given below.

Installation of IIS

IIS installation

Select "Application Server" from the checkbox list. This will open a new window, select IIS, and click on OK.

Installation of IIS

IIS installation selection

This will initiate IIS installation. The OS will show a continuous progress bar during installation and will show a final message after installation is complete.

Installation of IIS

IIS installation progress

Note: During the installation period, it may ask for some OS files. You need to provide the paths for them. After successful installation of IIS, go to Start > Run > Inetmgr to launch IIS. The below screen will appear, which indicates that IIS has been successfully installed in your system.

IIS Installation

IIS installed successfully

IIS 6.0 Process Model and Request Processing

Before starting with a virtual directory and Application Pool and all other stuff, let us have a quick look into the IIS 6.0 Process module and IIS request processing. This topic is a huge one. Here I am just giving you an overview.

We can divide the whole architecture into two layers.

  • Kernel Mode
    • HTTP.SYS
  • User Mode
    • Web Admin Service
    • Virtual Directory
    • Application Pool

Process1.JPG

IIS 6.0 Process module

As per the above diagram, IIS has two modes, Kernel and User. HTTP.SYS is the heart of kernel mode which accepts raw requests from the client and pass it to a particular application pool. Below are the steps of IIS request processing.

  1. Client requests for a page from the browser by hitting the site URL.
  2. Request comes to kernel level. HTTP.SYS catches the requests and creates a separate queue for each and every application pool.
  3. Note: Whenever we create an application pool, IIS automatically registers the pool with HTTP.SYS to identify it during request processing.

    Then HTTP.SYS forwards the request to the Application Pool.

  4. A request coming to the application pool means the worker process (w3wp.exe) starts action by loading the ISAPI Filter.
  5. Based on the requested resource, w3wp.exe loads "aspnet_isapi.dll" for an APSX page and starts an HTTPRuntime which is the entry point of an application.
  6. Then the HttpRuntime.ProcessRequest method signals the start of processing.
  7. The HttpContext object represents the context of the currently active request, as it contains references to objects you can access during the request lifetime, such as Request, Response, Application, Server, and Cache.
  8. The HttpRuntime creates a pool of HttpApplication objects.
  9. The request passes through the HTTP Pipeline.
  10. HTTP Modules are executed against the request until the request hits the ASP.NET page HTTP Handler.
  11. Once the request leaves the HTTP Pipeline, the Page life cycle starts.

If you want to know the details of IIS request processing, I will suggest you read the article ASP.NET Internals: Request Architecture.

Deploying Your Web Sites on IIS

In this section, I discuss how to host a site on IIS, how to create a virtual directory, configure a virtual directory, etc. Let's start with virtual directory creation.

Creating a Virtual Directory

There are various way to host a web application on IIS. Visual Studio has some inbuilt features to host and create a virtual directory on IIS directly. Here is one of my articles on hosting a site on IIS from Visual Studio. But in this section, Idiscuss the basic steps for creating a virtual directory.

First, right click on Default web sites > New > Virtual Directory.

IIS Installation

Virtual directory creation

By selecting "Virtual Directory...", the virtual directory creation wizard will start. Click on "Next".

IIS Installation

Virtual directory creation

Give the "Alias" name and proceed for "Next". The alias name is your virtual directory name.

IIS Installation

Virtual directory creation

As its name implies, a "virtual directory" does not contain any physical file. We need to define the physical file path that it will refer to. We have to browse the physical path over here.

IIS Installation

Virtual directory creation

Now based on your requirements, you can select the check boxes and click on "Next". Generally, we select only the "Read" option.

IIS Installation

Virtual directory creation: Permission settings

Below is a list of permissions that we can use:

  • Read: It is the most basic and is mandatory to access webpages of your application.
  • Run Scripts: It is required for ASPX pages, not for static HTML pages because ASPX pages need more permissions so they could conceivably perform operations.
  • Execute: This allows the user to run an ordinary executable file or CGI application. This can be a security risk so only allow when it is really needed.
  • Write: It allows to add, modify, or remove files from the web server. This should never be allowed.
  • Browse: This allows one to retrieve a full list of files in a virtual directory even if the contents of the files are restricted. It is generally disabled.

You are done! The virtual directory has been created successfully. You will get a final message. Click on "Finish" to close the window and move forward.

IIS Installation

Virtual directory creation: Finish

There are other alternative options that you can use for creating a virtual directory.

  1. Copy the physical directory to the wwwroot folder.
  2. Physical Folder Properties > Web Sharing.

Configure Virtual Directory

The items listed below are very important for the configuration of any web application.

  • Virtual Directory
  • Documents
  • Documents
  • ASP.NET
  • Directory Security
  • Custom Errors

I have explained each of them step by step. Apart from them, a Virtual Directory can have settings like BITS Server Extension, HTTP Header, etc. I haven't covered those in this article. Let us start with the "Virtual Directory" tab.

Virtual Directory

This is the most important configuration section for a virtual directory. To open this tab, we need to select the newly created virtual directory.

IIS Installation

Virtual directory configuration

Right click on it > Properties. The below screen will come up:

IIS Installation

Virtual directory properties

Here we can change the local path (physical path). Before looking into other stuff, first look into the "Application Settings" section. It seems the application name is disabled. So first we need to click the "Create" button, which will enable the rest of the settings. Check the below image.

IIS Installation

Virtual directory creation

Here we can change the execution setting and application pool name. Choosing "None" for Execute Permission will restrict the access to the web site. Now we will move to the "Documents" tab.

Documents

The Documents tab is used to set the default page of your web application. We can add or remove the page name in this section. To configure, we have to move to the "Documents" tab.

IIS Installation

Virtual directory creation

This is useful when you want to access the site directly with the virtual directory name. For example, if your virtual directory name is "mywebsite" and your home page name is "home.aspx", then you can access the page as follows:

http://<ip>/mywebsite/home.aspx

but if you define home.aspx in the Documents section, you need to only use this at the address bar to access the site:

http://<ip>/mywebsite

ASP.NET

If IIS is registered with multiple .NET Framework versions, the ASP.NET version dropdown list shows all of them. But based on the application, we need to change the framework version. E.g.: If our application was developed in .NET 2.0, then the version should be 2.0.X.X.

IIS Installation

ASP.NET version selection

Tip: If .NET Framework is already installed in your system when you are installing IIS, then ASP.NET will not be registered with IIS. So if you host an application on IIS, it will not work. To register IIS with the ASP.NET version, you need to run the aspnet_regiis -i command from the command prompt. This will automatically register the .NET Framework with your IIS.

For more info, please read this.

Directory Security

Directory security enables all kinds of security access for your web application. For directory, we need to move to the "Directory Security" tab.

IIS Installation

Directory security settings

Click on the "Edit" button to modify the directory security settings. After clicking on the Edit button, the below screen will come up.

IIS Installation

Directory security settings

Below are the commonly used IIS security settings:

  • Anonymous
  • Integrated Windows Authentication
  • Basic Authentication
  • Digest Authentication
Anonymous

Anonymous authentication means the site is accessible to all. This is the default authentication mode for any site that is hosted on IIS, and it runs under the "IUSR_[ServerName]" account. We can change it by clicking on the "Browse" button.

Integrated Windows Authentication

This authentication mode is generally used for Intranet sites. Users are authenticated from the Active Directory. Integrated Windows authentication is also known as NTLM authentication. If browser settings automatically login for trusted sites for Windows authentication then the site will be logged in automatically with the Windows user credentials.

Basic Authentication

This is supported by all browsers and is a part of the HTTP standard. This shows a login dialog control which accepts the user name and password. The user ID and password are passed to IIS to authenticate the user from the Windows credentials.

Digest Authentication

The disadvantages of Basic authentication mode is that it sends a password as plain text. Digest authentication does almost the same thing as basic authentication but it sends the "hash" of the password rather than sending plain text.

Integrated Windows, Basic Authentication, and Digest Authentication use Active Directory to authenticate the user.

Note: There are many things related with IIS and ASP.NET Security configuration. I am not covering all these in detail. I am just giving a brief overview so that you are comfortable with all this stuff.

For configuring SSL, please read the reference link that I have provided in the References section.

Custom Errors

The Custom Errors tab allows us to specify the error page that will be displayed for any specific type of HTTP Error.

IIS Installation

Directory security settings

We can also customize the setting at our application level by configuring the web.config settings or changing the htm file path by clicking on the "Edit" button.

This is all about the basic overview of creation of virtual directories and setting up. Hope you are now comfortable with all this stuff.

Application Pool

Application pool is the heart of a website. An Application Pool can contain multiple web sites. Application pools are used to separate sets of IIS worker processes that share the same configuration. Application pools enable us to isolate our web application for better security, reliability, and availability. The worker process serves as the process boundary that separates each application pool so that when a worker process or application is having an issue or recycles, other applications or worker processes are not affected.

Application Pool

Application pool - IIS

Generally we do it in our production environment. The main advantages of using an application pool is the isolation of worker processes to differentiate sites and we can customize the configuration for each application to achieve a certain level of performance. The maximum number of application pools that is supported by IIS is 2000.

In this section, I have discussed about the creation of application pools, application pool settings, and assigning an application pool to a web site.

How to Create an Application Pool?

Application pool creation in IIS 6.0 is a very simple task. There are two different ways by which we can create an application pool. There is a pre-defined application pool available in IIS 6.0, called "DefaultApplicationPool". Below are the two ways to create an application pool:

  • Create New Application Pool
  • Create From Existing Configuration File

Create a New Application Pool

First of all, we need to open the IIS Configuration Manager. Then right click on Application Pool and go to New > Application Pool.

Application Pool Creation

Create new application pool

The below screen will appear, where we need to mention the application pool name.

Application Pool Creation

New application pool name

When we create a new application pool, we can use the default application setting for it. The selection of "Default Settings" means by default the application pool setting will be the same as the IIS default settings. If we want to use the configuration of an existing application pool, we need to select the section option "Use existing application pool as template". Selecting this option will enable the application pool name dropdown.

Application Pool Creation

Application pool template selection

If we select an existing application pool as a template, the newly created application pool should have the same configuration of the template application pool. This reduces the time for application pool configuration.

That is all about creating a new application pool. Now let us have a look at the creation of an application pool from an existing XML configuration file.

Create From Existing Configuration File

We can save the configuration of an application pool into an XML file and create a new application pool from that. This is very useful during the configuration of an application pool in a Web Farm where you have multiple web servers and you need to configure the application pool for each and every server. When you are running your web application on a Load Balancer, you need to uniquely configure your application pool.

So first of all, you need to save the application pool configuration in a server. Check the below image for details.

Application Pool Creation

Application pool template selection

During this operation, we can set the password for the configuration file which will be asked during the import of the application pool on another server. When we click on "Save Configuration to a file", the below screen will appear.

Application Pool Creation

Save configuration as XML file

Where we need to provide the file name and location. If we want, we can set a password to encrypt the XML file. Below is a part of that XML:

Location ="inherited:/LM/W3SVC/AppPools/StateServerAppPool"
AdminACL="49634462f0000000a4000000400b1237aecdc1b1c110e38d00"
AllowKeepAlive="TRUE"
AnonymousUserName="IUSR_LocalSystem"
AnonymousUserPass="496344627000000024d680000000076c20200000000"
AppAllowClientDebug="FALSE"
AppAllowDebugging="FALSE"
AppPoolId="DefaultAppPool"
AppPoolIdentityType="2"
AppPoolQueueLength="1000"
AspAllowOutOfProcComponents="TRUE"
AspAllowSessionState="TRUE"
AspAppServiceFlags="0" 
AspBufferingLimit="4194304"
AspBufferingOn="TRUE"
AspCalcLineNumber="TRUE"
AspCodepage="0"pre>

Now we can create a new application pool for this configuration file. While creating a new application pool, we have to select the "Application Pool ( From File )" option as shown in the below figure.

Application Pool Creation

Application pool creation from a configuration file

When we select this option, a screen will come where we need to enter the file name and the password of that file.

Application Pool Creation

Application pool creation from configuration file

Select the file and click on the "Read File" button. This will show you the imported application pool name. Click "OK" to import the full configuration.

Application Pool Creation

Application pool creation from configuration file

Here we need to mention the new application pool name or we can have another option where we can replace an existing application pool. For moving ahead, we need to provide the password.

Application Pool Creation

Password to import application pool configuration

This is the last step for creating a new application pool from an existing configuration file.

Configure Application Pool Properties

This is one of the most important tasks for web server configuration and this is important when we are hosting on a production server. As I have already discussed, the application pool is the heart of any web application hosted on IIS. We need to know each and every configuration of the application pool. To start configuration, we need to go to the Properties of the application pool.

Application Pool Creation

Application pool properties

We need to configure the following things in the application pool:

  • Recycling
  • Performance
  • Health
  • Identity

Recycling

Recycling the application pool means recycling the worker process (w3wp.exe) and the memory used for the web application. It is a very good practice to recycle the worker process periodically, which wll keep the application running smooth. There are two types of recycling related with the application pool:

  • Recycling Worker Process - Predefined settings
  • Recycling Worker Process - Based on memory
Recycling Worker Process - Predefined Settings

Worker process recycling is the replacing of the instance of the application in memory. IIS 6.0 can automatically recycle worker processes by restarting the worker processes that are assigned to an application pool and associated with websites. This improves web site performance and keeps web sites up and running smoothly.

Application Pool Creation

Application pool recycling- Worker process

There are three types of settings available for recycling worker processes:

  • In minutes
  • Number of requests
  • At a given time

Recycle Worker Process (In Minutes)

We can set a specific time period after which a worker process will be recycled. IIS will take care of all the current running requests.

Recycle Worker Process (Number of Requests)

We can configure an application with a given number of requests. Once IIS reaches that limit, the worker process will be recycled automatically.

Recycle Worker Process (In Minutes)

If we want to recycle the worker process at any given time, we can do that configuration on IIS. We can also set multiple times for this.

Application Pool Creation

Application pool recycling - Worker process: Time setting
Recycling Worker Process - Based on Memory

Server memory is a big concern for any web application. Sometimes we need to clean up a worker process based on the memory consumed by it. There are two types of settings that we can configure in the application pool to recycle a worker process based on memory consumption. These are:

  • Maximum virtual memory used
  • Maximum used memory

Application Pool Creation

Application pool recycling - Worker process.

At any time, if the worker process consumes the specified memory (at memory recycling settings), it will be recycled automatically.

What Happens During Application Pool Recycling

This is quite an interesting question. Based on the above settings, an application pool can be recycled any time. So what happens to the users who are accessing the site at that time? We do not need to worry about that. This process is transparent from the client. When you recycle an application pool, HTTP.SYS holds onto the client connection in kernel mode while the user mode worker process recycles. After the process recycles, HTTP.SYS transparently routes the new requests to the new worker process.

Performance

Moving to the Performance tab in the Properties dialog box results in the following output.

Application Pool Creation

Application pool performance

To improve the performance of a web application, we can setup the performance settings of the application pool. We can set the shut down time of the worker process based on the ideal time. The worker process will be shut down at a given time period if it is ideal. Whenever a new requests comes, it will live again. Another important thing for improving the performance is "Web Garden".

Web Garden
Overview of Web Garden

By default, each application pool runs with a single worker process (W3Wp.exe). We can assign multiple worker processes with a single application pool. An application pool with multiple worker processes is called a Web Garden. Many worker processes with the same application pool can sometimes provide better throughput performance and application response time. And each worker process should have its own thread and memory space.

Application Pool Creation

Web Garden (Application pool with multiple worker processes)

As Shown in the picture, in IIS Server, there may be multiple application pools and each application pool has at least a single worker process. A Web Garden should contain multiple worker processes.

There are certain restrictions in using a Web Garden with your web application. If we use Session Mode as "in proc", our application will not work correctly because the Session will be handled by a different worker process. To avoid this, we should use Session Mode as "out proc" and we can use "Session State Server" or "SQL-Server Session State".

How to Create a Web Garden?

We need to increase the number of worker processes on the Performance tab.

Application Pool Creation

Web garden creation

Main advantage: The worker processes in a web garden share the requests that arrive for that particular application pool. If a worker process fails, another worker process can continue processing the requests.

Health

Now we move to the "Health" tab. When wel select the "Health" tab, it will show the following screen:

Application Pool Creation

Health monitoring setting

IIS provides a couple of settings to improve the health of an application pool. There are also a few settings for measuring the worker process health. These are:

  • Enable Pinging
  • Enable Rapid-fail protection
  • Startup time limit
  • Shutdown time limit
Enable Pinging

This property specifies whether the WWW Publishing Service should periodically monitor the health of a worker process. Checking this option indicates to the WWW service to monitor the worker processes to ensure that worker processes are running and healthy. By default, it sets to 30s. This is also needed to check if a service is staying ideal or not. If it is ideal it can be shutdown until the next request comes. The Windows Activation Process maintains all this stuff.

Enable Rapid-fail Protection

When enabling Rapid Fail Protection, the application pool is shut down if there are a specified number of worker process crashing within a specified time period. When this happens, the WWW Publishing Service puts all applications in the application pool "out of service".

Failure Count: The default value for failure count is 5 minutes. This property specifies the maximum number of failures allowed within the number of minutes specified by the "Time Period" property before the application pool is shut down by Rapid Fail Protection. If the number of failure is more than the specified in a given time, the application pool should be put on "out of service mode".

Time period: This property specifies the number of minutes before the failure count for a process is reset. By default, it is set to 5 minutes.

Startup time limit

The Start up time limit property specifies the amount of time that the WWW Publishing Service should wait for a worker process to finish starting up and reporting to the WWW Service. In general it means the time taken to start a worker process.

Shutdown time limit

This is the shutdown time for a worker process. This is the time required to execute all old running worker process requests before it shuts down during recycle time.

Identity

This is the last and final setting for an application pool. An application pool has three types of identity: "Network Service" is the default Identify. "defaultappPool" also runs under the "Network Service" Identity. Below are the listed application pool identities with description:

IdentityDescription
LocalSystemA built-in account that has administrative privileges on the server. It can access both local and remote resources. For any kind accessing of server files or resources, we have to set the Identity of the application pool to Local System.
LocalServicesBuilt-in account has privileges of an authenticated local user account. It does not have any network access permission.
NetworkServicesThis is the default Identity of an application pool. NetworkServices has privileges of an authenticated local user account.

Navigating to the Identity tab will show the following screen:

Application Pool Creation

Application pool identity configuration

We can also configure the application pool under a given user account. For that, we need to select the "Configurable" option on "Identity" tab.

This is all about the application pool. Hope now you have a very good understanding on what application pool is, how to create and configure the application pool.

Q: You are using a file upload control in your web application and it is working fine on Visual Studio but when you host the same code on IIS, it is not working. This is a very common problem in web hosting when file upload is involved.

A: When a web application runs under Visual Studio - ASP.NET engine integrated with visual studio takes care of all the executions. And this engine has sufficient rights so that it can write data on your disk. But when you host the site on IIS, as I have already mentioned, it runs under the "Network Services" Identity, which has very minimum rights on your system. The user can only have read access on the site. So for resolving file upload issues, you need to change the Identity of the application pool from "Network Service" to "Local System". Local System identity means the client can have write access on your hard drive. This will resolve your issue of file uploading on the server.

You can also resolve this issue by giving Write access permission to the file destination folder for "Everyone".

Enabling Web Service Extension

IIS 6.0 provides a certain type of configuration from where we can enable/disable web service extensions. If we want to prohibit/restrict any kind of extension, we need to select the extension and click on the "Prohibit" button.

Application Pool Creation

Web Service extension vonfiguration

Note: If the ASP.NET v 2.0.X.XXXX extension is prohibited over here, you will not be able to access the site which is running on .NET 2.0.

Debugging Your Application That Hosted on IIS

If your site is hosted on IIS and we want to debug the site, the main thing that we need to do is attach a worker process with Visual Studio. There are two possible scenarios for debugging from IIS:

  1. Site is hosted on local IIS server: Local IIS debugging
  2. Site is hosted on remote IIS server: Remote IIS debugging

I have already published two complete articles on CodeProject on the above topic. Please refer to those for details.

Summary

To summarize, this article is for beginners who are trying to learn about IIS. This article gives a complete coverage of IIS, hosting sites on IIS, application pool creation, etc. I have also mentioned a few tips which are very commonly used in dealing with IIS. Hope this will help beginners struggling with site hosting on IIS and configuring it. There are so many things related with IIS and it is not possible to mention all of them in a single article. This is just an overview. I hope that in future I will publish a few more articles on IIS in detail. Please give your valuable feedback and suggestions in order to improve the article. Thank you.

My IIS Articles @ CodeProject

Below are a few articles on IIS that I have published at CodeProject:

  1. Deploying ASP.NET Websites on IIS 7.0
  2. Debug Your ASP.NET Application Hosted on IIS: Process Attach and Identify Which Process to Attach
  3. Remote IIS Debugging: Debug Your ASP.NET Application Hosted on a "Remote IIS Server"

Reference and Further Study

  1. IIS 6.0 Architecture
  2. IIS 6.0 Process Model
  3. IIS 6.0 Request Processing
  4. ASP.NET Internals - Request Processing
  5. Deploying a Site on IIS
  6. Application Pool Health Monitoring
  7. Application Pool Health Check
  8. IIS Internals
  9. More About Application Pools
  10. SSL Configuration in IIS

Here are some good tutorials for FTP configuration on IIS. These may be very helpful for beginners:

  1. Creating and Configuring FTP Sites in Windows Server 2003
  2. How to Set Up an FTP Server in Windows Server 2003

Points of Interest

Hope you have enjoyed this article. Please don't forget to give your feedback and suggestions.

History

  • Initial post: 29 Sep., 2009.

License

This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)


Written By
Technical Lead
India India
.NET Consultant | Former Microsoft MVP - ASP.NET | CodeProject MVP, Mentor, Insiders| Technology Evangelist | Author | Speaker | Geek | Blogger | Husband

Blog : http://abhijitjana.net
Web Site : http://dailydotnettips.com
Twitter : @AbhijitJana
My Kinect Book : Kinect for Windows SDK Programming Guide

Comments and Discussions

 
GeneralMy vote of 5 Pin
Jadii Griffin21-Jan-16 6:25
Jadii Griffin21-Jan-16 6:25 
QuestionExcellent article! Pin
Shanmugam R P2-Jul-15 4:47
Shanmugam R P2-Jul-15 4:47 
GeneralFeedback Pin
Member 1145432315-Feb-15 14:00
Member 1145432315-Feb-15 14:00 
QuestionGreat explanation Pin
Its Tinku29-Jan-15 3:29
Its Tinku29-Jan-15 3:29 
QuestionExcellent Pin
Pankaj__Sharma6-Jun-14 0:42
Pankaj__Sharma6-Jun-14 0:42 
QuestionExcellent Pin
Purushotham Agaraharam20-Jan-14 0:37
Purushotham Agaraharam20-Jan-14 0:37 
QuestionHow can i run asp .net i Pin
Harisul Islam23-Nov-13 15:35
Harisul Islam23-Nov-13 15:35 
QuestionRegd: IIS6 deployment Pin
Ashokk8816-Jun-13 19:19
Ashokk8816-Jun-13 19:19 
GeneralMy vote of 5 Pin
sagar pathe16-May-13 23:35
sagar pathe16-May-13 23:35 
QuestionUnder which user clients request runs on IIS and how it uses its resources on web users? Pin
Sheeraz Raza7-Feb-13 1:07
Sheeraz Raza7-Feb-13 1:07 
QuestionWebsite misbehave sometimes Pin
Er Atul Sharma20-Jan-13 21:22
Er Atul Sharma20-Jan-13 21:22 
QuestionComment Pin
srinivaskota4-Oct-12 3:01
srinivaskota4-Oct-12 3:01 
GeneralMy vote of 5 Pin
Austin Zhang12-Jul-12 20:31
Austin Zhang12-Jul-12 20:31 
GeneralMy vote of 5 Pin
Bhupendra Chauhan1-Jun-12 8:41
professionalBhupendra Chauhan1-Jun-12 8:41 
GeneralMy vote of 5 Pin
Santanu Tripathy29-Jan-12 20:54
Santanu Tripathy29-Jan-12 20:54 
GeneralMy vote of 5 Pin
disturbed.online18-Dec-11 22:13
disturbed.online18-Dec-11 22:13 
GeneralMy vote of 5 Pin
shek12423-Nov-11 23:35
shek12423-Nov-11 23:35 
GeneralMy vote of 5 Pin
Nikil S22-Nov-11 2:50
Nikil S22-Nov-11 2:50 
GeneralMy vote of 5 Pin
SanketPatel21-Nov-11 15:17
professionalSanketPatel21-Nov-11 15:17 
GeneralMy vote of 5 Pin
Perry Bruins23-Apr-11 7:50
Perry Bruins23-Apr-11 7:50 
GeneralMy vote of 5 Pin
rama charan8-Dec-10 21:13
rama charan8-Dec-10 21:13 
GeneralMy vote of 5 Pin
raggu242-Oct-10 4:00
raggu242-Oct-10 4:00 
GeneralRe: My vote of 5 Pin
Abhijit Jana4-Oct-10 20:12
professionalAbhijit Jana4-Oct-10 20:12 
GeneralRe redirection to Login.aspx Pin
Ajay Kale New9-Sep-10 2:47
Ajay Kale New9-Sep-10 2:47 
GeneralRe: Re redirection to Login.aspx Pin
Abhijit Jana11-Sep-10 7:33
professionalAbhijit Jana11-Sep-10 7:33 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.