Get access to the new Intel® IoT Developer Kit, a complete hardware and software solution that allows developers to create exciting new solutions with the Intel® Galileo and Intel® Edison boards. Visit the Intel® Developer Zone for IoT.
Introduction
This article demonstrates to new users how to install Ubuntu* Core on an Intel® IoT Gateway GB-BXTB-3825. The GB-BXTB-3825 is powered by an Intel® Atom™ E3825 dual-core processor which would be ideal for industrial applications such as data generation, data aggregation, and data analysis. Ubuntu* Core is a lightweight, transactional version of Ubuntu* designed for deployments on IoT devices. Snaps are universal Linux packages that are available to install on Ubuntu* Core to work on IoT devices and more. More information on the Gateway GB-BXTB-3825 is available at http://b2b.gigabyte.com/Embedded-System/GB-BXBT-3825-rev-10#ov. You can get detailed information on the Ubuntu* Core at https://www.ubuntu.com/core.
Hardware Requirements
The hardware components used in this project are listed below:
- An Intel® IoT Gateway: GB-BXTB-3825
- 2 USB 2.0 or 3.0 flash drives with at least 2GB free space available
- USB keyboard and mouse
- A monitor with VGA or HDMI interface
- A VGA or HDMI cable
- A network connection with Internet access
- An existing Linux* system is required to generate the RSA key (see Figure-1 below) and to login with SSH into the Ubuntu Core (Figure-11 and Figure-12 below).
Software Requirements
The software requirements used in this project are listed below:
Generate a Host SSH Key
The first step is to create an Ubuntu SSO account from https://login.ubuntu.com. The account is required to create the first user on an Ubuntu Core installation.
- Click on the Personal details to fill out your information.
- Generate an RSA key
Use an existing Linux system to generate the RSA key by running ssh-keygen-trsa on the Linux shell:
Figure 1: Generate an SSH key on the Linux shell
Your public key is now available as .ssh/id_rsa.pub in your home folder /home/Ubuntu/.ssh/id_rsa.pub.
- Click on the SSH keys and insert the contents of your public key /home/Ubuntu/.ssh/id_rsa.pub.
Figure 2: Submitted the SSH keys successfully
Updating the BIOS
The Gateway should have its BIOS updated to the latest version. To check your Gateway BIOS version:
- Go to Start -> Run -> type "msinfo32.exe" or
- Turn on your Gateway and press F12 to enter the BIOS
Visit http://www.intel.com/content/www/us/en/support/boards-and-kits/000005850.html to download the latest BIOS version and for instructions on how to install.
Create a Live USB Ubuntu* Flash Drive
Booting from the Live USB Flash Drive
- Connect the USB hub, keyboard, mouse and the monitor to the Gateway GB-BXTB-3825.
Figure 3: Gateway GB-BXTB-3825
- Insert the Live USB Ubuntu Desktop flash drive you created earlier in to the Gateway GB-BXTB-3825.
- Turn on your Gateway GB-BXTB-3825 and press F12 on the key board to enter the boot menu.
- Select the USB flash drive as a boot option.
Figure 4: Select boot device
- Select "Try Ubuntu without installing".
Figure 5: Try Ubuntu without installing
Install Ubuntu* Core Image
- Insert the second USB flash drive containing the Ubuntu Core image file.
- Open a terminal and type:
xzcat /media/ubuntu/<name of the second USB flash drive>/ubuntu-core-16-amd64.img.xz | sudo dd of=/dev/sda bs=32M status=progress; sync
Figure 6: Flash Ubuntu Core
- Reboot the Gateway. The Gateway will reboot from the internal memory where the Ubuntu Core has been flashed.
Configure the Gateway
- After the Gateway has rebooted, you will see a prompt to Press enter to configure.
- Select start to configure your network. Below is an example of the network configuration.
Figure 7: Configure IPv4
Figure 8: After network configuration
- Enter the Ubuntu One email address that was set up earlier.
Figure 9: Profile setup
Figure 10: Configuration complete
First User login
- First, add RSA identities to the authentication agent by running ssh-add on the shell.
Figure 11: ssh-add command
- Next, login with SSH into the Ubuntu Core from a different machine on the same network. The password is not required.
Figure 12: ssh into Ubuntu Core
- Set a password in case you want to login from the local console on the IOT Gateway.
Figure 13: Set a password
Run Hello World Snap on LocalHost
Now the Gateway is ready for the snaps. Snaps are self-contained application bundles that contain most of the libraries and runtimes needed. It is a squashFS filesystem containing your app code and a snap.yaml file.
- Sign in to a Snap store using an Ubuntu SSO account:
- Install the Hello Snap using the snap name:
Figure 15: Install hello snap
Figure 16: Run hello snap
Summary
We have described how to install Ubuntu* Core on an Intel IoT Gateway GB-BXTB-3825 and also how to run the Hello World Snap. Visit https://snapcraft.io/docs/build-snaps to make your own snap and enjoy the power of the Intel® IoT Gateway GB-BXTB-3825.
Key References
About the Author
Nancy Le is a software engineer at Intel Corporation in the Software and Services Group working on Intel Atom® processor enabling for Intel® IoT projects.
You may know us for our processors. But we do so much more. Intel invents at the boundaries of technology to make amazing experiences possible for business and society, and for every person on Earth.
Harnessing the capability of the cloud, the ubiquity of the Internet of Things, the latest advances in memory and programmable solutions, and the promise of always-on 5G connectivity, Intel is disrupting industries and solving global challenges. Leading on policy, diversity, inclusion, education and sustainability, we create value for our stockholders, customers and society.
Submit an article or tip
