In this article I want to explain how algorithms in machine learning are working by going through low level explanation instead of just having a short glance on a high level. In this article I go into detail (including sometimes looking at the math behind these theories) on Classification, Clustering, Linear Regression, Gradient Descent, and using the code in MATLAB.

## What is Machine Learning

I decided to prepare and discuss about machine learning algorithms in a different series which is valuable and can be unique throughout the internet. I claim that there is a rare resource which is SIMPLE and COMPLETE in machine learning.

I want to explain how algorithms in machine learning are working by going through low level explanation instead of just having a short glance on a high level. I believe this way can widen our perspective and prepare us to apply them correctly. Because having high level and superficial theory about nice algorithm leads us nowhere, in return if we know what is happening under the layer of these algorithm, it can help us to use them more properly.

For having a better understanding about machine learning, I prefer to talk briefly about the whole story of machine learning.

Machine learning is a branch of computer science which has been extended from pattern recognition and artificial intelligence. Its meaning comes from where computer can learn how to predict phenomena with the aid of training data which are sample data that have occurred in the past and machine tries to anticipate what is the result of an event according to specific conditions. This learning process occurs in two different ways, one is supervised and another is unsupervised.

Supervised learning is to teach alphabets to kids under the supervision of his teacher and unsupervised learning is like a kid who tries to walk alone after trial and errors, he will understand how to walk correctly. In a better instance, in supervised, we tend to classify objects but in unsupervised, we actually do not know what we are looking for, we just study and watch some objects and we try to cluster them according to their similarity.

### Classification

Classification – Supervised: Assume a father shows a dog to his son and then if the son sees another race of dog, he can detect that it is a dog but of another kind. The goal was clear; son should see some dogs and his father told him that “it is dog” then he should detect dog –even from other color or race or size- in future.

### Clustering

Clustering – Unsupervised: But now the story is different, a father brings his son to the zoo and shows him different animals without telling him that what is their name. So his son can just categorize in his brain the various animals according to their color, size, etc. If in future, he sees an animal which is similar to one of those animals, he can say that “this animal –does not know its name- is similar to those animals that I have seen in the zoo in that cage.” So the goal here is that the son should cluster new animal to another animal that he has seen by now.

Supervised has f(X) = y and there is value for each feature, while in unsupervised there is just (X) without knowing its f(X).

Result: As a result, finally we encounter two different examples of problem to solve:

Supervised – Classification: According to past data in which there is specific output value- target or dependent variable which is called “Y” for one or more than one feature or independent variable which is called “X” or “X_{1,} X_{2}, …., X_{n}”. For example, there is a data set of patient information and we want to find out whether the patient will get cancer or not; or what is the price of some object in the near future according to their changing price in the past.

## Linear Regression

In some problems, we have no limitation for “Y” value such as price prediction, but in others such as when we want to know what is the probability of cancer in one patient, we have to give a result between zero and one.

- Y = aX + b
- Y is target value, dependent, output
- a is regression coefficient, slope
- X is independent value, feature, input
- b is constant value

I decided to make everything as KISS = Keep It Simple Stupid

Therefore, I designed a small data set by myself and we can study it easily and then you can go to my github and study according to real tutorial data set from machine learning course at university of Stanford by Andrew NG. Click __here __for more information about this course.

This data set is based on relation between study hours of students and their achieved grade. We draw a graph according to the above data and assign study hours to horizontal axis and grade to vertical axis. You see one student studies more, then he can get a better grade. So after looking at this graph, we want to predict if one student studies for 8 hours, then how much his grade would be?

## Gradient Descent

We need a line as blue line to determine the progress of changing grade based on study hours. Y and X are known by data set value, we just need a, b value to draw a blue line or “Prediction line”. No matter how precise we are, it is sometimes impossible or difficult to draw a prediction line without error. Error rate in machine learning is inevitable; but we should find the best a, b and minimize error rate to have an accurate output.

The vertical distance between actual value which is black star and predicted value on blue line which is yellow star is called “Prediction Error” or “Cost”. In order to calculate prediction error; we have to minus Prediction Error = Y_{actual }– Y_{predicted }Y_{prediction} = aX + b

Because we have more than one record in data set, we need to generalize the above formula to:

**Sum of Squared Errors (SSE) = ½ Sum (**Y_{actual}**– **Y_{predicted}**)**^{2}

But we need to minimize SSE as far as possible, we learnt in high school mathematics that we should derivate formula to make it optimum. Because we have two variables, we need two differentiations. Because we are working on a, b, we should make partial differentiations. In partial differentiation based on “a”, other variable such as “X”, “Y” and “b” in SSE should be kept as constant.

Before studying the above data set in depth, we need to standardize – normalize or scaling value in order to have equal range and/or variance. Because study hours are between (2,7) but grade is between (50,70), so there is variance in their scale which makes it difficulty to compare them.

First step is that compute “cost function” based on Ө = [a, b], these “a” and “b” are values which we have selected randomly.

- Select Ө = [a, b], a is slope and b is intercept randomly.
- Compute “Cost Function”.
- Compute “
**Gradient Descent**” for Ө = [a, b].
- anew = aold - r*∑ ∂SSE/∂a r is learning rate
- bnew = bold - r*∑ ∂SSE/∂b

- Again Compute “Cost Function” Cost Function
- Compare if new Cost Function value is less than before; if “Yes”, you are in the right direction, let's continue.
- Repeat and iterate step 3 to 5 until you find the best value.

** r is learning rate is the pace of learning, cost function should be decreased in every iteration and get convergence. If cost function in each repeat with different a, b is decreased, so we selected suitable r.

## Using the Code MATLAB

I used MATLAB R2012a (7.17.0.739)

### 1. Start to call Function "executegd.m";

Firstly there is "`executegd.m`

", I called all functions from here. In the first part, I loaded data frrom *data.txt* which is very simple text. Then I standardize data with mentioned formula above. Then I draw points according to new coordinates. Then I assume a=0, b=0 and computed "Cost Function", then I started to calculate best a, b with the help of "Gradient Descent" with learning rater r=0.01 and 1500 iteration.

clear ; close all; clc
%% ======================= Part 1: Load Data ==============================
% Load Data
fprintf('Plotting Data ...\n')
data = load('data.txt');
%% ======================= Part 2: Standardize Data =======================
% Standardize Data
data = standardizeData(data);
X = data(:, 1);
y = data(:, 2);
m = length(y); % number of training examples
%% ======================= Part 3: Plotting ===============================
% Plot Data
plotData(X, y);
fprintf('Program paused. Press enter to continue.\n');
pause;
%% =================== Part 4: Prediction Error - Copmute Cost ============
fprintf('Running Gradient Descent ...\n')
X = [ones(m, 1), data(:,1)]; % Add a column of ones to x
theta = zeros(2, 1); % initialize fitting parameters
% Some gradient descent settings
iterations = 1500;
alpha = 0.01;
% compute and display initial cost
predictionError(X, y, theta)
%% =================== Part 5: Gradient descent ===========================
% run gradient descent
theta = gradientDescent(X, y, theta, alpha, iterations);
% print theta to screen
fprintf('Theta found by gradient descent: ');
fprintf('%f %f \n', theta(1), theta(2));
% Plot the linear fit
hold on; % keep previous plot visible
plot(X(:,2), X*theta, '-')
legend('Training data', 'Linear regression')
hold off % don't overlay any more plots on this figure

### 2. Standardize "standardizeData.m"

function [stdata] = standardizeData(data)
%Standardize Data
X = data(:, 1);
Y = data(:, 2);
m = length(Y); % number of training examples
stdata = zeros(m, 2); % initialize fitting parameters
% StdDev = SQRT( sum[(X-mean)^2/(n-1)] )
meanX = mean(X);
stdX = std(X);
for i = 1:m
X(i) = ((X(i) - meanX)/stdX);
end
%Standardize(X) = X-mean /Std(X)
meanY = mean(Y);
stdY = std(Y);
for i = 1:m
Y(i) = ((Y(i) - meanY)/stdY);
end
stdata(:, 1)= X(:);
stdata(:, 2)=Y(:);

### 3. Plot "plotData.m"

function plotData(x, y)
figure; % open a new figure window
plot(x,y,'rx','MarkerSize',10);
ylabel('Profit');
xlabel('Population');
end

Then you should click on "**Enter**".

### 4. Compute "Cost Function" "predictionError.m"

function J = predictionError(X, y, theta)
%COMPUTECOST Compute cost for linear regression
% J = COMPUTECOST(X, y, theta) computes the cost of using theta as the
% parameter for linear regression to fit the data points in X and y
% Initialize some useful values
m = length(y); % number of training examples
%theta = zeros(2, 1); % initialize fitting parameters
% You need to return the following variables correctly
% ====================== YOUR CODE HERE ======================
% Instructions: Compute the cost of a particular choice of theta
% You should set J to the cost.
J=1/(2*m)*sum((X*theta - y).^2);
% =========================================================================
end

### 5. Compute theta(a, b) which Built Best Prediction Line by Gradient Descent, "gradientDescent.m"

function [theta] = gradientDescent(X, y, theta, alpha, num_iters)
%GRADIENTDESCENT Performs gradient descent to learn theta
% theta = GRADIENTDESENT(X, y, theta, alpha, num_iters) updates theta by
% taking num_iters gradient steps with learning rate alpha
% Initialize some useful values
%m = length(y); % number of training examples
J_history = zeros(num_iters, 1);
m = length(y); % number of training examples
for iter = 1:num_iters
if iter == 1
J_history(iter) = predictionError(X, y, theta);
elseif iter > 1
A=X(:,2);
B=-(y-(X*theta));
C=B'*A;
DefSSEb = sum(B);
DefSSEa = sum(C);
bold=theta(1,1);
aold=theta(2,1);
theta(1,1) = (bold - (alpha*(DefSSEb/m)));
theta(2,1) = (aold - (alpha*(DefSSEa/m)));
J_history(iter) = predictionError(X, y, theta);
end
end
theta = theta(:);
end

## Points of Interest

I found Machine Learning very exciting, I decided to work on it.

Gradient Descent is the first and foremost step to learn machine learning. As summarized, Machine learning is “getting data and work on data then give back result which is called its prediction”.

Therefore, error will occur 100%, the goal is using machine for prediction –because of huge and big data, machine can do it faster- but by observing error and try to select better prediction by gradient descent.

Gradient Descent story will not finish here in linear regression (with just one X), you will encounter it in multi variable and neural network.

Finally, I strongly recommend you to register machine learning in coursera.org:

& use my github as guidance for assignment:

## Feedback

Feel free to leave any feedback on this article; it is a pleasure to see your opinions and **vote **about this code. If you have any questions, please do not hesitate to ask me here.

I have been working with different technologies and data more than 10 years.

I`d like to challenge with complex problem, then make it easy for using everyone. This is the best joy.

ICT Master in Norway 2013

Doctorandin at Technische Universität Berlin in Data Scientist ( currently )

-------------------------------------------------------------

Diamond is nothing except the pieces of the coal which have continued their activities finally they have become Diamond.

http://www.repocomp.com/