Comments by Hemant__Sharma (Top 142 by date)

To the point, crisp and clear +4

Very Nice explanation +5

perfect +5

Accurate answer. I like it. a 5

Thank you Prasad :) I love +5 ;)

You are welcome.

You didn't anwer my questions. Which PDF component you are using in our code give us the name?
- Did you try pasting the clipboard data to MS paint? you can debug your code and put a breakpoint somewhere after pdfPage.CopyToClipboard(..) function, run your code when you reach to your debug breakpoint by that time the data must be copied to clip board. Open MS paint program and press Ctrl+V or Edit> paste.

i don't know if you can replace code to copy to file/binary stream with CopyToClipboard function as i don't know which component you are using.

Can you post full exception you are getting?

Please click on "Have a Question or Comment?" link if you want to reply. You didn't understand what i've explained. please see improved solution.

do you have your javascript in the same .aspx page where you have RadioButtonList control?
is ID of RadioButtonList control is "RadioBtn"?

Why did you copy-paste my solution ?

There is no technical problem here it's the logic which is not giving proper result.

when you said incorrect you should have explained what is happening in his case. see my answer.

The only reasonable way... if you are talking about performance, yes please explain "why". And when you give any theory please stick to current question's scenario only.

It may be safe to say string.Format is good to use and has 100s of feature but does it fit in current scenario? I always believe performance improvement solution depends on the scenario so if solution A can improve performance in Scenario 1 it doesn't gurantee it will improve performance in Scenario 2

thanks,
Hemant

No this is not right answer not even close. See my answer for the problem what is happening in OP's case. He implemented the same logic in his javascript code i.e. adding new line character before signature.

-Hemant

Add some code

you should add full message and trace of error messages you are getting and also the problem code where it is pointing.

--Hemant

See Edit 1 of my solution, i've improved the solution.

It's not event handler assignment, it's assigning value to a property.

Although the quesiton is not well formed but looking at the code it is confirmed it's in ASP.NET. because he is using i.e. OnClientClick (aps.net button server control's property) and confirm (javascript function for popup)

My 5. it's asp.net becaue OnClientClick is a property for ASP.NET Button server control and confirm is a javascript function.
Well caught.

Check my updated solution

You are welcome :). and thanks for the vote.

Thank you very much :)

1- first you should add sorrunding code.
2- add javascript code of btnDoAjaxCall_onclick();
3- Did you try debugging above javascript function in single click? i.e. setting a break point in the functiona nd checking if the debugger is coming in the function on single click of function

Thanks @SAKryukov.

About run-time vs Compile-time, i doubt i could have explained it better than you :).
--Hemant

Right...Right...Right.. My 5

Post your code with .aspx markup + javascript

interesting question let me do some R&D and i'll get back to you.

you are always welcome :)

Regards,
Hemant

Glad i could help.
But you have not accepted both solution. you can click on "Accept Solution" button and vote for the answer if you like it.

Thanks
--Hemant

you are welcome. :)

What type of application you are making a web applicaiton or windows application?

i've added a seperate solution because you have a new problem now. see additional solution i've added.
1 more thing always mark a solution as an answer if it solves your problem you have asked.

Thanks,
Hemant

Nice link. My 5.

try this
http://www.codeproject.com/Tips/87155/Formatting-code-in-Tips-and-Tricks.aspx

Glad i could help.
But, you see if the question would have framed clearly you would have got answer in fraction of seconds from the people commented in the beginning. So always keep it simple and put it in steps.

you will learn soon how to put question and asnwer the best way.. right now if you have problem explaning the issue always put them in 123 way.

1- $ this is where i'm
2- $ this is what i have
3- $ this is what i want to do with what i've in step 2

hope this will help.

Thanks,
Hemant

Thanks @Dalek Dave

Welcome.

Very good catch... my 5.

--Hemant

Check the updated solution

Thanks @Venkatesh.

Can you add the XML you are getting from "ds.GetXml();"? a little sample having couple of enteries from all table will do.

--Hemant

What does that mean? elaborate your question properly what you want to achieve and what data you have right now.
--Hemant

Right. My 5.

Wow.. well said. My 5.

Thanks a lot @charles.

aahhh my bad.. Thanks for reminding me.. yes i didn't notice that. I cannot give 5 to your comment :) bcz CP doesn't have such feature yet.

Thanks @Nithin.

Where are you trying to access the ViewState object? you cannot access viewstate outside it's page's scope.
It seems you have a .aspx page and a helper class where you have written GetEmployeeList and you are trying to access ViewState object outside the page. if that is the case you can fetch the datatable in your page itself and then send to GetEmployeeList(...) function or some target function as input patameter.

Thanks,
Hemant

i've improved my solution.
Thanks,
Hemant

Well Thanks Kim.

Add some code here.

Very good answer, straight to the point. My 5

It would be more better if you would have marked the function as "static". but good solution anyway.

--Hemant

Add some code. like .aspx markup shoing your drop downlists and radio button grouping

Certainly its a good link.. who voted down. My 5 too.

Are you able to build it successfully?
Are you able to run it without debugging?

--Hemant

"Any suggestions to free up the memory would be greatly appreciated" how will you answer this?

But the singleton pattern uses "static".

Check my updated solution.
Thanks,
Hemant

Forgot to vote for right answer :). My 4.

Regards,
Hemant

@cuteband is asking you to check and update the ValidationRequest attribute in .aspx page's Page directive i.e.
<%@ Page Language="C#" AutoEventWireup="true".... %>

that means the markup of your .aspx file

hope it's clear now.

Thanks,
Hemant

Welcome. Glad i could help :)

Thanks,
Hemant

Hello Manoj,

1)
A request, whenever you are posting such question add some code to it working/not working condition, for example in current question if you would have pasted .aspx markup containing modalpopup and asp:button declaration it would have helped others to answer it quick.

In absence of code the helper has to write it on his own compile/test it send it to you like @Mahendra.p25 did, and it takes a lot of time. If you would have given some sample lot of people would have tested suggestion on that code only that would have saved lot of time.

2)
People helping here understand your situation that you are going through a problem and try their best to provide a solution and if they do that you should also respect the help they are providing. And there are other ways to tell was the answer helpful and not.

Hope you will take care of this and wish that you will get best answers to your question.

Thanks,
Hemant

hello sunder.
can you send me the fiddler traces of both successful and unsuccessful transaction.
you can save the sessions from Fiddler > File > Save > All Sessions
i'll try to compare what are you getting in both web requests. you can check for the sensitive information like password. you can examine the request with Inspector (right page second tab) in that there are lots of tab you can click on text/xml to see if there is any password parameter being passed if not you can send me the saved session. you can also use a dummy gmail account if you have any.

usually in fiddler, if you receive a failure the web request become RED and if successful you get 200 as success confirm that also.

Regards,
Hemant

I've updated my solution. plz check

You dont need to set AutoPostBack property that belongs to ASP.NET server controls and you are working with WinForm application.

Wow. nice link. My 5

Nice article and nice answer. My 5

To the point. simple and clear. My 5

you are right. i just copied the code he has pasted and did some refactoring and posted the refactored code.

I believe as a beginner he dragged and dropped the combobox on form and double clicked it, it created a default event handler for that control and because the default name was comboBox1 he got the event name appended to that ID only. Later he changed the combobox name to cboReg.

Thanks for the for the vote SA.
Regards,
Hemant

try this suggestion
http://www.gamedev.net/topic/270670-pinvoke-callback-access-violation/

I've improved the solution with the links taking about .net possibilities of sending attachments with SOAP.

Thanks,
Hemant

Your question title and its detail must show what you "want".

You are welcome.
In case you find the proper solution please update your question so that other can have benifit from it.
Regards,
Hemant

Hey.. don't be. But when you find the answer please update this question what was the problem and what was the solution. It will help others to understand possible failure and its solution for such a scenario.

Regards,
Hemant

which part of the code does "Fill in Background"?
what he wants is:
1- fill first 100 records and show it to user
2- when it is in front of user rest of the data is being filled in background

Thanks,
Hemant

My bad i didn't pay attention to "i have found the control" thing but to the title "How to Find Control in FormView ItemTemplate". What type of answer do you expect with such a title?

Anyways .. in what event are you fetching the gridview control.. you can do this in Item_created event of formview, just make sure you are not binding formview after binding gridview otherwise it will override gridview.
you can also confirm the datasource is getting attached by "Quick watch" ing gvSizePrice's datasource property after gvSizePrice.DataBind();

Please take care of the title next time and down voting an answer.

Thanks,
Hemant

Why don't you tell first what is "scope objects"?

Thank you all. when an Expert vote up for an answer that matters a lot.
Thanks a lot once again.

Regards,
Hemant

@SAKryukov - Yes sir :). i never said "convert XML into base64". "inside XML" - here i was referring to the binary data. And i'm here embedding binary into XML not XML into something.

Thanks,
Hemant

Right.. i liked the answer too. My 5+

thanks butchzn. i just kept "value" member for its default usage i.e. some database field relate usage and the calculation values seperatly.
Anyway Thanks again.

But it is when the Request has control name. What about first request to the page?

Well I just used an example on How to get "base type". I didn't use the baseClassName further and I believe @King Boy is smart enough to understand what to do once he has .GetType().BaseType otherwise the intellisense will tell me what to do next.
Thanks,
Hemant

ohh. i was few seconds late.. :)

Well there are two methods GetObject and CreateObject used to get and create an object. GetObject gets a reference of an object if it's already created and if it is not CreateObject creates new instance. you just need to make your assembly COM visible.

See the below link:
http://www.eggheadcafe.com/community/aspnet/3/10054371/how-to-get-client-mac-address.aspx

To better search you can google:
"accessing .net dll from javascript"

Thanks,
Hemant

1- The MachinInformation.dll must be installed on every client where you are trying to access its properties. I hope you know that.
2- you must create an object at client end before accessing its properties with new ActiveX or Getobject etc. after that only you can access its properties and methods.

Add some code where you are creating an object of the type from this dll at client end.

I'm glad i could help.

Got it buddy but did you get a chance to try with fiddler? if yes did you see any request being made to fiddler from your application?

you can also analyze the code difference between the old build in which the code is working and the current code its not working.

if the sample code is hitting gmail with the same rate.. then yes it should not be supposed to work.

ha ha ha :laugh:.
Exact answer my 5.

hi Sunder,
i know what you meant and I have faced that too but look at the title of your question "sending mails from windows application" what a viewer will assume? the title will attract anyone. i think if it were "Failure sending email in windows appication with gmail" it would be more specific.

next the description says the current code was working earlier and now its not working but its working in some different application. Well that sure says that the problem is not with your code it is something sorrounding your code or application, like you said antivirus. but you've not checked "blocked program list" of your antivirus. That is why you need to give more details about sorrounding.

Well check my suggestion and feel free to comment/reject it but with proper reason.
Thanks,
Hemant

1- did you examine the full stack trace you are getting? did you try finding solution based on error number written?
2- you didn't show code what did you use to send email i.e. object/thrid party tool.
3- "Please help if you know what you are answering" well people here answer that question they read so the better you question is framed and information is provided the better answer you'll get.

Thanks,
Hemant

well i've impvoed current solution have a look at my answer.
Thanks,
Hemant

Exactly.. my 5

yes WCF channel.. right. My 5

Right... i think this should work.

Hello,
First - i'm glad that the suggestion worked.

Second - i request you to add seperate question in seperate thread, because
1- If i'm not able to solve your problem others may not come to your question because it's answered and the title is misleading for your new problem.
2- when other people are looking for similar solution the Title of the problem gets displayed by search engines and again they wont be hitting it because of title.

finally - is editValue_textChanged event is getting fired in popup window? because if that is getting fired than the session value should get set.

Thanks,
Hemant

Right. My 5

your code says 'window.document' but your exception says 'window.opener..'? are you sure?

Did you get any exception when debugging or your code came succefully to the end of this function?
Can you add code
1- where you are invoking this function inside the same form
2- where you are invoking this function from outside class
the code should include any event name like button click etc in which you are invoking this function.

Thanks
Hemant

Thanks Olivier.

I love implicit and explicit casting my 5

Have you written anything in aspx markup for asp:Literal control?
where are you first time adding text to your asp:literal?
is the text appearing in marquee? i assume when you say not scrolling the text is appearing but not scrolling.

you are welcome sir.

@Derek1214 - if the answer has helped you always mark it as answer and vote for it. It helps other to understand similar issues and their solutions.

thanks

@saxenaabhi6 is right.

My 5 to the accurate answer.

When you have a master page or some panel for the child controls, at client side the child ID is appended to Parent IDs

for example parentPanelID_secondParentID_cbAddress. you can confirm it by simply clicking "View source" in your web browser and checking for control's ID.

Thanks,
Hemant

Welcome.

Please donot add code in seperate solutions every time you can edit your question or "Add comment" to a comment or click on Improve solution link.

Thanks Ralf, please add the markup/code where you have added Checkboxes to the treeview

@nbgangsta why dont you provide some code to let others see what have you written and what could possibly be wrong.

Provide some code to better understand the issue and fast solution. For example how have you added checkboxes to treeview control

Can you provide more code you've written in the .aspx /winform ?

Can you provide some code with which you are trying this?

Please clarify: when you are saying accessing user control are you saying adding it directly to the codebehind and accessing it at runtime?

When you are saying particular column do you mean you want to add it to gridview or some data control?

Set privileges for different user? what does that mean? is it like you want to hide/show based on the user logged in to the page?

Please check my updated solution

Whoever has down-voted can give a proper solution?

See the updated answer it has the code.

My question remains same have you implemented TemplateField and custom control class with INamingContainer?

you dont have to implement any method of INamingContainer bcz it doesn't contain any.

Now you must be aware of event bubbling your ImageButton should raise the event to gridview so it can understand that something has raised and need to catch up.

Pleae do one thing try adding a grid view to some aspx page and in the code behind of that page add your template field to any column and see if it is raising. don't forget to implement TemplateField class with INamingContainer. put some point in click event of imagebutton.

provide code for templatefield class also

I like the answer exact to the point & helpful. My 5

Did the above answer helped?

I agree.

Happy to help :)

Happy to help :)

Thank you.

Well the question was, will it hit or not. please read/post the question carefully before voting.

Yes very good article My 5 too

Well this is because filterHistory is a subclass of FilterHistory so if you want to use it you need to use it like that Filterhistory.filterHistory.

DRNimnull showed you a way to accomplish what you want to achieve.

please provide some code to better understand what you are doing. For example what have you written in button_click and page_load.
Thanks,
Hemant

Hello Mukesh,
Edraw has provided a helpful documentation, i hope you have covered all the points stated

http://www.edrawsoft.com/docs/excelvieweruserguide.pdf

page No. 37

Thanks,
Hemant

can you provide some more info like the font name, some code to show how are you passing data to iTextSharp?

Please do some research and post questions only in case of any issue. you posted similar question few minutes before for itextsharp.dll.

you just need to extract html from gridview and pass it to pdfsharp to convert html to pdf. Remember HTML to PDF

You need articles before answers. there are lots of articles on the topics. please post specific question.

hi suhail,

are you getting something like below rendered for paging datalist in the webpage generated?:
a id="dlPaging_ctl01_lnkbtnPaging" href="javascript:__doPostBack('dlPaging$ctl01$lnkbtnPaging','')

a id="dlPaging_ctl02_lnkbtnPaging" href="javascript:__doPostBack('dlPaging$ctl02$lnkbtnPaging','')

Hello SHAJANCHERIAN,
I tried your code and it worked perfectly fine at my end. i got the validation failure popup when validation fails, no issue otherwise.

when you say it always return false you mean the validation is coming every time right or you are using the checkAgreement function somewhere else to see the returned value bcz the checkagreement function doesn't return any value and default return value will be false.

do you have any additional code in your page?

Thanks,
Hemant

Well you need to provide full code i.e. how the text box is placed where are you attaching the event handler and so on. The code sample you gave here wont be of any help because if the text chagned event is not getting fired you wont come inside it.

Thanks
Hemant

You can pass huge data for binding and see the usage of GPU with a proper tool. try searching some free tool to check GPU usage. i've not tried but found a link
http://www.filehippo.com/download_gpuz/