Re: Connection string Error VS to Mysql - C# Discussion Boards

N Mohamed rafi20-Mar-22 2:46

20-Mar-22 2:46

thank you so much, I am really mad, now I understand the error you said very well, thanks a lot, please say like this specific. it was a blender mistake

OriginalGriff20-Mar-22 3:26

20-Mar-22 3:26

Details are important in development: you need to look in order to see what is there - or you don't find your problems.

Pointing out the problem specifically doesn't teach you to do that - it teaches you to reply on others to do it for you, and you can't grew as a developer based on others doing the "hard bits"

Debugging code is something we all do every day - often several times a day, and occasionally over a period of several days! So start learning how to fix a problem: gather evidence on what is happening, compare that with what you expected, and ask yourself "what do I need to know to find out why?"
Then look for that: form an idea as to why it failed, and make a prediction as you what that implies. Then check that - the debugger is a good tool for that - and see if the way you expected the fault to happen checks out.

Asking others without doing that doesn't help you, not in the long run - it just makes you more dependant on others to fix your problems, and that wastes time and make you look worse than you are.
Have a go with the next one, and see how far you can get - it's not as difficult as it sounds if you just think carefully!

"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!

N Mohamed rafi20-Mar-22 3:46

20-Mar-22 3:46

Ok sir

N Mohamed rafi20-Mar-22 2:47

20-Mar-22 2:47

pls suggest me i dont know how to mark this thread as solved?

N Mohamed rafi20-Mar-22 3:09

20-Mar-22 3:09

Warning also showing that

CS0414: the field form1.ID is assigned but its value is never used

CS8618 Non nullable field adapt must contain non null value when exiting constructtor consider declaring the field as nullable

using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Configuration;
using System.Windows.Forms;
using System.Data;
using System.Drawing;
using System.Threading.Tasks;
using MySql.Data.MySqlClient;
using System.Data.SqlClient;

namespace Basic
{
public partial class Form1 : Form
{
MySqlDataAdapter adapt;
int ID = 0;
public Form1()
{
InitializeComponent();
DisplayData();
}

private void DisplayData()
{
string connectionString;
MySqlConnection cnn;
connectionString = @"Data Source=localhost;Initial Catalog=testDB;User ID=root;Password=mysql";
cnn = new MySqlConnection(connectionString);
DataTable dt = new DataTable();
adapt = new MySqlDataAdapter("select * from employee", cnn);
adapt.Fill(dt);
dataGridView1.DataSource = dt;
cnn.Open();
cnn.Close();
}
private void ClearData()
{
textBox6.Text = "";
textBox7.Text = "";
textBox8.Text = "";
ID = 0;
}

Connection string Error VS to Mysql

Dave Kreskowiak20-Mar-22 4:51

Dave Kreskowiak

20-Mar-22 4:51

You're not listening, and i'm not even entirely sure you even read entire replies to you. YOu're just looking for copy'n'paste code without any work on your part, that's where the problem lies.

Where did those "AND" clauses come from? They're not in the SQL statement I wrote, and they are not needed at all since an ID uniquely identifies records.

Asking questions is a skill
CodeProject Forum Guidelines
Google: C# How to debug code
Seriously, go read these articles.

Dave Kreskowiak

N Mohamed rafi18-Mar-22 20:32

18-Mar-22 20:32

I want to insert table in db and make connection to mysql to vs.

Error for below code is:
System.NullReferenceException: 'Object reference not set to an instance of an object.'

System.Configuration.ConnectionStringSettingsCollection.this[string].get returned null.

using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Configuration;
using System.Windows.Forms;
using System.Data;
using System.Drawing;
using System.Threading.Tasks;
using System.Data.SqlClient;

private void button6_Click(object sender, EventArgs e)
{
string id = textBox6.Text;
string name = textBox7.Text;
string salary = textBox8.Text;
textBox6.Text = "";
textBox7.Text = "";
textBox8.Text = "";
string query = "INSERT INTO employee VALUES(@employee_id, @employee_name, @employee_salary)";
string constr = ConfigurationManager.ConnectionStrings["constr"].ConnectionString;
using (SqlConnection con = new SqlConnection(constr))
{
using (SqlCommand cmd = new SqlCommand(query))
{
cmd.Parameters.AddWithValue("@employee_id", id);
cmd.Parameters.AddWithValue("@employee_name", name);
cmd.Parameters.AddWithValue("@employee_salary", salary);
cmd.Connection = con;
con.Open();
cmd.ExecuteNonQuery();
con.Close();
}
}
}

Error for below code is:

System.Data.SqlClient.SqlException: 'A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)'

private void button8_Click(object sender, EventArgs e)
{
{
string connetionString;
SqlConnection cnn;
connetionString = @"Data Source=LAPTOP-NDOAR92R;Initial Catalog=testDB;User ID=root;Password=mysql";
cnn = new SqlConnection(connetionString);
cnn.Open();
MessageBox.Show("Connection Open!");
cnn.Close();
}
}

OriginalGriff18-Mar-22 21:04

18-Mar-22 21:04

Read the error message, it is not only explicit, it tells you what to do to fix it:

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)

This may help: Simple SQL Connection String Creation[^]

N Mohamed rafi18-Mar-22 21:08

18-Mar-22 21:08

ok sir please tell step procedure i am very new to it. i don't know to correct it please help me

modified 19-Mar-22 3:19am.

OriginalGriff18-Mar-22 21:17

18-Mar-22 21:17

1) DON'T SHOUT. Using all capitals is considered shouting on the internet, and rude (using all lower case is considered childish). Use proper capitalization if you want to be taken seriously.

2) How do you expect me to tell you that step by step, given that I can't see your screen, access your HDD, or have a browse around your network? Did you read the link I gave you?

N Mohamed rafi18-Mar-22 21:27

18-Mar-22 21:27

I don't understand that link sir, please send some more article pages

OriginalGriff18-Mar-22 22:35

18-Mar-22 22:35

What part did you not understand?

Let's take the instructions one by one...

Quote:
Create an empty text file somewhere on your hard disk, called "myfile.udl".

Have you done that?

N Mohamed rafi18-Mar-22 22:51

18-Mar-22 22:51

Created sir this is the location sir D:\Official\ASP.NET\Projects\Basic

After that what i have to do sir?

OriginalGriff18-Mar-22 23:07

18-Mar-22 23:07

The link gives teh next instruction:

Quote:
Double click the file, and the "Data Link Properties" dialog will open:

Did you do that?

Do you get where I am going with this? Or do I need to copy and paste the whole Tip sentence by sentence as a separate reply to check you have done it?

N Mohamed rafi18-Mar-22 23:15

18-Mar-22 23:15

ok sir data link properties opened and i clicked test connection it shows error like Test connection faile because of an error initializing provider invalid authorization specification

then what i have to do now sir?

OriginalGriff18-Mar-22 23:28

18-Mar-22 23:28

Did you follow the instructions between "open the file" and "press the button"?

It's saying that the information you provided for that server / database is not valid: the login name, or password for example.

If you filled in the info from your existing connection string, then that's why that failed as well: you aren't authorised under that login.

We can't fix that, short of coming round to your place and typing on your keyboard - which would cost you a considerable amount of money in time, flights, hotels, taxis, expenses ...
So it's probably a good idea if you find out what your login info should be from the person who installed the DB!

N Mohamed rafi19-Mar-22 0:36

19-Mar-22 0:36

ok sir i will try with correct username pwd and get back you soon

OriginalGriff19-Mar-22 1:14

19-Mar-22 1:14

Richard MacCutchan19-Mar-22 0:43

Richard MacCutchan

19-Mar-22 0:43

Brilliant utility, I could really have done with it yesterday.

N Mohamed rafi19-Mar-22 2:07

19-Mar-22 2:07

In Datalink properties if i click server name refresh it shows empty only sir. how to bring that there i don't know sir. My userid password is userid is root and pwd is mysql but if i enter that it shows error sir on data link properties.

Richard MacCutchan19-Mar-22 2:24

Richard MacCutchan

19-Mar-22 2:24

I am not @OriginalGriff.

Google Map

Luis M. Rojas18-Mar-22 10:46

Luis M. Rojas

18-Mar-22 10:46

Hello,
I am trying this example(and others), but i got the same error on every example. Of course even the error message says: object se.... i do not know why and neither the answer.

On every example i see: the error is always in the same definition.
i am using vs studio 2019

GDirections direccion;

                       var RutasDireccion = GMapProviders.GoogleMap.GetDirections(out direccion, inicio, final, false, false, false, false, false);

                       GMapRoute RutaObtenida = new GMapRoute(direccion.Route, "Ruta ubicación"); //Here the error: Object reference not set to an instance of an object.'

                       GMapOverlay CapaRutas = new GMapOverlay("Capa de la ruta");
                       CapaRutas.Routes.Add(RutaObtenida);
                       gMapa.Overlays.Add(CapaRutas);
                       gMapa.Zoom = gMapa.Zoom + 1;
                       gMapa.Zoom = gMapa.Zoom - 1;

                       contadorIndicadoresRuta = 0;
                       trazarRuta = false;
                       button3.Enabled = true;
                       break;

Re: Google Map

Luc Pattyn18-Mar-22 11:19

Luc Pattyn

18-Mar-22 11:19

direccion es nada!

Luc Pattyn [My Articles]
The Windows 11 "taskbar" is disgusting. It should be at the left of the screen, with real icons, with text, progress, etc. They downgraded my developer PC to a bloody iPhone.

Re: Google Map

OriginalGriff18-Mar-22 21:06