|
After you NGEN'd the resulting .EXE?? Did the problem go away entirely??
You ran the NGEN command line on your resulting .EXE, then you launched that .EXE file. You DID NOT LAUNCH IT FROM INSIDE Visual Studio! Correct??
|
|
|
|
|
|
OK, then it's easy. When you package your application for distribution, you can use something like InstallShield 2012 or better, on your .NET assembly Components, check the box that says ".NET Precompile Assembly". Done.
Why do you think you can't use NGEN??
Doing what that article says is the pain in the ass away to do it and, unless you know what you're doing, you can easily miss assemblies in your application. That methods is showing you how to do it for one assembly, not ALL of your application assemblies.
|
|
|
|
|
I read that using NGEN depend on target machine , and we should use the NGEN on every machine ???
This is what I have found :
"The idea behind NGen is that when your application is installed on the target machine, the JIT is triggered to compile our entire set of managed assemblies, and generate a native image for the application. Afterwards, when the application is launched, the CLR will make sure to load the correct native image from the disk, and so avoid unnecessary jitting
The problem with NGen is that it's quite complicated to use, and if we are really looking to avoid performance penalties during our application&'s initialization, we will have to spend more of our valuable time in order to register our assemblies in the GAC, correctly set our DLL's base addresses in order to avoid rebasing, etc"
it's correct or I read the wrong article ?
And as alternative to the previous code , I have found another code that load all the assemblies , but again I don't know how to use it :
public static void ForceLoadAll(Assembly assembly)
{
ForceLoadAll(assembly, new HashSet());
}
private static void ForceLoadAll(Assembly assembly,
HashSet loadedAssmblies)
{
bool alreadyLoaded = !loadedAssmblies.Add(assembly);
if (alreadyLoaded)
return;
AssemblyName[] refrencedAssemblies =
assembly.GetReferencedAssemblies();
foreach (AssemblyName curAssemblyName in refrencedAssemblies)
{
Assembly nextAssembly = Assembly.Load(curAssemblyName);
if (nextAssembly.GlobalAssemblyCache)
continue;
ForceLoadAll(nextAssembly, loadedAssmblies);
}
}
Thank you !
|
|
|
|
|
Yeah, you read the wrong article.
The command line for NGEN is simple:
C:\Windows\Microsoft.NET\platform\frameworkVersion\NGEN.EXE /install myexecutable.exe
Really? How hard was that?
You run it for each executable and .DLL in your application.
Now, if you set the option in the component in your installer, you don't have to worry about the command line at all. The installer does it for you!
|
|
|
|
|
Thank you !
I understand that the only existing option for you is NGEN.
Anyway thank you !
|
|
|
|
|
No, it's the option that works in 99% of cases.
I don't know about you, but I do my JIT'ing once, at install time, not on every launch of my code.
|
|
|
|
|
Ok but a normal exe file ( without using NGEN ) do JIT'ing on first start of a form with these controls ( but on every time I use the application ) .Now I want to use a code that do this process on every time that I use the application , but on a fixed point of execution ( for example on login page) and not when the forms are open.
Anyway , this is only my opinion. But it's so difficult for you to show me a way how to use the code for doing this process. I want just to try both the alternatives.
Thank you !
|
|
|
|
|
alejx wrote: Ok but a normal exe file ( without using NGEN ) do JIT'ing on first start of a form with these controls ( but on every time I use the application )
No, it doesn't. The JIT happens once, the first time the code is executed. A native image is generated and put into the native image cache.
When you run the code from inside Visual Studio, that native image only lasts for the one time you run the project. When you run the project again, a new .EXE is generated and new native images are generated as the code is executed. This happens every time you run the project from inside Visual Studio.
alejx wrote: But it's so difficult for you to show me a way how to use the code for doing this process. I want just to try both the alternatives.
The reason I don't recommend do it that way is because if you don't understand the code and why it works you can't support it in the future. What if the code no longer does what you assume it's should be doing anymore? What are you going to do then??
That's why I don't recommend you use it.
|
|
|
|
|
Ok I try to use NGEN.
But I have a last question ( that maybe has nothing to do with this case but maybe yes ).
I'm thinking to use a code protection software , (like .Net Reactor) to protect my job.
This software implement these protections to exe file :
NecroBit Protection
Native Code generation
Obfuscation
Control Flow Obfuscation
String Encryption
Anti Tampering
Resource Encryption and Compression
Dependency Merging
Now , if I protect the .exe file , after is possible to use NGEN ?
Thank you !
|
|
|
|
|
You're going to have to ask the provider of the software you're going to use.
But, in general, yes, you can use NGEN with obfuscators.
|
|
|
|
|
If I were in your shoes, this is what I would try:
Put some of the DevExpress controls onto the Login form, but make them invisible. This will force them to load, and hopefully your other forms will be much snappier.
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
|
In VB.Net
Any Text Control (TextBox, RichTextBox, etc...)
Is it possible to bold a highlighted/particular text in a control?
Thanks...
I did't do that...
|
|
|
|
|
With a TextBox, you can only set the font and fontweight for the whole string. With the RichTextBox you can set any amount of fonts and font weights to your hearts desire. To set the current selected text to bold, or if it is already bold, set it to normal, you can use something like this :
With Me.rtb
If .SelectionFont IsNot Nothing Then
Dim currentFont As System.Drawing.Font = .SelectionFont
Dim newFontStyle As System.Drawing.FontStyle
If .SelectionFont.Bold = True Then
newFontStyle = currentFont.Style - Drawing.FontStyle.Bold
Else
newFontStyle = currentFont.Style + Drawing.FontStyle.Bold
End If
.SelectionFont = New Drawing.Font(currentFont.FontFamily, currentFont.Size, newFontStyle)
End If
End With
Hope this helps
Everyone dies - but not everyone lives
|
|
|
|
|
Thanks a lot, your code works perfectly...
I did't do that...
|
|
|
|
|
Glad to help.
Everyone dies - but not everyone lives
|
|
|
|
|
hansoctantan wrote: Any Text Control (TextBox, RichTextBox, etc...)
Is it possible to bold a highlighted/particular text in a control?
No. You'd have to paint that part yourself.
Bastard Programmer from Hell 
If you can't read my code, try converting it here[^]
|
|
|
|
|
Hi all,
I was just wondering;
From explorer you can right click on a file and select the print option.
This will print the document (Word, Excel, Visio etc).
How can I call this print option ?
Why you may ask?
Well this option will print any document that has an associated applicaion with it.
And it handles the document extension.
That is, you don't need to code for the specific file type.
Any thoughts ?
cheers,
dgoogle
|
|
|
|
|
Try something like this:
Dim psi As New ProcessStartInfo(pathToTheFile)
psi.Verb = "Print"
Process.Start(psi)
dgoogle wrote: Visual Studio 2113
2113?! Nice to see Microsoft are still going in 100 years! 
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
I am a new programmer in visual basic 2010. I was trying to upload picture to a website such as www.tineye.com. I have placed a button in the form and my goal is when i click on the button, the picture which i saved in my desktop automatically gets uploaded in the website. So, i was trying to use the uploadfile() function. So, please can anyone help me how i can use the uploadfile() function. The file i am trying to upload is a Jpg file.
|
|
|
|
|
|
Why have you posted the same question twice?
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
I am a new programmer in visual basic 2010. I was trying to upload picture to a website such as www.tineye.com. I have placed a button in the form and my goal is when i click on the button, the picture which i saved in my desktop automatically gets uploaded in the website. So, i was trying to use the uploadfile() function. So, please can anyone help me how i can use the uploadfile() function. The file i am trying to upload is a Jpg file.
|
|
|
|
|
Hi.
I need a WYSIWYG control with buttons (bold italic ...) that can print on a place on the paper where I want (XY coordinates). I didn't find anything that print. So I create the control myself, but I can't find how to print my text where I want. There are some examples that do print, but it's always on top of the paper and no way of adding something else.
You can see what I already have here
As you can see I want the option to hide some or all buttons.
The idea is that I can add text to an already existing application on the page and also with converting to html for webpages. That text will be on the bottom or on the top of the page
Jan
|
|
|
|
|
The X and Y co-ordinates are used to position the text on the page. You need to calculate them according to where you want your text to start. You then adjust them as you print moving across or down the page as necessary using the font size to calculate position. There are sample articles on printing in the CodeProject Articles section[^].
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
