|
Member 7989122 wrote: So you don't have a president where you live?
In Spain there are both, president and king.
In Germany only president.
But, if you see the "subthread":
- I asked if New York is for him a little city
- He answered that if it virus and my president continue like that it will
- I think he confused me with the OP, so I make the joke of giving coffee and asking "since when am I a US-Citizen?" because I am not and he knows it (or I thought he knew), and nothing that my president (spanish or german) does will have that big effect in the end size of new york.
M.D.V. 
If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about?
Help me to understand what I'm saying, and I'll explain it better to you
Rating helpful answers is nice, but saying thanks can be even nicer.
|
|
|
|
|
I just wanted to point out that you both made the same mistake:
He assumed you were American
You assumed that he by "president" assumed the US president.
I am quite sure that he did, but he didn't say so, and you were jut as preconcieved about the nationality of the president as he was about the nationality of Nelek.
|
|
|
|
|
Member 7989122 wrote: You assumed that he by "president" assumed the US president.
The central point of the topic was New York, so yes. I assumed we were still speaking about it and hence the US-President.
If it wasn't like that, then my non native speaker status has played with me because I didn't understand it correctly 
M.D.V.
If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about?
Help me to understand what I'm saying, and I'll explain it better to you
Rating helpful answers is nice, but saying thanks can be even nicer.
|
|
|
|
|
Now, now now, Stop picking on to intellectually challenged
A Fine is a Tax for doing something wrong
A Tax is a Fine for doing something good.
|
|
|
|
|
America #1 
|
|
|
|
|
There was a US "spokesperson" on BBC Breakfast News on Friday looking really quite proud as he boasted "The US leads the world in Covid-19 infections".
Let's hope not. 
|
|
|
|
|
We've got so few where I am that we're having to import them.
I'm not kidding. There are helicopters flying past every (subjective) five minutes, ferrying patients into our green and pleasant, previously-uninfected land.
Intentionally taking infected people to uninfected areas?
[Adam Savage mode]
What could Possibly go wrong?
[/Adam Savage mode]
I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
I'm sick of Internet browsers that close themselves when you close all tabs.
Do word processors do this? PDF readers? Any other apps with tabbed interfaces?
And wouldn't it be fun if VS shut down, just because you closed a project?
Leave the window open, you pillocks!
I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
Indeed. All applications should open to an empty environment and then let you open things or not.
|
|
|
|
|
I found myself liking the VS2019 habit of giving you an open/new project screen on start
Real programmers use butterflies
|
|
|
|
|
|
|
What I liked about that was that it was easy to find the option to kill it.
I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
If only there was some way around this.
Social Media - A platform that makes it easier for the crazies to find each other.
Everyone is born right handed. Only the strongest overcome it.
Fight for left-handed rights and hand equality.
|
|
|
|
|
Keeping the window open is not an optional "feature" in all of them.
I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
Mark_Wallace wrote: Keeping the window open is not an optional "feature" in all of them.
Think about it. It will come to you.
Social Media - A platform that makes it easier for the crazies to find each other.
Everyone is born right handed. Only the strongest overcome it.
Fight for left-handed rights and hand equality.
|
|
|
|
|
What? Don't close all tabs? Don't use a browser? Don't use a computer? Don't breathe?
None of the above solves the problem. If you don't understand what the problem is, don't pretend to have the solution.
I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
Mark_Wallace wrote: Don't close all tabs?
Bingo. You have solved your first world problem.
Leave the last tab open. Or press Ctrl+T for a new tab and close the existing.
Or heck, write your own browser. 
Social Media - A platform that makes it easier for the crazies to find each other.
Everyone is born right handed. Only the strongest overcome it.
Fight for left-handed rights and hand equality.
|
|
|
|
|
As I said, that does not solve the problem.
Didn't you learn to read the question properly, before starting to write an answer?
Following your method, total nuclear war that kills every living thing on Earth is a solution to the problem of people dying from the coronavirus.
I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
Mark_Wallace wrote: that does not solve the problem.
Then you might want to re-analyze your "problem."
Mark_Wallace wrote: Following your method, total nuclear war that kills every living thing on Earth is a solution to the problem of people dying from the coronavirus.
Your ability to create analogies is as good as your ability to solve your tab problem.
Social Media - A platform that makes it easier for the crazies to find each other.
Everyone is born right handed. Only the strongest overcome it.
Fight for left-handed rights and hand equality.
|
|
|
|
|
ZurdoDev wrote: Then you might want to re-analyze your "problem."
Because you don't understand it?
That's your problem, not mine.
I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
I really don't have any big troubles with this issue - but now that I think of it...
Why do we have this concept of moving an object into a window for handling it? Why don't we simply execute the program, or look at the document, or whatever, right there where it resides? In the old days, before computers, you never moved a book into a reader. If you made notes on a pad (of paper), you didn't move it into a writer. Maybe you put the pad on your desktop, but there wasn't any "window" that existed before and after to put it into.
Some pre-PC electronic things did need a box, like a telephone. But when you put the receiver back on-hook after a conversation, the phone had no function; it didn't stay open for you to do something else with it. Conceptually, the phone didn't have any function by itself; if you conversation partner had been in the same room, you could have had exactly the same conversation without using the phone. So what is it there for? It is just that we have to use something to help us of we are too far apart, but the best would be to manage without it.
So it is with the window as well. If we cold just handle the program or document or whatever by itself, get rid of that window frame, wouldn't that be much better? Would you really prefer to have your documents on microfiche cards so you can't read them without turning that huge microfiche reader on, fit the card in the holder, and navigating to the image of the page you want to read, rather than reading the physical document?
The old MDI - Multiple Document Interface - certainly was no long-lasting success. MS Office switched to a model where each document lives by itself on the desktop, at least graphically. But not internally! You can't run one (stateful) dialog in one document and another one in another document; you have to complete the dialog with one document before you can talk to the other. That really annoys me much more. Lots of other state info is shared between conceptually different documents.
Tabs was sort of a successor to MDI, but you can't see two documents side-by-side in the tab model. But some systems, such as Notepad++, lets you pull a tabcard out of the pile - and then it runs completely separately, without sharing state with the others. Pulling a tab out of the stack has become common in web browsers as well, but I believe that the common way of handling it is still keep significant state info in a common root process; even the tab pulled out is run as a subprocess of the same root as the other tabs. I wish it would be a fully independent process, similar to the Notepad++ solution.
If done properly I would prefer each object to be managed on the desktop line a physical desktop. I don't see why I should have empty window frames (or photo frames) laying around on my office desk. So why should I want than on my PC desktop?
|
|
|
|
|
I'll try to not notice that you appear to be saying that you would like the operating system to handle absolutely everything, and give you a much more appropriate real-world example:
When you take the last tabbed file out of a filing cabinet or file folder, does the filing cabinet or file folder cease to exist?I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
(sorry for being so late responding - I had overlooked the reply from you)Mark_Wallace wrote: you would like the operating system to handle absolutely everything
Certainly not. That is similar to the recent discussion about the value of OO. When you make a huge program system, you may put all the functions for manipulating all the different kind of data into a single basket. Or you may associate data objects with suitable tools for manipulating them.
I am much in favor of associating a document with a document editor, a music file with a music player etc. Not as an operating system, but as a tool. An operating system is like a house where I can find the hammer, the CD player, the bread knife or whatever tool I need, but there are not the house, and they are not defined by the house.
For your analogy: The traditional way to use software is to pick up the tool, the hammer, and then see if can hit a nail by it. You've got the tool as the primary object, with e.g. the document as more or less secondary, non-primary "data" that is there just for the tool to have something to work on. That is what I have concluded to be backwards.
A storage facility like a cabinet or folder is a first class object by itself. It may contain other objects, dynamically changing, or as more or less fixed components. You've to operations to manipulate a cabinet or folder object, e.g. placing documents there. That is similar to operations to add words to a document. A document exists as an object even if it has no words in it. The cabinet exists even if it has no documents in it.
The problem is that you consider the editing function to be a first class object. You treat it as if it were a cabinet. But the cabinet is not a function to operate on documents. You see the editor functions as an object only because you see the executable file as something on your disk. Conceptually, it isn't - is is a set of invokable actions. There is a difference between actions and objects. Imagine the different actions you can do with your car: Those actions do not exist as an "object". When they are not invoked, they exist primarily in you head as the ability and training you've got that enables you to drive that car - but that isn't an object. When I see a car that is moving, I see a car where the driving function is being invoked. I do not see a driver that handles one or more cars as data.
I want to move the focus from the executable file over to the document (or whatever). The nail being hammered in is conceptually essential - the hammer doing it is not. And when you focus on the document (or nail), you see four separate documents (or nails being hammered in), not one "Insert word" function that operates on a set of four documents. You do not put four nails into the hammer, you hammer in one nail at a time, and you might as well use four different hammers. There is no reason to let the tool create any bonds between the four documents, or the four nails.
You can view a .docx file an object on which you can apply editing functions. Separate .docx are presented in separate windows; there is no way to put them all into a single "editor window". Unfortunately, behind the curtains, there is a mess, making operations on the documents not fully independent. In Notepad++ you can pull .txt documents out to run in fully separate processes (but you have to accept to start up with the documents in a pile in a single process). I don't know any way to run MS-Word as similarly independent processes, but I wish there were. Then I could view a document as an object with editing functions, rather than seeing a editor tool where the data it handles as secondary.
|
|
|
|
|
Member 7989122 wrote: For your analogy: The traditional way to use software is to pick up the tool, the hammer, and then see if can hit a nail by it. You've got the tool as the primary object, with e.g. the document as more or less secondary, non-primary "data" that is there just for the tool to have something to work on. That is what I have concluded to be backwards.
That's where we diverge.
If I have a nail, I pick up a hammer; a screw, a screwdriver.
But I don't put the tool down when I've finished hammering in one nail or screwing in one screw; I keep hold of the tool and process any other nails/screws that I want to process, and only put the tool down when I've finished.
Similarly, if I want to work on projects, I'll double click the project file, which does the equivalent of picking up the tool to process it for me, but when I've finished working on that project, it's my decision whether to put the tool down or to open another project to process.
It's the same with any tabbed interface -- click an Internet link, it picks up the browser tool for you; close that page, and you should have the option to "process" other pages (which is usually what you want to do) or put the tool down.
It's not the hammer's job to decide that you don't want to bang in any more nails.
I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
