|
Yes, VS.NET does create the interop assembly but you never said you added such a COM reference and I've learned to assume nothing in this forum. After all, you did give the VB6 method signature and said you were trying to call it.
The data type (not C#, but .NET) is a String[] array, as well as is the return value, just as I mentioned previously. The param indeed takes a ref as designated by the address operator, &. More easily, however, would've been to look at the signature that IntelliSense returned, which would've shows the method signature as it is declared. It should look something like this:
string[] MyFunction(ref string[] varNames); When you call it, you must pass an initialized array:
string[] varNames = new string[] {"One", "Two" };
string[] retNames = obj.MyFunction(ref varNames);
Microsoft MVP, Visual C#
My Articles
|
|
|
|
|
Heath Stewart wrote:
Yes, VS.NET does create the interop assembly but you never said you added such a COM reference and I've learned to assume nothing in this forum. After all, you did give the VB6 method signature and said you were trying to call it.
The data type (not C#, but .NET) is a String[] array, as well as is the return value, just as I mentioned previously. The param indeed takes a ref as designated by the address operator, &. More easily, however, would've been to look at the signature that IntelliSense returned, which would've shows the method signature as it is declared. It should look something like this:
Yes...you are right...sorry ".Net", not C#. 
Sorry I didn't mention the reference...this is my 1st time playing with COM and that is the only way I knew how to do it. So I just assumed that was assumed. If that makes sense.
Thanks for your answer, but if you go back to my original post, you'll see from my code examples that was exactly where I started. So...full circle?
There are only 10 types of people in this world....those that understand binary, and those that do not.
|
|
|
|
|
I suppose we have. Is there any possibility you can send me the VB COM library? I don't need the source. If you have configured CodeProject to send email when someone replies to you, my email address will be above.
Microsoft MVP, Visual C#
My Articles
|
|
|
|
|
Thanks for the offer. It is sent.
There are only 10 types of people in this world....those that understand binary, and those that do not.
|
|
|
|
|
Ok...I got it (what a pain)! I want to post the answer here for posterity in case somebody else has a similar problem in the future. For the record, I found the answer in a book a co-worker lent me (COM and .NET Interoperability by Andrew Troelsen).
The VB function signature:
<code>Public Function MyFunction(varNames() As String) As String() showed up as this in the assembly like this:
.method public hidebysig newslot virtual
instance string[]
marshal( safearray bstr)
MyFunction([in][out] string[]& marshal( safearray bstr) varNames) runtime managed internalcall
{
.custom instance void [mscorlib]System.Runtime.InteropServices.DispIdAttribute::.ctor(int32) = ( 01 00 15 00 03 60 00 00 )
.override COMInterface._COMClass::MyFunction
}
The problem was this assembly (and intellisense) was telling it it had to be a safearray and apparently it just wouldn't take a string[]! Not even if it was instantiated on initializaation like:
string[] varNames = new string[] {"One", "Two" };
The intellisense was telling me it had to be a "System.Array", not a string[]!
What needs to be done is not a "cast", but intantiating a System.Array and set it equal to the string array that was initialized and then pass in the ref to that array.
This was the way to get it working was:
COMInterface.COMObj oCOMObject = new COMInterface.COMObj();
string[] sNames = new string[] { "ProjectName" };
System.Array oTemp = sNames;
string[] sValues = new string[1];
System.Array oTempVals = sValues;
oTempVals = oCOMObject.TheCOMFunction( ref oTemp );
It wasn't intuitive....but now, in retrospect, it makes sense. Apparently you have to use the "System.Array" type for the "safearray" that it expects in the assembly, and since it doens't like you to cast it from string[] to System.Array, you have to just create an instance and set it equal.
There are only 10 types of people in this world....those that understand binary, and those that do not.
|
|
|
|
|
Hi guys,
I have one user control implemented in .net (c#) and im trying to call it from a form in visual basic. the big problem is i cant add that control to vb designer, i just can add it as reference, so when the vb form comes up i cant see my control. i've done all the steps in this link (http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dndotnet/html/callnetfrcom.asp).
does anybody any hint, thanx in advance.
|
|
|
|
|
Make sure you have registered it correctly with regasm.exe /codebase, or set the project option in VS.NET to do so automatically. Also make sure that you DO NOT use AutoDispatch or AutoDual for your ClassInterfaceAttribute - ALWAYS declare your own class interface (implement as first interface) despite what Microsoft says in their docs. In fact, if you read more information about CCWs in other Microsoft documentation, they state as much, warning about using auto-generated interfaces. Always use a GuidAttribute as well, otherwise your VB project won't reference the right typelib next time you build your C# project.
Finally, I have noticed problems before when trying to add controls to VB6 with other work and articles I've done. First trying loading your control in the ActiveX Control Test Container (tstcon32.exe), which should be available from your VS.NET Tools menu if you installed the Platform SDK tools (installed by default). If it doesn't work in there, then you've done something wrong. Re-read the articles you linked or read Nick's at http://www.codeproject.com/dotnet/nettocom.asp[^]. Reply here if you're having problems.
If it does work, make sure you customize VB6's toolbox and add the .NET Control as an ActiveX control, not just a project reference.
Microsoft MVP, Visual C#
My Articles
|
|
|
|
|
You wrote:
If it does work, make sure you customize VB6's toolbox and add the .NET Control as an ActiveX control, not just a project reference.
could u plz tell me how can i do this in vb?
(customize VB6's toolbox and add the .NET Control as an ActiveX control)
thanx alot
|
|
|
|
|
Just right-click on in the toolbox and click "Components...". Find the assembly name (the value you put in the AssemblyTitleAttribute in AssemblyInfo.cs, or the assembly filename if you didn't put one), check it and click okay. If you don't see it, make sure you registered your assembly with regasm.exe /codebase "path/to/file.dll". This will register any COM-visible types, but you should declare your classes, interfaces, methods, properties, and enums appropriately. See Creating a CCW for COM enabled non .NET applications[^] for more information.
Microsoft MVP, Visual C#
My Articles
|
|
|
|
|
hi guys, thanx for your great helps, but im still having problem.
I dont know why but i can insert my control in activex control test container in .net but i have to click implemented categories button then just select .net category.
but in visual basic or even in .net i just can see it as com reference not come component, i cann't add it to tool box!!!
i test this link but this one is the same too, it just shows in references not activex section.
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cssample/html/vcsamCOMInteropPart2Sample.asp
any help really appreciated.
|
|
|
|
|
COM registration - like almost everything else - is in the system registry. Even the categories are nothing more than GUIDs, so you can actually implement a catagory just by adding a GUID to your control's registration. Unfortunately, you can't do this through any attributes. All you could do is add a registration and unregistration method and use the ComRegisterFunctionAttribute and ComUnregisterFunctionAttribute on those methods.
If you just need this for your own development, there are two other things you can do. You can open the VBP project in a vanilla text editor like notepad.exe and add a new component (see the existing lines for examples), save it, then reload your VB project, or you can use regedit.exe to add the catagory like I mentioned above (this shouldn't become a common practice, though, since by implementing some catagories you imply that you support certain interfaces):- Click Start->Run
- Type "regedit" (without quotes) and click "OK"
- Expand HKEY_CLASS_ROOT\CLSID and find the GUID for your component (the class, not the interface, which you should'be attributed with the
GuidAttribute).
- Expand the GUID
- Expand "Implemented Catagories"
- Right-click on "Implemented Catagories" and select "New->Key"
- Type "{40FC6ED4-2438-11CF-A3DB-080036F12502}" (without quotes) and hit return.
- Restart VB and you should now see it.
Microsoft MVP, Visual C#
My Articles
|
|
|
|
|
guys I really appreciate your knowledge,
Im almost done with my component and i can test it in activex container test program and it works great, but i cant add this component to my vb project, i added this {40FC6ED4-2438-11CF-A3DB-080036F12502} for my class component guid in the registry as u told, but i cant still see it in there as com activex control, can u tell me what this {40FC6ED4-2438-11CF-A3DB-080036F12502} exactly does.
thanx alot
|
|
|
|
|
That's the CATID (catagory ID) for the Controls (as in ActiveX controls) catagory. Use oleview.exe to view these different catagories. This tool is also available by default from the VS.NET Tools menu as the "OLE/COM Object Viewer".
Since I can't really see your machine to know if everything is setup correctly, you could always try what I mentioned before: open the .vbp project file in notepad.exe (or some other vanilla text editor) and add the line manually, so it would look something like this:
Object={YOUR CLASS GUID}#MajorVersion.MinorVersion#0; Filename.dllIt should then appear in the toolbox.
Microsoft MVP, Visual C#
My Articles
|
|
|
|
|
it wroks and thanx very alot.
I was wondering if you say me what can do to make this control visible for all of component client container, sometimes i need to use this control in vb, vc,delphi,... , what i have to do to make it like the other activex control which commin up when you open the component reference form in the vb or anyother language.
and another isues is one i've created one tlb file from that component, but now i cant remove it, i closed every thing, do i need to unregister it,,how !!!
thanx very much
|
|
|
|
|
As I mentioned a while back, you can implement static methods that are attributed with ComRegisterFunctionAttribute and ComUnregisterFunctionAttribute that use the Microsoft.Win32.RegistryKey to do this manually. These functions are called in addition to normal registration of the class.
If you can't release the typelib (.tlb file), you need to remove ALL references to objects defined by the typelib in your project and remove the control from the toolbox.
If you have questions about how COM objects in the VB6 IDE, please jump over to the VB forum.
Microsoft MVP, Visual C#
My Articles
|
|
|
|
|
I just went through this last week (here at work).
Here is the MSDN article that gave me the proper example I needed.
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/csref/html/vcwlkcominteroppart2cservertutorial.asp
You must generate the GUIDs with regasm like Heath mentioned. From VS go to Tools menu and select "Create GUID".
There are only 10 types of people in this world....those that understand binary, and those that do not.
|
|
|
|
|
Actually, regasm.exe only registers the assembly. You need uuidgen.exe or a plethora of alternative programs / extensions. You're right about where to generate a new GUID from VS.NET, though.
Microsoft MVP, Visual C#
My Articles
|
|
|
|
|
Hi there,
I'm currently working on a MSHTML Interface. The implementation of the IDocHostUIHandler and also the editing in general work quiet well for me. The only problem I got is the FilterDataObject method. I can't suppress any data-actions although the method is invoked.
Has anyone a working example of the FilterDataObject implementation that actually filters datatypes?
Many thanks in advance!
Stefan
|
|
|
|
|
|
Yes I read the article, a very helpfull article in general but very short about this particular problem. As I stated above the invokation without filter works fine
Cheers
Stefan
|
|
|
|
|
Your IDataObject parameters - are you sure they are the COM interfaces and not the .NET interfaces (System.Windows.Forms.IDataObject)? These two interfaces are VERY different and won't be marshaled correctly. You must make sure that you use the IDataObject from COM, which should also have been defined when generating your RCW for the typelib containing IDocHostUIHandler (mshtmhst.dll) (and additional typelibs if forward-declaring additional interfaces from other typelibs).
Microsoft MVP, Visual C#
My Articles
|
|
|
|
|
Yes, I am using MsHtmHstInterop.IDataObject - and yes you are right using System.Windows.Forms.IDataObject is lethal...
Thanks
Stefan
|
|
|
|
|
Okay, then the "no-offense-meant,-I-have-to-ask" question: have you debugged your app and stepped through your implementation of FilterDataObject? What appears to be happening in there?
Microsoft MVP, Visual C#
My Articles
|
|
|
|
|
Sure, you have to ask. When I step through the implementation the [in] IDataObject is valid and also the [out] IDataObject is either null or valid if I try to replace, but the return value S_OK, S_FALSE (which I have to set according to the MSDN) has no effect at all (either way & all combinations).
|
|
|
|
|
Is the method return Type an int or similar? If you generated this automatically, it should be void. In the case that you can't (or don't want to) redefine this yourself, you can throw a COMException with the result code. It seems weird, I know, but it works. So, to send S_FALSE (S_OK doesn't require this since not throwing an exception is the same as returning S_OK unless the function signature is defined correctly), throw new COMException(null, 1). Hopefully this works for you.
Microsoft MVP, Visual C#
My Articles
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
