Re: asking for system tray application - C# Discussion Boards

Re: DragDrop to a native window?

13-Jan-04 5:07

Drag and drop is not trivial to implement. .NET exposes this in a rather easy-to-use method that encapsulates all the native functions, interfaces, structs, and enums/constants. As you can see, though, not every control in .NET supports drag and drop, either. There is a lot that has to be done in order to do this for native windows. There is more documentation in the Platform SDK at http://msdn.microsoft.com/library/en-us/dnanchor/html/anch_WinShell.asp[^]. Specific interfaces and functions to look at are IDropSource, IDropTarget, IDataOject, and DoDragDrop. These are all from the Platform SDK, not the .NET Framework SDK (I only mentioned because a couple of these have similarly named equivalents in both). Those four interfaces and functions - along with the documentation about them - should be enough to get you started.

On a side note, so long as the clipboard formats are supported by both the drag source and the drop target - regardless whether either one is managed or native - and the data is formatted correctly you can drag and drop between windows.

Finally, if you are looking to add drag-n-drop support to your native Windows, first read about the Windows Shell and drag-n-drop interfaces from the link I gave you and continue in the Visual C++ or ATL/WTL/STL forum.

TuringTest113-Jan-04 5:55

TuringTest1

13-Jan-04 5:55

Heath, thank you for the great references (as usual!).

________________________________________

Gosh, it would be awful pleas'n, to reason out the reason, for things I can't explain.
Then perhaps I'd deserve ya, and be even worthy of ya..
if I only had a brain!

asking for system tray application

azusakt12-Jan-04 16:25

azusakt

12-Jan-04 16:25

Hello,

I would like to improve my application; hope it can minimize to system tray, and appear again if double clicked on system tray icon.
I know I should use notify icon, but how can I catch the minimize event of my application and tell it to minimize to system tray?

I just hope to find a good example of using notify icon, could any one help and teach me?

Thank you

Re: asking for system tray application

Jeff Mackie12-Jan-04 17:16

Jeff Mackie

12-Jan-04 17:16

azusakt,

Well it may seem that the application is actually minimizing into the system tray. But what happens is that when you minimize your application you actually hide it. Then when you double click on the notify icon, you show the application in its normal state.

// This hids the application when Minimized. (Forms resize event)
private void frmMain_Resize(object sender, System.EventArgs e)
{
if (this.WindowState == FormWindowState.Minimized)
{
this.Hide();
}
}

// Show the application when doubleclick event happens (Icon Try Double Click Event)
private void nicTray_DoubleClick(object sender, System.EventArgs e)
{
this.Show();
this.WindowState = FormWindowState.Normal;
}

Hope this helps.

Re: asking for system tray application

azusakt12-Jan-04 17:51

azusakt

12-Jan-04 17:51

Thanks for you reply Jeff,

I've done something like your code, and it works, but a little bit strange effect. I set the form's ShowInTaskBar property to false, and I used:

private void notifyIcon1_DoubleClick(object sender, System.EventArgs e)
{
     this.Show();
     this.WindowState = FormWindowState.Normal;
     this.notifyIcon.Visible = false;
}

private void ProgressBarForm_SizeChanged(object sender, System.EventArgs e)
{
     if(this.WindowState == FormWindowState.Minimized)
     {
	this.Hide();
	this.notifyIcon.Visible = true;
     }
}

It works like your expection, but the visual effect looks strange,; it firstly minimized to left bottom corner and then hide, that means always flash to left corner and then restore. How can I minimize it directly to system tray?

Re: asking for system tray application

Heath Stewart13-Jan-04 4:53

returning when inside a lock - is it safe?

13-Jan-04 4:53

Through so much unbelievable math it's not even funny! Smile | :)

The minimization effect is handled by the Windows, not the application. You have to dig very deep into Windows to override that behavior (if possible) and do all the math yourself to draw the minimizing Window compacting and moving toward the systray icon. I've never seen an application do this - not even from Microsoft.

What I do so most often to combat this effect is to hide the window first, then minimize, or vice-versa to restore (restore then show). This way, you don't see the Window minimize and don't have to worry about such behavior (which I agree looks odd).

Brandon Haase12-Jan-04 15:29

Brandon Haase

12-Jan-04 15:29

I've run into a situation I haven't seen before, and was wondering if someone with a bit more threading experience would like to chime in.

The class IsoCurrencyInfo maintains a collection of IsoCurrencyInfo singletons. The instances of IsoCurrencyInfo class themselves are read-only once created, so by themselves are thread-safe. The trick is keeping the ArrayList container in line. I think I have it nailed, but in doing so I am executing a return statement while inside a lock().

The code works very well under heavy concurrent load Cool | :cool:

, but I can't help wondering "Is this safe?" Is there a better way to structure this method to optimize the locking?

I have adapted the Singleton implementation pattern[^] from Microsoft Patterns & Practices[^].

public static IsoCurrencyInfo GetInstance(string isoCode) 
{
	IsoCurrencyInfo newICI = null;

	if(null == _iciRegistry)
		lock(syncRoot) 
			if(null == _iciRegistry)
			{
				_iciRegistry = new ArrayList();

				newICI = new IsoCurrencyInfo(isoCode);
				_iciRegistry.Add(newICI);
			}
	if(null == newICI) 
		lock(syncRoot) 
		{
			foreach(IsoCurrencyInfo existingICI in _iciRegistry)
				if(existingICI.AlphaCode == isoCode)
					return existingICI;

			newICI = new IsoCurrencyInfo(isoCode);
			_iciRegistry.Add(newICI);
		}
	return newICI;
}

Thanks!
B

Heath Stewart13-Jan-04 4:46

13-Jan-04 4:46

It's completely safe. The lock keyword translates to the following (verifiable if you use ildasm.exe or some other disassembler / decompiler to view the compiled code):

Monitor.Enter(syncRoot);
try
{
  // Do stuff
}
finally
{
  Monitor.Exit(syncRoot);
}

The finally block is always run - regardless of a return or a throw - except when Environment.Exit is called (which unloads the process and the CLR completely, thus it really won't matter that the lock wasn't released because the OS will reclaim any process resources).

Brandon Haase13-Jan-04 16:13

Brandon Haase

13-Jan-04 16:13

Thank you for a solid example. I didn't think of checking my decompiler's output.

scadaguy13-Jan-04 5:23

scadaguy

13-Jan-04 5:23

Brandon,

Returning inside a lock is okay.

I don't necessarily see anything incorrect about your implementation. However, the double-checked locking pattern is essentially useless as you have used it since you'll always be aquiring at least one lock anyway. I would suggest the following code...

public class IsoCurrencyInfo
{
    private static Hashtable _iciRegistry = new Hashtable();

    public static IsoCurrencyInfo GetInstance(string isoCode)
    {
        if (!_iciRegistry.Contains(isoCode))
        {
            lock (syncRoot)
            {
                if (!_iciRegistry.Contains(isoCode))
                {
                    _iciRegistry.Add(isoCode, new IsoCurrencyInfo(isoCode));
                }
            }
        }
        return (IsoCurrencyInfo)_iciRegistry[isoCode];
    }
}

It is important to realize that the Hashtable is the only IDictionary collection that will work as I have used it. This is because the Hashtable can support multiple readers and one writer simultaneously. Likewise, you won't be able to use the same trick with an ArrayList. In this implementation the lock is rarely acquired.

Brian

Brandon Haase13-Jan-04 16:28

Brandon Haase

13-Jan-04 16:28

Bravo!

Based on your code and some thought, I ended up restructuring the entire class. It is smaller, tighter, and a lot faster. My test suite execution time dropped from an average of more than 500ms to less than 200ms; it drops to less than 1ms when I pre-load the singletons. That lock-loop was killing me.

Thanks!
B

remoting access

haih12-Jan-04 15:23

haih

12-Jan-04 15:23

hai everybody... may i know how to write the coding for the log off, reboot and shut down function in C# language. The coding must be able to use own pc so such to control others pc... I got a sample code which is written in VB6 as below:

Private Sub butLogOff_Click()
SystemFunc "logoff"
End Sub

Private Sub butReboot_Click()
SystemFunc "reboot"
End Sub

Private Sub butShutdown_Click()
SystemFunc "shutdown"
End Sub

Private Sub SystemFunc(task As String)
Const CONST_SHUTDOWN = 1
Const CONST_LOGOFF = 0
Const CONST_POWEROFF = 8
Const CONST_REBOOT = 2
Const CONST_FORCE_REBOOT = 6
Const CONST_FORCE_POWEROFF = 12
Const CONST_FORCE_LOGOFF = 4
Const CONST_FORCE_SHUTDOWN = 5
Dim objInstance, objEnumerator, cmdValue, intStatus

Select Case task
Case "logoff"
cmdValue = CONST_LOGOFF
Case "reboot"
cmdValue = CONST_REBOOT
Case "shutdown"
cmdValue = CONST_SHUTDOWN
End Select

Set objEnumerator = objService.ExecQuery("Select * From Win32_OperatingSystem", , 0)

For Each objInstance In objEnumerator
intStatus = objInstance.Win32ShutDown(cmdValue)
If intStatus = 0 Then
ShowStatus "System Function call successful."
Else
ShowStatus "System Function call failed!"
End If
Next
End Sub

Re: remoting access

Heath Stewart13-Jan-04 4:31

Help with MonthCalendar class

13-Jan-04 4:31

The WMI support in .NET is superb. The best way to do this is to create a new project, then open your Server explorer (the "Server" tab next to the "Toolbox" in the default VS.NET installation) add your computer unders Servers (if it isn't already), then drill-down the find the Management Classes node. If you don't see them, download the setup at http://go.microsoft.com/fwlink/?LinkId=3353[^].

Now find the Operating Systems node. Right-click and click Generate Managed Class. Now you have the Win32_OperatingSystem class encapsulated in a .NET class you can use in many ways! This will have several methods for what you need, such as a Shutdown and Reboot method.

You can then, for example, reboot a named machine like so:

ManagementScope scope = new ManagementScope(
  string.Format(@"\\{0}\ROOT\CIMV2", name));
Sample.ROOT.CIMV2.OperatingSystem.OperatingSystemCollection systems = 
  Sample.ROOT.CIMV2.OperatingSystem.GetInstances(scope, null, null);
foreach (Sample.ROOT.CIMV2.OperatingSystem system in systems)
  system.Reboot();

Sample is the just the namespace I used to write the example code. The Sample.ROOT.CIMV2 namespaces and the classes and nested classes therein where generated from the step above.

KingTermite12-Jan-04 15:18

12-Jan-04 15:18

Could somebody give me a smidge of help with the System.Windows.Forms.MonthCalendar class? Or at least point me to some good tutorials using it.

All I'm trying to do at this point is this:
After a user has selected some dates in it, I'd like to go through the entire range of dates (or at least a reasonable portion) and get all selected dates that the user selected. I want to store those dates into an array of DateTime objects.

Any help or pointers? Thanks.

There are only 10 types of people in this world....those that understand binary, and those that do not.

Heath Stewart13-Jan-04 3:41

13-Jan-04 3:41

You can use the SelectionRange (or the SelectionStart and SelectionEnd properties) to iterate between the start and end dates. You cold either temporarily add these to a growable ArrayList, or calculate the number of elements a DateTime[] array would require. The following uses the latter method:

TimeSpan span = monthCal.SelectionEnd - monthCal.SelectionStart;
int count = span.Days + 1; // Subtraction of days requires that you add 1.
DateTime[] dts = new DateTime[count];
for (int i=0; i<count; i++)
  dts[i] = monthCal.SelectionStart + new TimeSpan(1, 0, 0, 0);

KingTermite13-Jan-04 4:27

13-Jan-04 4:27

Thanks for the reply. That looks fairly straightforward. I'm not familiar with the TimeSpan class (yet), but it looks relatively straightwforward.

But this allows me to traverse it....is there anything in that TimeSpan class that lets me see whether the date in question is selected (highlighted in the control) or not?

There are only 10 types of people in this world....those that understand binary, and those that do not.

Heath Stewart13-Jan-04 4:37

13-Jan-04 4:37

The TimeSpan structure - not class (read the SDK documentation for more details) - just represents a difference in relation to a DateTime. The MonthCalendar class only exposes a SelectionStart and SelectionEnd date (the SelectionRange only contains these two properties as well). The TimeSpan has nothing to do with this. See the MonthCalendar documentation in the .NET Framework SDK for more details.

KingTermite13-Jan-04 5:43

13-Jan-04 5:43

Yes, I see how I could use that to select a certain day, but how from there can I tell if that day has been selected/highlighted by the user? I've gone through documentation and this is my primary problem.

Thanks though. Smile | :)

There are only 10 types of people in this world....those that understand binary, and those that do not.

Heath Stewart13-Jan-04 5:50

13-Jan-04 5:50

As I keep saying, you must iterate through the dates between the MonthCalendar.SelectionStart and MonthCalendar.SelectionEnd dates. That snippet of code I posted the first time does this. The TimeSpan merely adds i days to the SelectionState DateTime and adds that to the array. The SelectionRange is contiquous to simply iterating inclusively between the SelectionStart and SelectionEnd dates is how you get an array of the selected dates.

KingTermite13-Jan-04 6:02

13-Jan-04 6:02

How exactly, then, is it determining if the date was selected/highlighted? That snipped just appears to go through all the dates. Does the SelectionRange only give dates that were selected?

BTW....I'm at work now and unable to play with the code in question ("my own" code at home)....so I'm going by memory (e.g. code is not in front of me). That's why I'm unable to put this in and test and see what you mean.

There are only 10 types of people in this world....those that understand binary, and those that do not.

Heath Stewart13-Jan-04 6:47

13-Jan-04 6:47

As I've mentioned a couple times now, the SelectionRange is inclusive, meaning that every date between MonthCalendar.SelectionStart and MonthCalendar.SelectionEnd is selected. Unless there's some undocumented feature of the MonthCalendar or you've extended and overridden its behavior, this is how the MonthCalendar works - a single date range can be selected.

Now, if you want to track every selection the user makes, handle the MonthCalendar.DateSelected event and add the range from DateRangeEventArgs.Start and DateRangeEventArgs.End to an ArrayList or something, which you can later use ArrayList.CopyTo to create an array from the list.

KingTermite15-Jan-04 14:49

15-Jan-04 14:49

I've got it now and am only posting it here now for posterity. I must have been pretty tired when I worked on it last because it was right there as obvious as could be. I swear I went through the docs on the MonthCalendar class about 5 times and didn't see what I wanted, but NOW I see there is a property BoldedDates which returns to me an array of DateTime[] of all the dates that are bolded. Which is EXACTLY what I was trying to get.

Why it was so hard, I don't know. Like I said...I must have been tired...it was late last Saturday or Sunday night when I played with it last.

There are only 10 types of people in this world....those that understand binary, and those that do not.

Heath Stewart16-Jan-04 3:42